New update last night. Security patch to January 2018. Still 7.1.1. Camera update. Quick install, no issues so far. I'm not rooted so no idea on impacts to root.
r_r
RedsonRising said:
New update last night. Security patch to January 2018. Still 7.1.1. Camera update. Quick install, no issues so far. I'm not rooted so no idea on impacts to root.
r_r
Click to expand...
Click to collapse
It has a new bootloader which will block the ability to odin flash images from other carriers or the unlocked images on the US devices. So no more Verizon version using the unlocked firmware.
https://www.xda-developers.com/samsung-galaxy-s8-note8-bootloader-odin/
Has anyone been able to pull a Verizon ODIN file for the Note 8 from SamFirm??? I can't get any SM-N950U file with a VZW region.
Im curious too. If I flash the BRA8 from the BRA5 (which I'm on) will I have network issues. I believe the BRA8 is for ATT/TMO no?
I can't decide if I should update at the risk of losing out on being able to try the Unlocked firmware for my phone. hmmm
I just tried to odin the BRA8 so that I could apply the Oreo update and it Odin'd fine but it got to 32 percent on the phone during reboot and gave me an error code. Tried to Odin again and the same result. Rebooted phone just fine though.
Update: decided to install the update.zip and it worked. Oreo works great.
dr_w said:
I just tried to odin the BRA8 so that I could apply the Oreo update and it Odin'd fine but it got to 32 percent on the phone during reboot and gave me an error code. Tried to Odin again and the same result. Rebooted phone just fine though.
Update: decided to install the update.zip and it worked. Oreo works great.
Click to expand...
Click to collapse
was this from the u1 BRA8 or from the ATT one? interested to try getting OREO
avengethis1 said:
was this from the u1 BRA8 or from the ATT one? interested to try getting OREO
Click to expand...
Click to collapse
It was from here. https://www.xda-developers.com/samsung-galaxy-s8-note8-android-oreo-february-security-patches/
Only select BL, AP, CP. I did get an error during reboot but everything seems fine. Then I installed the update.
Update 2: life focus is very choppy and slow. Strange because the rest of the phone feels buttery smooth.
Sent from my SM-N950U using Tapatalk
dr_w said:
It was from here. https://www.xda-developers.com/samsung-galaxy-s8-note8-android-oreo-february-security-patches/
Only select BL, AP, CP. I did get an error during reboot but everything seems fine. Then I installed the update.
Update 2: life focus is very choppy and slow. Strange because the rest of the phone feels buttery smooth.
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
Thanks, I'm going to try it tonight
Sent from my SM-N950U using Tapatalk
Any updates? I tried to Odin the BRA8 and got a fail as well. Then tried to install the update and got a fail there too. If you have had success...let us know. Thanks!
MassScrew said:
Thanks, I'm going to try it tonight
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
raejr78 said:
Any updates? I tried to Odin the BRA8 and got a fail as well. Then tried to install the update and got a fail there too. If you have had success...let us know. Thanks!
Click to expand...
Click to collapse
I updated on Monday afternoon. It went without a hitch. My phone DID NOT reset all data, I do not know if I got lucky or what.
I just followed the instructions and put the update on my card.
Everything is working good. Sometimes i get a message that some app like the phone may not work due to compatibility issues but they always work.
I am looking forward to the release because I really like some of the changes.
Peace
MassScrew said:
I updated on Monday afternoon. It went without a hitch. My phone DID NOT reset all data, I do not know if I got lucky or what.
I just followed the instructions and put the update on my card.
Everything is working good. Sometimes i get a message that some app like the phone may not work due to compatibility issues but they always work.
I am looking forward to the release because I really like some of the changes.
Peace
Click to expand...
Click to collapse
We're you on the BRA5 build?
I installed the 3BRA5 VZW ROM via Odin then Odin'ed the 3BRA8 AP, BL & CP files without reboot & installed update.zip via recovery. Now MMS texts won't send.
Anyone else have this problem??
I took the OTA from verizon then I tried this Update to Oreo.
did you do the cscs file? If I remember correctly there were 4 files to flash.
/
I got it to work for me. I downloaded the newest version of Odin v3.12.7 and started the installation of the BRA8 software. It did the installation up to 32% and failed. I then applied the update.zip and it went through with no problems. We'll see how she goes from here on out.
MassScrew said:
I took the OTA from verizon then I tried this Update to Oreo.
did you do the cscs file? If I remember correctly there were 4 files to flash.
/
Click to expand...
