Related
I was trying to reset the whole device because I've uninstalled some stock apps by accident using Titanium backup. So I tried to recover my device through the recovery mode and start fresh. The stock apps was still gone...
So I figure I can use Odin3 v1.87 to flash the whole device with the firmware from http://www.sammobile.com/firmware/
I thought that would most likely get me back to the factory settings with everything and start fresh. But then Odin needs PDA, PHONE, CSC to run and the firmware only gave me one P6800OZSLP7_P6800ZSLP7_HOME.tar.md5 I was like how can I use this...
Then I found a guide in XDA how to separate it out into the three sections.
http://forum.xda-developers.com/show...64&postcount=9
I was like finally i can start this fresh. Things got worse.... every time it flashes to modem.bin it got stuck. It can never go through that part of the flashing. I then want to give up and use CWM to recover it back. Now i dont have 3g anymore on my tablet. Can someone teach me how to reset the whole thing back to stock?
As you can tell from the firmware i used is an HK Galaxy Tab 7.7 in ICS.
Thank you so much!
stick the tar.md5 file in pda and flash with odin it will flash everything to the correct places. DO NO TICK DO NOT TICK RE-PARTITION
Sent from my GT-P6800 using xda premium
I tried it and this is what i get:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P6800OZSLP7_P6800ZSLP7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> cache.img
<ID:0/006> factoryfs.img
<ID:0/006> hidden.img
<ID:0/006> param.lfs
<ID:0/006> recovery.img
<ID:0/006> Sbl.bin
<ID:0/006> zImage
<ID:0/006> modem.bin
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
So I guess it couldnt write to it?
Do you have a P6810 or a P6800 ?
Sent from my GT-P6800 using xda premium
kishd said:
Do you have a P6810 or a P6800 ?
Sent from my GT-P6800 using xda premium
Click to expand...
Click to collapse
I have p6800 currently my problem is that when i tried to use cwm to restore it, it is restored but it can detect the 3g portion and not recognize my sim card.
naihochow said:
I have p6800 currently my problem is that when i tried to use cwm to restore it, it is restored but it can detect the 3g portion and not recognize my sim card.
Click to expand...
Click to collapse
I realized what happened i must have click repartition earlier now my device only has like 44mb hence the reason why it wouldnt finish flashing b/c it ran out of space. Do any of you know how to repartition the device back to the correct size?
Actually i got it fix all i needed to do is to wipe the cache and maybe flashing it with the right pit i'm not sure but everything is working now thanks everyone
Samsung Galaxy Tab 7.7 recovery code
I desperately need the stock recovery code of Samsung Galaxy Tab 7.7 because got stuck in a screen with notice: ",.Firmware upgrade encountered an issue. Please select recovery mode in kies & try again." But Kies is asking me for a recovery code. What is the recovery code please?
naihochow said:
I was trying to reset the whole device because I've uninstalled some stock apps by accident using Titanium backup. So I tried to recover my device through the recovery mode and start fresh. The stock apps was still gone...
So I figure I can use Odin3 v1.87 to flash the whole device with the firmware from http://www.sammobile.com/firmware/
I thought that would most likely get me back to the factory settings with everything and start fresh. But then Odin needs PDA, PHONE, CSC to run and the firmware only gave me one P6800OZSLP7_P6800ZSLP7_HOME.tar.md5 I was like how can I use this...
Then I found a guide in XDA how to separate it out into the three sections.
http://forum.xda-developers.com/show...64&postcount=9
I was like finally i can start this fresh. Things got worse.... every time it flashes to modem.bin it got stuck. It can never go through that part of the flashing. I then want to give up and use CWM to recover it back. Now i dont have 3g anymore on my tablet. Can someone teach me how to reset the whole thing back to stock?
As you can tell from the firmware i used is an HK Galaxy Tab 7.7 in ICS.
Thank you so much!
Click to expand...
Click to collapse
diomedecassar said:
I desperately need the stock recovery code of Samsung Galaxy Tab 7.7 because got stuck in a screen with notice: ",.Firmware upgrade encountered an issue. Please select recovery mode in kies & try again." But Kies is asking me for a recovery code. What is the recovery code please?
