Database Users

(SOLVED)Debrand c636 to c432

If someone tried to debrand L09C636 to L09C432?

Back up your data
- Unlock your bootloader
- Flash TWRP
- Root
- Use SRK Tool to change your Oem and cust files to the same version of the rom you want to install
- install your rom same version than oem and cust with TWRP
- Let boot completly
- Factory reset
- Then relock your bootloader with fastboot
It will factory reset again and you'll have a full official working device.
It should work just great. There are some tutorials on the forum just look at it.
Try the step by step guide in this link : https://forum.xda-developers.com/mate-8/general/how-to-install-nxt-l09c432b560-official-t3542546
I did it to get my L29C636B321 to L29C432B560 and it's fully working.

didshub said:
Back up your data
- Unlock your bootloader
- Flash TWRP
- Root
- Use SRK Tool to change your Oem and cust files to the same version of the rom you want to install
- install your rom same version than oem and cust with TWRP
- Let boot completly
- Factory reset
- Then relock your bootloader with fastboot
It will factory reset again and you'll have a full official working device.
It should work just great. There are some tutorials on the forum just look at it.
Try the step by step guide in this link : https://forum.xda-developers.com/mate-8/general/how-to-install-nxt-l09c432b560-official-t3542546
I did it to get my L29C636B321 to L29C432B560 and it's fully working.
Click to expand...
Click to collapse
I also debranded my L29C636B320 and running L29C432B560 now.. however data keeps cutting out and cant download mms messages.. I did not use twrp to install cust and oem as you stated.. is that the problem and how do you install cust and oem in twrp?

bailey2408 said:
I also debranded my L29C636B320 and running L29C432B560 now.. however data keeps cutting out and cant download mms messages.. I did not use twrp to install cust and oem as you stated.. is that the problem and how do you install cust and oem in twrp?
Click to expand...
Click to collapse
Watch tihs video instruction https://www.youtube.com/watch?v=JZVsIKtdgV4

bailey2408 said:
I also debranded my L29C636B320 and running L29C432B560 now.. however data keeps cutting out and cant download mms messages.. I did not use twrp to install cust and oem as you stated.. is that the problem and how do you install cust and oem in twrp?
Click to expand...
Click to collapse
In fact i used SRKtools to backup my oem and cust, then i change my oem and cust with SRKtools from c636 to c432.
Then i just followed the step by step guide of this thread : https://forum.xda-developers.com/mate-8/general/how-to-install-nxt-l29c432b560-official-t3540042

didshub said:
In fact i used SRKtools to backup my oem and cust, then i change my oem and cust with SRKtools from c636 to c432.
Then i just followed the step by step guide of this thread : https://forum.xda-developers.com/mate-8/general/how-to-install-nxt-l29c432b560-official-t3540042
Click to expand...
Click to collapse
yeah thats exactly what I did too.. most everything works.. except occasional data disconnect and cant get mms to download.. was wondering if you took extra step of restoring oem and cust from c636 after flashing 432b560? can you get mms?

bailey2408 said:
yeah thats exactly what I did too.. most everything works.. except occasional data disconnect and cant get mms to download.. was wondering if you took extra step of restoring oem and cust from c636 after flashing 432b560? can you get mms?
Click to expand...
Click to collapse
i was on NXT-L29C636B321 and i never rooted or flashed something else on my mate. (i only upgraded with dload method a few months ago)
For what i remember i did like that:
-Unlocked bootloader with dc unlocker and SRKtools.
-installed twrp with SRKTOOLS
- rooted with SRKtools or flashing with twrp i can't remember.
- backup oem and cust and then change it from c636 to C432 with srktools.
- factory reset
- relocked bootloader
then i've done the step by step guide of the B560 official from the beginning.
Everything works great. dual sim, mms etc...

didshub said:
i was on NXT-L29C636B321 and i never rooted or flashed something else on my mate. (i only upgraded with dload method a few months ago)
For what i remember i did like that:
-Unlocked bootloader with dc unlocker and SRKtools.
-installed twrp with SRKTOOLS
- rooted with SRKtools or flashing with twrp i can't remember.
- backup oem and cust and then change it from c636 to C432 with srktools.
- factory reset
- relocked bootloader
then i've done the step by step guide of the B560 official from the beginning.
Everything works great. dual sim, mms etc...
Click to expand...
Click to collapse
Well I did the rollback.. still rebranded as l29c432 running b192 and of course all working including mms.. shall investigate further

anybody attempted debranding while on EMUI 5.0?
My AL10C00 is running B577 and is well except the little annoying chinese characters here and there. I'd love to debrand it to L29C423 (EU) once and for all.
My bootloader is unlocked. Please advice.

wmfreak said:
anybody attempted debranding while on EMUI 5.0?
My L10C00 is running B577 and is well except the little annoying chinese characters here and there. I'd love to debrand it to L29C423 (EU) once and for all.
My bootloader is unlocked. Please advice.
Click to expand...
Click to collapse
Anybody?