Click to collapse
None of my phone was reset either which was kind of nice. No need to do a factory reset if you dont want to. Again, my steps:
ONLY select BL, AP, CP. I did get an error during reboot around 32% but everything seems fine upon start up. Then I reboot into recovery and installed the update from the SD card. Everything is great with the exception of live focus...little choppy.
I did all 4 files from the BRA8 firmware. It tried to install and got to 32% before fail. My phone actually booted directly into recovery mode and I selected the update.zip file. It took a little while to process, but when the phone rebooted...BANK!!! So far so good. Haven't checked out live focus yet.
FYI: I did a factory data reset this morning and now the phone seems to be running much smoother. It also seemed to be draining the battery a bit faster after the upgrade. Since the reset it seems to be better now. I'll keep you posted in case anything crazy/weird happens...but so far so good.
Newer Version CRB3
Someone posted that there was a newer version of this firmware over at samsung.firmware.science. It is build CRB3. If you try to simply flash the update.zip it will fail. You will need to use the BRA8 files (BL, AP, CP, CSC) to downgrade. Here are my steps for those interested: 1)download CRB3 firmware and put it on your SD card, 2)use odin to downgrade to BRA8 (I used Odin 3.12.7), 3)get the 32% installation failure on the blue screen, 4)wait...the phone will boot into the recovery mode, 5)use the menu to install update.zip from sd card, 6)wait til it finishes and BANK!!! I'm on the newer version as we speak. Not sure of the differences yet, but some have reported linking to android wear devices was sketchy on CRB1 but not so much on this build. Give it a whirl!!!
My Verizon Nte 8 is showing N950USQU3CRB5. Works great. No more rooting for me.
Related
Hi, I started a thread needing help with my wifi but it has developed into not even being able to boot at all; it stops at the galaxy logo and either freezes or keeps booting. I have gone to the Odin page with all the different things to do and flashed the file to get back to the original rom but that is really where the trouble began. right now the only thing I can do with my phone is get into download mode, I can't even get into recovery. I have flashed a pit file that worked the first time but I don't know if that is part of the problem or not. Can someone please give me some directions, thanks
Also the phone won't boot at all unless hooked up to a power supply, the battery alone doesn't do anything.
nate39 said:
Hi, I started a thread needing help with my wifi but it has developed into not even being able to boot at all; it stops at the galaxy logo and either freezes or keeps booting. I have gone to the Odin page with all the different things to do and flashed the file to get back to the original rom but that is really where the trouble began. right now the only thing I can do with my phone is get into download mode, I can't even get into recovery. I have flashed a pit file that worked the first time but I don't know if that is part of the problem or not. Can someone please give me some directions, thanks
Click to expand...
Click to collapse
More info is needed. What firmware / bootloader are you on? Was it rooted? Did you have a custom recovery installed? What version of ODIN are you using?
StoneyJSG said:
More info is needed. Which GS3 do you have? What firmware / bootloader are you on? Was it rooted? Did you have a custom recovery installed? What version of ODIN are you using?
Right now, it sounds like you might need to use enewman17's ODIN debrick file.
Click to expand...
Click to collapse
It is the AT&T s4. To be honest I don't know what firmware I am on, it is the one the Odin page said to use if you want to go back to stock. I never rooted it. The bootloader would be whatever the latest update was for this phone. I can't get into it to tell you anymore. I am using ODIN 10, the latest one. thanks
Well I finally got into recovery and did a factory reset, now it boots into the AT&T white splash screen before it just turns off. I am also wondering if my battery just died for some reason?
nate39 said:
It is the AT&T s4. To be honest I don't know what firmware I am on, it is the one the Odin page said to use if you want to go back to stock. I never rooted it. The bootloader would be whatever the latest update was for this phone. I can't get into it to tell you anymore. I am using ODIN 10, the latest one. thanks
Click to expand...
Click to collapse
ODIN 10? Try using ODIN 3.09 and see if that helps. The latest update would be Android 4.4.4 NJ4 firmware. This link should help you, it will give you root with safe strap recovery though: http://forum.xda-developers.com/galaxy-s4-att/general/guide-odin-to-stock-updating-rooting-t2926642
I meant 3.10, I will try the older version. What file should I flash?
nate39 said:
I meant 3.10, I will try the older version. What file should I flash?
Click to expand...
Click to collapse
Check out the link I posted in my last post. It should help you get your phone fixed.
I have been there. I went to the very last option which seems to be what I need unless I am missing something.
Neither odin 3.09 or 3.10 will even flash any file now. it either says invalid md5 or fails when it attempts it.
