How to completely disable off screen navigation key?? - Huawei Mediapad M3 Questions & Answers

I've got an M3 lite 8 and with the off screen navigation key turned off and the standard android on screen navigation buttons turned on, the off screen button, also the fingerprint key, still works. Not fully, it only works to send me to the home screen with a tap.
This is so so annoying I can't even believe it's a thing anyone would ever want. If you're in a game or watching YouTube or any other app you need to hold the tablet in landscape, one little touch and you're bounced out to the homescreen!
Please somebody tell me what I'm doing wrong, there has to be a way to disable this ridiculous function... please???

Related

Could be a numpty questions...power on by pressing screen?

I have recently taken delivery of an Otterbox for use on my bike (GPSComputerCycle and music) but to save power I would like to be able to turn the screen off during the ride (xpshutdown allows me to do this) and then press the screen if I want to turn the HD back on again.
I use S2U2 if this makes an difference.
Is there a setting somewhere which allows me to press the screen to power the THD back on again (even if it goes to a lock-screen)?
I had a quick look through the settings (Screen/Power/Lock) but couldn't find anything.
Anyone help?
Thanks
Not possible AFAIK.
When the screen powers down, that applies to the touch-sensitive mechanism as well as the display element.
It would probably require something deeper than even a registry hack, the drivers would need re-writing or something.
Its not possible for the simple reason that the buttons below the screen are part and parcel of the touch screen, so if the screen is off, they won't work.
There appears to be no power to these lower buttons while in standby, so no software could work either?
However there is other ways of doing this:
1. Use s2u2 unlock on stylus out, so when you pull out the stylus, the HD comes on and unlocks. It's simple.
2. MobileMagic to toggle the screen on/off when device is turned face down. That way when you turn it face down, screen goes off and buttons are locked. To turn it back on, turn devicedevice face down again. You will need need to go to Start-Settings-System-Power-Advanced and untick the option, "Turn off device if not used for", because if the device gets turned off (instead of just screen off) it won't respond.
Hope this helps
Unfortunately the HD will be inside an Otterbox mounted on the handlebars of my bike, so removing the stylus would not be an option and neither would using the G-Sensor.
Sounds like I will have to have it powered on all the time. I know that GPSCycleComputer dims the display while it is active, so this might be a part solution.
Thanks for all the answers though. I was being a numpty after all!
Regards
GLOC said:
Unfortunately the HD will be inside an Otterbox mounted on the handlebars of my bike, so removing the stylus would not be an option and neither would using the G-Sensor.
Sounds like I will have to have it powered on all the time. I know that GPSCycleComputer dims the display while it is active, so this might be a part solution.
Thanks for all the answers though. I was being a numpty after all!
Regards
Click to expand...
Click to collapse
Alternative solution:
Attach a dynamo to the wheels of your bicycle and charge your HD on the go
I wouldn't be able to even begin telling you how to do this though!

issus on the unlock screen

feel lag on when is unlocking. did any one having a same problem with me??
please delete this post...
The unlock swipe would lag for the following reasons:
1. Your wifi was turned on but is off because of screen being off. You turned on the screen which makes the phone re-enable wifi and connect to a network. This process will lag the swipe animation.
2. You used some kind of app (ie. JuiceDefender) that would disable APN (3G) when your screen is off. Turning the screen on again will make the phone to try to reconnect to 3G and this will also lag the swipe animation.
3. You just turned on your phone and because things are still loading at startup, doing the swipe will lag.
Tip: Try to wait for 5 seconds after turning the screen on and then do the swipe motion. It should go back to normal.
If none of that applies to you, do a factory reset =)
this is my second time to hard reset it but still the same.
I often find that swiping doesn't unlock the phone; the arrow won't go all the way to the edge of the screen (it sometimes just stops halfway). When that happens, I press the power button to lock the screen, then try the process again. 9 times out of 10 it'll work fine the second time.
This happens when the WiFi is off, and I am not using any APN software, nor have I just switched the phone on.
It doesn't really bother me, unless this happens when a call comes in, and I can't answer it! (it often takes me a few swipes to answer a call, and I have to swipe it slowly and carefully)
shanespencer said:
I often find that swiping doesn't unlock the phone; the arrow won't go all the way to the edge of the screen (it sometimes just stops halfway). When that happens, I press the power button to lock the screen, then try the process again. 9 times out of 10 it'll work fine the second time.
This happens when the WiFi is off, and I am not using any APN software, nor have I just switched the phone on.
It doesn't really bother me, unless this happens when a call comes in, and I can't answer it! (it often takes me a few swipes to answer a call, and I have to swipe it slowly and carefully)
Click to expand...
Click to collapse
you might have a problem with your screen where some parts wont respond to your touch
download any drawing programs " i find magic marker " is the best from the market place. its free. and tap dots all over your screen, if there is/ are parts that doesnt response to your tap from the first time, that means u have problem with the screen and its not accepting your touch input. which is why your swipe doesnt go all the way sometimes.
Yes there is lag on the unlock screen. I see it as just bad programming by SE.
-------------------------------------
Sent via the XDA Tapatalk App
My swype keep changing direction, anyone nows how to set it to a particular side?
@mirdones - it changes sides when you start with your finger at the top of the swipe arc and slide your phone across the screen (left to right or right to left)..
@everyone - my swipe unlock occasionally stops about 3 quarters of the way along.. all I do is re-swipe from where it stopped and it's fine - that said, it doesn't happen as much now that I have stopped using task killers and startup auditor.
I find that instead of a slow swipe more of a flick works well for me.
Does anyone know if its possible to disable the se lock and just use the android one?
gavriel18 said:
Does anyone know if its possible to disable the se lock and just use the android one?
Click to expand...
Click to collapse
...would love to know this too

