Hi guys,
I am quite new to the whole world of Android head-units. I've found a unit that fits my car and before I buy it I was just wondering if you guys could help me out a bit.
The unit is: http://www.ebay.co.uk/itm/Android-4...RE-/281909711323?_trksid=p2141725.m3641.l6368
It states that it is a RK3088 unit, although it must be RK3166 if it's quad-core, right?
https://youtu.be/DK4O1XGn0nM?t=3m13s - looking at the description it seems it's a HuiFei type MCU MX.
I note that the XDA repository doesn't include firmware updates for this MCU - does this mean that I won't ever be able to update the firmware? Would the custom ones (Masaryk?) work on this MCU?
I've also read that the microphone is pants, which is why every seller is including some-kind of an external one, in this case a bluetooth one. How does a microphone like that get powered? Is it a difficult to get power to it when installing?
My apologies if this is the wrong forum.
Hello friend,
This is Nicole from Kaigele,which is a 9 years proffesional car dvd player factory.
Thank you for your attention to our Huifei units.But sorry to tell you that,i have checked your attached link,it's not from our factory.
Sorry i can not help you more.
Have a nice day!
Best regards
Nicole
Hey guys. I need some serius help with picking out the correct Android head unit upgrade for my 2000 Suburban. Currently it uses a stock radio, heres a picture:
https://imgshare.io/image/din.srTA8
So, obviously I want to upgrade, been looking around and I'm thinking of buying the Atoto A6Pro. However, my OEM player has two connectors back, show'n in these pictures:
https://imgshare.io/image/srHpe
https://imgshare.io/image/srcuw
I am not sure if one of them is for the Onstar since my car does not have steering wheel controls.
I am in need of help of what harness I need, and what mounting bracket do I need to buy to fit whatever. Not many with Suburbans making guides. I would really appreciate help guys
What I want out of the unit is to play spotify, be able to use radio ofc, and since I want a Android head unit, I would like the option to download stuff from Play Store.
Hi guys im thinking of buying a new android headunit for my Astra GTC and came across this one TEYES TPRO i really like the way this unit UI looks and everything but it doesent have an external microphone port and no Carplay i have spoken to the seller if they planing to upgrade that unit but they dont .
Question is if i buy a diffrent unit can i flash TEYES T PRO firmware into it ? If not can i replace all the apps and launchers to make the UI look same ?TESLA UNIT
I literally spend whole day reaserching the internet and coulndt find much informations about any new launchers or diffrent softwares for these units .
I previously been using a PX5 unit and there was plenty of diffrent softwares etc .
Could anyone please point me in the right direction ? Would really appreciate that thanks in advance .
Hi there. I searched (at least I tried for several hours without luck) this forum and the internet in general.
I have bought a ES8113M from Erisin (https://erisin.de/products/-655) with Android 10 preinstalled and a RN-SS-01 canbus decoder. The issue is that the steering wheel controller is not working. Does anyone have managed to connect the canbus of their Megane to the Android head unit?
Please tell me if you need more info. I am happy for every litte hint on PIN Layouts, factory setting, firmware upgrades or anything else.
Thanks in advance
What did seller suggest when contacted for support?
Is this an FYT based unit?
Thanks @marchnz for your quick reply and thereby help .
Support is poor. I asked two times over two different channels but did not get any answer yet.
Sorry to ask, I am new to Android head units. What do you mean FYT unit? Do you mean the MicroControlerUnit (MCU)-type? Then it's a S32F0 or LEIMA?
It says S32F0_LEIMA-W 20201020-17:05 HD1_7708_D_FF_C8
Oh I see you may ask because I posted to FYT Android head units. If this was wrong sorry and maybe a moderator will provide help and move to the appropriate sub forum (thanks).
@Badger50 thanks for moving this thread to the right forum. I hope someone still reads older (like in days ;-) threads and is able to help and or ask questions for me to better understand and hopefully solve my issue....
neobond said:
@Badger50 thanks for moving this thread to the right forum. I hope someone still reads older (like in days ;-) threads and is able to help and or ask questions for me to better understand and hopefully solve my issue....
Click to expand...
Click to collapse
Is there a possibility to connect the shown connector directly to the radio?
Did you get the right cable tree from the seller? Normally the CAN adapter is connected in between the car-cable tree and the radio.