Well, I finally got it to boot into android but it is flaky at best. It is android 4.3 instead of 4.4 where it was initially. The wifi still doesn't work and now the keyboard keeps crashing everytime I do something. The build is jss15j1337ucuemk2 which I know is older than I had before. Does this give anyone a better idea of what I need to do? If I can get a stable flash then can I flash a modem file to fix the wifi? I really need some direction, thanks
Turns out the battery was completely drained which was causing some of the boot problems, I don't now how that happened but I am charging it now.
Well after using odin 3.8* I got it to install some older firmware ending in mk2 rather than the nc1 or nf4 that I had before the trouble. After I got it to boot, I went back into download mode and flashed the modem file and now everything works execpt I had to force stop Samsung keyboard and use swype. I would like to upgrade my firmware but since for a couple of more weeks it won't have a sim card I can't upgrade OTA. For some reason Kies says that firmware upgrade and initialization isn't supported with this model which makes no sense to me. It also says my firmware is up to date
Does anyone know how to flash to the latest firmware without me going through this nightmare again? thanks
nate39 said:
Well after using odin 3.8* I got it to install some older firmware ending in mk2 rather than the nc1 or nf4 that I had before the trouble. After I got it to boot, I went back into download mode and flashed the modem file and now everything works execpt I had to force stop Samsung keyboard and use swype. I would like to upgrade my firmware but since for a couple of more weeks it won't have a sim card I can't upgrade OTA. For some reason Kies says that firmware upgrade and initialization isn't supported with this model which makes no sense to me. It also says my firmware is up to date
Does anyone know how to flash to the latest firmware without me going through this nightmare again? thanks
Click to expand...
Click to collapse
If I were in your shoes I'd flash the nb1 tar file in Odin, any vein should work. See this for the tar file http://forum.xda-developers.com/showthread.php?p=56453100. You can then ota to the latest firmware which is 4.4.4, nj4
Sent from my Nexus 9 using XDA Free mobile app
thanks, and as far as you know this doesn't mess wifi up?
nate39 said:
thanks, and as far as you know this doesn't mess wife up?
Click to expand...
Click to collapse
I assume you ment WiFi and not wife? Can't help you with the wife but Wi-Fi should work fine
Sent from my Nexus 9 using XDA Free mobile app
nate39 said:
Well after using odin 3.8* I got it to install some older firmware ending in mk2 rather than the nc1 or nf4 that I had before the trouble. After I got it to boot, I went back into download mode and flashed the modem file and now everything works execpt I had to force stop Samsung keyboard and use swype. I would like to upgrade my firmware but since for a couple of more weeks it won't have a sim card I can't upgrade OTA. For some reason Kies says that firmware upgrade and initialization isn't supported with this model which makes no sense to me. It also says my firmware is up to date
Does anyone know how to flash to the latest firmware without me going through this nightmare again? thanks
Click to expand...
Click to collapse
Download a firmaware for your region from sammobile and flash it via odin 3.10. It will solve most of your problems
Muthumbi said:
Download a firmaware for your region from sammobile and flash it via odin 3.10. It will solve most of your problems
Click to expand...
Click to collapse
Sammobile isn't going to have anything for the i337 unless you're on mdl
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
Sammobile isn't going to have anything for the i337 unless you're on mdl
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
I agree. But google has basically all he needs. More so rapidgator
I haven't found anything from Samsung to download. If I flash a newer build, do I also need to flash a modem file and a bootloader or can I just flash the PDA? thanks for explaining this to me.
And can I do a dirty flash so I don't have to lose everything again?
well, now I see that there is no sound. so I guess I will have to flash again.
nate39 said:
well, now I see that there is no sound. so I guess I will have to flash again.
Click to expand...
Click to collapse
There's. Something I'm yet to understand. Did you finally manage to boot into recovery? If so, flash a custom recovery (I recommend philz touch recovery) then use it to make complete wipe.
Then boot into download mode and flash latest pda firmware in the compressed file you downloaded. Ps: make sure it's from your region.
May be if you provided me with your region I'd get you all the files required
I updated to PH7 to see what would happen. After update I try to root with success but after set up a pop up notification said Samsung has detected your device is rooted.
I got no activating reboot loop it just didn't active me at all, not even manually .
So I flash a stocked PG1 and staying stock until a good rom arrives. I edit my APN at lease i got tethering.
I tried the Echoe Rom but I got stuck on splash screen.
jotech said:
I updated to PH7 to see what would happen. After update I try to root with success but after set up a pop up notification said Samsung has detected your device is rooted.
I got no activating reboot loop it just didn't active me at all, not even manually .
