Database Users

Urgent - G7-L11 Lollipop custom recovery

I've G7-L11 Running Lollipop 5.1.1 - And its root is hell to me.
No recovery img in google works.. cuz latest twrp 2.8.7 and CWM are made for L01 and L00 NOT L11, thus my firmware kernal rejects the recovery and i got this message when trying to flash or directly boot the recovery img (Failed adb not found)
all fastboot boot twrp.img or fastboot flash recovery twrp.img or any command concerned or related to that issue doesnt work at all.
so please could any one find or build custom recovery for that model G7-L11 Lollipop?
Can any one who has G7-L11 or who is expert help me to get a working recovery?

am sorry brother you had to go through this, i went thru this, but i think i might have found a fix,. there is no custom recovery that works with huawei G7-L11 lollipop, what you need to do is first download the firmware for your phone, the lollipop firmware in order to extract the recovery file, that "UPADATE.APP" file, then download huawei firmaware extractor from
here "http://fs1.d-h.st/download/00173/wwfQ/HuaweiUpdateExtractor_0.9.9.3.zip"
then extract the files, (if you get stack on how to use it, there are videos on youtube to use it), (Extract Zip with any exctractor then, extract UPDATE.APP with huawei file extractor
Then u need a ADB files, i found using CMD directly very confusing, so download this "https://mega.nz/#!eVx3DKyC!9iI9QwvqTXJtqmfGEExC3S2XMfxWewNezQZWy_7gUz0" its a philwood touch file but it has the necessary files we need, what we are trying to do here is to restore the phone original recovery and flash the update from the exSD Card,.
After you have download the Philwood Touch file(this is a normal zip file) extract the files and inside you will find the recovery img file, just replace this with the one you extracted from UPDATE.APP. so that the philzwood folder will have the original recovery which comes with the update and the one that is usually found in the phone,
Then put your phone in the Fastboot and recovery by holding volume down and power button together, then from the Philzwood recovery first run"adb-windows" then "Fastboot windows" then "Install windows, after you have done this you will have your recovery(Orignal Recovery),
Turn off your phone, Then take the UPDATE.APP transfer the file to ExSD Card(External Memory Card) put it in a phone ( Copy the whole dload file), Now hold both Volume up and down and power button until your phone boot up dnt let go until you see a phone installing from SDCARD Just sit back relax after its done your phone will as good as new, i hope u get this right,.
If the download link for Philzwood doesnt work https://www.youtube.com/watch?v=AHe68zH4jgA there are link down at the description
Or search this in google "PHILZ-TOUCH-6.59-G7-buid-21-02-2015"

Deal All
I have G7 -L11 of Huawei ascend, it's front class broken but working. Can anyone help me to find out the same. In Delhi service center it is not available.

phone bricked? Need help!

Hi guys massive android noobie here!
I really hope you guys can help me cause I am desperate!
This is what happened: I tried to manually update my phone B200 to B313. I had no luck with the update.zip so I tried the update.app (superstupid). As you guys might know, this resulted in a bootloop.
I downloaded Huawei firmware extractor and adb. I have two problems on top of a not working phone:
1: when i try to extract my firmware i just get a system.img, no boot.img or the other one you need
2: i managed to unlock my bootloader, but whenever i use adb devices it stays empty, fastboot reboot works though... weird
How do I get my lovely device working again?
Kind regards,
Jurgen

Flash B200 again with 3 button method, should work
Extract zip files and copy update.app on SD card, in dload folder

lejur said:
Hi guys massive android noobie here!
I really hope you guys can help me cause I am desperate!
This is what happened: I tried to manually update my phone B200 to B313. I had no luck with the update.zip so I tried the update.app (superstupid). As you guys might know, this resulted in a bootloop.
I downloaded Huawei firmware extractor and adb. I have two problems on top of a not working phone:
1: when i try to extract my firmware i just get a system.img, no boot.img or the other one you need
2: i managed to unlock my bootloader, but whenever i use adb devices it stays empty, fastboot reboot works though... weird
How do I get my lovely device working again?
Kind regards,
Jurgen
Click to expand...
Click to collapse
I tried to do something similar, although I screwed it up even further. Prior to attempting this entire process, I was using GRA-L09 build B171. After attempting to install B317 from B171, I got stuck in a bootloop between the Huawei logo and TWRP. I realized that my mistake was probably because I had TWRP instead of the stock ROM. Therefore, I downloaded the B170 full firmware and extracted the B170 files. I tried to use fastboot to flash boot.img system.img and recovery.img according to bihsik's guide, but fastboot could never recognize my device. So I decided to be "smart" and transfer Boot.img and recovery.img from the B170 firmware to my dload folder on my external sd card on the phone and install them directly from TWRP.
This screwed everything up, and now I'm stuck in Rescue Mode with "Error! Func NO : 11 (recovery image) Error NO : 2 (load failed!)"
I've searched google and XDA forums and have tried the methods here and here but without any luck.
Is there a way to fix my phone?

