Hi guys,
TWRP 3.0.0 has just been released. Did any of you flash it?
I did not yet as I am trying a rom and don't need to flash anything until next week.
How about the following points?
- backup/restore ==> Does not map correctly efs, thus does not back it up.
- encryption ==> Confirmed OK on COS 12.1 by @geowolf1000, but failed on several CM13 (Sultan's version + official nightlies) data partition with no logic found yet. It seems to depend if encryption has been made on a CM12 then upgrade to CM13 or directly under CM13.
- f2fs support ==> Confirmed OK by @Haiqal Johari
- modems/firmwares flash ability ==> Confirmed OK by @Haiqal Johari
Unless there is one thread already, that might be good to centralize the feedbacks.
Download link ==> https://dl.twrp.me/bacon/
Official thread in OPO Original Android Development section ==> http://forum.xda-developers.com/showthread.php?t=2766186
Flashed the new version through TWRP 2.8.7.0.5 materialized. Good interface and quite smoother than the 2.8.7.0.5.
After that i flashed the BlissPop 6.0 Chimera (Hybrid-CAF) and it has booted succesfully.
The rest i did't tied it but i prefer much more the 3.0.0 version than others.
Also decrypt successfully for me
I did not test firmwares because latest cos 12. 1..1 works great to my needs
Anghirrim said:
Hi guys,
TWRP 3.0.0 has just been released. Did any of you flash it?
I did not yet as I am trying a rom and don't need to flash anything until next week.
How about the following points?
- backup/restore
- encryption
- f2fs support
- modems/firmwares flash ability
Unless there is one thread already, that might be good to centralize the feedbacks.
Click to expand...
Click to collapse
Can you put the download link in the first post?
Inviato dal mio A0001 utilizzando Tapatalk
F2FS running flawlessly.
Flashed firmware successfully.
Really willing to try and give feedback, but I can't find the download link anywhere. Can someone link it to me?
Here is the download link
Here you go guys !
https://dl.twrp.me/bacon/twrp-3.0.0-0-bacon.img.html
I just downloaded this and am gonna try it out now. I do not use Encryption so wont be testing that
loperaster09 said:
Really willing to try and give feedback, but I can't find the download link anywhere. Can someone link it to me?
Click to expand...
Click to collapse
Here it is https://dl.twrp.me/bacon/twrp-3.0.0-0-bacon.img.html
Inviato dal mio A0001 utilizzando Tapatalk
Decrypting a CM13 data partition does not work.
albi97x said:
Can you put the download link in the first post?
Inviato dal mio A0001 utilizzando Tapatalk
Click to expand...
Click to collapse
Done, it's on the official TWRP page.
Using it
Anghirrim said:
Hi guys,
TWRP 3.0.0 has just been released. Did any of you flash it?
I did not yet as I am trying a rom and don't need to flash anything until next week.
How about the following points?
- backup/restore
- encryption
- f2fs support
- modems/firmwares flash ability
Unless there is one thread already, that might be good to centralize the feedbacks.
Click to expand...
Click to collapse
Factory wipe takes little time
Other wise it looks and works good
nirmalprajanxda said:
Factory wipe takes little time
Other wise it looks and works good
Click to expand...
Click to collapse
OK thanks.
Well... Flashed the 3.0.0 version from the 2.8.6.0 and it does not boot into recovery anymore (stuck on the 1+ logo). I'll have to flash it using fastboot I guess.
Edit: Solved, I just had a bad download (file less than 1Mo). Strange that TWRP 2.8.6.0 flashed it anyway...
Anghirrim said:
Hi guys,
TWRP 3.0.0 has just been released. Did any of you flash it?
Click to expand...
Click to collapse
Thanks! Runs!
Unfortunately twrp-3.0.0-0-bacon has not EFS Partition for Backup! What is not good.
For comparison twrp-3.0.0-0-hammerhead has EFS Partition for Backup.
That is why I have flashed twrp-3.0.0-0-bacon-20160206_efs.img which has EFS Partition for Backup.