[email protected] said:
If someone tried to debrand L09C636 to L09C432?
Click to expand...
Click to collapse
I need this oeminfo file for L09C432. Are there any share or download links ？Thanks.

Huawei p9 lite

Hi Guys
I have huawei p9 lite and I need firmware VNS-L31C900B150
I can't find it in the internet
Please help I need it to reflash my phone ..

Use Huawei firmware finder or just use the c432 version, I recommend it

Potato997 said:
Use Huawei firmware finder or just use the c432 version, I recommend it
Click to expand...
Click to collapse
I already tryed C432 and it doesn't work
And my phone is off because it doesn't have any OS so I can't use huawei firmware finder
Is there any idea or solution for this problem..!

Huawei firmware finder is also a program for Windows, Google it

Potato997 said:
Huawei firmware finder is also a program for Windows, Google it
Click to expand...
Click to collapse
Yeah now I found it and tried it but it's doesn't work
I can't found my device firmware ..
Please any more idea

Can you access to fastboot and TWRP?

Potato997 said:
Can you access to fastboot and TWRP?
Click to expand...
Click to collapse
do u know how to flash Cust, Vendor, Product etc. for p9 lite???
or can you give me link to download them and flash?

Potato997 said:
Can you access to fastboot and TWRP?
Click to expand...
Click to collapse
yes I can access to fastboot only
can't access to TWRP

Try to flash Meticulus's TWRP, if it does not work try Revolution recovery

Potato997 said:
Try to flash Meticulus's TWRP, if it does not work try Revolution recovery
Click to expand...
Click to collapse
Already I tried to flash TWRP and it flashed good but when I try to get TWRP mode my device doesn't work
here is my full problem https://forum.xda-developers.com/huawei-p9lite/help/huawei-p9-lite-flashed-formating-t3576669

Potato997 said:
Try to flash Meticulus's TWRP, if it does not work try Revolution recovery
Click to expand...
Click to collapse
Now I get revolution recovery and I can access to it
I want to install lineageOS 14.1 like here https://www.youtube.com/watch?v=hNhv-fKJFaw
but after I finish my phone doesn't work
I think that's because revolution recovery " I cant install TWRP recovery but my phone doesn't work on TWRP I don't know why "
can you help me with this please..

To install LineageOS you have first to downgrade to stock 6.0
You can find countless thread about how-to, after you downgrade to MM you can install LineageOS following the video that you found

Potato997 said:
To install LineageOS you have first to downgrade to stock 6.0
You can find countless thread about how-to, after you downgrade to MM you can install LineageOS following the video that you found
Click to expand...
Click to collapse
I'm not sure if I understand to you
I don't have any os on my phone now
and I tried to install lineageos like video above and everything done but phone doesn't work..

Follow these steps:
1. Unbrick your phone installing stock EMUI 4.1.1 Android 6
2. Unlock bootloader
3. Flash Meticulus's TWRP
4. Install LineageOS following the video
The reason why you have first to install EMUI 4 is because it's the only way to install LineageOS. To restore your device, you can find a lot of thread on our P9 lite subforum, search in Q&A and Guides and you will find a lot of tutorial to unbrick and restore the phone to stock Android 6.

Potato997 said:
Follow these steps:
1. Unbrick your phone installing stock EMUI 4.1.1 Android 6
2. Unlock bootloader
3. Flash Meticulus's TWRP
4. Install LineageOS following the video
The reason why you have first to install EMUI 4 is because it's the only way to install LineageOS. To restore your device, you can find a lot of thread on our P9 lite subforum, search in Q&A and Guides and you will find a lot of tutorial to unbrick and restore the phone to stock Android 6.
Click to expand...
Click to collapse
Thank you because you're here with me..
I tried every firmware to flash it on my device and no one help me
I can't find my device firmware " VNS-L31C900B150 " even with huawei firmware finder
each time I get new problem or just phone tel me incorrect version please download correct version ..
I don't know what I will do to use my phone :crying:
Do you have any idea to re-life my phone..