Click to expand...
Click to collapse
please download the stock firmware and flash it using pc odin in download mode
diomedecassar said:
I desperately need the stock recovery code of Samsung Galaxy Tab 7.7 because got stuck in a screen with notice: ",.Firmware upgrade encountered an issue. Please select recovery mode in kies & try again." But Kies is asking me for a recovery code. What is the recovery code please?
Click to expand...
Click to collapse
I tried contacting Samsung to see if I could get the recovery code but they never gave it to me. What happened? did you try to flash a different rom and got stuck?
naihochow said:
Actually i got it fix all i needed to do is to wipe the cache and maybe flashing it with the right pit i'm not sure but everything is working now thanks everyone
Click to expand...
Click to collapse
Hi Bro I got the same problem too, if you don't mind can you explain me how to fix it in detail,
thanks.
Could someone please give a link or information on how to downgrade from ICS to HC?
I've tried just putting original firmware to odin, but then my device gets stuck at samsung sign when booting.
Thanks for help.
P.S. i've flashed my device with odin from HC to ICS a month ago.
kaimyns said:
I've tried just putting original firmware to odin, but then my device gets stuck at samsung sign when booting.
Click to expand...
Click to collapse
After flashing HC via Odin or before?
If after, when stuck at Samsung Logo....but to recovery using 3 button combo, wipe cache and data.
Reboot
It's after and thanks for help!
Astrix Ashburn said:
After flashing HC via Odin or before?
If after, when stuck at Samsung Logo....but to recovery using 3 button combo, wipe cache and data.
Reboot
Click to expand...
Click to collapse
kaimyns said:
It's after and thanks for help!
Click to expand...
Click to collapse
You manage to get back to HC Homescreen by now?
Yes, samsung loaded HC and i can use it
Astrix Ashburn said:
You manage to get back to HC Homescreen by now?
Click to expand...
Click to collapse
kaimyns said:
Yes, samsung loaded HC and i can use it
Click to expand...
Click to collapse
Mind sharing what the reason you downgrade to HC?
Fix Can't Mount any on device. Firm upgrade but not Complete using Odin, Bootloop.
tharpauklay said:
Hi Bro I got the same problem too, if you don't mind can you explain me how to fix it in detail,
thanks.
Click to expand...
Click to collapse
THIS STOCK RECOVERY ONLY WORKS ON P6800 OTHER DEVICE NON TESTED.
What Do You Need To Fix This
1. Odin and Pit get it Here ---> Odin3 v1.85.rar Pit and CWM Include in Odin.
2. Use this Stock Rom P6800XXLQ1_P6800OXALQ1_ATO. This is Open Austria Stock Rom Get it here ==>> Download and Unzip.
3. USB Connector.
3. All You Have and you a ready to Go.
4. Open Odin
5. Tab to Download Mode (( Start + Down Vol ))
6. Connect USB
7. Make Sure the port com detected.
8. Put the Pit file to PIT. Make Sure the PIT is GT-P6800 PIT for P6800XXLQ1_P6800OXALQ1_ATO.pit
9. On Files PDA Make Sure it's XXLQ1_OXALQ1_ATO.md5
10. Make Sure Tick Re-Partition, Auto Reboot and F. Reset Time
11. If you are Ready. Hit the START.
12. If you are successful Com Port box on the Blue and Green in color after the reset and show a pass.
Hope this will Help...
I just wanted to see if there is kies update for my tablet
Astrix Ashburn said:
Mind sharing what the reason you downgrade to HC?
Click to expand...
Click to collapse
Benpd said:
THIS STOCK RECOVERY ONLY WORKS ON P6800 OTHER DEVICE NON TESTED.