Link - https://www.androidfilehost.com/?fid=24399994186369589
Mirror on MEGA - https://mega.nz/#!4YUFBILY!br6UWoA-STJpbpER899Uh5cTCZv7INm3qeGXiEaxKLU
Just flashed. Really like the materialUI, and it gives you a few more settings
If you have any problem with the official one you can try this one: (Not made by me, made by: @ketut.kumajaya): https://www.androidfilehost.com/?fid=24399994186369589
Im with it and any problem untill now.
it takes forever to wipe the system partition
Vekhez said:
it takes forever to wipe the system partition
Click to expand...
Click to collapse
System is long yes, but cache is even worse in a factory wipe.
It took something like four to five minutes.
Anghirrim said:
System is long yes, but cache is even worse in a factory wipe.
It took something like four to five minutes.
Click to expand...
Click to collapse
Oh, I never use the factory wipe I always use advanced and wipe all 4 partitions.
Related
This just FYI...
Kindly dont try taking full backup of Lollipop (Brazil Soak version ) using TWRP... It will cause bootloop.... you need to do factory reset to get back to your phone work...
Just a FYI...
padhu1989 said:
This just FYI...
Kindly dont try taking full backup of Lollipop (Brazil Soak version ) using TWRP... It will cause bootloop.... you need to do factory reset to get back to your phone work...
Just a FYI...
Click to expand...
Click to collapse
Does TWRP is working?
TheKrates said:
Does TWRP is working?
Click to expand...
Click to collapse
Partially working...
TheKrates said:
Does TWRP is working?
Click to expand...
Click to collapse
Partially working
padhu1989 said:
Partially working
Click to expand...
Click to collapse
CWM and Philz Touch Recovery?
twrp is working to backup for me... Data system and cache with no issues or bootloops.... Backup and restore both work fine
TheKrates said:
CWM and Philz Touch Recovery?
Click to expand...
Click to collapse
CWM works fine.
Lemagex said:
twrp is working to backup for me... Data system and cache with no issues or bootloops.... Backup and restore both work fine
Click to expand...
Click to collapse
OP most likely just ran out of space...
Lemagex said:
twrp is working to backup for me... Data system and cache with no issues or bootloops.... Backup and restore both work fine
Click to expand...
Click to collapse
which version you are using? i am using the latest version
knizmi said:
OP most likely just ran out of space...
Click to expand...
Click to collapse
I had 9 GB of space before taking a backup.. dont think you are the smartest in the world...
padhu1989 said:
I had 9 GB of space before taking a backup.. dont think you are the smartest in the world...
Click to expand...
Click to collapse
Touchy, are we?
1. I don´t think I´m the smartest person in the world and that´s why I used the words "most likely".
2. You got better explanation, why others have no problem with TWPR backups? Besides, backup just creates a couple of big files - this can´t render your phone unbootable by itself.
2a. There are guides that tell you how to restore a Lollipop TWRP backup so that you can enjoy Lollipop on unsupported devices. Obviously backup worked for those people as well, so it´s not just Lemagex in post #6 for whom it works ...
I flashed a zip through TRWP and its works. But I didn't try to do a nandroid backup yet.
This also happened to me. I'm using TWRP 2.8.x i have a thread in the q&a section. Some said the 2.7 is working with lollipop but haven't tested yet.
padhu1989 said:
which version you are using? i am using the latest version
Click to expand...
Click to collapse
I'm using 2.7 and please refrain from being rude to others on the forums or you're less likely to get help...
padhu1989 said:
This just FYI...
Kindly dont try taking full backup of Lollipop (Brazil Soak version ) using TWRP... It will cause bootloop.... you need to do factory reset to get back to your phone work...
Just a FYI...
Click to expand...
Click to collapse
XT1033 or XT1032 ? On XT1032 TWRP work just fine, at least for me.
torque said:
XT1033 or XT1032 ? On XT1032 TWRP work just fine, at least for me.
Click to expand...
Click to collapse
XT1033 for me and it works fine too.
Philz touch is working just fine!
Found this on russian forum
Its a twrp backup from the EU version 20.74
Download
alternative link
Here's a link for those that don't want to go through a million ads.