So I flash a stocked PG1 and staying stock until a good rom arrives. I edit my APN at lease i got tethering.
I tried the Echoe Rom but I got stuck on splash screen.
Click to expand...
Click to collapse
Thanks for sharing your findings. I was tempted to try it, but I'll hold off.
Yes sir.. your welcome. PH7 detects your rooted and will not activate your phone.
jotech said:
Yes sir.. your welcome. PH7 detects your rooted and will not activate your phone.
Click to expand...
Click to collapse
I also got stuck on the splash screen after flashing Echoe. I am on PF2.
I hope they fix Echoe...
You try the ##72786# trick to get your number associated with your SIM card? I had to do that when I rooted and couldn't activate, ended up activating after doing the ## and rebooting. Though it wasn't the update you're talking about, and I didn't get the "your device is rooted" and notification. Anyways, thanks for the heads up.
Sent from my SM-G930P using Tapatalk
So, you can go back to PG1 from PH7 without problem??
Sent from my SM-G930P using XDA-Developers mobile app
Yes you can i had no problems down grading to PG1
jotech said:
Yes you can i had no problems down grading to PG1
Click to expand...
Click to collapse
Oh, I will do it, thank you.
Sent from my SM-G930P using XDA-Developers mobile app
Anyone have an odin flashable PH7? I tried to OTA update and it fails. I even tried factory reset / reflash PG1 and OTA still fails.
I checked at Samsung-Firmware.org and PH7 is not up yet. Did you extracted PG1 zip into a folder and added to each slot in Odin?
BL AP CP CSC the last slot is HOME_CSC not CSC_SPT . Try PF2 or PE1
jotech said:
I checked at Samsung-Firmware.org and PH7 is not up yet. Did you extracted PG1 zip into a folder and added to each slot in Odin?
BL AP CP CSC the last slot is HOME_CSC not CSC_SPT . Try PF2 or PE1
Click to expand...
Click to collapse
Whoops, no, I didn't do HOME_CSC .. will try that now, thanks.
EDIT: Awesome, the OTA worked after that.
meiskam said:
Anyone have an odin flashable PH7? I tried to OTA update and it fails. I even tried factory reset / reflash PG1 and OTA still fails.
Click to expand...
Click to collapse
The full PH7 firmware has just been posted on Sammobile
jtash01 said:
The full PH7 firmware has just been posted on Sammobile
Click to expand...
Click to collapse
thanks
has anyone been able to get PH7 to stay activated with root?
https://samsung-firmware.org/model/SM-G930P/region/SPR/
You can download PH7 here but you need to register it free
I tried twice and activation didn't stick no success
meiskam said:
Anyone have an odin flashable PH7? I tried to OTA update and it fails. I even tried factory reset / reflash PG1 and OTA still fails.
Click to expand...
Click to collapse
mega link
Yes you can download via torrent
jotech said:
I tried twice and activation didn't stick no success
Click to expand...
Click to collapse
Same here, I tried a lot of different things and could never get the activation to stick while it was rooted. Ended up going back down to PG1 so I could keep it rooted.
IDK why anyone would want to update to PH7 It wont activate your phone. PG1 is working perfect
I was previously rooted and flashed via ODIN back to stock PG1, and everytime I try to OTA Update to PH7 and it fails at 32% during the update. I think it knows some how that I was previous rooted or some ****. I'm going to have to flash the PH7 via ODIN if I want to update, but I'm sure it'll reset my entire phone, unlike the OTA... RIP
Just got November ota update in 60mb i am just curious to know if it is gonna lock the bootloader.
UPDATE-/ BOOTLOADER STILL UNLOCKED I TESTED & DOWNGRADED TO 5.1.1 OK1 .
I just received it as well. I use my phone for work so it's encrypted but could you try to downgrade and let's us know what happened
Yes, you can still downgrade to 4.4.4 with the new update
This update should give me enough time to read the details of the update before it reboots my phone in the 25 seconds. At that point, we don't have the ability to "abort" or decline the agreement anyway.
Note 4 tmo, downloads the 60mb update, phone enters recovery mode then i get "update failed phone will recover the original configuration" .
I'm full stock, no root, no custom recovery no nothing. Anyone could help me?
I'd recommend you use the desktop version of ODIN with the latest FULL ROM to restore your device (without wiping) to the version before the OTA update. You can then try the update process again.
enian.doda said:
Note 4 tmo, downloads the 60mb update, phone enters recovery mode then i get "update failed phone will recover the original configuration" .
I'm full stock, no root, no custom recovery no nothing. Anyone could help me?
Click to expand...
