I've just updated my S8 to Oreo trough Odin. I'd like to know if is possibile to root and install TWRP.
Thanks
Inviato dal mio SM-G950F utilizzando Tapatalk
mattvene said:
I've just updated my S8 to Oreo trough Odin. I'd like to know if is possibile to root and install TWRP.
Thanks
Inviato dal mio SM-G950F utilizzando Tapatalk
Click to expand...
Click to collapse
Wow, how? Where did you download the firmware from?
virafhavewalla said:
Wow, how? Where did you download the firmware from?
Click to expand...
Click to collapse
Its been released for some eu countries
virafhavewalla said:
Wow, how? Where did you download the firmware from?
Click to expand...
Click to collapse
Following this guide:
https://forum.xda-developers.com/galaxy-s8/how-to/discussion-oreo-final-t3746561/page1.
It works only for Exynos version.
Inviato dal mio SM-G950F utilizzando Tapatalk
Yes you can. If you're running stock then flash SuperSU if you would like TWRP to be able to mount \data. Otherwise Magisk works fine too.
mattvene said:
I've just updated my S8 to Oreo trough Odin. I'd like to know if is possibile to root and install TWRP.
Thanks
Inviato dal mio SM-G950F utilizzando Tapatalk
Click to expand...
Click to collapse
You'll lose knox, did you know that?... but if you don't care about, go for it
cmauribon said:
You'll lose knox, did you know that?... but if you don't care about, go for it
Click to expand...
Click to collapse
Yes, I know. I come from Renovate Ice Custom rom so my knox is already tripped. I'd like to know what version of TWRP I should flash or if I need to wait a newer version to be released.. I've looked for around but I can't find anything.
Inviato dal mio SM-G950F utilizzando Tapatalk
Sjant said:
Yes you can. If you're running stock then flash SuperSU if you would like TWRP to be able to mount \data. Otherwise Magisk works fine too.
Click to expand...
Click to collapse
Ok, TWRP 3.2.1.0 should be fine?
Inviato dal mio SM-G950F utilizzando Tapatalk
Oreo bootloader (v3) block motherboard. You never can root your phone, never. If you try to put twpr you make a hard brick. Forget to root your phone for the rest.
mattvene said:
Ok, TWRP 3.2.1.0 should be fine?
Inviato dal mio SM-G950F utilizzando Tapatalk
Click to expand...
Click to collapse
Yep perfectly fine.
After I upgraded to CRAP via Odin twrp 3.2.1-0 is unable to mount data. Any idea why?
amon-san said:
After I upgraded to CRAP via Odin twrp 3.2.1-0 is unable to mount data. Any idea why?
Click to expand...
Click to collapse
You have to wait 7 days for oem-unlock to appear there's a whole thread on the subject
StackOverflow13 said:
You have to wait 7 days for oem-unlock to appear there's a whole thread on the subject
Click to expand...
Click to collapse
Then how come it's unlocked as I'm writing this?
Anyways, maybe the thread has answers. Can you throw in a link please?
amon-san said:
Then how come it's unlocked as I'm writing this?
Anyways, maybe the thread has answers. Can you throw in a link please?
Click to expand...
Click to collapse
Your's is probably because you were on stock already for 7+ days see post #41 here https://forum.xda-developers.com/galaxy-s8+/how-to/guide-how-to-flash-crap-using-odin-t3748555/page5
Did you install no verity zip? after you flash you need to format data
Read this carefully & follow exactly or you will lose your stock install https://forum.xda-developers.com/galaxy-s8/samsung-galaxy-s8--s8-cross-device-development/recovery-twrp-galaxy-s8-exynos-t3595102
StackOverflow13 said:
Your's is probably because you were on stock already for 7+ days see post #41 here https://forum.xda-developers.com/galaxy-s8+/how-to/guide-how-to-flash-crap-using-odin-t3748555/page5
Did you install no verity zip? after you flash that you need to format data
Read this carefully & follow exactly or you will lose your stock install https://forum.xda-developers.com/galaxy-s8/samsung-galaxy-s8--s8-cross-device-development/recovery-twrp-galaxy-s8-exynos-t3595102
Click to expand...