You can Easily Fix your Device , Just follow the Steps Carefully
Follow this link to fix your Mobile:
This Tutorial is easy to follow. Fix your device and Return to your OFFICIAL STOCK ROM
https://youtu.be/4AkSuE20_08
Links are included in video Description .
Cheers...!
I bricked my mobile few months ago and I fixed my mobile using this video , hope it will help you guys too.
---------- Post added at 12:28 PM ---------- Previous post was at 12:25 PM ----------
vudawatta said:
I tried to do something similar, although I screwed it up even further. Prior to attempting this entire process, I was using GRA-L09 build B171. After attempting to install B317 from B171, I got stuck in a bootloop between the Huawei logo and TWRP. I realized that my mistake was probably because I had TWRP instead of the stock ROM. Therefore, I downloaded the B170 full firmware and extracted the B170 files. I tried to use fastboot to flash boot.img system.img and recovery.img according to bihsik's guide, but fastboot could never recognize my device. So I decided to be "smart" and transfer Boot.img and recovery.img from the B170 firmware to my dload folder on my external sd card on the phone and install them directly from TWRP.
This screwed everything up, and now I'm stuck in Rescue Mode with "Error! Func NO : 11 (recovery image) Error NO : 2 (load failed!)"
I've searched google and XDA forums and have tried the methods here and here but without any luck.
Is there a way to fix my phone?
Click to expand...
Click to collapse
Just be Care full in choosing the Firmware , if your firmware doesn't match , then the 3 Button method will stop at 5%.

Can't mount /data on Huawei Mediapad M3 (BTV-DL09) and other problems

Hello community,
This is my first post on this forum. My English is not perfect, so sorry for misspellings.
I bought my Mediapad M3 for 6 weeks with BTV-DL09C100B006 ROM.
I unlocked the bootloader, because I needed root for a Android firewall.
The Problem is, after unlocking the tablet (and flashing TWRP), I could not install any Update via Huawei Update App. After installing a stock recovery (extracted from BTV-DL09C100B009), i try it again, but "Update failed".
So I forced with a code *#*#2846579#*#* and fail again.
-
So I searched for original stock rom package from Huawei, but there was nothing. But now, Huawei published the new Nougat Update. So I downloaded the update (FULL-OTA, BTV-DL09C100B302), unzip and then put the UPDATE.app to the dload folder.
After that, installation was successful, but WLAN or (screen-)keyboard didn't work and the stock updater as well. After Wipe /system /cache /data, today I wanted to flash back to Android 6, because 7 don't works.
On this website (hxxp:// consumer.huawei. com/de/support/tablets/mediapad_m3_8_de-sup.htm) I found the "HUAWEI MEDIAPAD M3 8 FIRMWARE (BTV-DL09 ,C100B009, EMUI4.1+ANDROID 6.0)" and tried to install it (extracted image files with huaweiupdateextractor). But it will not work.
My situation now:
- Tablet has no OS, so I can only use TWRP
- I have a full backup from old working os (made with twrp) but I can't recover system backup, because twrp stops at ~73%...
My last steps via fastboot:
Code:
fastboot flash boot boot.img
=>OKAY
Code:
fastboot flash recovery recovery.img
=>OKAY
Code:
fastboot flash recovery2 recovery2.img
=>OKAY
Code:
fastboot flash cust cust.img
=>FAILED (remote:partition error)
Code:
fastboot flash userdata userdata.img
=>bootloader> success to erase cryypt info in oeminfo
=>OKAY
Code:
fastboot flash system system.img
=>FAILED (remote: sparse flash write failure)
I dont't know what to do. I can't format /data partition or mount now (happens after flashing userdata.img). The checkbox don't want to be checked. I connected my tablet with twrp (MTP) and Windows shows only external SDCard!?! :crying:
Please help me! I haven't such problems with all my rooted smartphones..
Edit: Tried to restore tablet with eRecovery, but I got already the message "Getting package info failed".. The HiSuite isn't helpful too.
Hazelnut85

Extract HUAWEI MediaPad M3 8 Firmware (BTV-DL09 ,C100B009, EMUI4.1+Android 6.0).rar inside there are manual .read it.
or you are in hurry.
place dload-folder in external_SD card (extract from above file)
forced update (3 button)
(Hold "Volume up" + " volume down "+" Power " at the same time and hold them until the label appears.)
Now your M3 was relocked bootloader again and install stock firmware B009 . Make sure for fully working. just factory reset from settings menu.

tom.android said:
Extract HUAWEI MediaPad M3 8 Firmware (BTV-DL09 ,C100B009, EMUI4.1+Android 6.0).rar inside there are manual .read it.
or you are in hurry.
place dload-folder in external_SD card (extract from above file)
forced update (3 button)
(Hold "Volume up" + " volume down "+" Power " at the same time and hold them until the label appears.)
Now your M3 was relocked bootloader again and install stock firmware B009 . Make sure for fully working. just factory reset from settings menu.
Click to expand...
Click to collapse
Thank you! It works now. I can't believe it! :crying:
Nothing worked for me and haden't read anywhere about the "3 button press"-thing.
Hmm maybe this Thread can useful for other people, who tried to restore to stock.
Thank you again