Click to collapse
I encountered the same error last night. I held POWER + VOLUME DOWN to boot into Recovery mode, then I rebooted to System. My phone went through the app optimization process (you know, the screen that you'd see after wiping the Cache/Dalvik Cache).
I assumed that the update failed, but when I checked "About Device," I noticed that it now has the November 1, 2016 security patch (Baseband Version N910TUVS2EPK2).
Anonymously_Unknown said:
I'd recommend you use the desktop version of ODIN with the latest FULL ROM to restore your device (without wiping) to the version before the OTA update. You can then try the update process again.
Click to expand...
Click to collapse
ru_benz said:
I encountered the same error last night. I held POWER + VOLUME DOWN to boot into Recovery mode, then I rebooted to System. My phone went through the app optimization process (you know, the screen that you'd see after wiping the Cache/Dalvik Cache).
I assumed that the update failed, but when I checked "About Device," I noticed that it now has the November 1, 2016 security patch (Baseband Version N910TUVS2EPK2).
Click to expand...
Click to collapse
Sadly mine didn't, as it gave the update failed it reboot normally without app optimization, checked about phone, no changes.
I gave up and updated through Smart Switch... althought the "dm-verification " error still present.
enian.doda said:
Sadly mine didn't, as it gave the update failed it reboot normally without app optimization, checked about phone, no changes.
I gave up and updated through Smart Switch... althought the "dm-verification " error still present.
Click to expand...
Click to collapse
How do u update firmware through smart switch
Sent from my SM-N910T using XDA-Developers mobile app
Anonymously_Unknown said:
This update should give me enough time to read the details of the update before it reboots my phone in the 25 seconds. At that point, we don't have the ability to "abort" or decline the agreement anyway.
Click to expand...
Click to collapse
I noticed it said something about gear3 and RCS messaging system. Didn't have time to read the rest of the change log
SelfElevated2 said:
How do u update firmware through smart switch
Sent from my SM-N910T using XDA-Developers mobile app
Click to expand...
Click to collapse
With phone ON, connect phone to pc through usb, amart switch will tell you automatically THERE'S AN UPDATE AVAILABLE.
Full rom n910tuvs2epk2
Anonymously_Unknown said:
I'd recommend you use the desktop version of ODIN with the latest FULL ROM to restore your device (without wiping) to the version before the OTA update. You can then try the update process again.
Click to expand...
Click to collapse
I just download this from sammobile. Just want to share it...use at your own risk. https://mega.nz/#!oMdHRYaa!vRIN02PsMG6ozSeiRRJ-OBWf0a88x7gVo768my7wpO8
murayoshi said:
I just download this from sammobile. Just want to share it...use at your own risk. https://mega.nz/#!oMdHRYaa!vRIN02PsMG6ozSeiRRJ-OBWf0a88x7gVo768my7wpO8
Click to expand...
Click to collapse
Thanks for sharing
Did you tested it ?
Trex888 said:
Thanks for sharing
Did you tested it ?
Click to expand...
Click to collapse
You're welcome. Not yet because i am in the middle of setting up RamRom when I download it. I am still playing with it. Probably later
murayoshi said:
You're welcome. Not yet because i am in the middle of setting up RamRom when I download it. I am still playing with it. Probably later
Click to expand...
Click to collapse
I flashed the rom through odin, all good.
Still, dm-verification error hunts my phone when entering recovery.
Still no one has a solution to the dm error?
enian.doda said:
I flashed the rom through odin, all good.
Still, dm-verification error hunts my phone when entering recovery.
Still no one has a solution to the dm error?
Click to expand...
Click to collapse
To get rid of it flash custom recovery.
Trex888 said:
To get rid of it flash custom recovery.
Click to expand...
Click to collapse
This thing is i wanted a full stock rom, so to be able to update ota as soon as available.
Custom recovery doesnt offer that.
enian.doda said:
This thing is i wanted a full stock rom, so to be able to update ota as soon as available.
Custom recovery doesnt offer that.
Click to expand...
Click to collapse
Don't take ota updates whenever updates came out sammobiles.com release whole firmware with update.
I had same issue with n910t my i got drk error and i don't see any working method so far the only way is to change motherboard .so whenever i want to update i simply flash whole firmware via odin
Hope that helps
Trex888 said:
Don't take ota updates whenever updates came out sammobiles.com release whole firmware with update.
I had same issue with n910t my i got drk error and i don't see any working method so far the only way is to change motherboard .so whenever i want to update i simply flash whole firmware via odin
Hope that helps
Click to expand...
