Database Users

[Q] Note 3 N900W8 soft bricked, backup not working.. can't find a compatible firmware

I'm with Bell (Canada.) I was hesitant to root this device as it's a pretty significant investment, but I have rooted my original note with few issues, so I figured it should work as long as I follow every step carefully. Well unfortunately, upon first trying to root it, apps would start updating right at bootup, and SuperSU continuously crashed. So I decided I was just going to restore it to my original state and be done with it for now. Nope. Once I did this, the phone would just enter a boot cycle. (How does restoring my backup place me into a boot cycle?)
The only SM-N900W8 firmware downloads I can find are for south american regions... I have tried one of them and it failed to install. I am a bit panicked at the moment. Is there some crucial step I'm missing here?

Apra24 said:
I'm with Bell (Canada.) I was hesitant to root this device as it's a pretty significant investment, but I have rooted my original note with few issues, so I figured it should work as long as I follow every step carefully. Well unfortunately, upon first trying to root it, apps would start updating right at bootup, and SuperSU continuously crashed. So I decided I was just going to restore it to my original state and be done with it for now. Nope. Once I did this, the phone would just enter a boot cycle. (How does restoring my backup place me into a boot cycle?)
The only SM-N900W8 firmware downloads I can find are for south american regions... I have tried one of them and it failed to install. I am a bit panicked at the moment. Is there some crucial step I'm missing here?
Click to expand...
Click to collapse
have the same issue a man on xda helped me to get a nandroodmfrom is phone now my phone boot but no network cause i force flash the south america modem, and i have error msg. process system in not reponding and it boot. do u have an errormmsg too?

Yorgo1982 said:
have the same issue a man on xda helped me to get a nandroodmfrom is phone now my phone boot but no network cause i force flash the south america modem, and i have error msg. process system in not reponding and it boot. do u have an errormmsg too?
Click to expand...
Click to collapse
I got an error message trying to flash a SAM firmware. It would just say FAILED in red letters. I'm going to try the Mexico one next, and hopefully it will work. I'm hoping someone could upload a working backup from their phone.

Apra24 said:
I got an error message trying to flash a SAM firmware. It would just say FAILED in red letters. I'm going to try the Mexico one next, and hopefully it will work. I'm hoping someone could upload a working backup from their phone.
Click to expand...
Click to collapse
wait sammobile if u r with rogers bell telus fido vmc koodo, and if with other carrier contact them with ur phone model and serial num so they will upload it ..

Apra24 said:
I'm with Bell (Canada.) I was hesitant to root this device as it's a pretty significant investment, but I have rooted my original note with few issues, so I figured it should work as long as I follow every step carefully. Well unfortunately, upon first trying to root it, apps would start updating right at bootup, and SuperSU continuously crashed. So I decided I was just going to restore it to my original state and be done with it for now. Nope. Once I did this, the phone would just enter a boot cycle. (How does restoring my backup place me into a boot cycle?)
The only SM-N900W8 firmware downloads I can find are for south american regions... I have tried one of them and it failed to install. I am a bit panicked at the moment. Is there some crucial step I'm missing here?
Click to expand...
Click to collapse
Did you restore from CWM/TWRP?

Pikezer1337 said:
Did you restore from CWM/TWRP?
Click to expand...
Click to collapse
TRWP. I'm in the process of uploading a zip of my backup through hotfile, if anyone else who is having the same problem would want to try it out..

Apra24 said:
TRWP. I'm in the process of uploading a zip of my backup through hotfile, if anyone else who is having the same problem would want to try it out..
Click to expand...
Click to collapse
If you restored through TWRP there is a good chance that you are softbricked. There are restoring issues that mess with the system partition.

Update: I was able to flash the tar file from inside the zip of mexican firmware through odin (I was trying to install the zip through TWRM before... perhaps you need to install stock firmwares through odin? It's been a while.)
It's not rooted, and the icons are all different looking... but it's back in working condition

Apra24 said:
Update: I was able to flash the tar file from inside the zip of mexican firmware through odin (I was trying to install the zip through TWRM before... perhaps you need to install stock firmwares through odin? It's been a while.)
It's not rooted, and the icons are all different looking... but it's back in working condition
Click to expand...
Click to collapse
can u give the file name?
plz

Yorgo1982 said:
can u give the file name?
plz
Click to expand...
Click to collapse
I am using the TCE (Mexican) firmware from this link (It won't let me post links since I'm a newly registered account on these forums, but if you google "n900w8 firmware site:samsungis.com" it will be the first result)
I unzipped the file and flashed the tar file within using odin.