Did you searched in the forum the guides..? To unbrick the phone you have to boot to TWRP, either Meticulus's or Revolution one, flash the oeminfo of your device, the dload the c432 firmware

Potato997 said:
Did you searched in the forum the guides..? To unbrick the phone you have to boot to TWRP, either Meticulus's or Revolution one, flash the oeminfo of your device, the dload the c432 firmware
Click to expand...
Click to collapse
yeah I tried c432 and device get error " incorrect version please download correct version "
and what you mean in "oeminfo" I can't find results after search for it and my device name on this forum..!

Download this
https://drive.google.com/open?id=0B3sZyHMlYDO0S1c2Y1lNMlJaVXM
Flash it in TWRP
Retry dload c432

Potato997 said:
Download this
https://drive.google.com/open?id=0B3sZyHMlYDO0S1c2Y1lNMlJaVXM
Flash it in TWRP
Retry dload c432
Click to expand...
Click to collapse
Now I really have bad luck :crying::crying::crying:
I flashed the file you give me
and after that reboot phone to try re-dload C432 and I get same problem " incorrect version "
after that I reboot my phone ti back to recovery mode and I get bootloader lucked
And I don't have bootloader code to re-unlock it
What I can do .. " my phone doesn't work "

baselmd47 said:
Now I really have bad luck :crying::crying::crying:
I flashed the file you give me
and after that reboot phone to try re-dload C432 and I get same problem " incorrect version "
after that I reboot my phone ti back to recovery mode and I get bootloader lucked
And I don't have bootloader code to re-unlock it
What I can do .. " my phone doesn't work "
Click to expand...
Click to collapse
Man, you flash wrong oeminfo...
That oeminfo is maybe for VNS-L21...
Regarding bootloader unlock code if you can provide IMEI/SN from phonebox i can generate a unlock code for you.

Rollback NXT-AL10 TO EMUI 6 ?

HI
can anyone help me to rollback my nxt-al10 to emui 6 please

drlsd said:
HI
can anyone help me to rollback my nxt-al10 to emui 6 please
Click to expand...
Click to collapse
Emui 6 ?? or maybe you want to say emui 4 and android 6 ??

Yes ,thank you very much ,i mean emiu 4.1 please

drlsd said:
Yes ,thank you very much ,i mean emiu 4.1 please
Click to expand...
Click to collapse
unlock & flash TWRP recovery & flash another firmware using TWRP
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146

I would like too to rollback my nxt-al10 from emui 5.0 (android 7.0) to emui 4.0 or 4.1.
Now my rom is nrd90m test-keys (AL10).
I read last post and I don't know how to unlock & flash TWRP recovery - before emui 5.0 I use SRKToolHuawei but now SRKTool don't support emui 5.0
Guys pleas help me.

bodzio3333 said:
I would like too to rollback my nxt-al10 from emui 5.0 (android 7.0) to emui 4.0 or 4.1.
Now my rom is nrd90m test-keys (AL10).
I read last post and I don't know how to unlock & flash TWRP recovery - before emui 5.0 I use SRKToolHuawei but now SRKTool don't support emui 5.0
Guys pleas help me.
Click to expand...
Click to collapse
If you're​ on nrd90m test key ,you can simply dload your last EMUI4 or 4.1 rom
Sent from my Huawei Mate 8 using Tapatalk

amin318 said:
If you're​ on nrd90m test key ,you can simply dload your last EMUI4 or 4.1 rom
Sent from my Huawei Mate 8 using Tapatalk
Click to expand...
Click to collapse
I tried with dload method rom NXT-AL10C00B386 and while after boot in update I see that:
Software install failed!
Incomatibility with current version.
Please download the correct update package.
Please help

