hello ,
how r u team,
huawei nxt-al10 in huawei activation mode, i decide to downgrade, and after that, device stuck on recovery mode,
and need to connect with wifi for fix recovery, i connected and update, but after update device still same, and even no more touch working, so i,m no longer to connect with wifi,
now please give any kind of file to fix this problem, how i get back device in ON condition? remember bootloader is locked
and i have no info of old version etc
Mr Hassan said:
hello ,
how r u team,
huawei nxt-al10 in huawei activation mode, i decide to downgrade, and after that, device stuck on recovery mode,
and need to connect with wifi for fix recovery, i connected and update, but after update device still same, and even no more touch working, so i,m no longer to connect with wifi,
now please give any kind of file to fix this problem, how i get back device in ON condition? remember bootloader is locked
and i have no info of old version etc
Click to expand...
Click to collapse
It may not be as simple as one file.
You need to flash stock AL10 recovery.img.
Then you need to put the update.app from correct region AL10 stock firmware on your sd card. Switch off your phone.
Then hold power, volume up and volume down at the same time. Your phone should automatically update. If you get failed to update message, eg, it goes to 5% then fails, it means you have the wrong firmware. You have to keep on trying stock AL10 firmwares until success. Start with the right region first, like the region your in and then go from there.
Check somboons threads. Read the posts regarding your firmware. Also check SRK tool lod Chong version, also from somboons. That might be very helpful.
Sent from my L29
ubermorgan said:
It may not be as simple as one file.
You need to flash stock AL10 recovery.img.
L29
Click to expand...
Click to collapse
1st thanks for showing interest in my Q, its china model, and i think one stock latest file have the recovery img etc,
can you provide me the china latest file link for this model?
i mean its china region
Mr Hassan said:
1st thanks for showing interest in my Q, its china model, and i think one stock latest file have the recovery img etc,
can you provide me the china latest file link for this model?
i mean its china region
Click to expand...
Click to collapse
Sorry for late reply. What firmware did you have before downgrade?
Either way, you may not be able to use a recent firmware. Your best option is to find the same firmware you had when you got your phone, follow the instructions I gave you in earlier reply. Once your phone is working, you may have to manually update your firmware. Don't just use system update because that can create a lot of problems for your device. Just keep reading the somboons posts because there very helpful.
Sent from my L29
ubermorgan said:
Sorry for late reply. What firmware did you have before downgrade?
Either way, you may not be able to use a recent firmware. Your best option is to find the same firmware you had when you got your phone, follow the instructions I gave you in earlier reply. Once your phone is working, you may have to manually update your firmware. Don't just use system update because that can create a lot of problems for your device. Just keep reading the somboons posts because there very helpful.
Sent from my L29
Click to expand...
Click to collapse
its ok bro, now my problem done,
Mr Hassan said:
its ok bro, now my problem done,
Click to expand...
Click to collapse
Can I ask how you fixed it?
Sent from my L29
ubermorgan said:
Can I ask how you fixed it?
Sent from my L29
Click to expand...
Click to collapse
yes, someone give me the correct file, my god bless him
Related
hello
i unlocked bootloader and rooted my p8lite, twrp is installed. im on 6.0 marshmallow and want to downgrade to 170, when i bought it it was on 171,but i want dual sim. the problem is how to unroot it and install stock recovery,than install b300. i tried already but it said no update.app found. what could be the problem. i had supersu on my homescreen could not delete it after unroot. i searched all xda and google for it but cant figure out what to do next. i realy need this badly to do,because i cant open anything on my phone its like a tablet. if anyone can help me wth steps to try. i will try again to unroot,install stock recovery nad try again to force update b300 "UPDATE.APP".
can i install 170 on b300 or it must go, b300-b190-b170 and than b534 6.0?
pls help and thanks
Make sure the name is "update.app" and not "UPDATE.APP" for me b170 worked just fine after that last night.
Also b300 does not visibly change anything. And install the b170 from the dload by boothing the phone while holding all the three buttons on the right side and release when you see huawei logo.
you need to flash stock recovery. Then flash v052 via fastboot commands. (info and links you can find here on xda). Then you can do upgrade through EMUI updater (by local update files) - info about upgrade to dual sim you can find here, on xda, again). Those are my steps, tried few times. Good luck.