Apra24 said:
I am using the TCE (Mexican) firmware from this link (It won't let me post links since I'm a newly registered account on these forums, but if you google "n900w8 firmware site:samsungis.com" it will be the first result)
I unzipped the file and flashed the tar file within using odin.
Click to expand...
Click to collapse
Not working having same prob and same msg pop up. Means my phone is a factory damaged. And since i rooted it we will see what they will do at sammy lol

Yorgo1982 said:
Not working having same prob and same msg pop up. Means my phone is a factory damaged. And since i rooted it we will see what they will do at sammy lol
Click to expand...
Click to collapse
You know what.. Me being a dumbass tried again to root it after restoring it to the mexican firmware, and now I have the same problem. And now the restore isn't working this time. Why did it work once and not again? Who knows? I just keep trying to factory reset and reflash the firmware, but I'm getting nothing but bootloops.

Could this be a Knox created problem? The reason I say this is you were able to restore a "new" (unknown to Knox) firmware, but it failed on the second time (as it is now no longer newer). I wonder if you were able to find a firmware with a later number (ex ...H2 rather than ...H1) it would install?
Sent from my SAMSUNG-SGH-I317

Dumbo53 said:
Could this be a Knox created problem? The reason I say this is you were able to restore a "new" (unknown to Knox) firmware, but it failed on the second time (as it is now no longer newer). I wonder if you were able to find a firmware with a later number (ex ...H2 rather than ...H1) it would install?
Sent from my SAMSUNG-SGH-I317
Click to expand...
Click to collapse
I'm wondering if the official Bell/Rogers firmware will be available any time soon? Does it typically get released soon after the phone launch, or are they withholding it for some reason?

Apra24 said:
You know what.. Me being a dumbass tried again to root it after restoring it to the mexican firmware, and now I have the same problem. And now the restore isn't working this time. Why did it work once and not again? Who knows? I just keep trying to factory reset and reflash the firmware, but I'm getting nothing but bootloops.
Click to expand...
Click to collapse
I was abe to load the peru (SAM) version on my device with no problem, i am with WIND however but under networks i now have lte as an option as before i did not. i did not just download the kernal i download the stock firmware. do a factory rest after the odin process is done.

eklipse1 said:
I was abe to load the peru (SAM) version on my device with no problem, i am with WIND however but under networks i now have lte as an option as before i did not. i did not just download the kernal i download the stock firmware. do a factory rest after the odin process is done.
Click to expand...
Click to collapse
I was trying the Peru one for a while, but it kept hanging up during the bootup. The message was in a foreign language, but I'm assuming it was "initializing". It would initialize for about 3 minutes then an error message would pop up saying something is not responding.

Did you try recovery factory reset right after Odin does the root and installs the files?
Sent from my SM-N900W8 using XDA Premium 4 mobile app

eklipse1 said:
Did you try recovery factory reset right after Odin does the root and installs the files?
Sent from my SM-N900W8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Well I have been trying to. When I flash the firmware in odin, it reinstalls the stock recovery mod. Right after flashing firmware, it won't go into recovery mode on the first boot (first does some android robot install thing, then boots up). I attempted to install the TWRP recovery directly after the firmware, and then booting directly into recovery to factory reset, but I'm still getting a boot loop.

Apra24 said:
You know what.. Me being a dumbass tried again to root it after restoring it to the mexican firmware, and now I have the same problem. And now the restore isn't working this time. Why did it work once and not again? Who knows? I just keep trying to factory reset and reflash the firmware, but I'm getting nothing but bootloops.
Click to expand...
Click to collapse
I think due of the lock. We are not free as b4 to flash anyrom. 2day im shipping my phone to samsung rooted lol how gr8 is that lol

Yorgo1982 said:
I think due of the lock. We are not free as b4 to flash anyrom. 2day im shipping my phone to samsung rooted lol how gr8 is that lol
Click to expand...
Click to collapse
do they know it's rooted/void? Or did you somehow not trigger the knox/warranty void switch? I may just have to do the same thing...