​
bodzio3333 said:
I tried with dload method rom NXT-AL10C00B386 and while after boot in update I see that:
Software install failed!
Incomatibility with current version.
Please download the correct update package.
Please help
Click to expand...
Click to collapse
Did you change your phone's cust version? If u changed it you should dload a firmware (4/4.1) that match with your new cust
I rolled back with this method dozen times when EMUI 5 was not officiall!
Sent from my Huawei Mate 8 using Tapatalk

amin318 said:
​
Did you change your phone's cust version? If u changed it you should dload a firmware (4/4.1) that match with your new cust
I rolled back with this method dozen times when EMUI 5 was not officiall!
Sent from my Huawei Mate 8 using Tapatalk
Click to expand...
Click to collapse
No. this time my rom was stock I dload NXT-AL10C00B386, lost root and unlock bl and them do OTA to EMUI 5.0.
I realy don't know when I stuck od NRD90M. One time I pull the phone out of my pocket and see red message after reboot... that's all.
Hisute can't help me, I try.
Some advices, please.

bodzio3333 said:
No. this time my rom was stock I dload NXT-AL10C00B386, lost root and unlock bl and them do OTA to EMUI 5.0.
I realy don't know when I stuck od NRD90M. One time I pull the phone out of my pocket and see red message after reboot... that's all.
Hisute can't help me, I try.
Some advices, please.
Click to expand...
Click to collapse
Is that red message verification failed message?
If yes then please unlock the bootloader again even if it says unlocked. Then it will do factory reset and the red message will disappear.
You can then try to flash the stock firmware in TWRP. You can use B368 or B386 stock firmware from another thread and flash in TWRP. That is if you have TWRP. If you don't then unlock bootloader and then install TWRP using SRK tools. You can use SRK tools for adb commands also. Just type 000 on first page off srk tools and you will get into command prompt. Using that push the TWRP into your phone. ADB is very stable in srk tools and it will always identify your device. So that problem you won't have.
I couldn't find a proper rollback for AL10 . May be some one else can give if it is there for this model. If it was L29 model then rollback package is available and you can easily rollback using that in this type of situation.
If the flashing of stock ROM worked then you try to debrand your phone to L29 later. You will have many options then and L29 firmwares are more stable. I have AL10 which I debranded to L29 & I totally recommend debranding to C432 once your problem is solved
Do the above steps only if you are on marshmallow firmware.
Don't forget :good::good::good::good::good:

I created a al10 roll back for all al10 phones. It converts it to a DL0017 dual active sim. Message me for details how to obtain it from me .. MUST have twrp installed .

Samavb said:
Is that red message verification failed message?
If yes then please unlock the bootloader again even if it says unlocked. Then it will do factory reset and the red message will disappear.
You can then try to flash the stock firmware in TWRP. You can use B368 or B386 stock firmware from another thread and flash in TWRP. That is if you have TWRP. If you don't then unlock bootloader and then install TWRP using SRK tools. You can use SRK tools for adb commands also. Just type 000 on first page off srk tools and you will get into command prompt. Using that push the TWRP into your phone. ADB is very stable in srk tools and it will always identify your device. So that problem you won't have.
I couldn't find a proper rollback for AL10 . May be some one else can give if it is there for this model. If it was L29 model then rollback package is available and you can easily rollback using that in this type of situation.
If the flashing of stock ROM worked then you try to debrand your phone to L29 later. You will have many options then and L29 firmwares are more stable. I have AL10 which I debranded to L29 & I totally recommend debranding to C432 once your problem is solved
Do the above steps only if you are on marshmallow firmware.
Don't forget :good::good::good::good::good:
Click to expand...
Click to collapse
Thank you for help
Yes it is red message verification failed message.
I'll change AL10 to L29C432 when I can do that
The bigest problem is that I stuck on androit 7.0 emui 5.0.
So maybe you help me unlock bl (I have unlock code) and flash TWPR....