Is this the right CAN adapter for this radio, provided by the radio seller?
Thank you @rigattoni for your reply. And yes, the Canbus-Decoder ist connected to the Megane on the one side (for power and canbus signal) and the radio (see pinout picture from erisin). I would confirm this as you say it's "normally". I think and hope I have the right harness. At least the QR code says for MEGANE 2 and the website / the seller state it is especially designed and adapted for the Megane 2 (https://erisin.de/products/erisin-e...wifi-4g-dvd-obd-canbus-swc-für-renault-megane).
I did some more digging and analising today. Here are the colors of the ISO-Adapter with the according functions as far as I could find out on the internet (First screenshot). I also compared the cables from the harness and the radio to the canbus adapter (second screenshot). And finally I checked the connections to the radio and the link from there to the canbus adapter again (third screenshot).
It would be nice if someone could confirm some functions and if especially the canbus connections from the harness are the same with your knowledge (at best from another Renault Megane CC2 driver ).
Also I am curious if someone can shre more intel on the canbus cables of a Megane convertible 2.
What if the wiring is fine. I measured 5V between RN-SS-01 PIN3 / PIN4 and GND. To me that makes sense for a canbus information channel... Lots of messages on high...
Can someone provide the correct parameters for the Android head unit? I did a factory reset, an android reset and a SD0 card wipe. Unfortunately the car settings and factory settings remain as I did set them during testing.
For the canbus type (in the factory settings) I think it was 0x00 OFF when I first installed it. I cannot select it from the "select your model" screen (see above, RN-SS-01 missing). But I can set it to 0x85 RENAULT MEGANE SP...
Any intel on what canbus type should work? And how can I test it? In the car settings there is a menu entry steering wheel settings... I did reset it during testing and now even if I press a button on the steering wheel control, nothing happens. I would assume it should pop up a message on which button recognized and ask for what to map it to...
Sorry I am a bloody n00b here....
Sorry for starting this thread, but I would like to finish it with an easy statement: My car hasn't CANBUS (because manufactured >>before 2005<<). So I needed to go with an analogue adapter.
After a very friendly and productive phone call with a German vendor I bought this one here:
https://www.niq.de/lenkradfernbedie...---Scenic---Trafic-Bj--Ab-2000-fuer-auna.html.
From there on very easy to install. Connect the ISO cables from the car to the ISO adapter from NIQ and the departing cables to the ISO connector from the ERISIN head unit. Additionally and to get the steering wheel control working I had to connect SWC1, SWC2 and GND from the NIQ-adapter to the head unit.
Thanks for everyone reading and helping. CASE_SOLVED
Hello, I ordered multimedia for megane 2 ( https://www.aliexpress.com/item/100...020888279!sea!BG!0&curPageLogUid=eazK1RuTtlpe) but the can-bus decoder doesn't work, I ordered another one from another dealer but the coupler is smaller, is it possible to connect the wires to the new one. The new one is labeled "Megane 2" and I got it with cables but they don't fit...
Hello everyone,
This is my first post in the forum and it is also important for me to say that I am not a radio or Android expert by any means, I will try to be as clear as possible, and I will try very hard to understand your answers. If you can be more detailed it might be helpful.
I want to buy a Android head unit and after looking at several brands I think I want to go with ATOTO A6 PF A6G2A7PF, made the decision based on price, seller in USA, advertised features and reviews I found on line. I would really apritiate any help with the following items I have not been able to find for this or any other Android Head Unit:
1) Is there a better unit for around the same price?2) is there a website or something where I can buy the radio harness for my specific car?3) Do I need to buy something to be able to us the Bose factory amp's, the atoto comes with some line to converters not sure if that would work?4) How can I retain Steering wheel controls? I have been told for my car it is too hard as they are "standard resistive button signal" and other said "it was by impedance"5) can I add a usb hub or splitter to connect two things to one USB port on the unit?6) I have read a lot about CanBus integration how do I know if my car can do this?I will install this in a 2001 Nissan Pathfinder LE that still has the stock Bose premium Audio system and I want to keep the amp's and speakers as is for now. suv Las has a second row screen and a VCR in the cargo space that is connected to the Bose unit. any Ideas was can be done with this or upgraded too.
Thank you