Just got n910t november n910tuvs2epk2 ota update in 60mb

Just got November ota update in 60mb i am just curious to know if it is gonna lock the bootloader.
UPDATE-/ BOOTLOADER STILL UNLOCKED I TESTED & DOWNGRADED TO 5.1.1 OK1 .

I just received it as well. I use my phone for work so it's encrypted but could you try to downgrade and let's us know what happened

Yes, you can still downgrade to 4.4.4 with the new update

This update should give me enough time to read the details of the update before it reboots my phone in the 25 seconds. At that point, we don't have the ability to "abort" or decline the agreement anyway.

Note 4 tmo, downloads the 60mb update, phone enters recovery mode then i get "update failed phone will recover the original configuration" .
I'm full stock, no root, no custom recovery no nothing. Anyone could help me?

I'd recommend you use the desktop version of ODIN with the latest FULL ROM to restore your device (without wiping) to the version before the OTA update. You can then try the update process again.

enian.doda said:
Note 4 tmo, downloads the 60mb update, phone enters recovery mode then i get "update failed phone will recover the original configuration" .
I'm full stock, no root, no custom recovery no nothing. Anyone could help me?
Click to expand...
Click to collapse
I encountered the same error last night. I held POWER + VOLUME DOWN to boot into Recovery mode, then I rebooted to System. My phone went through the app optimization process (you know, the screen that you'd see after wiping the Cache/Dalvik Cache).
I assumed that the update failed, but when I checked "About Device," I noticed that it now has the November 1, 2016 security patch (Baseband Version N910TUVS2EPK2).

Anonymously_Unknown said:
I'd recommend you use the desktop version of ODIN with the latest FULL ROM to restore your device (without wiping) to the version before the OTA update. You can then try the update process again.
Click to expand...
Click to collapse
ru_benz said:
I encountered the same error last night. I held POWER + VOLUME DOWN to boot into Recovery mode, then I rebooted to System. My phone went through the app optimization process (you know, the screen that you'd see after wiping the Cache/Dalvik Cache).
I assumed that the update failed, but when I checked "About Device," I noticed that it now has the November 1, 2016 security patch (Baseband Version N910TUVS2EPK2).
Click to expand...
Click to collapse
Sadly mine didn't, as it gave the update failed it reboot normally without app optimization, checked about phone, no changes.
I gave up and updated through Smart Switch... althought the "dm-verification " error still present.

enian.doda said:
Sadly mine didn't, as it gave the update failed it reboot normally without app optimization, checked about phone, no changes.
I gave up and updated through Smart Switch... althought the "dm-verification " error still present.
Click to expand...
Click to collapse
How do u update firmware through smart switch
Sent from my SM-N910T using XDA-Developers mobile app

Anonymously_Unknown said:
This update should give me enough time to read the details of the update before it reboots my phone in the 25 seconds. At that point, we don't have the ability to "abort" or decline the agreement anyway.
Click to expand...
Click to collapse
I noticed it said something about gear3 and RCS messaging system. Didn't have time to read the rest of the change log

SelfElevated2 said:
How do u update firmware through smart switch
Sent from my SM-N910T using XDA-Developers mobile app
Click to expand...
Click to collapse
With phone ON, connect phone to pc through usb, amart switch will tell you automatically THERE'S AN UPDATE AVAILABLE.

Full rom n910tuvs2epk2
Anonymously_Unknown said:
I'd recommend you use the desktop version of ODIN with the latest FULL ROM to restore your device (without wiping) to the version before the OTA update. You can then try the update process again.
Click to expand...
Click to collapse
I just download this from sammobile. Just want to share it...use at your own risk. https://mega.nz/#!oMdHRYaa!vRIN02PsMG6ozSeiRRJ-OBWf0a88x7gVo768my7wpO8

murayoshi said:
I just download this from sammobile. Just want to share it...use at your own risk. https://mega.nz/#!oMdHRYaa!vRIN02PsMG6ozSeiRRJ-OBWf0a88x7gVo768my7wpO8
Click to expand...
Click to collapse
Thanks for sharing
Did you tested it ?