What Do You Need To Fix This
1. Odin and Pit get it Here ---> Odin3 v1.85.rar Pit and CWM Include in Odin.
2. Use this Stock Rom P6800XXLQ1_P6800OXALQ1_ATO. This is Open Austria Stock Rom Get it here ==>> Download and Unzip.
3. USB Connector.
3. All You Have and you a ready to Go.
4. Open Odin
5. Tab to Download Mode (( Start + Down Vol ))
6. Connect USB
7. Make Sure the port com detected.
8. Put the Pit file to PIT. Make Sure the PIT is GT-P6800 PIT for P6800XXLQ1_P6800OXALQ1_ATO.pit
9. On Files PDA Make Sure it's XXLQ1_OXALQ1_ATO.md5
10. Make Sure Tick Re-Partition, Auto Reboot and F. Reset Time
11. If you are Ready. Hit the START.
12. If you are successful Com Port box on the Blue and Green in color after the reset and show a pass.
Hope this will Help...
Click to expand...
Click to collapse
Help! Would doing this get Samsung Kies to work again?
I believe I have the HK GT-P6800. However, the box has a bunch of Arab texts on it. I bought it from Ebay.
Hi folks,
Having searched the forums I couldn't find an answer.
The problem I'm getting is when I get into download mode. I see the normal green android icon but at the top there is a grey caption saying: Write protection: Enabled.
I've been trying to flash twrp custom recovery but odin tries to do it and at the end it tells me success:0 failed:0.
That's all strange enough as previosly I managed to root the s4 using chainfire's Autoroot.
Could anyone tell me why is this happening and how to jump over it and install TWRP recovery.
//edit
I didn't check before I rooted the device but now I can't access stock recovery.
Cheers.
Ps. the device is: rooted i9505 running XXUAMDC stock rom, network: Three UK.
Attached is a screenshot of what I mean.
Thank you.
Didn't the TWRP site suggest using GooManager to install if you're rooted? Maybe give that a shot.
My unbranded UK s4 also said write protection enabled however I've had no problem installing twrp recovery.
Flashed via odin after putting phone into download mode... Have twrp in pda and it's checked in the box next to it...
Sent from my GT-I9505 using xda premium
chalger said:
Hi folks,
Having searched the forums I couldn't find an answer.
The problem I'm getting is when I get into download mode. I see the normal green android icon but at the top there is a grey caption saying: Write protection: Enabled.
I've been trying to flash twrp custom recovery but odin tries to do it and at the end it tells me success:0 failed:0.
That's all strange enough as previosly I managed to root the s4 using chainfire's Autoroot.
Could anyone tell me why is this happening and how to jump over it and install TWRP recovery.
//edit
I didn't check before I rooted the device but now I can't access stock recovery.
Cheers.
Ps. the device is: rooted i9505 running stock rom, network: Three UK.
Click to expand...
Click to collapse
I have the same issue. I'm stock XXUAMDE with CF-ROOT.
I haven't tried to flash TWRP but I can't boot into stock recovery.
It says 'booting recovery' in blue but then just hangs.
Have you tried using Super SU app and unrooting?
Ok.
I tried using GOOmanager, it cannot find suitable recovery for my device (which is strange as you may find it through TWRP web page).
When I choose in GOO to reboot to recovery it actually gets me to stock recovery (I still can NOT get into recovery using power+home+UP)
When i try to flash TWRP using (newly discovered via GOO) stock recovery it looks like that:
There is a broken android icon (see 1st attached file) and the text
-reboot system now
-apply update via ADB
[.....]
# MANUAL MODE #
Applying Multi-CSC
Applied the CSC-Code : H3G (btw H3G is my carrier, three UK)
Successfully applied multi-CSC
when I choose the recovery file to flash I'm getting response that E:\signature verification failed
Again everything I've done with the phone was CFroot, that is it. No custom rom etc or other playing with it.
//edit
I have the same issue. I'm stock XXUAMDE with CF-ROOT.
I haven't tried to flash TWRP but I can't boot into stock recovery.
It says 'booting recovery' in blue but then just hangs.
Click to expand...
Click to collapse
I've got EXACTLY the same behaviour. I discovered GOO manager allowed me to boot into stock recovery.
Thanks for your interest.
chalger
If you're having problems check the thread here: http://forum.xda-developers.com/showthread.php?t=2266336
It's the same method I used to root my phone and flash TWRP. (I too have write protection enabled)
write protection enabled means nothing
I have the exact same thing written on mine.