Unlock bootloader ADB commands + Stock + Debrand
bodzio3333 said:
Thank you for help
Yes it is red message verification failed message.
I'll change AL10 to L29C432 when I can do that
The bigest problem is that I stuck on androit 7.0 emui 5.0.
So maybe you help me unlock bl (I have unlock code) and flash TWPR....
Click to expand...
Click to collapse
If you want to unlock bootloader through ADB?
Here are the steps.
In your phone go to settings - >developer options - > put usb debubbing ON
switch off the phone.
Press and hold the down button for 3 seconds & then connect it to the computer
It will then go to fastboot mode.
then open SRK tools
type 000 to enter the command prompt.
Type the following command
fastboot oem unlock xxxxxxxxxxxxx
In this command xxxxxxxx is your bootloader code. just replace xxxxxxx with your code and press enter.
This will unlock your bootloader & will do a factory reset.
In SRK tools there is an option for bootloader unlock but I think that is only if you are in EMUI 4.0 or EMUI 4.1 that is what I think may be anyone else who tried this option in android 7.0 can confirm but the adb commands will work.
I have enclosed screenshots for better understanding.
you have mentioned that you are in Android 7.0
Can you tell me your exact firmware that you have on your phone at the moment?
After you get rid of that red message. Your bootloader is unlocked.
There is Erecovery process - > steps below (but there is a problem with this process)
1)Switch off the phone.
2) Press and hold the volume up button and then connect your phone to computer or charger. Yes charger. Then you can download stock firmware through your WIFI - > this will also install stock firmware. But I think this won't work because of unlocked bootloader
So once again install the TWRP for Android 7.0 I think it is Twrp 3.0.2 or Twrp 3.0.3 - > this is definitely for nougat.
ADB command to install twrp recovery is
fastboot flash recovery twrp.img ( rename the TWRP to twrp.img ) in the adb.
Try to flash the stock firmware zip files in TWRP.
Here you have two options - > You can either try flashing B386 files (only one zip file) or B562 (android 7.0 - > 2 zip files - first update.zip and then the other zip file)
If you are successful in this step then your TWRP will be overwritten with stock recovery.
That is ok. don't worry. Kangvip ROM is pre-rooted ROM. So you will get root in the end. For now its ok to be on Stock at this step.
Stock Recovery + Stock ROM + bootloader locked -> then you can dload back to EMU 4.1 using B386 firmware.
Then you can unlock bootloader (again) yes its a pain + followed by TWRP + ROOT - one after the other in SRK tools its all there. you can use the options in SRK tools this time.
And once you have root again.
Take backup and save it on your SD card. (except DATA , take backup of all options listed there, why? bcoz if you include data - > it will increase the backup size and it will take more time.
*Disclaimer* -> Very tricky & risky process - proceed with caution & full attention
Then - > you can debrand - > to C432 -(debranding is very tricky process, so keep your backup handy) This should be done very carefully because any problem here means you might find less space on your internal memory. Then you will have to restore that backup to get back your space.
Here is the link to excellent tutorial by somboons Watch it carefully.
https://www.youtube.com/watch?v=JZVsIKtdgV4
Just follow that as it is for debranding from AL10 to L29-C432
I am very very sorry for all these confusing and tricky steps. Please proceed with caution when you are doing the debranding process. Do not get diverted during that process.
Yes I did all this when I debranded my Huawei Mate 8 AL10 to L29. I had lot of anxious moments, doubts & my mind started playing tricks if mate 8 was dead on few occassions. But in the end my phone prevailed. Now I am happily using L29 - Kangvip B577. That is where I want you to land up in the end.
Do not worry and do not panic any time. Be prepared to face few challenges during this process. I will help you but please share your experience and follow the steps carefully.
During debranding you might have your phone rebooting or something might happen. That time do factory reset and continue from where you left off. If you get red message - > then you have to unlock bootloader. Otherwise continue.
This whole process will test your patience & consume time. So I hope you are willing to do this. Its worth it. I learnt my lesson, I am never buying chinese version of Huawei phones/tablets again. Only European models from now onwards.
Finally
Do not forget to click on :good::good::good::good::good::good::good:
I hope you understand.

I stared few hours ago.
First unlock bl - red message disapire
After bl I was error durind format bus system run witout any problem.
Then flash TWRP 3.1.0-2 and try to flash NXT-AL10C00B368-update.zip but I see this:
http://gofile.me/6tsPr/sHOJ4cLcr
http://gofile.me/6tsPr/cXniG4g8D
Some advices?