Probably you need unroot the phone.
i fixed it. thanks anyways.
Krchkovv said:
i fixed it. thanks anyways.
Click to expand...
Click to collapse
but how???
i have the same problem can you tell me how
$Reaper_84 said:
but how???
i have the same problem can you tell me how
Click to expand...
Click to collapse
i don't have the phone anymore and i cant remember how i did it.sry bro, but use adb to flash stock rom and from there on to MM. try to find in what order to flash versions and update.
Krchkovv said:
i don't have the phone anymore and i cant remember how i did it.sry bro, but use adb to flash stock rom and from there on to MM. try to find in what order to flash versions and update.
Click to expand...
Click to collapse
https://forum.xda-developers.com/p8lite/help/solved-problem-downgrade-huawei-p8-lite-t3649238 Here You Go
RootingPro-18 said:
https://forum.xda-developers.com/p8lite/help/solved-problem-downgrade-huawei-p8-lite-t3649238 Here You Go
Click to expand...
Click to collapse
Nice thanks
$Reaper_84 said:
but how???
i have the same problem can you tell me how
Click to expand...
Click to collapse
Hope this helps, nice of him to share it.
Hello XDA!
My current build number is C636B170 and i want to install C432B550 Marshmallow update. I tried the "Local Update" option but it fails everytime.
The ROM Flashing option in HiSuite, can i install the update with that option? I would be happy if someone gave me an answer for my problem.
Thanks
You can't, either you wait for an official update for your Custc or you change your Custc (c636) to (c432) by
First: unlocking your bootloader
Second: download (c432b052) firmware and flash it.
Then download the b170 and local update it then you can download and update to b550
All the tutorial can be found in xda by little search
ya.husein said:
You can't, either you wait for an official update for your Custc or you change your Custc (c636) to (c432) by
First: unlocking your bootloader
Second: download (c432b052) firmware and flash it.
Then download the b170 and local update it then you can download and update to b550
All the tutorial can be found in xda by little search
Click to expand...
Click to collapse
Ok. Thanks. I will try that out.
Unlocking bootloader means only my warranty is void, yes?
And after is there anything else i should know before doing so?
De EmperoR said:
Ok. Thanks. I will try that out.
Unlocking bootloader means only my warranty is void, yes?
And after is there anything else i should know before doing so?
Click to expand...
Click to collapse
Yeah exactly. And don't forget to do a backup before starting, Good luck.
ya.husein said:
Yeah exactly. And don't forget to do a backup before starting, Good luck.
Click to expand...
Click to collapse
You have been a good help for me till now. Can you please help me with this too?
I flashed a ROM which is based to C432B052 but it kinda made my sim unusable for that ROM. And i was unable to local update either.
I want to know
1. A site where i can download official firmware for my phone
2. How to properly install it with fastboot (i can do it but i feel like i am missing something very important)
Thanks
De EmperoR said:
You have been a good help for me till now. Can you please help me with this too?
I flashed a ROM which is based to C432B052 but it kinda made my sim unusable for that ROM. And i was unable to local update either.
I want to know
1. A site where i can download official firmware for my phone
2. How to properly install it with fastboot (i can do it but i feel like i am missing something very important)
Thanks
Click to expand...
Click to collapse
you may lose your imei after flashing b052 but you will be able to restore it after updating to b170
btw your phone is dual sim or single sim ? from the build number you gave before it should be a dual sim, if it is then continue.
after flashing b052 download b170 and extract it then take the update.app and make a folder in the root of your device named (dload) and put it there. you should find the update in the local update.
here is: http://huaweidevices.ru/huawei-p8-lite-ale-l21.html
**
flashing b052
this might help you http://tundevs.blogspot.com/p/huawei-p8-marshmallow.html
ya.husein said:
you may lose your imei after flashing b052 but you will be able to restore it after updating to b170
btw your phone is dual sim or single sim ? from the build number you gave before it should be a dual sim, if it is then continue.
after flashing b052 download b170 and extract it then take the update.app and make a folder in the root of your device named (dload) and put it there. you should find the update in the local update.
here is: http://huaweidevices.ru/huawei-p8-lite-ale-l21.html
**
flashing b052
this might help you http://tundevs.blogspot.com/p/huawei-p8-marshmallow.html
Click to expand...