Click to collapse
Well, I also used odin until now. The fact that you tell me there's no "working method " assures me that you made your searches like I did and found nothing.
Trex888 said:
Don't take ota updates whenever updates came out sammobiles.com release whole firmware with update.
I had same issue with n910t my i got drk error and i don't see any working method so far the only way is to change motherboard .so whenever i want to update i simply flash whole firmware via odin
Hope that helps
Click to expand...
Click to collapse
I have custom ROM and Custom Recovery TWRP.
Will updating the Modem and Bootloader cause me to have to reinstall the ROMS?
Thanks in advance
Stock Nougat N950USQS3BRB2 Odin files for AT&T NOTE 8
Model: SM-N950U
Model Name: Galaxy Note 8
Country: USA
Version: Android Nougat 7.1.1
Security Patch Level: February 1st, 2018
Product Code: ATT
PDA: N950USQS3BRB2
CSC: N950UOYN3BRB2
Download here: N950USQS3BRB2
Thank you for posting this. I was hoping when my phone said there was an update today that it would be Oreo. No such luck. Thanks for the upload though.
AllTheWay said:
Thank you for posting this. I was hoping when my phone said there was an update today that it would be Oreo. No such luck. Thanks for the upload though.
Click to expand...
Click to collapse
It could be close, but you know how that rolls :silly:
Downgrade from 8 to 7.1.1
bboii86 said:
Stock Nougat N950USQS3BRB2 Odin files for AT&T NOTE 8
Model: SM-N950U
Model Name: Galaxy Note 8
Country: USA
Version: Android Nougat 7.1.1
Security Patch Level: February 1st, 2018
Product Code: ATT
PDA: N950USQS3BRB2
CSC: N950UOYN3BRB2
Can I use this download to downgrade from N950USQU2CQL7 (Oreo) back to 7.1.1? The boot loader is 2 going to 3. Will this break my future OWA updates from ATT?
Thanks for any help, because I'm confused.
Click to expand...
Click to collapse
tsquareweb72 said:
bboii86 said:
Stock Nougat N950USQS3BRB2 Odin files for AT&T NOTE 8
Model: SM-N950U
Model Name: Galaxy Note 8
Country: USA
Version: Android Nougat 7.1.1
Security Patch Level: February 1st, 2018
Product Code: ATT
PDA: N950USQS3BRB2
CSC: N950UOYN3BRB2
Can I use this download to downgrade from N950USQU2CQL7 (Oreo) back to 7.1.1? The boot loader is 2 going to 3. Will this break my future OWA updates from ATT?
Thanks for any help, because I'm confused.
Click to expand...
Click to collapse
Yes, you can use this and flash back to Nougat.
Yes, this is bootloader version 3, so you won't be able to flash back to any previous build in bootloader version 2.
No, it won't break any future OTA updates. If you do experience any problems with OTA updates, I do have them available to flash manually, if needed.
Click to expand...
Click to collapse
It worked!
bboii86 said:
tsquareweb72 said:
Yes, you can use this and flash back to Nougat.
Yes, this is bootloader version 3, so you won't be able to flash back to any previous build in bootloader version 2.
No, it won't break any future OTA updates. If you do experience any problems with OTA updates, I do have them available to flash manually, if needed.
Click to expand...
Click to collapse
I installed it and as soon as it booted (and I got through all of the setup), it said there was an OTA update. I installed it and now I'm back to a functional phone with the latest OTA update!
Thank you!
Click to expand...
Click to collapse
tsquareweb72 said:
bboii86 said:
I installed it and as soon as it booted (and I got through all of the setup), it said there was an OTA update. I installed it and now I'm back to a functional phone with the latest OTA update!
Thank you!
Click to expand...
Click to collapse
Your welcome!
Click to expand...
Click to collapse
I cant get this to download. Every time it is corrupt or the files have errors and will not load up to Odin. I've tried different browser, different pcs. Nothing works. What am I doing wrong?
Kakarot2614 said:
I cant get this to download. Every time it is corrupt or the files have errors and will not load up to Odin. I've tried different browser, different pcs. Nothing works. What am I doing wrong?
Click to expand...
Click to collapse
You mean the link isn't working for you?
No, I dont think so. I've tried to download it 20 times already. First time I downloaded, it says download finished. Then when i went to unzip it, there was 5 files and I got some sort of error unzipping on 2 of the 5 files. So I downloaded it again, this time I only got 2 of the 5 files with another error. Redownloaded, got 5 files, error unzipping. Tried different download managers, different browsers.... I'm lost......