Has anyone tried this rom?
Is there any changelog?
Got it, and it is working fine after full wipe...
Can i flash it over the 20.69 EU?
Inviato dal mio XT890 utilizzando Tapatalk
samuclock said:
Can i flash it over the 20.69 EU?
Inviato dal mio XT890 utilizzando Tapatalk
Click to expand...
Click to collapse
YES. You can try it without DATA Wipe first. If you have issues with someapp´s or current settings you can make a Data Wipe later. Just make a complete TWRP Backup before restoring this SYSTEM Image
soo no 4.4.2 ota update of your phone bootloader locked?
Anyone got root working on this one ?
f3bruary said:
Anyone got root working on this one ?
Click to expand...
Click to collapse
You can find the latest (CWM / TWRP / MobileODIN installable ZIP) from here.
Deep-Knight said:
Got it, and it is working fine after full wipe...
Click to expand...
Click to collapse
Hi ,
when you say full wipe, what do you mean ?
In TWRP, which options should I select ?
Many thanks
Shizeltoff said:
Hi ,
when you say full wipe, what do you mean ?
In TWRP, which options should I select ?
Many thanks
Click to expand...
Click to collapse
Wipe System , Wipe Data and Wipe Cache...
Deep-Knight said:
Wipe System , Wipe Data and Wipe Cache...
Click to expand...
Click to collapse
Thank's !!! it worked !! :good::good:
Hi, i have another question.. Can i restore this backup over cyanogenmod 11 (4.4.4)?
Thx
samuclock said:
Hi, i have another question.. Can i restore this backup over cyanogenmod 11 (4.4.4)?
Thx
Click to expand...
Click to collapse
Yes you can, But only eith data and cache wipe
I'd like to ask few questions:
I have an unlocked bootloader, roooted & debloated razr i NewAOSP ROM 4.1.2 also with custom recovery TWR 2.8.0.0 installed...
Q1: Is it possible to just flash this KIA20.74.rar ROM from this thread via TWR and have KITKAT installed?
Q2: Is it rooted or how to root aftewards?
Q3: Is there any custom KITKAT ROMS available?
Q4: Is it worth to upgrade at all?
Thanks for your reply.
Yossarrian said:
I'd like to ask few questions:
I have an unlocked bootloader, roooted & debloated razr i NewAOSP ROM 4.1.2 also with custom recovery TWR 2.8.0.0 installed...
Q1: Is it possible to just flash this KIA20.74.rar ROM from this thread via TWR and have KITKAT installed?
Q2: Is it rooted or how to root aftewards?
Q3: Is there any custom KITKAT ROMS available?
Q4: Is it worth to upgrade at all?
Thanks for your reply.
Click to expand...
Click to collapse
1. No, it is not possible to flash it. U need to restore it. This is not a flashable zip, it is a TWRP BACKUP that can be restored through the recovery.
2. I dunno if it is rooted, but if it is not. Just install a root zip afterwards through recovery
3. Yep, mine CM11
4. I would say yes. From 4.1.2 to 4.4.x was a great update. A couple of more apps that work and an overal boost of performance. Not that mutch, but noticable.
Hello, guys.
Today I made a full working, flashable TWRP 3.0 recovery for our single SIM device. But do you still need it? Cause I made it for personal use, and if you do - I can post it here. Just need your answer. Thx!
MotexT
Great, please upload it! Does it work with marshmallow? Just flash it in flashtool? And is it hotbootable as well?
Yes please post it!!
Yeah please upload it. I am eagerly waiting for it.
But rather put it into the development section then. And a question... What do you think about building cm for this device?
So, as soon as I finish some test for DualSim version - will post it here. Need also some help with thread creating - it will be first time when I create a new Dev thread on XDA, so I need to respect all stuff like credits, devs, license etc. PM me who can help.
diemadedrei said:
Great, please upload it! Does it work with marshmallow? Just flash it in flashtool? And is it hotbootable as well?
Click to expand...
Click to collapse
Yes, it works perfectly with MM, as it was designed for MM
diemadedrei said:
But rather put it into the development section then. And a question... What do you think about building cm for this device?