Click to collapse
Thank you so much. This explains why i couldn't make phone calls. I will try this too and see.
Again thank you so so much
ya.husein said:
btw your phone is dual sim or single sim ?
Click to expand...
Click to collapse
Mine is dual sim
Thank you so so so much ya.husein. I have successfully installed the b550 updat thanks to you!
Again thank you so much dude
De EmperoR said:
Thank you so so so much ya.husein. I have successfully installed the b550 updat thanks to you!
Again thank you so much dude
Click to expand...
Click to collapse
Happy to hear that, you're welcome
Sent from my ALE-L21 using XDA-Developers mobile app
when the LinageOS version on the Chinese model guys?((
If you manage to get for us the N files needed or someone who has the Nougat files , we can work something out. Otherwise till Chinese variant release the Full N Update.
DrakenFX said:
If you manage to get for us the N files needed or someone who has the Nougat files , we can work something out. Otherwise till Chinese variant release the Full N Update.
Click to expand...
Click to collapse
uhm, there are some builds based around the old tree, that should work.
https://forum.xda-developers.com/axon-7/development/rom-nello-t3495844
http://www.cyanogenmods.org/forums/topic/zte-axon-7-lineage-14-1-nougat-7-1-rom/
MaxRink said:
uhm, there are some builds based around the old tree, that should work.
https://forum.xda-developers.com/axon-7/development/rom-nello-t3495844
http://www.cyanogenmods.org/forums/topic/zte-axon-7-lineage-14-1-nougat-7-1-rom/
Click to expand...
Click to collapse
NOPE, all those trees are base in MM sources ... @Unjustified Dev lineage. Is base in FULL N
DrakenFX said:
NOPE, all those trees are base in MM sources ... @Unjustified Dev lineage. Is base in FULL N
Click to expand...
Click to collapse
Uhm, thats exactly what i wrote.
nevertheless they do work on the A2017 right now but are by far not as bugfree as UJDs N-tree-based build
hi,guys.This is my extract the files of N.
http://pan.baidu.com/s/1mhVJs9a
http://pan.baidu.com/s/1mhVJs9a
It's the complete N upgrade package, I hope to help you.
http://pan.baidu.com/s/1hrFC2hA
http://pan.baidu.com/s/1hrFC2hA
Perhaps download speed is slow, I hope you can have a way.
Thank you for your work.
DrakenFX said:
If you manage to get for us the N files needed or someone who has the Nougat files , we can work something out. Otherwise till Chinese variant release the Full N Update.
Click to expand...
Click to collapse
hi,guys.This is my extract the files of N.
http://pan.baidu.com/s/1mhVJs9a
http://pan.baidu.com/s/1mhVJs9a
It's the complete N upgrade package, I hope to help you.
http://pan.baidu.com/s/1hrFC2hA
http://pan.baidu.com/s/1hrFC2hA
Perhaps download speed is slow, I hope you can have a way.
Thank you for your work.
DrakenFX said:
If you manage to get for us the N files needed or someone who has the Nougat files , we can work something out. Otherwise till Chinese variant release the Full N Update.
Click to expand...
Click to collapse
I upload N updates to Google cloud disk.
https://drive.google.com/file/d/0B3DK6lUODGKeUHlhWGFocDRXcm8/view?usp=sharing
savior333 said:
I upload N updates to Google cloud disk.
https://drive.google.com/file/d/0B3DK6lUODGKeUHlhWGFocDRXcm8/view?usp=sharing
Click to expand...
Click to collapse
:good: Thank you, will look into it :good:
Out of curiosity, is this the official N update?
ultramag69 said:
Out of curiosity, is this the official N update?
Click to expand...
Click to collapse
from what i can see, this is probably the OTA use to update from MM to N in the chinese variant. so meaning you must be in the software require to be able to update from MM to N using this file.
still there is a few partitions i'll need to create a Stack for the Chinese variant, cuz here in this zip they are in a form of Patch and not full.