Kakarot2614 said:
No, I dont think so. I've tried to download it 20 times already. First time I downloaded, it says download finished. Then when i went to unzip it, there was 5 files and I got some sort of error unzipping on 2 of the 5 files. So I downloaded it again, this time I only got 2 of the 5 files with another error. Redownloaded, got 5 files, error unzipping. Tried different download managers, different browsers.... I'm lost......
Click to expand...
Click to collapse
Hmm, weird. No one else encountered this problem. I'm going to have to upload a new file link.
I am a Noob in odin. So do I just flash those files BL CSC ETC Into odin and thats it? I know how it works .. but I do not know which files to flash. I am in AT&T Note 8.
Cool Person said:
I am a Noob in odin. So do I just flash those files BL CSC ETC Into odin and thats it? I know how it works .. but I do not know which files to flash. I am in AT&T Note 8.
Click to expand...
Click to collapse
Make sure your phone is in download mode. I'm about to give this a go when I get home tonight. There are lots of little things about Oreo that I don't like.
Should be flashing all files that match up with the slots in Odin. I don't think the HomeCSC is absolutely needed (I believe it preserves your data, not sure). I've never used it before. Just know this will erase everything on your device.
My phone is currently bricked, or at least I believe so. It was bricked before and I flashed a different firmware, and after I had it working I upgraded all the updates through the phone to Oreo, from Nougat 7.1.1, and then tried to root it which was stupid on my part, now the firmware that un-bricked my phone won't flash again and it stops after it says xbl.elf. Also on my phone after it fails it says something about SW Rew 3 > binary 2 or something along those lines. I believe this is happening because the firmware I am trying to flash that worked before is now older or something, and right now I am downloading this firmware to try it out.
I have tried flashing this onto the phone, the first time everything went fine, but then when the android came up it said Error..., then it just goes to the charging circle but it doesn't show what my battery is at, and also what I have noticed is my phone will not go into download mode or do anything unless it's plugged in, I have no idea what to do as of right now.
jack man said:
Make sure your phone is in download mode. I'm about to give this a go when I get home tonight. There are lots of little things about Oreo that I don't like.
Should be flashing all files that match up with the slots in Odin. I don't think the HomeCSC is absolutely needed (I believe it preserves your data, not sure). I've never used it before. Just know this will erase everything on your device.
Click to expand...
Click to collapse
Ok let me know how it goes.
Cool Person said:
Ok let me know how it goes.
Click to expand...
Click to collapse
Had a couple of scares but it worked fine.
1. After selecting the files in Odin, it took a while for a couple of the files to populate into the slot. Wasn't expecting it to take so long to analyze the files.
2. After it finished, there was a pause at 32% on the phone saying there was an error. After a minute or so it rebooted.
3. When it rebooted it went to a screen saying the phone was encrypted and to enter my password. I had never encrypted the phone, plus, I had done a complete factory reset before flashing in Odin.
The solution to fix this was to power off, boot to recovery, factory reset and clear cache. It booted up fine after that.
Now I'm back to what I wanted. I had purchased Package Disabler a while back so I first installed that and disabled software update so it won't upgrade to Oreo.
jack man said:
Had a couple of scares but it worked fine.
1. After selecting the files in Odin, it took a while for a couple of the files to populate into the slot. Wasn't expecting it to take so long to analyze the files.
2. After it finished, there was a pause at 32% on the phone saying there was an error. After a minute or so it rebooted.
3. When it rebooted it went to a screen saying the phone was encrypted and to enter my password. I had never encrypted the phone, plus, I had done a complete factory reset before flashing in Odin.
The solution to fix this was to power off, boot to recovery, factory reset and clear cache. It booted up fine after that.
Now I'm back to what I wanted. I had purchased Package Disabler a while back so I first installed that and disabled software update so it won't upgrade to Oreo.
Click to expand...
Click to collapse
So now you are in Oreo?
Cool Person said:
So now you are in Oreo?
Click to expand...
Click to collapse
No. Read my last sentence in my last post. I did all this so I could go back to Nougat and stay there by disabling the software update. I did not like Oreo. I didn't like the way notifications were changed for Oreo. Badges were tied to status bar notifications, unlike Nougat.
Plus, my phone didn't feel as smooth in Oreo and my battery life was worse.
I'm staying on Nougat for a while.
jack man said:
No. Read my last sentence in my last post. I did all this so I could go back to Nougat and stay there by disabling the software update. I did not like Oreo. I didn't like the way notifications were changed for Oreo. Badges were tied to status bar notifications, unlike Nougat.
Plus, my phone didn't feel as smooth in Oreo and my battery life was worse.