Click to expand...
Click to collapse
Will start CM development a bit later, waiting an answer from my Z5 Dev-buddies, who will help. Stay tuned!
Guys from 4pda forum tested my recovery for both, and looks lije both work properly. So will post it here. Who don't want to wait for thread - PM me, will send direct link for download and instructions.
Guide for installing TWRP with link to download
Inside my Drive Folder head to Recovery folder and then download either twrp1 for SingleSim or twrp2 for DualSim
Drive Folder
Guide for installing
Put twrp1.img/twrp2.img to Fastboot folder
Hold Shift and then right click on tge window
Then "Open command line here"
In command line write "fastboot flash recovery twrp1.img/twrp2.img
Connect your phone holding Vol+ button
A blue LED will light up for a while, you will receive "Done or Ok" in command line
After that disconnect your phone abd turn it on
And when yellow LED will appear on Sony logo, press Vol+ one time
Soon you will enter the recovery main menu
twrp1.img for SingleSim and twrp2.img for DualSim respectively
This recovery doesn't have to be reflashed or rehotbooted - this is FOTA one, it will rest untill you reflash FOTA partition
Do I need to be rooted to do this? I have dual sim not locked bootloader and not rooted.
Sent from my E6533 using XDA Free mobile app
angvil said:
Do I need to be rooted to do this? I have dual sim not locked bootloader and not rooted.
Sent from my E6533 using XDA Free mobile app
Click to expand...
Click to collapse
To root your phone flash custom kernel from This thread. Then flash my recovery (still uploading DualSim version, wait 5 min), and through recovery flash latest SuperSu binary and DRM Restore (for recover lost functions after unlocking Bl).
Really really awesome, I'm so happy the device finally gets some love! Should be just as well be flashed via flashtool, right?
Edit: oh and I'm really excited that you're trying to port cm
diemadedrei said:
Really really awesome, I'm so happy the device finally gets some love! Should be just as well be flashed via flashtool, right?
Edit: oh and I'm really excited that you're trying to port cm
Click to expand...
Click to collapse
You can flash a custom kernel from another thread by using Flashtool. But to flash the recovery you need to use Fastboot. Maybe after I will merge kernel with recovery into one flashable unit, but I need some time to figure out how to do that. Stay tuned, cheers!
MotexT
MotexT said:
You can flash a custom kernel from another thread by using Flashtool. But to flash the recovery you need to use Fastboot. Maybe after I will merge kernel with recovery into one flashable unit, but I need some time to figure out how to do that. Stay tuned, cheers!
MotexT
Click to expand...
Click to collapse
I see, will try later then.
diemadedrei said:
I see, will try later then.
Click to expand...
Click to collapse
Give me a sign when you will do that, also report the results. Any additional questions - you're welcome. :highfive:
MotexT
MotexT said:
To root your phone flash custom kernel from This thread. Then flash my recovery (still uploading DualSim version, wait 5 min), and through recovery flash latest SuperSu binary and DRM Restore (for recover lost functions after unlocking Bl).
Click to expand...
Click to collapse
Excuse me, how can do that DRM Restore? I unlocked my BL long time ago without any Backups...
And one more thing, there is any Xposed version for the dual vers E6533?
Thanks a lot.
lilloscar said:
Excuse me, how can do that DRM Restore? I unlocked my BL long time ago without any Backups...
And one more thing, there is any Xposed version for the dual vers E6533?
Thanks a lot.
Click to expand...
Click to collapse
Yep, you can use the latest Xposed Framework (SDK 23). And about DRM Restore - just flash attached file and be happy. Cheers! ?
MotexT
Can I flash the drmrestore onto a fully running system or does it have to be applied before first boot after rom install?
MotexT said:
Yep, you can use the latest Xposed Framework (SDK 23). And about DRM Restore - just flash attached file and be happy. Cheers!
MotexT
Click to expand...
Click to collapse
Am very thankful for all your help and knowledge, my resume is this:
- kernel flashed OK
- TWRP 2 launched OK
- SuperSU flashed OK
- drmrestore flashed OK (at this point I really start appreciate for the first time after months my device)
- Installed Xposed OK
Everything looking so good, I get some time installing lot of things... then I decided to make a Wipe cache / dalvik and unfortunately I get stuck at the boot screen.