Click to collapse
i did with the 5.1 no verity
is that too old? do i need to use the 6.0 from over here? https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
amon-san said:
i did with the 5.1 no verity
is that too old? do i need to use the 6.0 from over here? https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
Click to expand...
Click to collapse
I don't think it's too old not sure to be honest. the last part as i said is to format data if you follow the guide in the link i gave, you should be fine after that.
StackOverflow13 said:
I don't think it's too old not sure to be honest. the last part as i said is to format data if you follow the guide in the link i gave, you should be fine after that.
Click to expand...
Click to collapse
i did the bit with the format, was able to mount data, write my backup, reboot into recovery again, mount data
but when i rebooted the phone to the OS and then to recovery again, data was not able to mount, again.
amon-san said:
i did the bit with the format, was able to mount data, write my backup, reboot into recovery again, mount data
but when i rebooted the phone to the OS and then to recovery again, data was not able to mount, again.
Click to expand...
Click to collapse
did you mount all partitions?, once you have done that reboot straight to recovery.
StackOverflow13 said:
did you mount all partitions?, once you have done that reboot straight to recovery.
Click to expand...
Click to collapse
i'm not sure what you mean. when i mount and reboot the mount is gone, is it not?
amon-san said:
i'm not sure what you mean. when i mount and reboot the mount is gone, is it not?
Click to expand...
Click to collapse
No its fine. You said you did a backup yes? if so that means everything is working, don't worry about the mount options after that, they auto mount when you need them
Related
Hi, i receved ota 4.3 but i can't install it because i have trwp recovery. I'm without pc so i thought i need a zip with the recovery stock., but i don't find it anywhere. Someone please can hp me?
Inviato dal mio Nexus 7 con Tapatalk 2
The reason for the ota not working has nothing to do with twrp
Sent from my Galaxy Nexus
Pirateghost said:
The reason for the ota not working has nothing to do with twrp
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
I always read that to instal upgrade with ota the tablet have to be all stock (no recovery custom, no sistem modify etc...)
Isn't so?
By the way, if i install the 4.3 on 4.2.2 in recovery mode, i have to do all wipes?... I can't install again all my apps during this holyday...
Thanks
ulysse75 said:
Hi, i receved ota 4.3 but i can't install it because i have trwp recovery. I'm without pc so i thought i need a zip with the recovery stock., but i don't find it anywhere. Someone please can hp me?
Inviato dal mio Nexus 7 con Tapatalk 2
Click to expand...
Click to collapse
I had the same problem, but flashing the 2.6.0.0 TWRP hepled. http://techerrata.com/file/twrp2/grouper/openrecovery-twrp-2.6.0.0-grouper.img
Then to find the 4.3. system update for your Neuxs 7, you will have to clear data for Google Services Framework
Check the system update again and let it install it self.
Let me know if that worked for you.
I've been thinking about rooting my G2 for bluetooth sixaxis support but intend on updating too kitkat when it is released.
I'm aware I would loose my root access but will I be able to update OTA once the update arrives? Or will restoring the phone be required?
Sent from my LG-D803 using Tapatalk
Big4570 said:
I've been thinking about rooting my G2 for bluetooth sixaxis support but intend on updating too kitkat when it is released.
I'm aware I would loose my root access but will I be able to update OTA once the update arrives? Or will restoring the phone be required?
Sent from my LG-D803 using Tapatalk
Click to expand...
Click to collapse
As mentioned a zillion times, accepting OTA with root or custom recovery is a one way street to Bricksville
LenAsh said:
As mentioned a zillion times, accepting OTA with root or custom recovery is a one way street to Bricksville
Click to expand...
Click to collapse
Not really. I'm rooted and have tried to take Sprint's OTA a couple times. It just seems to fail and reboots normally, no changes.
LenAsh said:
As mentioned a zillion times, accepting OTA with root or custom recovery is a one way street to Bricksville
Click to expand...
Click to collapse
WhiteZero said:
Not really. I'm rooted and have tried to take Sprint's OTA a couple times. It just seems to fail and reboots normally, no changes.
Click to expand...
Click to collapse
Don't encourage people to do things which are known to cause problems.