I have CF-Auto-Rooted mine AND TWRP 2.5 placed on mine, both using ODIN method.
No issues at all - both work perfectly fine.
chalger said:
(I still can NOT get into recovery using power+home+UP)
Click to expand...
Click to collapse
Try using just the Vol Up+Power. Once the phone vibrates, let go of the power but keep holding the up key until you see something appear on the screen. That works on my non-rooted phone to get into recovery.
Hiya
Just for your information.
I've done factory reset, it preserved root access (which I found strange) and now I've managed to flash twrp recovery (which in my view is way too much touch sensitive )
Thanks for all the replies.
problem rooting i9505
chalger said:
Hiya
Just for your information.
I've done factory reset, it preserved root access (which I found strange) and now I've managed to flash twrp recovery (which in my view is way too much touch sensitive )
Thanks for all the replies.
Click to expand...
Click to collapse
Hi All,
Just got my galaxy s4 i9505 with baseband XXUAME2. Have been trying to root this using CFROOT via odin numerous times but each time it fails. The error message includes "write operation failed" and "No PIT partion".
I have downloaded the correct PIT file and tried again but the same problem again.
I have further tried to flash pre-rooted firmware and another stock firmware but again - nothing I do seems to work.
Have tried the factory reset as well but again does not work.
Have tried flashing using motochopper method but also does not work.
Was hoping if someone could kindly extend his/her expertise - I am completely clueless at this point..
Ok for those getting the following error using Odin,
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Removed!!
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I was getting the same errors whenever I tried to flash anything and couldn't figure out why. Now I seem to have sorted it.
Try this.
DO NOT HAVE ODIN OPEN YET
Stop KIES on your PC if it is on.
1) Put your phone into Download mode, (Home, Vol Down, Power at same time).
2) Connect your USB to PC/Laptop and phone.
3) Press UP on your phone.
4) now, open ODIN. <---only open AFTER your have pressed UP on your phone. COM and "Added" should be showing.
5) Flash what you need to flash.
(I noticed previously when I had Odin open, then pressed UP, it would show as "Added" and a Com would show, but I would ALWAYS get the Pit error and a Red FAIL)
I have now tried this method several times on the trot, flashed CWM with success, (where as it was always failing previously), and re-flashed other ROMS with success each time.
Hope this helps others.
Still failing to flash anything usin odin
artnada said:
Ok for those getting the following error using Odin,
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Removed!!
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I was getting the same errors whenever I tried to flash anything and couldn't figure out why. Now I seem to have sorted it.
Try this.
DO NOT HAVE ODIN OPEN YET
Stop KIES on your PC if it is on.
1) Put your phone into Download mode, (Home, Vol Down, Power at same time).
2) Connect your USB to PC/Laptop and phone.
3) Press UP on your phone.
4) now, open ODIN. <---only open AFTER your have pressed UP on your phone. COM and "Added" should be showing.
5) Flash what you need to flash.
(I noticed previously when I had Odin open, then pressed UP, it would show as "Added" and a Com would show, but I would ALWAYS get the Pit error and a Red FAIL)
I have now tried this method several times on the trot, flashed CWM with success, (where as it was always failing previously), and re-flashed other ROMS with success each time.
Hope this helps others.
Click to expand...
Click to collapse
Hi i have tried the above. Same problem persists.
I do not have Kies on my pc. Have tried steps listed above as is but still no luck.
need help
Anjamil said:
Hi i have tried the above. Same problem persists.
I do not have Kies on my pc. Have tried steps listed above as is but still no luck.
need help
Click to expand...
Click to collapse
Me too i have the same problem .. any other method to flash back to original fiemware ?
cheers
Indra
problem solved
I used odin 1.85 and original usb cable that came in the
box. Problem solved am now able to flash all roms
I'm having exxcactly the same problem, but i can't boot the phone, it's just stuck on s4 screen, can someone help?
Thanks in advance.
Thanks for this. That solved my issue.
artnada said:
Ok for those getting the following error using Odin,
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Removed!!
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I was getting the same errors whenever I tried to flash anything and couldn't figure out why. Now I seem to have sorted it.
