Related
After flashing multiple roms & testing, my IMEI is ZERO! Even after I inject new IMEI which I copied from back of battery compartment, I still could not get any network connection (emergency calls only).
If you own the same model & region as mine (ZE550KL z00ld ww), please donate your working QCN to me! I have troubleshoot this issue for the past 48 hours without any improvement, a search yields many phone owners with the same problem. Some cannot get 3G/4G anymore and are stuck on EDGE/2G. My country's 2G infrastructure will be taken down in 3 months time.
This problem could be due to ROM flashing, OTA upgrades, selecting RADIO BAND to USA when living in another country, deleting the modemst1/st2 files etc etc
You may want to replace your IMEI with some arbitary numbers 1199119911991199 or something, even if you don't input any numbers, I will use my own IMEI. IMEI is stored at NVram item 550, just exclude it from the file.
For reference, links to do the change IMEI and restore successfully,
http://www.androidbrick.com/ultimate-guide-qualcomm-snapdragon-imei-baseband-repair-fix-part-2/
http://forum.xda-developers.com/showpost.php?p=69824602&postcount=27
THANK YOU IN ADVANCE!
my email: pokipokipxorn @ gmail.com
Edit: I just did a Network Reset, now my WIFI cannot connect, bummer, wth!
bump, help please!
why can't anyone from this forum try to help me???? (devs included)
u just have to put the phone in DIAG mode (adb shell -> su -> setprop sys.usb.config diag,adb), any CM13 rom will do
install qualcomm drivers
launch qpst
make a QCN BACKUP file
then use a hex editor to edit your IMEIs to 111111111111111111 and attach the files here
that's it, the file is around 700kb only
i find it hard to believe no one else except me need this file.
If u are an avid custom rom flasher, u need this file too!!!! coz its simply too easy! to bork values in the nvram, just by flashing nightlies, ota updates or just trying a new rom, and there are many roms to try here
btw: I found 2 copies of RAW/SERVICE ROM firmware for ZE550KL, it's vital to revive any hard bricks due to partition failure of any kind, will post links later after I find the original links again
Asus Zenfone 2 Laser ZE550KL (Z00LD, WW) SERVICE ROM or FIRMWARE
Service rom/firmware is vital to recovery from any type of partition failure, it is flashed using Asus Flash Tool (AFT). Note that this is different from the usual Asus ROM upgrades. If AFT fails for whatever reason, simply unzip the file and run flashall_AFT.cmd, it's a simple batch file.
there are 2 files, one from a russian forum, another (can't remember), I lost both links but will upload my copy using a higher speed link, mine is 4Mb broadband package only, upload 512kb max.
filename : WW_ZE550KL_21.40.1220.1794_rel_user-20160722041335-secured-releaseAFT.zip
filename : [firmware27].WW_ZE550KL_1.17.40.1234-rel-user-20160304185904-secured-releaseAFT_QC.zip
note: this forum is hopeless!
did u flash the modem, i don't have much knowledge, but i got networks after the modem flashing
nothing worked except a working qcn file (ze550kl), heck i even tried flashing qcn from lenovo/xiaomi which has the same snapdragon chipset, didn't work, radio is dead.
pls make a qcn file, then replace your imei with some other number (111111111111111111) & attach it here, it's for the benefit of others as well.
thank you.
How To Fix Unknown Baseband In Qualcomm Based Phones.
Today 8 out of 10 device by Qualcomm in market and there is one common problem in Qualcomm based phones which is Unknown BaseBand.
Some try to flash phone and some write modems or radio but mostly have no idea why baseband got unknown.
I'm not here just giving solution for Baseband i will tell you reason of this too so you can easily fix whenever you will get device for same.