I'm staying on Nougat for a while.
Click to expand...
Click to collapse
I will propablu upgrade to android P.
If it gets a major design change.
Is Ui in Oreo almost the same as noughat?
By the way is your Phone Unlocked?
Cool Person said:
I will propablu upgrade to android P.
If it gets a major design change.
Is Ui in Oreo almost the same as noughat?
By the way is your Phone Unlocked?
Click to expand...
Click to collapse
My phone is not unlocked. The UI in Nougat and Oreo are very much the same. There are some features that are different to each one.
I don't see how you can upgrade to Android P. Oreo for Samsung was just released back in March. Unless there's something I don't know, P won't be released for this phone for quite a while. But I hope I'm wrong about that.
Anyone try the new ASD7 update that was uploaded to firmware.science today?
https://firmware.science
joemill said:
Anyone try the new ASD7 update that was uploaded to firmware.science today?
https://firmware.science
Click to expand...
Click to collapse
Can we flash this on the U1
Jose Reyes said:
Can we flash this on the U1
Click to expand...
Click to collapse
The U1 version isn't available yet and I do not believe you can use the U update on a U1 phone
joemill said:
The U1 version isn't available yet and I do not believe you can use the U update on a U1 phone
Click to expand...
Click to collapse
Correct, it will not flash, just tried it.
I flashed it on via SD update this morning, to early to tell on the battery, but the fingerprint is amazing. So much faster and has not missed once for me. (did not need to re-register). No night mode on the camera though so thats a bummer.
What's this update bring?
Sent from my SM-G975U using Tapatalk
It's only 184MB. Probably just a security patch and minor bug/performance fixes.
Unfortunately the screen shot didn't save but have been experiencing some weird screen problems. Kinda hard to explain but it's like the screen black out but the apps and everything else turn like a neo color super weird wished the pics saved.
Sent from my SM-G975U using Tapatalk
I'm going from ASD3 to ASD7 and after the SD update my phone rebooted and is stuck on the Starting Android screen. I'm not sure how long it should take but it has been going for more than 20 mins now... What should I do?
I flashed from ASD3 as well, a couple days ago. Had no issues and haven't had any weird screen problems either. Peanut, try another manual reboot. If it doesn't start after that, maybe try wiping your cache? Worst case, you might have to factory reset.
While we are on the subject of ASD7, is there a way I can flash the update.zip file an not lose my data ?
Flashing it doesn't wipe anything, but you can always backup before as a precaution. I've never had any issues flashing updates like this. Not sure if it helps, but I always wipe cache, before flashing the update.
KillaKelz808 said:
While we are on the subject of ASD7, is there a way I can flash the update.zip file an not lose my data ?
Click to expand...
Click to collapse
If your on ATT, you need to wait for an odin release.
niketom843 said:
Flashing it doesn't wipe anything, but you can always backup before as a precaution. I've never had any issues flashing updates like this. Not sure if it helps, but I always wipe cache, before flashing the update.
Click to expand...
Click to collapse
While that's true for *most* carriers, ATT phones wipe when side loading updates. If your phone has an att logo at boot up, any update.zip file flashed via recovery or adb WILL wipe the device.
Didn't know that about ATT. I was with Nextel/Sprint for almost 20yrs and recently switched to Xfinity, but good to know.
You can Never get AT&T firmware from SamFirm. Always have to Odin TMB or Sprint and use Home CSC. If you know of place to Download ATT firmware let me know Please.
The update that the OP was referring to is from Firmware.science, not SamFirm/Mobile.
niketom843 said:
The update that the OP was referring to is from Firmware.science, not SamFirm/Mobile.
Click to expand...
Click to collapse
Yes I know that did not apply to installing the Update from Firmware.science. I was speaking of Complete ATT firmware to download and Flash in Odin, as I said in message above.
tailgunner9 said:
You can Never get AT&T firmware from SamFirm. Always have to Odin TMB or Sprint and use Home CSC. If you know of place to Download ATT firmware let me know Please.
Click to expand...
Click to collapse
There's a thread here on xda that has ATT firmware / userdata posted. https://forum.xda-developers.com/s10-plus/how-to/g975u-g975u1-firmware-links-t3905897
tailgunner9 said:
Yes I know that did not apply to installing the Update from Firmware.science. I was speaking of Complete ATT firmware to download and Flash in Odin, as I said in message above.
Click to expand...
Click to collapse
https://forum.xda-developers.com/s10-plus/how-to/g975u-g975u1-firmware-links-t3905897
Thanks todd3835.