Try this.
DO NOT HAVE ODIN OPEN YET
Stop KIES on your PC if it is on.
1) Put your phone into Download mode, (Home, Vol Down, Power at same time).
2) Connect your USB to PC/Laptop and phone.
3) Press UP on your phone.
4) now, open ODIN. <---only open AFTER your have pressed UP on your phone. COM and "Added" should be showing.
5) Flash what you need to flash.
(I noticed previously when I had Odin open, then pressed UP, it would show as "Added" and a Com would show, but I would ALWAYS get the Pit error and a Red FAIL)
I have now tried this method several times on the trot, flashed CWM with success, (where as it was always failing previously), and re-flashed other ROMS with success each time.
Hope this helps others.
Click to expand...
Click to collapse
First time i tried to install a custom recovery on my S4 I9505 LTE. With Odin.. It didn't work..
I knew about heimdall.. And i gave that a try. And it worked perfectly. The one thing that's a bit weird.. After it first worked through heimdall. I could flash any custom recovery through Odin. But I think you should give heimdall a try..
Here is a link to how to install CWM on the cyanogenmod wiki: wiki.cyanogenmod.org/w/Install_CM_for_jfltexx#Installing_a_custom_recovery_on_Galaxy_S4_.28International_LTE.29 (I can't post links yet. So i just removed the http)
i flashed modern , and, it is fail, what wrong
[/url][/IMG]
my phone have this entry : "write protection : enable"
on my phone is also 'write protected- enable' but odin and cwm work fine
Hi, my brother-in-law tried to root his phone but probably didn't know what he was doing with Odin and Kies. I tried to restore the phone with Kies3 but the phone is not recognized and I can't get a recovery code. I've tried the default option of booting into recovery mode and flashing with Odin as Administrator. I'm flashing following a guide on this forum using [Auto Reboot] [F. Reset Time] checked in the options and loading [AP] [CP] [CSC] first. Others have commented not to use the [BL] file. The problem is when I try to flash it fails and I get this message:
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> boot.img
<ID:0/007> NAND Write Start!!
<ID:0/007> recovery.img
<ID:0/007> system.img.ext4
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
On the screen of the phone it says:
UDC START
SYS REV CHECK FAIL : Refer 3 > Binary 1
SECURE CHECK FAIL : system
Click to expand...
Click to collapse
I've tried everything I could flashing each one by one [BL] [AP] [CP] and [CSC]. Apparently the only one that successfully flashed through was [CP]. The phone can boot into recovery mode fine, when I start the phone normally it just hangs on the Samsung Galaxy S5 screen. Any help in the right direction would be appreciated. I have pretty much GoogledFu'd all the information I can and am using the stock Samsung Galaxy S5 SM-G900A firmware. I have tried different USB ports, the stock Samsung USB cable, and an LG USB cable and that didn't help either.
To flash the firmware using Odin you need to put the phone in Download mode (Power + home + volume down) and not recovery mode. Select PDA/AP in Odin, select the firmware and then click start.
DigitalBeating said:
Hi, my brother-in-law tried to root his phone but probably didn't know what he was doing with Odin and Kies. I tried to restore the phone with Kies3 but the phone is not recognized and I can't get a recovery code. I've tried the default option of booting into recovery mode and flashing with Odin as Administrator. I'm flashing following a guide on this forum using [Auto Reboot] [F. Reset Time] checked in the options and loading [AP] [CP] [CSC] first. Others have commented not to use the [BL] file. The problem is when I try to flash it fails and I get this message:
On the screen of the phone it says:
I've tried everything I could flashing each one by one [BL] [AP] [CP] and [CSC]. Apparently the only one that successfully flashed through was [CP]. The phone can boot into recovery mode fine, when I start the phone normally it just hangs on the Samsung Galaxy S5 screen. Any help in the right direction would be appreciated. I have pretty much GoogledFu'd all the information I can and am using the stock Samsung Galaxy S5 SM-G900A firmware. I have tried different USB ports, the stock Samsung USB cable, and an LG USB cable and that didn't help either.
Click to expand...