Reason of unknown baseband & Solution :~
Wrong firmware flashed on device - after flash wrong firmware there is chance to lost baseband because maybe the older firmware look for baseband in c drive (just an example, the author meant 'looking for baseband in the wrong location') and your flashed firmware search it in d drive so you will get unknown baseband cause of wrong path of EFS in firmware, so you can easily fix it by flashing (meaning stock rom)
Corrupted EFS so to fix corrupted EFS you have to erase EFS partition which is MODEMST1, MODEMST2, FSG, please backup these partition first before erase or just erase MODEMST1 and MODEMST2 its safe as FSG is golden copy for them. (FSG is actually a backup of MODEMST1 & 2, golden copy meaning if phone detects erased/zeroed modemst1/2, it will auto copy FSG to modemst1/2)
You can erase partition in fastboot like this "fastboot erase modemst1" and same for other just change partition name,this partition can be erase by adb too as boxes (professional repair kits) do but you will need root and some advance skills
Some time EFS not corrupted, its erased so you can not fixed it by point (2) so you need a working QCN from other working phone (same model) to restore EFS partition.
In order to read and write qcn you need 1 tools QPST ,there is lots of tutorials on net how to read qcn so i will not gonna tell you here same thing so i will cover only important part.
To read write qcn you need qualcomm DIAG port to be enabled and its depend on phone, some phone can enable this just by code and some need root, after root you can use my tool rbsoft mobile tool to enable diag port.
(For enabling DIAG port on ZE550KL, just go adb shell -> su -> setprop sys.usb.config diag,adb Need to disable Windows driver signing first, install Qualcomm drivers to work )
Now you can read and write qcn and you will get your baseband and imei back
To make your work easy i attached QCN in my post for latest phone which come daily on every shop now day.
keep in mind all qcn imei i removed and now its 35000000 (false IMEI) so edit & input your imei with hex editor.
Please if you have QCN which not in our list please post it here it will be helpful for others
Attached Files QCN FILE.zip (662.7 KB, 12 views)
source
Another excellent guide to restoring Qualcomm based phones IMEI/Baseband/No Sims/No Network:
part 1, part 2
Parts relevant to ZE550KL:
Note that the DIAG port cannot be enabled if the phone is using stock rom, so flash CM13 roms so you can enable DIAG port via adb.
pokipokipxorn said:
How To Fix Unknown Baseband In Qualcomm Based Phones.
Today 8 out of 10 device by Qualcomm in market and there is one common problem in Qualcomm based phones which is Unknown BaseBand.
Some try to flash phone and some write modems or radio but mostly have no idea why baseband got unknown.
I'm not here just giving solution for Baseband i will tell you reason of this too so you can easily fix whenever you will get device for same.
Reason of unknown baseband & Solution :~
Wrong firmware flashed on device - after flash wrong firmware there is chance to lost baseband because maybe the older firmware look for baseband in c drive (just an example, the author meant 'looking for baseband in the wrong location') and your flashed firmware search it in d drive so you will get unknown baseband cause of wrong path of EFS in firmware, so you can easily fix it by flashing (meaning stock rom)
Corrupted EFS so to fix corrupted EFS you have to erase EFS partition which is MODEMST1, MODEMST2, FSG, please backup these partition first before erase or just erase MODEMST1 and MODEMST2 its safe as FSG is golden copy for them. (FSG is actually a backup of MODEMST1 & 2, golden copy meaning if phone detects erased/zeroed modemst1/2, it will auto copy FSG to modemst1/2)
You can erase partition in fastboot like this "fastboot erase modemst1" and same for other just change partition name,this partition can be erase by adb too as boxes (professional repair kits) do but you will need root and some advance skills
Some time EFS not corrupted, its erased so you can not fixed it by point (2) so you need a working QCN from other working phone (same model) to restore EFS partition.
In order to read and write qcn you need 1 tools QPST ,there is lots of tutorials on net how to read qcn so i will not gonna tell you here same thing so i will cover only important part.