I would root and flash a stock based ROM. After kitkat is released someone will make a new ROM from the update.
Sent from my LG-VS980 using xda app-developers app
So after rooting there's no way to go back to entirely stock LG ROM for OTAS in the future?
Sensamic said:
So after rooting there's no way to go back to entirely stock LG ROM for OTAS in the future?
Click to expand...
Click to collapse
Restore stock recovery should do it.
Remember kids, back up your EFS. FreeGee can do it, TWRP can as well.
Hi.
If i will root the phone and will maintaine stock recovery,i wil able to receive ota update ?
Inviato dal mio LG-D802 con Tapatalk 2
Inviato dal mio LG-D802 con Tapatalk 2
ziociccio said:
Hi.
If i will root the phone and will maintaine stock recovery,i wil able to receive ota update ?
Inviato dal mio LG-D802 con Tapatalk 2
Inviato dal mio LG-D802 con Tapatalk 2
Click to expand...
Click to collapse
Perhaps not advisable just in case.......however, if you are completely stock including stock recovery but you have rooted you can install an ota successfully. At least it worked for me. I received an ota notice whilst on 10a (and whilst very drunk) and whilst rooted stock and it updated successfully to 10f. Also, my root was still in tact.
I wouldn't advise to try this until it has been clarified by someone of greater knowledge than myself however. At the moment, many are of the opinion that this may brick your device. If I had have been sober, I wouldn't have tried this and it may just be the case that I have been lucky.
bobsie41 said:
Perhaps not advisable just in case.......however, if you are completely stock including stock recovery but you have rooted you can install an ota successfully. At least it worked for me. I received an ota notice whilst on 10a (and whilst very drunk) and whilst rooted stock and it updated successfully to 10f. Also, my root was still in tact.
I wouldn't advise to try this until it has been clarified by someone of greater knowledge than myself however. At the moment, many are of the opinion that this may brick your device. If I had have been sober, I wouldn't have tried this and it may just be the case that I have been lucky.
Click to expand...
Click to collapse
Taking the OTA when rooted is fine as long as you have the stock recovery. If you have twrp or cwm then it's bootloop time where you just boot to recovery. If that happens and you have access to adb you can delete the fota and it'll boot normally again.
Ok.
Then,i can root,maintaning stock recovery and i can receive ota without problems or bootloop after update.
You confirm?
Inviato dal mio LG-D802 con Tapatalk 2
ziociccio said:
Ok.
Then,i can root,maintaning stock recovery and i can receive ota without problems or bootloop after update.
You confirm?
Inviato dal mio LG-D802 con Tapatalk 2
Click to expand...
Click to collapse
I did.
ziociccio said:
Ok.
Then,i can root,maintaning stock recovery and i can receive ota without problems or bootloop after update.
You confirm?
Inviato dal mio LG-D802 con Tapatalk 2
Click to expand...
Click to collapse
Yeah it worked for me and maintained root.
khaytsus said:
Don't encourage people to do things which are known to cause problems.
Click to expand...
Click to collapse
I'm not encouraging it. Simply stating the fact that it's not a guaranteed brick if you're just rooted.
Hi guys,
TWRP 3.0.0 has just been released. Did any of you flash it?
I did not yet as I am trying a rom and don't need to flash anything until next week.
How about the following points?
- backup/restore ==> Does not map correctly efs, thus does not back it up.
- encryption ==> Confirmed OK on COS 12.1 by @geowolf1000, but failed on several CM13 (Sultan's version + official nightlies) data partition with no logic found yet. It seems to depend if encryption has been made on a CM12 then upgrade to CM13 or directly under CM13.
- f2fs support ==> Confirmed OK by @Haiqal Johari
- modems/firmwares flash ability ==> Confirmed OK by @Haiqal Johari
Unless there is one thread already, that might be good to centralize the feedbacks.
Download link ==> https://dl.twrp.me/bacon/
Official thread in OPO Original Android Development section ==> http://forum.xda-developers.com/showthread.php?t=2766186
Flashed the new version through TWRP 2.8.7.0.5 materialized. Good interface and quite smoother than the 2.8.7.0.5.
After that i flashed the BlissPop 6.0 Chimera (Hybrid-CAF) and it has booted succesfully.