Trex888 said:
Thanks for sharing
Did you tested it ?
Click to expand...
Click to collapse
You're welcome. Not yet because i am in the middle of setting up RamRom when I download it. I am still playing with it. Probably later

murayoshi said:
You're welcome. Not yet because i am in the middle of setting up RamRom when I download it. I am still playing with it. Probably later
Click to expand...
Click to collapse
I flashed the rom through odin, all good.
Still, dm-verification error hunts my phone when entering recovery.
Still no one has a solution to the dm error?

enian.doda said:
I flashed the rom through odin, all good.
Still, dm-verification error hunts my phone when entering recovery.
Still no one has a solution to the dm error?
Click to expand...
Click to collapse
To get rid of it flash custom recovery.

Trex888 said:
To get rid of it flash custom recovery.
Click to expand...
Click to collapse
This thing is i wanted a full stock rom, so to be able to update ota as soon as available.
Custom recovery doesnt offer that.

enian.doda said:
This thing is i wanted a full stock rom, so to be able to update ota as soon as available.
Custom recovery doesnt offer that.
Click to expand...
Click to collapse
Don't take ota updates whenever updates came out sammobiles.com release whole firmware with update.
I had same issue with n910t my i got drk error and i don't see any working method so far the only way is to change motherboard .so whenever i want to update i simply flash whole firmware via odin
Hope that helps

Trex888 said:
Don't take ota updates whenever updates came out sammobiles.com release whole firmware with update.
I had same issue with n910t my i got drk error and i don't see any working method so far the only way is to change motherboard .so whenever i want to update i simply flash whole firmware via odin
Hope that helps
Click to expand...
Click to collapse
Well, I also used odin until now. The fact that you tell me there's no "working method " assures me that you made your searches like I did and found nothing.

Trex888 said:
Don't take ota updates whenever updates came out sammobiles.com release whole firmware with update.
I had same issue with n910t my i got drk error and i don't see any working method so far the only way is to change motherboard .so whenever i want to update i simply flash whole firmware via odin
Hope that helps
Click to expand...
Click to collapse
I have custom ROM and Custom Recovery TWRP.
Will updating the Modem and Bootloader cause me to have to reinstall the ROMS?
Thanks in advance

Stock Firmware for L29C567? Phone soft bricked!

I was installing TWRP and superuser and something failed. Now the phone soft resets and bounces between TWRP and Huawei eRecovery. Does anyone have a L29C567 firmware I can flash? I've done some searching and there doesn't seem to be any sources for the firmware yet. Just trying to get the phone working again.
I think I could use FunkyHuawei if they had the firmware but I don't believe they do yet.
Edit: Looks like I put this in the wrong sub forum, sorry

Please be patient. Soon enough it will be available.

JJBTEXAS said:
I was installing TWRP and superuser and something failed. Now the phone soft resets and bounces between TWRP and Huawei eRecovery. Does anyone have a L29C567 firmware I can flash? I've done some searching and there doesn't seem to be any sources for the firmware yet. Just trying to get the phone working again.
I think I could use FunkyHuawei if they had the firmware but I don't believe they do yet.
Edit: Looks like I put this in the wrong sub forum, sorry
Click to expand...
Click to collapse
When that happened to me I flashed the update_full_hw_spcseas.zip folder through dload (vol up + down + power) to get the phone booting again.

Try this guide,it will change ur region to Asia C636 but the phone will work 100%
You can rebrand later when official USA version is available.
https://forum.xda-developers.com/mate-9/how-to/guide-rebrand-chinese-al00-mate9-to-t3554656/page4

gm007 said:
Try this guide,it will change ur region to Asia C636 but the phone will work 100%
You can rebrand later when official USA version is available.
https://forum.xda-developers.com/mate-9/how-to/guide-rebrand-chinese-al00-mate9-to-t3554656/page4
Click to expand...
Click to collapse
Yes I did this last night but now I'm stuck on B110. When I tried to flash update_full_hw_spcseas.zip my update restore failed and I got stuck in the bootloop again. I was able to dload B110 again so the phone is running but not sure how to get to B136 or B138 or even B158.