To read write qcn you need qualcomm DIAG port to be enabled and its depend on phone, some phone can enable this just by code and some need root, after root you can use my tool rbsoft mobile tool to enable diag port.
(For enabling DIAG port on ZE550KL, just go adb shell -> su -> setprop sys.usb.config diag,adb Need to disable Windows driver signing first, install Qualcomm drivers to work )
Now you can read and write qcn and you will get your baseband and imei back
To make your work easy i attached QCN in my post for latest phone which come daily on every shop now day.
keep in mind all qcn imei i removed and now its 35000000 (false IMEI) so edit & input your imei with hex editor.
Please if you have QCN which not in our list please post it here it will be helpful for others
Attached Files QCN FILE.zip (662.7 KB, 12 views)
source
Another excellent guide to restoring Qualcomm based phones IMEI/Baseband/No Sims/No Network:
part 1, part 2
Parts relevant to ZE550KL:
Note that the DIAG port cannot be enabled if the phone is using stock rom, so flash CM13 roms so you can enable DIAG port via adb.
Click to expand...
Click to collapse
Can this QCN use any Zenfone 2 Laser ZE601KL?
I'm just quoting the post, which does not contain any useful QCN for Zenfone.
Please provide service rom for asus ze550kl
My device is hardbricked
No fastboot no recovery
Please help
addy692 said:
Please provide service rom for asus ze550kl
My device is hardbricked
No fastboot no recovery
Please help
Click to expand...
Click to collapse
have u not pc lapy?try dual boot again :silly:
pokipokipxorn said:
After flashing multiple roms & testing, my IMEI is ZERO! Even after I inject new IMEI which I copied from back of battery compartment, I still could not get any network connection (emergency calls only).
If you own the same model & region as mine (ZE550KL z00ld ww), please donate your working QCN to me! I have troubleshoot this issue for the past 48 hours without any improvement, a search yields many phone owners with the same problem. Some cannot get 3G/4G anymore and are stuck on EDGE/2G. My country's 2G infrastructure will be taken down in 3 months time.
This problem could be due to ROM flashing, OTA upgrades, selecting RADIO BAND to USA when living in another country, deleting the modemst1/st2 files etc etc
You may want to replace your IMEI with some arbitary numbers 1199119911991199 or something, even if you don't input any numbers, I will use my own IMEI. IMEI is stored at NVram item 550, just exclude it from the file.
For reference, links to do the change IMEI and restore successfully,
http://www.androidbrick.com/ultimate-guide-qualcomm-snapdragon-imei-baseband-repair-fix-part-2/
http://forum.xda-developers.com/showpost.php?p=69824602&postcount=27
THANK YOU IN ADVANCE!
my email: pokipokipxorn @ gmail.com
Edit: I just did a Network Reset, now my WIFI cannot connect, bummer, wth!
Click to expand...
Click to collapse
Uae this service rom
https://drive.google.com/uc?id=0B43Ue6xY9MmdOGxXZ2RRQUJrOWs&export=download
U will get all files in this
hey guys..
how did u enable the diag port on this device..? any command is not working..
and anyone has Asus_Z00ED working qcn or modem parts..? modemst1 and modemst2..? ZE500KL.? for Asus Laser Quallcomm..?
t-mobile_mda said:
hey guys..
how did u enable the diag port on this device..? any command is not working..
Click to expand...
Click to collapse
diag is working
I need qcn file for Z00L
addy692 said:
diag is working
I need qcn file for Z00L
Click to expand...
Click to collapse
yes it is..there is no pb on diag.. the pb is modemparts or qcn.. we need working device..
t-mobile_mda said:
yes it is..there is no pb on diag.. the pb is modemparts or qcn.. we need working device..
Click to expand...
Click to collapse
My imei is lost
Its been 1 month
No one is sharing qcn file or efs backup
addy692 said:
My imei is lost
Its been 1 month
No one is sharing qcn file or efs backup
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B_D6S6CoxAwEaW9tUVNuSEJycTg/view?usp=drivesdk
Link to QCN file.