On screen keyboard mode switcher button problems

This is probably going to not get any responses as most people aren't using the on screen keyboard, but I'll post it anyways.
Has anyone's on screen keyboard had the mode switching button break? This is the button in the bottom right that lets you switch between full keyboard, thumb keyboard, and transcriber. When it stops working, the icon disappears. If you click it, the key turns white and stays white and does nothing.
I don't know what causes it to break, but once it's broken, I can't get it to work again. It seems to be user-account specific. It works fine on other user accounts I create, but once it breaks on one account it stays broken.
this happens to me too, ms forums only ever says refresh your pc, that work for less than a day, hopefully it is fixed by beta

[Q] touch screen sensitivity

Is sensitivity adjustable? My phone is constantly calling people on my contact list, or texting them paragraphs of jibberish. And jumps around from screen to screen "on it's own".
When I take it out of the case,it's awake, and it's on any one of who knows what page. And my apps are moved around, like I held my finger on one of the apps on my home page and dragged it to another page (panel)
When I turn the phone on, or take it out of the case, almost always the big weather and time app is gone from my home page. I have to find it, and drag it back home.
Before I put my phone in my belt case, . . . because I'm having this problem . . .
1). I turn off all apps. (Hold the select button down a few seconds. Then swipe off all open apps.)
2). I make sure it's on the main desktop page, and put it to sleep. (Press OFF button for a second. Screen is black) So the page that should come up when I wake it up should be my home page. And if it's accidentally bumped or presses the awake button while in my case, (?) it should be on home page, not on message page, or phone page. Or trying to log me into Google!
But it's getting turned on, and apps selected, etc. while it's in the case. Sometimes it's actually turning off, then back on. I hear it chiming during the bootup.
The case was made for the phone. Fits perfectly. Leather. And there's no way I'm bumping the side of the case, hitting the on button.
When it does this, sometimes it's on my messaging/texting page, and somehow selects someone to text. And is either recording whatever it's "hearing", or it types long paragraphs of jiberish text.
Any ideas? TIA! Wayne
does it do it on it's own?
When left overnight untouched, or left on table for awhile?
As far as I know the only way to physically wake the phone up is either press side power button or center home button and maybe the case is causing the phone to wake and register commands. Another possibility is voice commands, are those on?
otherwise there is a program that causes all the trouble. Once you know whats causing the issue, the fix should be simple.
I think screen sensitivity can only be adjusted up, for glove use, but that makes me think you suspect case being at the root of this, so either try different case, or lock the screen with password or something more difficult to activate by accident.
My friend "butt call me" at least 3 times from his iphone, but I never had this issue with Note3 since I have to press one of the buttons and then properly swipe the screen, within few seconds, not easy to do accidently .
And judging from your post, do you have your screen lock set to nothing ? So it's easy to wake the phone and do unintended touches, even in a case.
Sent from my N9005
Thanks
RE: And judging from your post, do you have your screen lock set to nothing ?
So it's easy to wake the phone and do unintended touches, even in a case.
Thanks for the reply. As far as I know I don't have my screen locked to anything.
No idea actually.
What I did find is that the sensitivity feature was turned on. I turned that off.
Then I turned off the voice function.
Tried that. No better.
So I set a password. That works. BUT . . . now I can't find where I turned off the voice rec.
And I've really tried finding it. Now I can't use voice for texting. The mic icon is gone from
my text menu.

[Q] Wake by button only

I have the LG G Watch R... What I have going on is i constantly turn my watch on by accident. Either i cross my arms or my leg touches the screen and turns it on.. I've even played a game without knowing i was. I've tried the hacks/ advanced settings app but those only 1/2 way turn it off. (you can still swipe).
Is there anyway to completely disable the touch screen and only be able to wake it up with the physical button??
Try double click button to put watch in theatre mode. Otherwise use settings or pull down menu.
I want the screen on i just want the touch screen to be completely disabled..
I want it to still show time but have no response to touch until after the button is clicked.
Did you check market for any third party app?

Categories

Resources