Can someone port this for TWRP for chinese version?
DrakenFX said:
from what i can see, this is probably the OTA use to update from MM to N in the chinese variant. so meaning you must be in the software require to be able to update from MM to N using this file.
still there is a few partitions i'll need to create a Stack for the Chinese variant, cuz here in this zip they are in a form of Patch and not full.
Click to expand...
Click to collapse
Yep, I'm on B13 (A2017) so thought I'd give it a shot...
I'll let you know if I was successfulor not....
Apparently not the upgrade from B13 (MM) as it isn't detected as an upgrade file by my Chinese A2017...
DrakenFX said:
from what i can see, this is probably the OTA use to update from MM to N in the chinese variant. so meaning you must be in the software require to be able to update from MM to N using this file.
still there is a few partitions i'll need to create a Stack for the Chinese variant, cuz here in this zip they are in a form of Patch and not full.
Click to expand...
Click to collapse
Hi,This would be useful.It is aosp N with base function from zte.
https://drive.google.com/file/d/0B3DK6lUODGKeREhEdDk0R2xTQTQ/view?usp=sharing
savior333 said:
Hi,This would be useful.It is aosp N with base function from zte.
...
Click to expand...
Click to collapse
Could I ask you some questions please?
I installed this package and this seemed to change something in the bootloader. I can boot up, use my device with no bugs. But I can't enter bootloader.
Trying to flash twrp recovery from EDL caused me a soft brick. After that I can't even enter recovery.
Then I managed to flash the recovery.img, extracted from your pakage.
Now I want to go back the stock Zte 6.0 rom. But the recovery cant flash the update.zip, which I got from zte china website. It said that my device had a blank "ro.product.device". Trying the DrakenFx system zip failed the verification.
Could you please guide me how to go back? This rom has root app but press Root button does nothing. And I cant enable OEM unlock under Developer Option.
Thank you in advance.
ultramag69 said:
Out of curiosity, is this the official N update?
Click to expand...
Click to collapse
probably a BETA I don't think official N is out yet
quanlop93 said:
Could I ask you some questions please?
I installed this package and this seemed to change something in the bootloader. I can boot up, use my device with no bugs. But I can't enter bootloader.
Trying to flash twrp recovery from EDL caused me a soft brick. After that I can't even enter recovery.
Then I managed to flash the recovery.img, extracted from your pakage.
Now I want to go back the stock Zte 6.0 rom. But the recovery cant flash the update.zip, which I got from zte china website. It said that my device had a blank "ro.product.device". Trying the DrakenFx system zip failed the verification.
Could you please guide me how to go back? This rom has root app but press Root button does nothing. And I cant enable OEM unlock under Developer Option.
Thank you in advance.
Click to expand...
Click to collapse
1. Why did you installed this package?
2. Did you have the device for this package?
3. Did someone told you was OK to flash this package?
4. Which variant to you use.
@savior333
Got the file, I'll check today and see if N stack can be done for LineageOS. Thanks again
DrakenFX said:
1. Why did you installed this package?
2. Did you have the device for this package?
3. Did someone told you was OK to flash this package?
4. Which variant to you use.
...
Click to expand...
Click to collapse
1. I just cant stand the Mifavor anymore so I take the risk and install it.
3. Nobody told me it was OK to flash it. But in the end my device boot up and run flawlessly.
2. and 4. I have the A2017 4G/64Gb Chinese variant.
Curiosity cant kill my device but it leaves me no way back.....
Ps: As I looked into the build.prop inside the official A2017 B11 package and this pakage, I saw the stock has "ro.product.name=P996A03" while the N pakage has "ro.product.name=P996A03_N"
quanlop93 said:
Could I ask you some questions please?
I installed this package and this seemed to change something in the bootloader. I can boot up, use my device with no bugs. But I can't enter bootloader.
Trying to flash twrp recovery from EDL caused me a soft brick. After that I can't even enter recovery.
Then I managed to flash the recovery.img, extracted from your pakage.
Now I want to go back the stock Zte 6.0 rom. But the recovery cant flash the update.zip, which I got from zte china website. It said that my device had a blank "ro.product.device". Trying the DrakenFx system zip failed the verification.