Does you recommend anything?
Hi guys,
With the idea to help people unbrick their phones and also to be able to downgrade from MM to LP easier, I have uploaded the latest raw firmware for ZOOA on Mega.
Please, while you will find this useful, don't forget to press my thanks button.
Download link: https://mega.nz/#!MRtTCCzZ!c2qoqIX8drgNRy2KxPV_iiBVKHoW2ppFdwRUsLjIWq4
Note: You need to use "Asus flash tool" to flash it. Mega Mirror Link : https://mega.nz/#!JF91lazI!lQSdQcN5YXIFsaCWtTVHfsvGK1u82NKvy8-X9XIfR0g
Flashing this raw firmware won't relock your bootloader.
Reserved
How to install this??
ayush.gl said:
How to install this??
Click to expand...
Click to collapse
Use the ASUS flash tool
Lock the bootloader? I used the app asus to unlock the bootloader and does not want to block again, no solution?
cl3i550nBR said:
Lock the bootloader? I used the app asus to unlock the bootloader and does not want to block again, no solution?
Click to expand...
Click to collapse
What do you want to do now? Do you want to relock your bootloader?
Flashing this raw firmware won't lock your bootloader.
Does this firmware vers. cause issues with recovery?
Yousvel said:
Hi guys,
Flashing this raw firmware won't relock your bootloader.
Click to expand...
Click to collapse
So I got this OTA update before I finally decided to root/unlock/etc my device. After success with rooting and unlocking the bootloader, I simply can not get any custom recovery to work. Sadly I have seen the problem mentioned several times here on this forum with no answers.
Basically, after a successful installation of a recovery (via android terminal method or pc/fastboot method), I'll boot the phone into fastboot, then select 'recovery.' Screen goes to black, vibrates twice, and reboots to fastboot instead. Only after I boot normally, then reboot into fastboot and try to select recovery again does it boot into a error message (instead of bootlooping), and after 30 secs it loads what I assume is some version of stock recovery.
Can OP ( or anyone else) lend their thoughts?
ztoundas said:
So I got this OTA update before I finally decided to root/unlock/etc my device. After success with rooting and unlocking the bootloader, I simply can not get any custom recovery to work. Sadly I have seen the problem mentioned several times here on this forum with no answers.
Basically, after a successful installation of a recovery (via android terminal method or pc/fastboot method), I'll boot the phone into fastboot, then select 'recovery.' Screen goes to black, vibrates twice, and reboots to fastboot instead. Only after I boot normally, then reboot into fastboot and try to select recovery again does it boot into a error message (instead of bootlooping), and after 30 secs it loads what I assume is some version of stock recovery.
Can OP ( or anyone else) lend their thoughts?
Click to expand...
Click to collapse
This has absolutely zero issue with flashing custom recovery.
Yousvel said:
This has absolutely zero issue with flashing custom recovery.
Click to expand...
Click to collapse
Well there's comfort in knowing that, I suppose.
its not work for me..
it write to me: check the detected serial number failure(not fount the device)
what can i do?
Yousvel said:
Hi guys,
With the idea to help people unbrick their phones and also to be able to downgrade from MM to LP easier, I have uploaded the latest raw firmware for ZOOA on Mega.
Please, while you will find this useful, don't forget to press my thanks button.
Download link: https://mega.nz/#!MRtTCCzZ!c2qoqIX8drgNRy2KxPV_iiBVKHoW2ppFdwRUsLjIWq4
Note: You need to use "Asus flash tool" to flash it. Mega Mirror Link : https://mega.nz/#!JF91lazI!lQSdQcN5YXIFsaCWtTVHfsvGK1u82NKvy8-X9XIfR0g
Flashing this raw firmware won't relock your bootloader.
Click to expand...
Click to collapse
How did you made that? Want to make a raw version of MM 134. Thanks in advance
Inviato dal mio ASUS_Z00AD utilizzando Tapatalk
Brazilian people souldnt update to MM. This update is breaking all sensors in the device.