The rest i did't tied it but i prefer much more the 3.0.0 version than others.
Also decrypt successfully for me
I did not test firmwares because latest cos 12. 1..1 works great to my needs
Anghirrim said:
Hi guys,
TWRP 3.0.0 has just been released. Did any of you flash it?
I did not yet as I am trying a rom and don't need to flash anything until next week.
How about the following points?
- backup/restore
- encryption
- f2fs support
- modems/firmwares flash ability
Unless there is one thread already, that might be good to centralize the feedbacks.
Click to expand...
Click to collapse
Can you put the download link in the first post?
Inviato dal mio A0001 utilizzando Tapatalk
F2FS running flawlessly.
Flashed firmware successfully.
Really willing to try and give feedback, but I can't find the download link anywhere. Can someone link it to me?
Here is the download link
Here you go guys !
https://dl.twrp.me/bacon/twrp-3.0.0-0-bacon.img.html
I just downloaded this and am gonna try it out now. I do not use Encryption so wont be testing that
loperaster09 said:
Really willing to try and give feedback, but I can't find the download link anywhere. Can someone link it to me?
Click to expand...
Click to collapse
Here it is https://dl.twrp.me/bacon/twrp-3.0.0-0-bacon.img.html
Inviato dal mio A0001 utilizzando Tapatalk
Decrypting a CM13 data partition does not work.
albi97x said:
Can you put the download link in the first post?
Inviato dal mio A0001 utilizzando Tapatalk
Click to expand...
Click to collapse
Done, it's on the official TWRP page.
Using it
Anghirrim said:
Hi guys,
TWRP 3.0.0 has just been released. Did any of you flash it?
I did not yet as I am trying a rom and don't need to flash anything until next week.
How about the following points?
- backup/restore
- encryption
- f2fs support
- modems/firmwares flash ability
Unless there is one thread already, that might be good to centralize the feedbacks.
Click to expand...
Click to collapse
Factory wipe takes little time
Other wise it looks and works good
nirmalprajanxda said:
Factory wipe takes little time
Other wise it looks and works good
Click to expand...
Click to collapse
OK thanks.
Well... Flashed the 3.0.0 version from the 2.8.6.0 and it does not boot into recovery anymore (stuck on the 1+ logo). I'll have to flash it using fastboot I guess.
Edit: Solved, I just had a bad download (file less than 1Mo). Strange that TWRP 2.8.6.0 flashed it anyway...
Anghirrim said:
Hi guys,
TWRP 3.0.0 has just been released. Did any of you flash it?
Click to expand...
Click to collapse
Thanks! Runs!
Unfortunately twrp-3.0.0-0-bacon has not EFS Partition for Backup! What is not good.
For comparison twrp-3.0.0-0-hammerhead has EFS Partition for Backup.
That is why I have flashed twrp-3.0.0-0-bacon-20160206_efs.img which has EFS Partition for Backup.
Link - https://www.androidfilehost.com/?fid=24399994186369589
Mirror on MEGA - https://mega.nz/#!4YUFBILY!br6UWoA-STJpbpER899Uh5cTCZv7INm3qeGXiEaxKLU
Just flashed. Really like the materialUI, and it gives you a few more settings
If you have any problem with the official one you can try this one: (Not made by me, made by: @ketut.kumajaya): https://www.androidfilehost.com/?fid=24399994186369589
Im with it and any problem untill now.
it takes forever to wipe the system partition
Vekhez said:
it takes forever to wipe the system partition
Click to expand...
Click to collapse
System is long yes, but cache is even worse in a factory wipe.
It took something like four to five minutes.
Anghirrim said:
System is long yes, but cache is even worse in a factory wipe.
It took something like four to five minutes.
Click to expand...
Click to collapse
Oh, I never use the factory wipe I always use advanced and wipe all 4 partitions.
Hi guys,
With the idea to help people unbrick their phones and also to be able to downgrade from MM to LP easier, I have uploaded the latest raw firmware for ZOOA on Mega.
Please, while you will find this useful, don't forget to press my thanks button.