Options
bodzio3333 said:
I stared few hours ago.
First unlock bl - red message disapire
After bl I was error durind format bus system run witout any problem.
Then flash TWRP 3.1.0-2 and try to flash NXT-AL10C00B368-update.zip but I see this:
http://gofile.me/6tsPr/sHOJ4cLcr
http://gofile.me/6tsPr/cXniG4g8D
Some advices?
Click to expand...
Click to collapse
TWRP 3.1.0.2 is actually used for flashing nougat firmwares.
Which firmware are you on right now?
Are you on nougat or marshmallow? Please provide the full firmware build number.
if your phone is on marshmallow.
TWRP version depends on your firmware.
If you are on EMUI 4.0/4.1 then pls use the TWRP 3.0.2
you can use SRK tools to install that TWRP if you are on EMUI 4.0/EMUI 4.1
Install that version. Then
Factory reset
Flash the B386 zip file in TWRP.
You can get the B386 from here https://forum.xda-developers.com/showpost.php?p=69331930&postcount=1338
If your phone is on Android Nougat.
Then you have to use dload method.
Unzip the B386 zip file.
Put the update.app in the dload folder inside your external sdcard.
Go to your dialer
*#*#2846579#*#*
Select "software upgrade"
then Select - > SD card upgrade.
And then it will reboot and install the stock firmware.
This thread has all the Stock firmwares.
https://forum.xda-developers.com/mate-8/general/huawei-mate-8-stock-firmware-official-t3391727
Hope the above steps solve your problem. If not, then we will try something else. please answer all the questions to help you better especially your full build number (firmware version).
:good::good::good::good::good:

Thank you
I'm on emui 5,0 android 7,0 nugat ROM nrd90m test-keys - before I don't remember, upgrade ota for AL10 model. Maybe AL10C00B552.
So I have to try flash nugat ROM AL10 by TWRP 3.1.0.2.
Dload method dont work - I never need sd card for this.
Can I flash nugat rom dload method? And where I find stock recovery for nugat?

TWRP & Erecovery methods
bodzio3333 said:
Thank you
I'm on emui 5,0 android 7,0 nugat ROM nrd90m test-keys - before I don't remember, upgrade ota for AL10 model. Maybe AL10C00B552.
So I have to try flash nugat ROM AL10 by TWRP 3.1.0.2.
Dload method dont work - I never need sd card for this.
Can I flash nugat rom dload method? And where I find stock recovery for nugat?
Click to expand...
Click to collapse
Since you are on nougat with test keys, try to flash the latest nougat firmware on your phone model NXT-AL10 (Try flashing firmwares using TWRP )
Link for the firmware
link 1 https://mega.nz/#!Y4IVEbxY!7C8u3FP3V8eAV4jVNmbRUfj2W1nc8p5gMtaScVmzeA0
if the link 1 doesn't work then try link 2
link 2 https://mega.nz/#!U9ZkTZzI!fbPnyDIxCGGFkiGxtF3SMicLqmTDNTq8SG8fVw8lfz8
download & flash it using TWRP.
Once you finish flashing - you should have android nougat stock B584
Go to settings - > about you should see that B584. in build number.
If your build number is showing anything other than test-keys then you will be able to use dload method or Hisuite method using PC.
Now if IT IS showing B584, then you can dload to B386. then unlock bootloader -> TWRP using SRK tools - > Root - > and then debrand to L29C432. - > this is the road map for you. we will go through this only after you succeed in the above steps.
Try the below steps only if the above steps don't work
if you want to flash the nougat recovery
then unzip the zip file in link 1.
Use Huawei update extractor software HuaweiUpdateExtractor_0.9.9.3
and then extract the recovery.img from the update.app file.
now
switch on usb debugging in your settings.
switch off the phone
press & hold volume down and then connect to phone to laptop
put the extracted recovery.img file in the same folder as the SRK tools
open SRK tools
type 000 to enter command prompt
type fastboot flash recovery recovery.img
(please remember all these steps that use adb commands come with element of risk. so please proceed with caution and go slow. Proceed with these steps only if you know what you are doing otherwise do not proceed)
Try the TWRP steps first and see if that will resolve your issue before flashing any stock recovery. If your flashing through TWRP then it will install stock recovery & stock ROM.
Please share your progress.
:good::good:

Samavb said:
Since you are on nougat with test keys, try to flash the latest nougat firmware on your phone model NXT-AL10 (Try flashing firmwares using TWRP )
Link for the firmware
link 1 https://mega.nz/#!Y4IVEbxY!7C8u3FP3V8eAV4jVNmbRUfj2W1nc8p5gMtaScVmzeA0
if the link 1 doesn't work then try link 2
link 2 https://mega.nz/#!U9ZkTZzI!fbPnyDIxCGGFkiGxtF3SMicLqmTDNTq8SG8fVw8lfz8
download & flash it using TWRP.
Once you finish flashing - you should have android nougat stock B584
Click to expand...
Click to collapse
You must know that I'm very grateful for your help
Do I have to format data before start flashing B584.zip or do nothing?
Do I need update_data_full_all_cn.zip ?