Could you please guide me how to go back? This rom has root app but press Root button does nothing. And I cant enable OEM unlock under Developer Option.
Thank you in advance.
Click to expand...
Click to collapse
sorry,you should not flash this rom.if you want back,need a special package.wait for me upload.
savior333 said:
sorry,you should not flash this rom.if you want back,need a special package.wait for me upload.
Click to expand...
Click to collapse
Thank you very much. I thought I have to live with this forever and you save me.
Hey I bought an Axon 7 A2017 from China and I just figured out that it doesn't have OTA updates because the buyer installed a multi-language OS that prevents OTA .Please I want to know how to enable ota or a way to update manually to the latest android Nougat . Can you please give me a simple method because I'm a real noob in flashing and unlocking smartphones. I want only to update the stock OS to the latest android version and then root the smartphone in order to install some root required apps.
Thanks Folks.
Any help please ?
Youssefmans said:
Any help please ?
Click to expand...
Click to collapse
I don't have the chinese version, but you have to unlock the bootloader and install TWRP, then you'll be able to install the stock ROM. Try to use bkores's axon7toolkit
Also try searching for this (in Q&A), I'm 100% sure this has been asked at least twice before. You could've gotten an answer much sooner if you had tried to find an old post that asks the same
Choose an username... said:
I don't have the chinese version, but you have to unlock the bootloader and install TWRP, then you'll be able to install the stock ROM. Try to use bkores's axon7toolkit
Also try searching for this (in Q&A), I'm 100% sure this has been asked at least twice before. You could've gotten an answer much sooner if you had tried to find an old post that asks the same
Click to expand...
Click to collapse
Thanks buddy , I will try to find something , but the problem is that most of guides are for the us version
Youssefmans said:
Thanks buddy , I will try to find something , but the problem is that most of guides are for the us version
Click to expand...
Click to collapse
Not guides, just people who asked this already. This is really common.
Or you can just go the easy way and try using the axon7toolkit, it will ask you what model it is, and you can put A2017
Choose an username... said:
Not guides, just people who asked this already. This is really common.
Or you can just go the easy way and try using the axon7toolkit, it will ask you what model it is, and you can put A2017
Click to expand...
Click to collapse
Thanks a lot my friend , please which update I have to flash in order to have ota enabled ?
Youssefmans said:
Thanks a lot my friend , please which update I have to flash in order to have ota enabled ?
Click to expand...
Click to collapse
Any update. you can even get the newest update
Choose an username... said:
Any update. you can even get the newest update
Click to expand...
Click to collapse
Thanks my friend for sharing this information.
process is the zip file for b013. unzip and place on root of an SD card. Then trigger system update via system updates in settings. Phone will detect the file. then it's a domino effect after that of updates. Current one is 7.1.1
front firing speakers said:
process is the zip file for b013. unzip and place on root of an SD card. Then trigger system update via system updates in settings. Phone will detect the file. then it's a domino effect after that of updates. Current one is 7.1.1
Click to expand...
Click to collapse
Thanks buddy , I'm on B07 can I update directly to B013 and then unlock the bootloader and root the phone ?? if yes , Will the OTA appear automatically to the latest firmware available ?
Youssefmans said:
Thanks buddy , I'm on B07 can I update directly to B013 and then unlock the bootloader and root the phone ?? if yes , Will the OTA appear automatically to the latest firmware available ?
Click to expand...
Click to collapse
Just update to B13, it doesn't matter if the latest OTA doesn't appear, you'll probably need to install more than one OTA. Also, if you'll do it this way don't unlock the phone until you get the latest version.
Choose an username... said:
Just update to B13, it doesn't matter if the latest OTA doesn't appear, you'll probably need to install more than one OTA. Also, if you'll do it this way don't unlock the phone until you get the latest version.
Click to expand...
Click to collapse
Thanks , but I heard that it's difficult to unlock bootloader on Nougat .
Youssefmans said:
Thanks , but I heard that it's difficult to unlock bootloader on Nougat .
Click to expand...
Click to collapse
Is it, @bkores?