Search for 1111111111111111 - SIM 1 IMEI & 1111111111111112 - SIM 2 IMEI
and replace with yours in correct format.
Just for info my device is ZOOL 3GB/16GB Snapdragon 615 variant.
Sent from my ASUS_Z00LD using Tapatalk
addy692 said:
Please provide service rom for asus ze550kl
My device is hardbricked
No fastboot no recovery
Please help
Click to expand...
Click to collapse
How do you enter diag mode?
I tried root WW Android 6.x version which cannot enter diag mode.
chchtono said:
How do you enter diag mode?
I tried root WW Android 6.x version which cannot enter diag mode.
Click to expand...
Click to collapse
adb
adb devices
adb shell
su
insmod /system/lib/modules/diagchar.ko
setprop sys.usb.config diag,adb
After flashing stock ROM, I faced unknown baseband issue. Then, restored a working qcn of other k6 power device. But, after that IMEI and Serial Number got changed. I changed the IMEI number using some tool. Is there a way to change the serial number too?
bhai i am facing baseband unknown version
and imei 0 on both sims
how do i fix it?
ps: i am rooted with twrp stock nougat 7.0
flashing qcn cant change serial number, only imei can change, which you can obviously cure using hex editing
Note that custom roms dont show the serial number of device, only stock roms do
gtsfreak said:
bhai i am facing baseband unknown version
and imei 0 on both sims
how do i fix it?
ps: i am rooted with twrp stock nougat 7.0
Click to expand...
Click to collapse
For this you have to relock bootloader unroot and downgrade to marshmallow
then only you can flash qcn as diag mode has to be enabled for qcn flashing via qpst tool,
and only marshmallow can Reed your port in diag mode and then only qcn file can be flashed
So steps will be
1 relock bootloader and unroot
2 flash stock marshmallow with qfil tool
3 open phone i diag mode ( vol. up + power)
4 the blue screen is the diag mode
5 then flash qcn with qpst tool
Lenovo phab imei and SN and pn lost
ajay74 said:
For this you have to relock bootloader unroot and downgrade to marshmallow
then only you can flash qcn as diag mode has to be enabled for qcn flashing via qpst tool,
and only marshmallow can Reed your port in diag mode and then only qcn file can be flashed
So steps will be
1 relock bootloader and unroot
2 flash stock marshmallow with qfil tool
3 open phone i diag mode ( vol. up + power)
4 the blue screen is the diag mode
5 then flash qcn with qpst tool
Click to expand...
Click to collapse
Hello Sir,
I have lenovo phab pb1 750 m snapdragon 410 device
I was on marshmallow and flashed lollipop stock and lost device ID like imei , SN, pn..I have all of them I just can't write..I am in Marshmallow currently rooted and bootloader unlocked..
But qpst gives a read only error while writing Changed RF and NV items to phone.
Is their a fix please let me know
Also what is right way to connect phone for qpst I connect in switched on mode and using minimal adb and fastboot I gain root access then only com port is available and my phone will be listed under active phones tab in qpst.
Also com port shows in edl mode but than qpst does not detect active phone only detect as a port.
Please if their is a way let me know.
Very much thanks!
lenovo k6
please i need qcn file for lenovo k6 k33b36
Try this...
Install twrp and root your phone if you haven't already.
adb shell
su setprop sys.usb.config diag,adb
Put phone in ptp mode for the USB setting, you should now have diagnostic mode engaged.
If not, play with the USB settings and the setprop command.
As for the actual flashing of a new imei, you must first zero out your modemst1 and modemst2 partitions.
Boot into recovery, and use the shell for something like...
dd if=/dev/zero of=/dev/block/device/by-name/modemst1
Take a look in your /dev/ folder, you'll figure out what the path is.
Repeat for modemst2
Make a qcn of the zeroed partitions, copy it multiple times in order to always have a zeroed backup.