Click to collapse
Yes, I already have done that and the only thing that writes successfully is the [CP] file. It fails to write to the NAND and does a FAIL! (Auth). Not sure what else I can do.
Alright I think I figured exactly what he did to the phone. Apparently AT&T locked the bootloader on Lollipop and his phone got upgraded to Lollipop while he was sleeping. So he tried to use Odin to flash the AP for the older KitKat back onto the S5 and this softbricked the phone. As far as I have read there is no way to downgrade back currently to KitKat to get root access. I'm trying to look for stock firmware for Lollipop but I can't find anything for this model. I assume if I flash it back to the latest Lollipop version functionality will be restored. Someone said something about flashing a kernel but I don't know. Not really sure what to do now since I can't find official Samsung S5 SM-G900A firmware to flash back either through the recovery or through Odin.
DigitalBeating said:
Alright I think I figured exactly what he did to the phone. Apparently AT&T locked the bootloader on Lollipop and his phone got upgraded to Lollipop while he was sleeping. So he tried to use Odin to flash the AP for the older KitKat back onto the S5 and this softbricked the phone. As far as I have read there is no way to downgrade back currently to KitKat to get root access. I'm trying to look for stock firmware for Lollipop but I can't find anything for this model. I assume if I flash it back to the latest Lollipop version functionality will be restored. Someone said something about flashing a kernel but I don't know. Not really sure what to do now since I can't find official Samsung S5 SM-G900A firmware to flash back either through the recovery or through Odin.
Click to expand...
Click to collapse
I am currently in the same boat. Please tell me you found a fix for this and if so, what was it? Any help is greatly appreciated.
@DigitalBeating and @Theamazingcorey
Here is an AT&T lollipop firmware.....
https://www.androidfilehost.com/?fid=24591000424940454
G900AUCU4COI5_ATT4COI5_v5.1.1_Repair_Firmware
I found it (by chance) on a Russian hosting site. They say it's a 'repair' firmware which means it is more than likely going to be more than one file (it'll probably be bootloader, modem and OS) So you'll have to load each file into it's respective Odin 'slot'.
If I understand how repair firmwares work, it should wipe and format the data partitions (instead of simply overwriting them) as it flashes. This will give the best chance of a successful flash.....
http://i.imgur.com/rVnFwJM.jpg
I cannot thank you enough, that seems to have fixed my problem. I though I was going to be stuck with a paperweight, lol.
Would you happen to know if there is a way to root the the AT&T S5 with 5.1.1?
Glad it worked fella.....
With regards to rooting, everything I've read on XDA indicates AT&T Lollipop can't be rooted....and the possibility of downgrading to achieve root is non existent.......
But there's a LOT if information on XDA, and I'll be the first to admit that I haven't read it all........
http://i.imgur.com/rVnFwJM.jpg
@Theamazingcorey just out of interest, can you confirm what files were inside the zip?
http://i.imgur.com/rVnFwJM.jpg
Thanks for the info. Sorry I was not able to get back to you sooner, I've been slammed these last couple of days. Have family coming into town this evening and between work and getting ready for their visit, I haven't had time to think straight, lol.
Hi just bought new samsung note 4 n910f. When I was trying to update via OTA I got messege that my software is modified so I discover that phone is rooted so I unroot and downloading via OTA but when I press install phone reboot and after few seconds I see android green robot with error and phone restart again. I was trying to update via kies but after downloading 2 gigs phone stucks for 1 hour on 0% of installing. HOw to avoid this problems and get marsmallow (via OTA getting lollipop only)
neomesjasz said:
Hi just bought new samsung note 4 n910f. When I was trying to update via OTA I got messege that my software is modified so I discover that phone is rooted so I unroot and downloading via OTA but when I press install phone reboot and after few seconds I see android green robot with error and phone restart again. I was trying to update via kies but after downloading 2 gigs phone stucks for 1 hour on 0% of installing. HOw to avoid this problems and get marsmallow (via OTA getting lollipop only)
Click to expand...
Click to collapse
What model number shows At the top left of green android guy. Sm-N910f or something else ?
Trex888 said:
What model number shows At the top left of green android guy. Sm-N910f or something else ?