Sorry for the trouble, I just don't know if it really does chanve anything tbh
Choose an username... said:
Is it, @bkores?
Sorry for the trouble, I just don't know if it really does changes anything tbh
Click to expand...
Click to collapse
Nope
Youssefmans said:
Thanks , but I heard that it's difficult to unlock bootloader on Nougat .
Click to expand...
Click to collapse
Just update and use axon7toolkit then
---------- Post added at 04:52 AM ---------- Previous post was at 04:52 AM ----------
bkores said:
Nope
Click to expand...
Click to collapse
:good:
Choose an username... said:
Just update and use axon7toolkit then
---------- Post added at 04:52 AM ---------- Previous post was at 04:52 AM ----------
:good:
Click to expand...
Click to collapse
Thanks , I will use the toolkit
I bought a used Axon 7 A2017. It already has TWRP on and the model number is reported as ZTE A2017 in "About phone".
Currently it's on Android 6.0.1 and I can't update from the settings menu. How do I update to latest Android?
not sure, I'm not a rooting man. I need my phone to be stock. certain apps do not run if you root a phone
alxla said:
I bought a used Axon 7 A2017. It already has TWRP on and the model number is reported as ZTE A2017 in "About phone".
Currently it's on Android 6.0.1 and I can't update from the settings menu. How do I update to latest Android?
Click to expand...
Click to collapse
You can use a flashable system zip and use it on TWRP, I think DrakenFX made some for the A2017. Otherwise you need to flash the a2017 stock recovery on it (with a flashable zip like tron1's or drakenfx's) and then use the update feature on the phone.
HI,
I have a p10-lite dual sim WAS-LX1A.
I am currently on build WAS-LX1AC185B120, that firmware is from middle east region. I have Twrp installed and Rooted.
But now i want to get back to the stock so i can get official OTA Updates, BUT I am unable to find that firmware on internet, instead
i got one on firmware finder app which is WAS-LX1AC185B174, this firmware is also from middle east but its updated, so i was just asking Can I extract recovery from this New version firmware (B174) and flash it on older firmware (B120). Is there any chance? if yes then what is the appropriate process for this? and also will the phone be unrooted or not?
Your replies are most welcome.
thank you.
(Sorry for Bad English).
You can extract any recovery with HuaweiiUpdateExtractor from any FULL-OTA
I too have the lx1a and just managed to flash stock. I tried numerous filmware files using filmware finder but none worked for me. In the link below is where I got the filmware that worked first time I used the WAS-L21A and everything is working great!
https://forum.xda-developers.com/p10-lite/help/original-service-rom-huawei-p10-lite-t3688097
Forgot to say, on the first boot it booted to erecoveey and said something is badly damaged! However I just rebooted and it booted fine.
stonedpsycho said:
I too have the lx1a and just managed to flash stock. I tried numerous filmware files using filmware finder but none worked for me. In the link below is where I got the filmware that worked first time I used the WAS-L21A and everything is working great!
https://forum.xda-developers.com/p10-lite/help/original-service-rom-huawei-p10-lite-t3688097
Forgot to say, on the first boot it booted to erecoveey and said something is badly damaged! However I just rebooted and it booted fine.
Click to expand...
Click to collapse
Hmm thanks. What you did? Did you flashed complete firmware or just the recovery.img file?
Sohail Wazir said:
Hmm thanks. What you did? Did you flashed complete firmware or just the recovery.img file?
Click to expand...
Click to collapse
You need stock recovery to be able to flash stock filmware.
Just do what Harlock1978 said then flash the recovery via adb, then you can flash the stock filmware.
PM me if you need any more help.
stonedpsycho said:
You need stock recovery to be able to flash stock filmware.
Just do what Harlock1978 said then flash the recovery via adb, then you can flash the stock filmware.
PM me if you need any more help.
Click to expand...
Click to collapse
I saw somewhere people using recovery. Img system. Img boot. Img and cust. Img... What should i do i mean flashing only recovery. Img works? And do i need other files too or not?
Sohail Wazir said:
I saw somewhere people using recovery. Img system. Img boot. Img and cust. Img... What should i do i mean flashing only recovery. Img works? And do i need other files too or not?