JJBTEXAS said:
Yes I did this last night but now I'm stuck on B110. When I tried to flash update_full_hw_spcseas.zip my update restore failed and I got stuck in the bootloop again. I was able to dload B110 again so the phone is running but not sure how to get to B136 or B138.
Click to expand...
Click to collapse
Do you have all apps and themes installed or they are missing?
To update use system update,try with wifi and 4g, there is 3 dots in the upper right click download latest package.

gm007 said:
Do you have all apps and themes installed or they are missing?
To update use system update,try with wifi and 4g, there is 3 dots in the upper right click download latest package.
Click to expand...
Click to collapse
I lost all the google apps and the keyboard when I tried to updated from B110 to B136 using step 7 "flash hw_data" but got it all back when with dloading back to B110.
I'm trying the updater now and it seems to be updating to B158! will update.

Update worked and I'm now on B158 which is awesome! The only thing that's odd now is that my MEID is 000000000000. I'm not sure if that's a big deal.
To update use system update,try with wifi and 4g, there is 3 dots in the upper right click download latest package.
Click to expand...
Click to collapse
Any reason to use steps 5 - 9 instead of doing the update from B110?

JJBTEXAS said:
Update worked and I'm now on B158 which is awesome! The only thing that's odd now is that my MEID is 000000000000. I'm not sure if that's a big deal.
Any reason to use steps 5 - 9 instead of doing the update from B110?
Click to expand...
Click to collapse
Step 5 to 9 is to restore the Missing application and data i recommend do this steps again.
If you have boot loop boot to stock recovery and do factory reset.

gm007 said:
Step 5 to 9 is to restore the Missing application and data i recommend do this steps again.
If you have boot loop boot to stock recovery and do factory reset.
Click to expand...
Click to collapse
Hmm. I don't think I'm missing any applications though. I have all the google apps, which is what I lost last time I tried.

JJBTEXAS said:
Hmm. I don't think I'm missing any applications though. I have all the google apps, which is what I lost last time I tried.
Click to expand...
Click to collapse
Did you tried a factory reset from settings?
If that didn't restore ur meid than maybe you need to flash the public data zip,will give you link later.

JJBTEXAS said:
Hmm. I don't think I'm missing any applications though. I have all the google apps, which is what I lost last time I tried.
Click to expand...
Click to collapse
sorry but can i ask if you have restore the oeminfo to c636?

eddmecha said:
sorry but can i ask if you have restore the oeminfo to c636?
Click to expand...
Click to collapse
Yes. I did the following:
* Unlock bootloader
* install twrp
1- restore oeminfo for C636 http://www.mediafire.com/?szws87sk7rrkqr6
2- download c636 offline firmware,and flash it from an sd card using 3 buttons method by dload folder. https://forum.xda-developers.com/mat...4/post70465883
3- factory reset from settings.
4-use system update to get the latest firmware.
Basically gm007's but skipping a few steps
The end result was a seemingly complete L29C636B158.

gm007 said:
Did you tried a factory reset from settings?
If that didn't restore ur meid than maybe you need to flash the public data zip,will give you link later.
Click to expand...
Click to collapse
Yes, I believe I did. Is there any reason for me to fix the meid?

JJBTEXAS said:
Yes, I believe I did. Is there any reason for me to fix the meid?
Click to expand...
Click to collapse
If everything is working fine no need, maybe later if you decide to rebrand to original usa version.

gm007 said:
If everything is working fine no need, maybe later if you decide to rebrand to original usa version.
Click to expand...
Click to collapse
That's what I was thinking. I might try another factory reset just to test it.

JJBTEXAS said:
That's what I was thinking. I might try another factory reset just to test it.
Click to expand...
Click to collapse
Could be cause u skiped step 5 there is a mismatch in system files.
The update you got via system update is a small update or full firmware?

gm007 said:
Could be cause u skiped step 5 there is a mismatch in system files.
The update you got via system update is a small update or full firmware?
Click to expand...
Click to collapse
Reset didn't solve it. I think the update was over 2gb so full firmware.

ajsmsg78 said:
When that happened to me I flashed the update_full_hw_spcseas.zip folder through dload (vol up + down + power) to get the phone booting again.
Click to expand...
Click to collapse
hi bro how do u manage that can u full explain ?