Download link: https://mega.nz/#!MRtTCCzZ!c2qoqIX8drgNRy2KxPV_iiBVKHoW2ppFdwRUsLjIWq4
Note: You need to use "Asus flash tool" to flash it. Mega Mirror Link : https://mega.nz/#!JF91lazI!lQSdQcN5YXIFsaCWtTVHfsvGK1u82NKvy8-X9XIfR0g
Flashing this raw firmware won't relock your bootloader.
Reserved
How to install this??
ayush.gl said:
How to install this??
Click to expand...
Click to collapse
Use the ASUS flash tool
Lock the bootloader? I used the app asus to unlock the bootloader and does not want to block again, no solution?
cl3i550nBR said:
Lock the bootloader? I used the app asus to unlock the bootloader and does not want to block again, no solution?
Click to expand...
Click to collapse
What do you want to do now? Do you want to relock your bootloader?
Flashing this raw firmware won't lock your bootloader.
Does this firmware vers. cause issues with recovery?
Yousvel said:
Hi guys,
Flashing this raw firmware won't relock your bootloader.
Click to expand...
Click to collapse
So I got this OTA update before I finally decided to root/unlock/etc my device. After success with rooting and unlocking the bootloader, I simply can not get any custom recovery to work. Sadly I have seen the problem mentioned several times here on this forum with no answers.
Basically, after a successful installation of a recovery (via android terminal method or pc/fastboot method), I'll boot the phone into fastboot, then select 'recovery.' Screen goes to black, vibrates twice, and reboots to fastboot instead. Only after I boot normally, then reboot into fastboot and try to select recovery again does it boot into a error message (instead of bootlooping), and after 30 secs it loads what I assume is some version of stock recovery.
Can OP ( or anyone else) lend their thoughts?
ztoundas said:
So I got this OTA update before I finally decided to root/unlock/etc my device. After success with rooting and unlocking the bootloader, I simply can not get any custom recovery to work. Sadly I have seen the problem mentioned several times here on this forum with no answers.
Basically, after a successful installation of a recovery (via android terminal method or pc/fastboot method), I'll boot the phone into fastboot, then select 'recovery.' Screen goes to black, vibrates twice, and reboots to fastboot instead. Only after I boot normally, then reboot into fastboot and try to select recovery again does it boot into a error message (instead of bootlooping), and after 30 secs it loads what I assume is some version of stock recovery.
Can OP ( or anyone else) lend their thoughts?
Click to expand...
Click to collapse
This has absolutely zero issue with flashing custom recovery.
Yousvel said:
This has absolutely zero issue with flashing custom recovery.
Click to expand...
Click to collapse
Well there's comfort in knowing that, I suppose.
its not work for me..
it write to me: check the detected serial number failure(not fount the device)
what can i do?
Yousvel said:
Hi guys,
With the idea to help people unbrick their phones and also to be able to downgrade from MM to LP easier, I have uploaded the latest raw firmware for ZOOA on Mega.
Please, while you will find this useful, don't forget to press my thanks button.
Download link: https://mega.nz/#!MRtTCCzZ!c2qoqIX8drgNRy2KxPV_iiBVKHoW2ppFdwRUsLjIWq4
Note: You need to use "Asus flash tool" to flash it. Mega Mirror Link : https://mega.nz/#!JF91lazI!lQSdQcN5YXIFsaCWtTVHfsvGK1u82NKvy8-X9XIfR0g
Flashing this raw firmware won't relock your bootloader.
Click to expand...
Click to collapse
How did you made that? Want to make a raw version of MM 134. Thanks in advance
Inviato dal mio ASUS_Z00AD utilizzando Tapatalk
Brazilian people souldnt update to MM. This update is breaking all sensors in the device.
More: http://www.asus.com/zentalk/thread-98565-1-1.html
Giovix92 said:
How did you made that? Want to make a raw version of MM 134. Thanks in advance
Inviato dal mio ASUS_Z00AD utilizzando Tapatalk
Click to expand...
Click to collapse
Actually I didnt make it. I downloaded it from 4pda.
Yousvel said:
Actually I didnt make it. I downloaded it from 4pda.
Click to expand...