2 Answers
bodzio3333 said:
You must know that I'm very grateful for your help
Do I have to format data before start flashing B584.zip or do nothing?
Do I need update_data_full_all_cn.zip ?
Click to expand...
Click to collapse
Glad to read Ur kind words but V have a long road ahead. So let's fix ur phone :good:
Answers
1) Yes, you can format DATA before flashing this zip file. you can also do factory reset before flashing the zip file. (Remember we are doing this step only to get ur phone out of that test keys & this firmware is not ur final firmware that u will use. )
2) I was searching for a firmware that u can flash on ur phone and I found B584 and felt this might help. The guys in the other thread mentioned it as full firmware. After u flash this firmware, check in settings - > about - > build number if it is anything else other than test keys then u succeeded in this step.
Goal of this flashing of B584 is only to get rid of that test keys in build number. Once that is gone then U can downgrade to B386 using steps in my previous posts followed by the road map.
:good::good::good:

Samavb said:
Glad to read Ur kind words but V have a long road ahead. So let's fix ur phone :good:
Answers
1) Yes, you can format DATA before flashing this zip file. you can also do factory reset before flashing the zip file. (Remember we are doing this step only to get ur phone out of that test keys & this firmware is not ur final firmware that u will use. )
2) I was searching for a firmware that u can flash on ur phone and I found B584 and felt this might help. The guys in the other thread mentioned it as full firmware. After u flash this firmware, check in settings - > about - > build number if it is anything else other than test keys then u succeeded in this step.
Goal of this flashing of B584 is only to get rid of that test keys in build number. Once that is gone then U can downgrade to B386 using steps in my previous posts followed by the road map.
:good::good::good:
Click to expand...
Click to collapse
When I flash B584.zip see this error in twrp:
Failed to mount '/cust' (invalid argument)
Failed to mount '/version' (invalid argument)
E:unknown command [errno]
E:unknown command [errno]
Update process ended with ERROR: 7
No good.....

deleted

deleted

i have J730F and will going to flash twrp soon on it and what i experienced that we need Odin , custom recovery file, turning on development tool by tapping 7 times the build number then turning on OEM unlock then flashing recovery, but better to uncheck auto reboot on odin to get the recovery flash properly.
now u said u have J730GM and no idea this devices belong to which country and sim lock ?
will be sharing my result after getting succeed on my device of flashing recovery

deleted

nomadicdev said:
if you have oreo, your rom will lock you out after flashing twrp, and you'll have to wipe it all and wait a week to unlock owm unlock again. gm is singapore/thailand/ india I think. of course no sim lock, I think that's just a US thing
There's a specific method to flash twrp, and I assume one has to format and reflash the rom from within twrp after decryption
Click to expand...
Click to collapse
OH ic
well yes i have oreo and i was going to start the procedure of flashing custom recovery, my model is J7 Pro not (2017) but they both are same, now not sure what will happen after flashing custom recovery but hopping the things will go smoothly,
any thanks dear for the information

i have successfully flashed twrp the latest one on my J7 Pro with also flashing RMM-State_Bypass_Mesa_v2 and no-verity-opt-encrypt-6.0 then booted up into stock oreo rom and found my oem lock in developer options is there and my device is working absolutely fine so far
now going to flash the S9 One ui rom on it
Thank U

P9 Lite can't update

hi everyone
i have p9 lite l31 with emui 4.1.1 and mm
i can't update it to nougat can anyone tell me how ? i tried with dload and twrp and still can't
pls if u have full method tell me or give me link
ps : bootloader unlocked

rrr8 said:
hi everyone
i have p9 lite l31 with emui 4.1.1 and mm
i can't update it to nougat can anyone tell me how ? i tried with dload and twrp and still can't
pls if u have full method tell me or give me link
ps : bootloader unlocked
Click to expand...
Click to collapse
Hello,
what is your complete firmware ?
EX. VNS-L31C432B160
EX. VNS-L31C185B151
EX. VNS-L31C636B170
Having this info you can use Firmware Finder app
and upgrade to Emui 5, android 7.
I can help you doing this...
Cheers

Dadditz said:
Hello,
what is your complete firmware ?
EX. VNS-L31C432B160
EX. VNS-L31C185B151
EX. VNS-L31C636B170
Having this info you can use Firmware Finder app
and upgrade to Emui 5, android 7.
I can help you doing this...
Cheers
Click to expand...
Click to collapse
hi, thank you for your help
my complete firmware is VNS-L31C432B160
can you figure out how to update ?