Write to the zeroed partitions multiple times with the same data.
Meid will write before the imei so you should expect to see it first.
Power cycle your device and behold the greatness of RTFM-ing qpst.
---------- Post added at 08:53 AM ---------- Previous post was at 08:39 AM ----------
Whether it be from an unfortunate situation involving some drunken goats and a botched system update or having it disappear from installing a custom rom, how does one go about writing a serial number to a Qualcomm S.O.C.?
zakee94 said:
flashing qcn cant change serial number, only imei can change, which you can obviously cure using hex editing
Note that custom roms dont show the serial number of device, only stock roms do
Click to expand...
Click to collapse
is there a way to change serial number (not imei) in qualcomm devices?
is there any special tool?
Ssd
alemarprieto said:
hello i want to repair mi xiaomi mi a1 let me explain what happen . i accidentally used factory reset and mi cell phone got bricked i tried to repair it flashing android 8 (january) but it got reboot and reboot after 1 minute of get into launch app .(i could solve that problem using “dd[/url] if=/sdcard/persist.img of=/dev/block/mmcblk0p27” via TWRP terminal mi cell phone is Working noW but it lost imei and baseband i tried to restore efs using another mi a 1 cellphone (android 7) but it only restored baseband and the first imei is 0 imei sv 00 but second is unknown and unknown , hoW can i fix it?. please:crying:
imei 1 is 867559033212389
imei 2 is 867559033212397
Click to expand...
Click to collapse
flash full stock firmware via mi flash or fastboot
Ahmed.ragab said:
flash full stock firmware via mi flash or fastboot
Click to expand...
Click to collapse
Hello, i did it vía edl and normal flash too ,the same happened but i want to try, please can you give me a link of that filmware to download ? Thancks
Hi , Don't share your IMEI Publicly .
if you face IMEI 0 and SIM 2 IMEI unknown , Use WriteDualIMEI(W+G_eMMC) Tools to rewrite your IMEI (Google the tools as i can't find the link anymore)
To Enable Diag Mode , you need to follow the steps :
1. dial : *#*#717717#*#*
2.Enable USB Debug
3.Connect to the phone
4.Run WriteDualIMEI(W+G_eMMC) as admin
5.Write your ORIGINAL IMEI Note: Change IMEI is illegal
6.Success , Dial *#*#717717#*#* to disable Diag USB PORT
7.Reboot
8.Feedback
alemarprieto said:
hello i want to repair mi xiaomi mi a1 let me explain what happen . i accidentally used factory reset and mi cell phone got bricked i tried to repair it flashing android 8 (january) but it got reboot and reboot after 1 minute of get into launch app .(i could solve that problem using “dd[/url] if=/sdcard/persist.img of=/dev/block/mmcblk0p27” via TWRP terminal mi cell phone is Working noW but it lost imei and baseband i tried to restore efs using another mi a 1 cellphone (android 7) but it only restored baseband and the first imei is 0 imei sv 00 but second is unknown and unknown , hoW can i fix it?. please:crying:
Click to expand...
Click to collapse
Dude don't put your IMEI here it can be misused, here is the link for Official Rom
Link 1 :http://bigota.d.miui.com/8.1.10/tissot_images_8.1.10_20180110.0000.00_8.0_8ea503201b.tgz
Link 2 (Mirror):https://androidfilehost.com/?w=files&flid=240798
Pls hide ur imei, someone could use it.
JoKeRLeE said:
Hi , Don't share your IMEI Publicly .
if you face IMEI 0 and SIM 2 IMEI unknown , Use WriteDualIMEI(W+G_eMMC) Tools to rewrite your IMEI (Google the tools as i can't find the link anymore)
To Enable Diag Mode , you need to follow the steps :
1. dial : *#*#717717#*#*
2.Enable USB Debug
3.Connect to the phone
4.Run WriteDualIMEI(W+G_eMMC) as admin
5.Write your ORIGINAL IMEI Note: Change IMEI is illegal
6.Success , Dial *#*#717717#*#* to disable Diag USB PORT
7.Reboot
8.Feedback
Click to expand...