Click to expand...
Click to collapse
sm 910f
neomesjasz said:
sm 910f
Click to expand...
Click to collapse
Do you know how to flash stuff in odin ?
Trex888 said:
Do you know how to flash stuff in odin ?
Click to expand...
Click to collapse
Didint do it long time but it is managable
neomesjasz said:
Didint do it long time but it is managable
Click to expand...
Click to collapse
Download marshmallow firmware link below
https://www.androidfilehost.com/?fid=24533103863144180
Before begin make sure you have samsung kies installed on pc or samsung usb drivers installed
Steps
Extract firmware file using winrar or winzip
Go to download mode by pressing volume down+home+power all buttons together you'll see warning press volume up
Connect phone via usb cable
Open odin
Choose (AP) tab in odin
Select firmware that you extracted
Once firmware choose in odin AP wait few minutes odin will hang for a while
Once firmware uploaded to odin hit start
Wait until odin shows PASS
Immediately go to recovery by pressing volumeup+home+power 3button combo until you'll see blue recovery boot at top left corner let go all buttons
In recovery make wipe cache+data factory reset
Reboot and wait 5 to 7 minutes
You're done congrats
Trex888 said:
Download marshmallow firmware link below
https://www.androidfilehost.com/?fid=24533103863144180
Steps
Extract firmware file using winrar or winzip
Go to download mode by pressing volume down+home+power all buttons together you'll see warning press volume up
Connect phone via usb cable
Open odin
Choose (AP) tab in odin
Select firmware that you extracted
Once firmware choose in odin AP wait few minutes odin will hang for a while
Once firmware uploaded to odin hit start
Wait until odin shows PASS
Immediately go to recovery by pressing volumeup+home+power 3button combo until you'll see blue recovery boot at top left corner let go all buttons
In recovery make wipe cache+data factory reset
Reboot and wait 5 to 7 minutes
You're done congrats
Click to expand...
Click to collapse
thanks will try as soon as I finish downloading
neomesjasz said:
thanks will try as soon as I finish downloading
Click to expand...
Click to collapse
I wanna warn you before start this process
If your model is n910f then go ahead and flash
Make sure in download mode the model shows sm-n910f otherwise you'll have some serious issues and it can brick your device and useless if model is different like n910v n910a n910t etc.
Report back as soon as you get any results.
Trex888 said:
I wanna warn you before start this process
If your model is n910f then go ahead and flash
Make sure in download mode the model shows sm-n910f otherwise you'll have some serious issues and it can brick your device and useless if model is different like n910v n910a n910t etc.
Report back as soon as you get any results.
Click to expand...
Click to collapse
odin stuck at:
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
nothing is happening, i tried wipe cache and data but nothing is working just stuck at this 1% of installing. It is feel like something is blocking installation (3 diffrent methods)
neomesjasz said:
odin stuck at:
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
nothing is happening, i tried wipe cache and data but nothing is working just stuck at this 1% of installing. It is feel like something is blocking installation (3 diffrent methods)
Click to expand...
Click to collapse
Did odin fail with red box?or just stuck ?
Take pic of download mode and show me
Clear pic please
Try restart pc and try again
Will do it today after work it is 3 am now here anyway thanks for help
Trex888 said:
Did odin fail with red box?or just stuck ?
Take pic of download mode and show me
Clear pic please
Try restart pc and try again
Click to expand...
Click to collapse
Thanks for help, tried today after restart odin works just got it new fresh android 6.0.1
Thanks again
Hi, also I am trying to root my device but it stucks at 1 % , trying with normal root and autoroot and cant move more then 1 % what is blocking my phone
hello
i tried to flash a custom ROM tom TWRP and it fails, and after i rebooted the phone it starts normally, then i wanted to enter the recovery again to try flashing another zip files that i copied in the phone storage, i used 'android commander' to boot into recovery, but the phone takes me to the downloading mode, and now i can't start the system neither boot into recovery (every boot take to download mode)
i think the problem is in the bootloader, i've downloaded one from here:
https://androidfilehost.com/?w=files&flid=26335
i tried to flash it from odin and i get:
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> NAND Write Start!!