Hazelnut85 said:
Thank you! It works now. I can't believe it! :crying:
Nothing worked for me and haden't read anywhere about the "3 button press"-thing.
Hmm maybe this Thread can useful for other people, who tried to restore to stock.
Thank you again
Click to expand...
Click to collapse
Happy to see you smile. EMUI 5 use f2sf format /data but EMUI 4.1 use ext4. and if you want to root EMUI 4.1 by useing Magisk pleased beware not to use magisk hide cause it will hide your fingerprint menu also. haha

[Question] Huawei P10 Lite stuck in "Huawei eRecovery" screen

Hello,
My Huawei P10 Lite is bricked (or not ...), but I can not boot the system.
After restoring a backup through TRWP, I always get the "Huawei eRecovery" screen and I can not start the android system. This screen should allow download a recovery but the connection always fails.
I am able to load *.img files throuth the fastboot, and with that I am able to load the TWRP recovery (if needed).
At this point the bootloader is locked, but I also have the unlock code. So it's not a problem.
After some research on the internet it seems that it is necessary to reinstall the stock recovery ... Is it the only way to recover the smartphone?
Does anyone have a stock recovery image?
Ideas?
My model is a WAS-LX1A (Portugal).
Thanks

Same here. same country, same model. Have you solved it?

Did you find by chance the recovery?

goetzchrist said:
Did you find by chance the recovery?
Click to expand...
Click to collapse
Hi, i recovered the phone flashing the recovery stock binary in RECOVERY and RECOVERY2.

merdecas said:
Hi, i recovered the phone flashing the recovery stock binary in RECOVERY and RECOVERY2.
Click to expand...
Click to collapse
can you guide us how?

Hi,
Enter in fastboot and execute the following commands:
fastboot flash recovery recovery.img
fastboot flash recovery2 recovery2.img
fastboot reboot
You can find the stock recovery in this link:
https://mega.nz/#!0NsEVRIb!DKSqqW5H4DQX7pcyACH4cFbKQS9K8Ov1BNnLfk4sSUs

Fixing Bricked P10 Lite without TWRP , This works even if your Boot is locked
Don't worry my friend be chill, I too bricked my huawei P10 Lite Middle East Version and after a month of struggle I was finally able to fix this issue and restored my STOCK .
This video is made to help you successfully fix your Bricked Huawei P10 Lite
Follow the below youtube video link clearly to unbrick your Huawei
If the above video doesn't play then click on thsi link below
https://youtu.be/0vDgDXePAR4
Cheers.....

help please
merdecas said:
Hello,
My Huawei P10 Lite is bricked (or not ...), but I can not boot the system.
After restoring a backup through TRWP, I always get the "Huawei eRecovery" screen and I can not start the android system. This screen should allow download a recovery but the connection always fails.
I am able to load *.img files throuth the fastboot, and with that I am able to load the TWRP recovery (if needed).
At this point the bootloader is locked, but I also have the unlock code. So it's not a problem.
After some research on the internet it seems that it is necessary to reinstall the stock recovery ... Is it the only way to recover the smartphone?
Does anyone have a stock recovery image?
Ideas?
My model is a WAS-LX1A (Portugal).
Thanks
Click to expand...
Click to collapse
same here , i relocked the bootloader and the mobile got stuck on the recovery mode .
please help , when i open the adb cmd with the mobile in recovery state , the adb can't see my device ,how did you load *.img files through the fastboot, guide me please

P8 lite (ALE-L21) Stuck on rescue mode. Please help

Hey guys,
I turned on my phone after years and I saw it's stuck on rescue mode with errors number 1 (security verify failed) & 10 (boot image).
I was able to go to eRecovery and Fastboot only.
Wiping data and factory reset through eRecovery didn't fix the problem and also I couldn't flash the whole rom using dload mode.
Then I checked fastboot and found out the bootloader was locked. After doing my research, I unlocked the bootloader using PotatoNV and testpoint. Then I could only flash some images like boot, system, recovery & cust. Not other images. Problem remains. Then I used testpoint mode and I was able to flash most of the images like HIFI etc, but nothing changes yet
I also tried Huawei smartphone multi-download and IDTML but they fails too. tried to use SP Flash Tools but couldn't find compatible rom with it.
Its firmware is C185B572. I can flash this version images using fastboot only. Others go to prim vrl failure.
Also flashed TWRP for using that but can't go to it at all.
I don't know what to do anymore
Any help would be appreciated.

Decterox said:
I also tried Huawei smartphone multi-download and IDTML but they fails too. tried to use SP Flash Tools but couldn't find compatible rom with it.
Click to expand...
Click to collapse
Hello!
I’m having the same issue (I haven’t unlock the bootloader though) as you and sadly don’t have any solution yet.
However, what’s this "Huawei samrtphone multi-download" and "IDTML"?
I do have some (hopefully!) compatible ROM that I’m willing to try with SP Flash Tool.