Click to expand...
Click to collapse
Maybe that can work? I can only tell you what worked for me.
All you need is stock recovery flashed and the download from the link above.
In the download copy the 'dload' folder to the root of your sd card. Then just force update and it should flash the stock filmware.
Extract stock recovery flash it via fastboot and use Service rom on link already mentioned and dload method with three buttons for full recovery. On that way your phone will be locked, unrooted, updated, brand new same as from store ?
stonedpsycho said:
Maybe that can work? I can only tell you what worked for me.
All you need is stock recovery flashed and the download from the link above.
In the download copy the 'dload' folder to the root of your sd card. Then just force update and it should flash the stock filmware.
Click to expand...
Click to collapse
Ok. Thanks sir. I will give it a try...
Alexxxx1 said:
Extract stock recovery flash it via fastboot and use Service rom on link already mentioned and dload method with three buttons for full recovery. On that way your phone will be locked, unrooted, updated, brand new same as from store ?
Click to expand...
Click to collapse
Sir! On the download page of tge rom you mentioned i found one middle eastern version but there were some countries mentioned except Pakistan. So as i am from Pakistan can i use that firmware.. Actually Pakistan is also in Middle East. But they didn't mention on the download page! Using that rom is safe or not? Kindly assist me..
Thank You
Sohail Wazir said:
Sir! On the download page of tge rom you mentioned i found one middle eastern version but there were some countries mentioned except Pakistan. So as i am from Pakistan can i use that firmware.. Actually Pakistan is also in Middle East. But they didn't mention on the download page! Using that rom is safe or not? Kindly assist me..
Thank You
Click to expand...
Click to collapse
If you have the same version which is listed in service roms, absolutely it doesn't important place where you live. I suppose it's version was lx1(a)C185 for middle east and all files for c185 are is suitable for your Country too. I mean oeminfo and sevice rom with mark c185.
Regards
Alexxxx1 said:
If you have the same version which is listed in service roms, absolutely it doesn't important place where you live. I suppose it's version was lx1(a)C185 for middle east and all files for c185 are is suitable for your Country too. I mean oeminfo and sevice rom with mark c185.
Regards
Click to expand...
Click to collapse
Thank you so much for your assistance.
Sohail Wazir said:
HI,
I have a p10-lite dual sim WAS-LX1A.
I am currently on build WAS-LX1AC185B120, that firmware is from middle east region. I have Twrp installed and Rooted.
But now i want to get back to the stock so i can get official OTA Updates, BUT I am unable to find that firmware on internet, instead
i got one on firmware finder app which is WAS-LX1AC185B174, this firmware is also from middle east but its updated, so i was just asking Can I extract recovery from this New version firmware (B174) and flash it on older firmware (B120). Is there any chance? if yes then what is the appropriate process for this? and also will the phone be unrooted or not?
Your replies are most welcome.
thank you.
(Sorry for Bad English).
Click to expand...
Click to collapse
I could help you if didn't find any solution ! Because i had the same problem and I "fixed" it!
Step by step video to fix your bricked P10 Lite
This video is made to help everyone to successfully fix your Bricked Huawei P10 Lite
Few months Before I bricked my Huawei P10 Lite and searched a lot of sites and blogs , and finally fixed my BRICKED MOBILE .
Follow the below youtube video link clearly to unbrick your Huawei
https://youtu.be/0vDgDXePAR4
Cheers.....
Alexxxx1 said:
Extract stock recovery flash it via fastboot and use Service rom on link already mentioned and dload method with three buttons for full recovery. On that way your phone will be locked, unrooted, updated, brand new same as from store ?
Click to expand...
Click to collapse
Sir can you explain dload with three buttons method?
Oeminfo bricked?
Hi, I have bricked my phone. I can flash a ROM as an example no I have flashed the Elite ROM v7.7 but the oeminfo is bricked. Because the build number says: elemental als the IMEI numbers are missing so it looks strange. My problem is I do not know my build number and I have no backup. So I know that my phone is a WAS-LX1 with 32GB ROM and 3GB RAM. And I am from Europe/Austria.
Can I use that Files here to fix the phone?
many thanks