Click to collapse
Okay, can you link me the thread of 4pda? Thanks in advance
Inviato dal mio ASUS_Z00AD utilizzando Tapatalk
Giovix92 said:
Okay, can you link me the thread of 4pda? Thanks in advance
Inviato dal mio ASUS_Z00AD utilizzando Tapatalk
Click to expand...
Click to collapse
People do post 4pda link here, But I don't want to do it myself because xda does not accept 4pda link to be posted here. Sorry my friend.
Yousvel said:
People do post 4pda link here, But I don't want to do it myself because xda does not accept 4pda link to be posted here. Sorry my friend.
Click to expand...
Click to collapse
No worries, via pm?
Inviato dal mio K016 utilizzando Tapatalk
noob question
Yousvel said:
Actually I didnt make it. I downloaded it from 4pda.
Click to expand...
Click to collapse
i was wondering if one can unzip the .zip file and convert it again to .raw format will that be flashable via asus flash tool?
Link does not work
ASUS ZENFONE 2 | Z3560 1.8 Ghz | 2 Gb RAM
@Polis4 http://forum.xda-developers.com/showpost.php?p=68392220
Polis4 said:
Link does not work
ASUS ZENFONE 2 | Z3560 1.8 Ghz | 2 Gb RAM
Click to expand...
Click to collapse
All the links are working fine.
Hello guys, today i'm here to present you a new tool made by me: a Semi-auto rooter for ZE551ML.
It only roots your device and install magisk, a tool for managing SELinux and root. Root is based on magisk, so if you need to run an app that requires an unrooted device, you Can toggle root access easily and then reenable them.
Xposed tool: You Can find it in downloads section!
It maybe work on that phones that had locked bootloader on LP, i'm not sure, but it's good if you previously have unlocked bootloader before upgrading to MM.
Needs tester for ZE550ML!!
FAQs:
What it does do?
Simply it boots a TWRP and sideload some files, but you need to do few steps before proceeding.
Why need I to do some steps?
Because I cannot do a fully-auto script because recovery is only temporary.
My ZxxyzXY device is supported?
I'll try to support more device as much as I Can do. For now files are only for ZE551ML.
Why I should firstly root my device and then use xposed tool?
Because you need firstly to install Magisk v6 using root tool.
Downloads of root tool:
V1.1: https://mega.nz/#!FRd3SABB!-Jz6hSWOPqglXqKwtgHjqHHVO4-ehFQKTX0o53YpvkY
V1.0: https://mega.nz/#!0VUGWK6R!vNavnpdEK3GJ6V1F2I5yvNoxDuoLVX1ZWPRMOHZ_BX4
Click to expand...
Click to collapse
Downloads of xposed tool:
V1.0:https://mega.nz/#!lEFi0BiI!_UCK2oziwNvAvZvuavLYoxroXRnhMMP1Bl0SjWAznGY
Click to expand...
Click to collapse
[/HIDE]
Changelog:
V1.1:
-Added a Language selector and the english Language!
-Optimized code, +3kb bigger
V1.0:
Initial Release
Useful links:
Magisk Manager: http://forum.xda-developers.com/android/software/mod-magisk-v1-universal-systemless-t3432382
phh's SuperUser: https://play.google.com/store/apps/details?id=me.phh.superuser&hl=en
Xposed Material Design Xposed: http://forum.xda-developers.com/xposed/material-design-xposed-installer-t3137758
Credits:
@topjohnwu for:
-Magisk v6
-Phh's superuser Magisk version
-xposed x86 v86.5 Magisk Version @shakalaca for his beta root guide @bahaa87 for download links
Some of my friends that gave me this idea @Flynhx for useful Links
If you have any question/problem, write me here!
Regards,
Giovix92
Inviato dal mio ASUS_Z00AD utilizzando Tapatalk
Can you write some intro plz.
Does it work with MM with locked bootloader?
Can I use it to install xposed?
Thank you very much
Let us know if you try it
bahaa87 said:
Can you write some intro plz.
Does it work with MM with locked bootloader?
Can I use it to install xposed?
Thank you very much
Click to expand...
Click to collapse
Okay, wait some mins.
Yes, it works on locked bootloader (MM only) but requires a previously unlocked bootloader on LP before upgrading to MM.