Click to collapse
thank u so much joker to take the time to read an ansWer , it didn't Work i use the : adb devices
adb shell
su
setprop sys.usb.config diag,adb (becose pc DiDnt recognice the phone using *#*#717717#*#* ) anyai i set it in Diag mode enable , then folloW everithing but didnt Work (of course the program said success) an i disable using (Dial *#*#717717#*#*),after reboot everithing looks the same (imei 1 =0 ,imei sv =00,imei 2 unkno, imei sv unko) baseband is ta.2.3.c1-00544-8953_gen_pak-1
Ahmed.ragab said:
flash full stock firmware via mi flash or fastboot
Click to expand...
Click to collapse
as u can read i already did it ,via edl too
alemarprieto said:
thank u so much joker to take the time to read an ansWer , it didn't Work i use the : adb devices
adb shell
su
setprop sys.usb.config diag,adb (becose pc DiDnt recognice the phone using *#*#717717#*#* ) anyai i set it in Diag mode enable , then folloW everithing but didnt Work (of course the program said success) an i disable using (Dial *#*#717717#*#*),after reboot everithing looks the same (imei 1 =0 ,imei sv =00,imei 2 unkno, imei sv unko) baseband is ta.2.3.c1-00544-8953_gen_pak-1
Click to expand...
Click to collapse
Are you on Oreo ? or Nougat ? I tried all the rom won't work except 7.8.23 Build (first and buggy ROM)
if you tried my method still fail i suggest you to restore using qcn backup , which i personally made for you ( With your IMEI)
but i wont share here but through PM .
You need driver to do this
QPST Setup : https://ia801906.us.archive.org/22/items/QPST.2.7.441/QPST.2.7.441.zip
Qualcomm Driver : http://www.mediafire.com/file/x83c76ektjf2868/QUD.WIN.1.1+Installer-10034.4.zip
*Link taken from :http://en.miui.com/thread-545300-1-1.html
you may follow the guide from there
JoKeRLeE said:
Are you on Oreo ? or Nougat ? I tried all the rom won't work except 7.8.23 Build (first and buggy ROM)
if you tried my method still fail i suggest you to restore using qcn backup , which i personally made for you ( With your IMEI)
but i wont share here but through PM .
You need driver to do this
QPST Setup : https://ia801906.us.archive.org/22/items/QPST.2.7.441/QPST.2.7.441.zip
Qualcomm Driver : http://www.mediafire.com/file/x83c76ektjf2868/QUD.WIN.1.1+Installer-10034.4.zip
*Link taken from :http://en.miui.com/thread-545300-1-1.html
you may follow the guide from there
Click to expand...
Click to collapse
hello jokerlee,
can you make me a qcn with my IMEI too? i will send you a PM
변은주 said:
hello jokerlee,
can you make me a qcn with my IMEI too? i will send you a PM
Click to expand...
Click to collapse
why not
please help, I also run the factory_reset and lost my imei, tried follwing those steps:
Posted by JoKeRLeE
https://www.androidfilehost.com/?fid=673956719939818468
Replace the IMEi with UR Own IMEI . if not it's illegal to use this QCN
Password : testnreport
if you don't know how to change IMEI Using hex editor , try my method . DO NOT use QCN to restore .
(hex and imei provided in order for u to find n replace)
i lost my imei n spent me about 6days n 8 hours per day to find a way to fix it .
actually it's easy to fix the problem .