More: http://www.asus.com/zentalk/thread-98565-1-1.html
Giovix92 said:
How did you made that? Want to make a raw version of MM 134. Thanks in advance
Inviato dal mio ASUS_Z00AD utilizzando Tapatalk
Click to expand...
Click to collapse
Actually I didnt make it. I downloaded it from 4pda.
Yousvel said:
Actually I didnt make it. I downloaded it from 4pda.
Click to expand...
Click to collapse
Okay, can you link me the thread of 4pda? Thanks in advance
Inviato dal mio ASUS_Z00AD utilizzando Tapatalk
Giovix92 said:
Okay, can you link me the thread of 4pda? Thanks in advance
Inviato dal mio ASUS_Z00AD utilizzando Tapatalk
Click to expand...
Click to collapse
People do post 4pda link here, But I don't want to do it myself because xda does not accept 4pda link to be posted here. Sorry my friend.
Yousvel said:
People do post 4pda link here, But I don't want to do it myself because xda does not accept 4pda link to be posted here. Sorry my friend.
Click to expand...
Click to collapse
No worries, via pm?
Inviato dal mio K016 utilizzando Tapatalk
noob question
Yousvel said:
Actually I didnt make it. I downloaded it from 4pda.
Click to expand...
Click to collapse
i was wondering if one can unzip the .zip file and convert it again to .raw format will that be flashable via asus flash tool?
Link does not work
ASUS ZENFONE 2 | Z3560 1.8 Ghz | 2 Gb RAM
@Polis4 http://forum.xda-developers.com/showpost.php?p=68392220
Polis4 said:
Link does not work
ASUS ZENFONE 2 | Z3560 1.8 Ghz | 2 Gb RAM
Click to expand...
Click to collapse
All the links are working fine.
Hi everyone, today I will be telling you all how to get back to stock as long as your bootloader states "PHONE Unlocked" and "FRP Unlock"
You will need to install this, this is super duper important! https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
When installing, you will see the error: "E: Unknown command []]"
DO NOT BE AFRAID!
That is supposed to happen lol.
Installation procedure -
1. Flash this TWRP: https://drive.google.com/file/d/18uHjW73Th8iYKIs5m_QgwleMIOjsZd7S/view?usp=sharing
2. Wipe everything except SD card, then choose "Format data" to decrypt device
3. Reboot once again into TWRP (NOTE: If you are using USB OTG cable, make sure to plug it in AFTER TWRP is fully booted and ready to go, if you do it early, you get an error, which is weird lol. EDIT: Not sure if this error is still present in the new twrp, but it's never bad to play it safe.)
4. Flash HuRUpdater, make sure the file names are correct!
5. Reboot into stock recovery
6. Factory reset and wipe cache partition
7. Reboot
This method also enables themes to work again, so no need to worry about that!
Lots of thanks to @zxz0O0 to providing this awesome tool
And more thanks to the OpenKirin community for helping me out when flashing this! :good::good::good:
hello crayonicle, hehe im on the dot os for now, im interested going back to stock. will i get official updates backs from honor if i go back to stock using this method?
do i need to install the HuRUpdater only as the instruction shows? or follow as the link to the other thread shows?
Alvin Owen said:
hello crayonicle, hehe im on the dot os for now, im interested going back to stock. will i get official updates backs from honor if i go back to stock using this method?
Click to expand...
Click to collapse
(Used to say you can't update ota... but now you can lol)
EDIT: what the...
I flashed it using the method in the original post, of course, and I got an update notification to update system! So yes, updating works!!!! lol
crayonicle said:
Most likely not, the moment you unlock bootloader, you get no updates from that point forward. Just check using this for latest version: http://pro-teammt.ru/huawei-firmware-finder/
Click to expand...
Click to collapse
oh so i do need to follow the instructions in the other thread and download the official firmware for the 7x?
Hi !
Does it work to restore on the BND-L21C432B121 ? Because it's marked for 7X but does it works on all firmware versions of this device ?
Thanks !
hi op,
does this work on L24 the usa version?