<ID:0/015> SingleDownload.
<ID:0/015> aboot.mbn
<ID:0/015> sbl1.mbn
<ID:0/015> rpm.mbn
<ID:0/015> FAIL! (Auth)
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
how to get out from this mode and start the phone normally?
help me please.
already tried to flash the stock Rom with Odin3?
Maxikinq said:
already tried to flash the stock Rom with Odin3?
Click to expand...
Click to collapse
after a time a found that the phone is booting normally again, i've installed the TWRP app and flashed the .img recovery (like i did before), but when booting into recovery it takes me to download mode.
i've noticed that in the recovery it is written in phone model: N910P and not N910F, i think the problem may be here, how to get it back to N910F?
yes, i tried to flash the stock ROM (i've downloaded it from sammobile.com) N910FXXU1DQHC_N910FBTU1DQH1_N910FXXS1DQA1_HOME.tar.md5 (android V6) and i get the same problem (auth).
this is my old ROM: N910FXXU1COH4
i've downloaded this: N910FXXU1COH4_N910FOXA1BOC3_alexndr.7z (android V5)
should i try to flash this and then i re-falsh the other one (i want to install a ROM that has android V6 or V7)?
You can use the Smart Switch for Samsung to get your original firmware - it requires the serial number of your phone.
At least you can have back the original OS. And see from there where do you want to go.
w41ru5 said:
You can use the Smart Switch for Samsung to get your original firmware - it requires the serial number of your phone.
At least you can have back the original OS. And see from there where do you want to go.
Click to expand...
Click to collapse
that program didn't give me anything helpful, i couldn't get the OS from it.
should i try odin again with the old version?
i finally could enter the TWRP recovery again
i tried this rom:
https://forum.xda-developers.com/note-4/snapdragon-dev/rom-resurrection-remix-5-8-0-t3523130
but it didn't work, i get 'error 7'.
What did you do to get back to TWRP???
I've tried to flash, failed a few times before success, but it was buggy, so I tried to go back to recovery to find I'm stuck in download mode permanently..... I've tried to force it out by using dr. fone and all other sorts but they all fail. IDK what to do..
ControversalRandom said:
I've tried to flash, failed a few times before success, but it was buggy, so I tried to go back to recovery to find I'm stuck in download mode permanently..... I've tried to force it out by using dr. fone and all other sorts but they all fail. IDK what to do..
Click to expand...
Click to collapse
in my first problem with this device, i could enter the recovery again after several tries, and i could flash a rom (lineage-14.1-20170825-UNOFFICIAL-trltespr) throught it.
now the phone is stuck again in download mode, and when i try to flash this rom: (N910FXXU1COH4_N910FOXA1BOC3_alexndr) i get: (There is no PIT partition)
i've downloaded the pit file of N910F, the phone was showing that my version is: N910FXXU1COH4, but in download mode it shows: N910P
i'm confused, what pit files should i use?
my phone is a gsm and not a cdma.
ARDV said:
in my first problem with this device, i could enter the recovery again after several tries, and i could flash a rom (lineage-14.1-20170825-UNOFFICIAL-trltespr) throught it.
now the phone is stuck again in download mode, and when i try to flash this rom: (N910FXXU1COH4_N910FOXA1BOC3_alexndr) i get: (There is no PIT partition)
i've downloaded the pit file of N910F, the phone was showing that my version is: N910FXXU1COH4, but in download mode it shows: N910P
i'm confused, what pit files should i use?
my phone is a gsm and not a cdma.
Click to expand...
Click to collapse
Yeah, I flashed Lineage on my phone successfully and I like the rom so Im just gonna stick with it, I've flashed a few others without a problem, not getting stuck, and I was also able to use a PC program to "force" it out of download mode.
ControversalRandom said:
Yeah, I flashed Lineage on my phone successfully and I like the rom so Im just gonna stick with it, I've flashed a few others without a problem, not getting stuck, and I was also able to use a PC program to "force" it out of download mode.
Click to expand...
Click to collapse
"I was also able to use a PC program to "force" it out of download mode. " which program is that?