Friends my samsung J5 is with a green screen with triangle (an error has occurred while) more every time I try in the odin always give the same error in all roms, at least the ones I tested, the error is NON-HLOS.bin , which I should do since samart switch no longer has the option of reculperation, nor the old version of kies more support, someone has a solution ..
Related
well i did a update with odin to get root back cuz i lost it due to knox and it said firmware upgrade encountered an issue. now it wont let me boot up the when i download the stock l720t firmware from sammobile odin wont get passed the write part with out saying Complete(Write) operation failed. what am i supposed to do now? ive used 3 diffrent odins and reinstalled my drivers. i just dont know plz help..
also it says odin mode write protect enabled and bust mode enabled
ok i got it the problem was i was putting it in to download mode and all i had to do was keep it on the screen that said there was a problem when i did the firmware update
The Samsung Galaxy S5 (SM-G900F) is stuck at the boot screen and keeps restarting. I cant go into recovery mode. I can only go into the download mode. I tried to flash it with odin and update it with kies. But none of it works.
At the download mode screen it says:
ODIN : flash read failure
Error: There is no pit binary
Odin screen:
<ID:0/013> Odin engine v(ID:3.1101)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013>
<ID:0/013> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help will be appreciated
Got your back.
Hey man just make sure you closed odin completely.
1. Start Kies
2.Click Tools-> Firmware upgrade and initilazation
3.Type in model of your phone for example sm-g900i which is my Australian S5 then it will ask you for your SN which is a 16 digit code serial number located on the back of your phone when you remove the battery.
Then just follow steps until it asks YOUR phone to be connected... DONT connect it yet...first put it in download mode; phone turned off; press home but, power but, and vol down bot at same time then press vol up key to enter download mode.
Connect phone; then just wait 1 hour and voila you got your phome with latest stock firmware.
Please reply to us if this worked for you as this can help new users to determine what to do.
Cheers
Sorry but English is not my first language, hope i made myself clear.
If there is anything else i can do to assist please let me know.:laugh:
Which Kies works with the S5? Because neither seem to be working
I'm having pretty much the same problem, had a bad flash and can't boot into recovery or get it detected in Kies
And I can't flash stock Marshmallow or Lollipop till I finish downloading them
Going through firmware upgrade and installation option and putting in the model just causes Kies to freeze using either version
WalkableBuffalo said:
Which Kies works with the S5? Because neither seem to be working
I'm having pretty much the same problem, had a bad flash and can't boot into recovery or get it detected in Kies
And I can't flash stock Marshmallow or Lollipop till I finish downloading them
Going through firmware upgrade and installation option and putting in the model just causes Kies to freeze using either version
Click to expand...
Click to collapse
Kies will automaticlly download the correct atock fw.....just use Kies lite versiom which is the one i used a couple of days ago and had exactly the same problem as you i actually had a corrupter pit file so there was no partition being found...again install and use lite kies for samsung then just dlow the steps ut should automatically download the firmware and install it into samsung at the same time you shpuld not remove the cable whatsoever during download and installation and actually make sure yu have the drivers for samsung installed and that the usb cable you are using is original....hope it works if you need a detailed guide with instalation steps let me know or heck i cpuld even help out with a video just let me know.
Hope you get it sorted and if you do please let us all know so in the furute people can see the answer.
Cheers.
It's alright I fixed it now, still couldn't get Kies to work
I flashed the latest version of Lollipop (no carrier) to the phone, which initially sent it into a bootloop. But that enabled recovery again so I did a data and cache wipe, flashed the same ROM from ODIN again and it worked
History:
Phone need to unlock from Germany 02
Using Z3x box newest software it failed.
try flashing combination file COMBINATION_FAC_FA51_A510FXXU3API1
it failed!
Now phone is in factory binary mode.
Tried this firmware from Z3x support A510F_XXU2APC4_VFG2APC2
also failed in: sboot.bin and param.bin
Now I'm trying to download 6.01 firmware from Germany 02 I hope this time flashing with odin continues and will not stop.
Can you you give me any advise pls.
WINPINPH said:
History:
Phone need to unlock from Germany 02
Using Z3x box newest software it failed.
try flashing combination file COMBINATION_FAC_FA51_A510FXXU3API1
it failed!
Now phone is in factory binary mode.
Tried this firmware from Z3x support A510F_XXU2APC4_VFG2APC2
also failed in: sboot.bin and param.bin
Now I'm trying to download 6.01 firmware from Germany 02 I hope this time flashing with odin continues and will not stop.
Can you you give me any advise pls.
Click to expand...
Click to collapse
First one looks like Rev 3 lollipop firmware, second looks like Rev 2 lollipop firmware.
Flash MM firmware.
So, I purchased a damaged Note 4 and took the motherboard and put it in a Note 4 with broken motherboard. When booting up the phone the first time there was only TWRP and no system so I tried flashing it with original firmware but it failed. After this I've tried downloading ROMs and flashing through TWRP but it did not work. Recently I tried to follow this guide:
https://forum.xda-developers.com/no...ebrick-img-t3488114/post69489251#post69489251
To reinstall the firmware on the phone and I've managed to flash boot, recovery and PIT(different flash) but it fails every time when flashing system. On the phone I had error message:
[9] eMMC write fail: SYSTEM
ODIN : flash write failure
and in Odin it said:
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Write)
I've tried several times, changed the cable, different USB-ports, re-installing drivers, tried Odin 3.07 and 3.09 but get the same error every time. Also tried emergency reset through Smart Switch but it didn't worked either.
Now I've tried to install TWRP and if I try to boot into it I get directly to Download Mode and the to text says:
Could not do normal boot.
ddi: mmc_read failed
I have tried eveything I can think of and have had no success so far. Anybody who gan give some pointers on how to approach this? Or could it be hardware fault and I should just scrap the device? It's the European version, SM-N910F.
Thanks in advance!
Edit: If somebody gives me the solution that helps me get the phone working I can donate $25 through PayPal as thanks for the help
Ahh, the infamous eMMC memory error. It sometimes appears when flashing TWRP and a custom rom, but then never appears when flashing a stock rom. However, if it appears when flashing stock, then I'm sorry to say but it's a fatal hardware error: your memory is on its way out. Your only solution is to either replace the board or get a new device.
As the dude above implies. eMMC is destroyed. Note 4 and galaxy s3 had these problems... it's hardware based unfortunately...
Sent from my SM-G955F using Tapatalk
I got this S7, wanted to flash 930U firmware to use T-Mobile but a failed flash has me in a boot loop. I fully updated before trying to flash, so it is I assume on the newest bootloader, etc.
I have attempted the newest firmware files that I can find (G930AUCS4BQL1) but am still getting the SW REV CHECK FAIL through Odin.
Are there files available that will fix this, do I just need to wait for them to come out, or have I bricked this thing?
Thanks for any help and have a great day!
Update:
- Using PrinceComsy Odin results in: FAIL! (Auth)
- USB Debugging is OFF and I am unable to boot to change that
- I am leaving the BL file blank in ODIN
perhaps you should try using offcial odin when flashing official images.
try version 3.12.3. whatever you do, don't use the princecomsy version unless for flashing engboot