Sorry to resurrect the old thread but I am having the same problem with meid number all zeros. The phone seems to work fine except that I cannot get LTE or 4G on certain provider's. Mine is also the US version. What did you do to fix this issue?

ATT //N950U\\ Stock N950USQS3BRB2 Odin Files

Stock Nougat N950USQS3BRB2 Odin files for AT&T NOTE 8
Model: SM-N950U
Model Name: Galaxy Note 8
Country: USA
Version: Android Nougat 7.1.1
Security Patch Level: February 1st, 2018
Product Code: ATT
PDA: N950USQS3BRB2
CSC: N950UOYN3BRB2
Download here: N950USQS3BRB2

Thank you for posting this. I was hoping when my phone said there was an update today that it would be Oreo. No such luck. Thanks for the upload though.

AllTheWay said:
Thank you for posting this. I was hoping when my phone said there was an update today that it would be Oreo. No such luck. Thanks for the upload though.
Click to expand...
Click to collapse
It could be close, but you know how that rolls :silly:

Downgrade from 8 to 7.1.1
bboii86 said:
Stock Nougat N950USQS3BRB2 Odin files for AT&T NOTE 8
Model: SM-N950U
Model Name: Galaxy Note 8
Country: USA
Version: Android Nougat 7.1.1
Security Patch Level: February 1st, 2018
Product Code: ATT
PDA: N950USQS3BRB2
CSC: N950UOYN3BRB2
Can I use this download to downgrade from N950USQU2CQL7 (Oreo) back to 7.1.1? The boot loader is 2 going to 3. Will this break my future OWA updates from ATT?
Thanks for any help, because I'm confused.
Click to expand...
Click to collapse

tsquareweb72 said:
bboii86 said:
Stock Nougat N950USQS3BRB2 Odin files for AT&T NOTE 8
Model: SM-N950U
Model Name: Galaxy Note 8
Country: USA
Version: Android Nougat 7.1.1
Security Patch Level: February 1st, 2018
Product Code: ATT
PDA: N950USQS3BRB2
CSC: N950UOYN3BRB2
Can I use this download to downgrade from N950USQU2CQL7 (Oreo) back to 7.1.1? The boot loader is 2 going to 3. Will this break my future OWA updates from ATT?
Thanks for any help, because I'm confused.
Click to expand...
Click to collapse
Yes, you can use this and flash back to Nougat.
Yes, this is bootloader version 3, so you won't be able to flash back to any previous build in bootloader version 2.
No, it won't break any future OTA updates. If you do experience any problems with OTA updates, I do have them available to flash manually, if needed.
Click to expand...
Click to collapse

It worked!
bboii86 said:
tsquareweb72 said:
Yes, you can use this and flash back to Nougat.
Yes, this is bootloader version 3, so you won't be able to flash back to any previous build in bootloader version 2.
No, it won't break any future OTA updates. If you do experience any problems with OTA updates, I do have them available to flash manually, if needed.
Click to expand...
Click to collapse
I installed it and as soon as it booted (and I got through all of the setup), it said there was an OTA update. I installed it and now I'm back to a functional phone with the latest OTA update!
Thank you!
Click to expand...
Click to collapse

tsquareweb72 said:
bboii86 said:
I installed it and as soon as it booted (and I got through all of the setup), it said there was an OTA update. I installed it and now I'm back to a functional phone with the latest OTA update!
Thank you!
Click to expand...
Click to collapse
Your welcome!
Click to expand...
Click to collapse

I cant get this to download. Every time it is corrupt or the files have errors and will not load up to Odin. I've tried different browser, different pcs. Nothing works. What am I doing wrong?

Kakarot2614 said:
I cant get this to download. Every time it is corrupt or the files have errors and will not load up to Odin. I've tried different browser, different pcs. Nothing works. What am I doing wrong?
Click to expand...
Click to collapse
You mean the link isn't working for you?