rrr8 said:
hi, thank you for your help
my complete firmware is VNS-L31C432B160
can you figure out how to update ?
Click to expand...
Click to collapse
If you have TWRP on board, download two files from link, copy it to the SD card. Reboot in TWRP, flash first file update.zip , go back to the TWRP main menu and flash second file hw_eu.zip . Reboot system and do factory reset from Stock recovery .
Links (VNS-L31C432B370):
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v80460/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...-L31_hw_eu/update_data_full_VNS-L31_hw_eu.zip

thank you,
yes i have twrp but i don't know if it's the right version to install this rom
i'll try this asap and tell you about the result

rrr8 said:
thank you,
yes i have twrp but i don't know if it's the right version to install this rom
i'll try this asap and tell you about the result
Click to expand...
Click to collapse
Use this TWRP:
https://mega.nz/#!MsNXRCgI!4ZQW2ebrN-cvO21J9lJ2qz3UYwcE3onMFZzRMcdRY9o
TWRP for Nougat:
https://mega.nz/#!EsESQQhK!uc_lfXEfDW6U7Lq2VeNOYq5OWUID0G-YyhK-oUL4deU
It's recommended to install TWRP over the huawei eRecovery with the command
fastboot flash recovery2 twrp.img

bozka1 said:
Use this TWRP:
https://mega.nz/#!MsNXRCgI!4ZQW2ebrN-cvO21J9lJ2qz3UYwcE3onMFZzRMcdRY9o
TWRP for Nougat:
https://mega.nz/#!EsESQQhK!uc_lfXEfDW6U7Lq2VeNOYq5OWUID0G-YyhK-oUL4deU
It's recommended to install TWRP over the huawei eRecovery with the command
fastboot flash recovery2 twrp.img
Click to expand...
Click to collapse
thank you for all your help, sry for the late tho.
i'll try this TWRP and inform you about the result.
btw, if i flash it as recovery2, how can i boot it ?

rrr8 said:
thank you for all your help, sry for the late tho.
i'll try this TWRP and inform you about the result.
btw, if i flash it as recovery2, how can i boot it ?
Click to expand...
Click to collapse
I automatically wrote 'recovery2', but in this case it doesn't matter, the new FW will overwrite TWRP.
I apologize for the unnecessary complication .
(Why recovery2 ? eRecovery is basically useless on this phone. It's useful flash TWRP over it by having stock recovery as 'recovery' and TWRP as 'eRecovery' (recovery2).
Among other things, you can have access to official OTA updates yet still being able to do everything you could do with TWRP etc. etc.
It makes things easier
How to boot it:
reboot your phone, as soon as the "yellow warning" appears on the screen, hold down the Volume Up for 3 seconds, phone will boot in TWRP.)

bozka1 said:
I automatically wrote 'recovery2', but in this case it doesn't matter, the new FW will overwrite TWRP.
I apologize for the unnecessary complication .
(Why recovery2 ? eRecovery is basically useless on this phone. It's useful flash TWRP over it by having stock recovery as 'recovery' and TWRP as 'eRecovery' (recovery2).
Among other things, you can have access to official OTA updates yet still being able to do everything you could do with TWRP etc. etc.
It makes things easier
How to boot it:
reboot your phone, as soon as the "yellow warning" appears on the screen, hold down the Volume Up for 3 seconds, phone will boot in TWRP.)
Click to expand...
Click to collapse
thank you for all this, i'll try your method and hope it will work

rrr8 said:
hi, thank you for your help
my complete firmware is VNS-L31C432B160
can you figure out how to update ?
Click to expand...
Click to collapse
Dude,
i was replying to you suggesting to use Firmware Finder
in order to upgrade to android 7,
but i assume you will reach the same using @bozka1 guide.
Enjoy the community and good luck..
Cheers

bozka1 said:
If you have TWRP on board, download two files from link, copy it to the SD card. Reboot in TWRP, flash first file update.zip , go back to the TWRP main menu and flash second file hw_eu.zip . Reboot system and do factory reset from Stock recovery .
Links (VNS-L31C432B370):
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v80460/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...-L31_hw_eu/update_data_full_VNS-L31_hw_eu.zip
Click to expand...
Click to collapse
thanks, you saved my life, it worked !!
I successfully installed android 7 with emui 5 in my device, ty