What update.zip file did you use? can you point to the link?
Also, does this update take the recovery to stock with no TWRP?
vikra007 said:
hi op,
does this work on L24 the usa version?
What update.zip file did you use? can you point to the link?
Also, does this update take the recovery to stock with no TWRP?
Click to expand...
Click to collapse
Yes, after flashing this via twrp, if you reboot once again to recovery, it is stock recovery, not twrp.
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2649/g1699/v133897/f2/full/update.zip
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2649/g1699/v133897/f2/full/BND-L24_hw_usa/update_full_BND-L24_hw_usa.zip
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2649/g1699/v133897/f2/full/public/update_data_full_public.zip
You need to download all 3 files and rename them.
DaRkLinK_35 said:
Hi !
Does it work to restore on the BND-L21C432B121 ? Because it's marked for 7X but does it works on all firmware versions of this device ?
Thanks !
Click to expand...
Click to collapse
Yes, this works for all Honor 7x variants.
crayonicle said:
Yes, after flashing this via twrp, if you reboot once again to recovery, it is stock recovery, not twrp.
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2649/g1699/v133897/f2/full/update.zip
http://update.hicloud.com:8180/TDS/...BND-L24_hw_usa/update_full_BND-L24_hw_usa.zip
http://update.hicloud.com:8180/TDS/...97/f2/full/public/update_data_full_public.zip
You need to download all 3 files and rename them.
Yes, this works for all Honor 7x variants.
Click to expand...
Click to collapse
What do you need to rename them to? Are the instructions for that in the thread you posted for the tool?
kingd421 said:
What do you need to rename them to? Are the instructions for that in the thread you posted for the tool?
Click to expand...
Click to collapse
Yes, they are in the link for HuRUpdater, read them carefully! :good:
crayonicle said:
Yes, they are in the link for HuRUpdater, read them carefully! :good:
Click to expand...
Click to collapse
I updated using the script. Thank you.
I see the OTA update but it failed to install. Do I need to relock the bootloader?
vikra007 said:
I updated using the script. Thank you.
I see the OTA update but it failed to install. Do I need to relock the bootloader?
Click to expand...
Click to collapse
I would assume so. I sent a support ticket to honor regarding the issue (I had the same problem as you) but I went back to custom ROMs so I can't help you here sorry.
vikra007 said:
I updated using the script. Thank you.
I see the OTA update but it failed to install. Do I need to relock the bootloader?
Click to expand...
Click to collapse
Did you try running the update again? I had a similar problem after I unrooted and reinstalled the stock recovery. It failed the first time but when I rebooted and did it again it worked.
crayonicle said:
I would assume so. I sent a support ticket to honor regarding the issue (I had the same problem as you) but I went back to custom ROMs so I can't help you here sorry.
Click to expand...
Click to collapse
looks like modem update didnt update properly. I am not able to place a call. other apps seem to be fine with data. BTW, what custom rom are you using?
---------- Post added at 11:41 PM ---------- Previous post was at 11:31 PM ----------
vikra007 said:
looks like modem update didnt update properly. I am not able to place a call. other apps seem to be fine with data. BTW, what custom rom are you using?
Click to expand...
Click to collapse
Also, which twrp to use again? Getting Failed: remote: partition length get error) when I try to flash recovery through fast boot
hey
i want to rolll back but im not able to get into twrp after succesfully flashing it.
can u help me pls
BigDiqSeitz said:
hey
i want to rolll back but im not able to get into twrp after succesfully flashing it.
can u help me pls
Click to expand...
Click to collapse
So, use this twrp:
https://transfer.sh/FRHlD/Twrp_p10_lite_0.5_Pretoriano8.img
crayonicle said:
So, use this twrp:
https://transfer.sh/FRHlD/Twrp_p10_lite_0.5_Pretoriano8.img
Click to expand...
Click to collapse
worked fine for me thx ))))
Does this work for bnd-l34 mate se?
madgoogler said:
Does this work for bnd-l34 mate se?
Click to expand...
Click to collapse
It should.
Sent from my BND-L24 using Tapatalk