No, I dont think so. I've tried to download it 20 times already. First time I downloaded, it says download finished. Then when i went to unzip it, there was 5 files and I got some sort of error unzipping on 2 of the 5 files. So I downloaded it again, this time I only got 2 of the 5 files with another error. Redownloaded, got 5 files, error unzipping. Tried different download managers, different browsers.... I'm lost......

Kakarot2614 said:
No, I dont think so. I've tried to download it 20 times already. First time I downloaded, it says download finished. Then when i went to unzip it, there was 5 files and I got some sort of error unzipping on 2 of the 5 files. So I downloaded it again, this time I only got 2 of the 5 files with another error. Redownloaded, got 5 files, error unzipping. Tried different download managers, different browsers.... I'm lost......
Click to expand...
Click to collapse
Hmm, weird. No one else encountered this problem. I'm going to have to upload a new file link.

I am a Noob in odin. So do I just flash those files BL CSC ETC Into odin and thats it? I know how it works .. but I do not know which files to flash. I am in AT&T Note 8.

Cool Person said:
I am a Noob in odin. So do I just flash those files BL CSC ETC Into odin and thats it? I know how it works .. but I do not know which files to flash. I am in AT&T Note 8.
Click to expand...
Click to collapse
Make sure your phone is in download mode. I'm about to give this a go when I get home tonight. There are lots of little things about Oreo that I don't like.
Should be flashing all files that match up with the slots in Odin. I don't think the HomeCSC is absolutely needed (I believe it preserves your data, not sure). I've never used it before. Just know this will erase everything on your device.

My phone is currently bricked, or at least I believe so. It was bricked before and I flashed a different firmware, and after I had it working I upgraded all the updates through the phone to Oreo, from Nougat 7.1.1, and then tried to root it which was stupid on my part, now the firmware that un-bricked my phone won't flash again and it stops after it says xbl.elf. Also on my phone after it fails it says something about SW Rew 3 > binary 2 or something along those lines. I believe this is happening because the firmware I am trying to flash that worked before is now older or something, and right now I am downloading this firmware to try it out.
I have tried flashing this onto the phone, the first time everything went fine, but then when the android came up it said Error..., then it just goes to the charging circle but it doesn't show what my battery is at, and also what I have noticed is my phone will not go into download mode or do anything unless it's plugged in, I have no idea what to do as of right now.

jack man said:
Make sure your phone is in download mode. I'm about to give this a go when I get home tonight. There are lots of little things about Oreo that I don't like.
Should be flashing all files that match up with the slots in Odin. I don't think the HomeCSC is absolutely needed (I believe it preserves your data, not sure). I've never used it before. Just know this will erase everything on your device.
Click to expand...
Click to collapse
Ok let me know how it goes.

Cool Person said:
Ok let me know how it goes.
Click to expand...
Click to collapse
Had a couple of scares but it worked fine.
1. After selecting the files in Odin, it took a while for a couple of the files to populate into the slot. Wasn't expecting it to take so long to analyze the files.
2. After it finished, there was a pause at 32% on the phone saying there was an error. After a minute or so it rebooted.
3. When it rebooted it went to a screen saying the phone was encrypted and to enter my password. I had never encrypted the phone, plus, I had done a complete factory reset before flashing in Odin.
The solution to fix this was to power off, boot to recovery, factory reset and clear cache. It booted up fine after that.
Now I'm back to what I wanted. I had purchased Package Disabler a while back so I first installed that and disabled software update so it won't upgrade to Oreo.

jack man said:
Had a couple of scares but it worked fine.
1. After selecting the files in Odin, it took a while for a couple of the files to populate into the slot. Wasn't expecting it to take so long to analyze the files.
2. After it finished, there was a pause at 32% on the phone saying there was an error. After a minute or so it rebooted.
3. When it rebooted it went to a screen saying the phone was encrypted and to enter my password. I had never encrypted the phone, plus, I had done a complete factory reset before flashing in Odin.
The solution to fix this was to power off, boot to recovery, factory reset and clear cache. It booted up fine after that.
Now I'm back to what I wanted. I had purchased Package Disabler a while back so I first installed that and disabled software update so it won't upgrade to Oreo.
Click to expand...
Click to collapse
So now you are in Oreo?