No, you can't install xposed for now, i'll create another script for that
You're welcome
Inviato dal mio ASUS_Z00AD utilizzando Tapatalk
biondo_92 said:
Let us know if you try it
Click to expand...
Click to collapse
Already used it, it's working fine
Inviato dal mio ASUS_Z00AD utilizzando Tapatalk
Thanks a lot. Well done.
Did not work though, locked bootloader, I don't remember actually if have unlocked it before or not
Someone tried if it works with locked bootloader? (i mean locked even before upgrade)
beyarfaj2004 said:
Thanks a lot. Well done.
Did not work though, locked bootloader, I don't remember actually if have unlocked it before or not
Click to expand...
Click to collapse
If you didn't unlocked bootloader before it'll not work at 70%
Inviato dal mio ASUS_Z00AD utilizzando Tapatalk
For example, i've successfully rooted my phone using this script, perhaps can you make an unroot/uninstall script for that too? just incase i want to revert back to clean stock.
Sent from my ASUS_Z00AD using XDA-Developers mobile app
Flynhx said:
For example, i've successfully rooted my phone using this script, perhaps can you make an unroot/uninstall script for that too? just incase i want to revert back to clean stock.
Sent from my ASUS_Z00AD using XDA-Developers mobile app
Click to expand...
Click to collapse
Good idea, i'll create the same zip but Just uninstalling magisk. But you need firstly to unroot
Inviato dal mio ASUS_Z00AD utilizzando Tapatalk
Doesn't work for me
It doesn't boot to twrp
It says no command
I unlocked bootloader on LP with unofficial way but before upgrade I flashed raw 194 file then upgrade to MM
How can I unlock bootloader on MM ?
bahaa87 said:
Doesn't work for me
It doesn't boot to twrp
It says no command
I unlocked bootloader on LP with unofficial way but before upgrade I flashed raw 194 file then upgrade to MM
How can I unlock bootloader on MM ?
Click to expand...
Click to collapse
If it says no Command it would be that you're in stock recovery. Please send me a Image of cmd and zenfone 2 After reboot
Inviato dal mio ASUS_Z00AD utilizzando Tapatalk
Giovix92 said:
If it says no Command it would be that you're in stock recovery. Please send me a Image of cmd and zenfone 2 After reboot
Inviato dal mio ASUS_Z00AD utilizzando Tapatalk
Click to expand...
Click to collapse
why not port magisk v6 better help @topjohnwu to make it workable to our zenfone 2
Where do you want me to screenshot exactly?
Druboo666 said:
why not port magisk v6 better help @topjohnwu to make it workable to our zenfone 2
Click to expand...
Click to collapse
It'll use Magisk V6 patched. You Can manage it with Magisk Manager (you Can find the apk easily in magisk thread)
Inviato dal mio ASUS_Z00AD utilizzando Tapatalk
bahaa87 said:
Where do you want me to screenshot exactly?
Click to expand...
Click to collapse
You need to send me an Image After the tools reboot the device (so, of the device) and a screenshot when it's booting TWRP. I'm making another version, so i'll verify if I Can do something for locked bootloaders
Inviato dal mio ASUS_Z00AD utilizzando Tapatalk
Updated to ver 1.1! Please check changelog!
Inviato dal mio ASUS_Z00AD utilizzando Tapatalk
Added xposed tool too! Check it out!
Inviato dal mio ASUS_Z00AD utilizzando Tapatalk
Can I change the su to SuperSu after using this tool?
Giovix92 said:
Added xposed tool too! Check it out!
Click to expand...
Click to collapse
Thank you it works like charm! Both Root tool and Xposed tool, my phone ZE551ML has unofficial unlocked bootloader before on LP though,
Can you please add uninstaller script for superuser, magisk & xposed? Just incase i want to un-root my device.
PS: I think you forgot to include these links, perhaps apk files for those apps..
Magisk Manager: http://forum.xda-developers.com/android/software/mod-magisk-v1-universal-systemless-t3432382
phh's SuperUser: https://play.google.com/store/apps/details?id=me.phh.superuser&hl=en
Xposed Material Design Xposed: http://forum.xda-developers.com/xposed/material-design-xposed-installer-t3137758