Cool Person said:
So now you are in Oreo?
Click to expand...
Click to collapse
No. Read my last sentence in my last post. I did all this so I could go back to Nougat and stay there by disabling the software update. I did not like Oreo. I didn't like the way notifications were changed for Oreo. Badges were tied to status bar notifications, unlike Nougat.
Plus, my phone didn't feel as smooth in Oreo and my battery life was worse.
I'm staying on Nougat for a while.

jack man said:
No. Read my last sentence in my last post. I did all this so I could go back to Nougat and stay there by disabling the software update. I did not like Oreo. I didn't like the way notifications were changed for Oreo. Badges were tied to status bar notifications, unlike Nougat.
Plus, my phone didn't feel as smooth in Oreo and my battery life was worse.
I'm staying on Nougat for a while.
Click to expand...
Click to collapse
I will propablu upgrade to android P.
If it gets a major design change.
Is Ui in Oreo almost the same as noughat?
By the way is your Phone Unlocked?

Cool Person said:
I will propablu upgrade to android P.
If it gets a major design change.
Is Ui in Oreo almost the same as noughat?
By the way is your Phone Unlocked?
Click to expand...
Click to collapse
My phone is not unlocked. The UI in Nougat and Oreo are very much the same. There are some features that are different to each one.
I don't see how you can upgrade to Android P. Oreo for Samsung was just released back in March. Unless there's something I don't know, P won't be released for this phone for quite a while. But I hope I'm wrong about that.

Can I reinstall the android 10 update and keep my files & settings?

Since the update i keep getting a lot of random restarts, i was hoping there maybe an easy way to just reinstall the android 10 update and not have to wipe?
After all it just updates when you get it OTA so i am guessing i can maybe just run that update again in some way?
Can anyone help
thanks
James

Yes. All you must do is to create a Samsung Account and backup everything before wipe out. Once you get wiped, just restore using your Samsung Account.
Also, there are many good apps that you can do it without create an account, although I would create it and backup if I were you.
Cheers

You could also use frija and odin to download and install the latest update, however this is the whole software about 5gb.
You just use home_csc which does not wipe data.

Darkat70 said:
You could also use frija and odin to download and install the latest update, however this is the whole software about 5gb.
You just use home_csc which does not wipe data.
Click to expand...
Click to collapse
Thanks, this sounds what i would probably want, would this be the closest thing to just doing a reinstall in the hope that it may overwrite some bad data that may be making my phone randomly restart?
Is this above basically the same as when you get the OTA and it just installs over the top without losing anything, i'd be best clearing cache after wouldn't I?

james_lpool said:
Thanks, this sounds what i would probably want, would this be the closest thing to just doing a reinstall in the hope that it may overwrite some bad data that may be making my phone randomly restart?
Is this above basically the same as when you get the OTA and it just installs over the top without losing anything, i'd be best clearing cache after wouldn't I?
Click to expand...
Click to collapse
Yes just overwrites existing firmware, i used this method on Tues fo install January security updates. Theres a thread in chat and discussion with all the instructions.

Darkat70 said:
You could also use frija and odin to download and install the latest update, however this is the whole software about 5gb.
You just use home_csc which does not wipe data.
Click to expand...
Click to collapse
Darkat70 said:
Yes just overwrites existing firmware, i used this method on Tues fo install January security updates. Theres a thread in chat and discussion with all the instructions.
Click to expand...
Click to collapse
Darkat, sorry to bother you again i have got the fw and odin etc, i see the home csc which you mentioned, do i still add the ap, bl and cp files or just the home csc one?
Its been years since ive used odin sorry

james_lpool said:
Darkat, sorry to bother you again i have got the fw and odin etc, i see the home csc which you mentioned, do i still add the ap, bl and cp files or just the home csc one?
Its been years since ive used odin sorry
Click to expand...
Click to collapse
Yes add the others to the respective fields in odin.
One thing i did notice, i think the second on the list in odin when i added it, odin seem to stop responding, dont panic about that just leave it for a minute and it will come good.
Remember to uncheck re-partition.

Thank you