My own method
1. download the older rom (7.8.23) Link
2. Use flash_all.bat
3.reboot into fastboot mode , erase modemst1 and modemst2 .
fastboot erase modemst1
fastboot erase modemst2
4. reboot
5. go to phone , enter *#*#717717#*#*
6.got to settings enable USB Debugging (ADB)
7. disconnect your phone n connect it back
8.Use WriteDualIMEI(W+G_eMMC) Remember run as administrator , enter your IMEI .
9.if success , go to phone enter *#*#717717#*#* to disable the diag port
10. reboot
Done .
Click to expand...
Click to collapse
the phone freezes upon dialing the *#*#717717#*#* but
can (only) boot to diag mode from fastboot and then "fastboot oem edl". I see the top led blinking in white.
I get stuck in step8 - despite my phone diag port is being recognized in device manage and WriteDualIMEI/QFIL, I get
a big FAIL.
In QFIL I can see the phone is recognized but is not responding to coms.
I tried to change the qualcomm driver to various 9XXX models, com ports, settings etc.
Tried to change fastboot rom versions to 8.XX as well. didn't make a difference.
tried to setprop usb mode to diag from twrp terminal as well.
How did you guys resolve it?
JoKeRLeE said:
Are you on Oreo ? or Nougat ? I tried all the rom won't work except 7.8.23 Build (first and buggy ROM)
if you tried my method still fail i suggest you to restore using qcn backup , which i personally made for you ( With your IMEI)
but i wont share here but through PM .
You need driver to do this
QPST Setup : https://ia801906.us.archive.org/22/items/QPST.2.7.441/QPST.2.7.441.zip
Qualcomm Driver : http://www.mediafire.com/file/x83c76ektjf2868/QUD.WIN.1.1+Installer-10034.4.zip
*Link taken from :http://en.miui.com/thread-545300-1-1.html
you may follow the guide from there
Click to expand...
Click to collapse
it successfully restored my imei thank u so much . you are the best:highfive:
Ok, IMEI is back. Unfortunately, if I update software I loose it again after first reboot. Will all of us have to stick to the very buggy August ROM forever? Anyone found a workaround for this?
JoKeRLeE said:
Are you on Oreo ? or Nougat ? I tried all the rom won't work except 7.8.23 Build (first and buggy ROM)
if you tried my method still fail i suggest you to restore using qcn backup , which i personally made for you ( With your IMEI)
but i wont share here but through PM .
You need driver to do this
QPST Setup : https://ia801906.us.archive.org/22/items/QPST.2.7.441/QPST.2.7.441.zip
Qualcomm Driver : http://www.mediafire.com/file/x83c76ektjf2868/QUD.WIN.1.1+Installer-10034.4.zip
*Link taken from :http://en.miui.com/thread-545300-1-1.html
you may follow the guide from there
Click to expand...
Click to collapse
Hi! Can you do it for me too? I can send my IMEI via inbox. I can't appreciate it enough!
bro i also wan qcn file can you create for me plz....
hello everyone, I come to ask for help for my lenovo Z6 pro which was bought on Aliexpress and with global rom, updating update gave infinite lenovo loop so i flash the original chinese rom by qfil and turning on the device it is back to normal but now it Wifi does not work or SIM cards without IMEI, I am trying to restore Imei but I can not put the mode Quallcomm Diag on z6 pro.
please help me .
valdo0022 said:
hello everyone, I come to ask for help for my lenovo Z6 pro which was bought on Aliexpress and with global rom, updating update gave infinite lenovo loop so i flash the original chinese rom by qfil and turning on the device it is back to normal but now it Wifi does not work or SIM cards without IMEI, I am trying to restore Imei but I can not put the mode Quallcomm Diag on z6 pro.
please help me .
Click to expand...
Click to collapse
Hi, i have problem me to, please help
Qcn file z6 pro
Aprenda a pronunciar
Hello, I need your help to recover the imei of my z6 pro, I restored the imei but the SIM CARDS do not give signal network. I saw you need the QCN file from another z6 pro, can you give me the file? please!
hello valdo, as you managed to restore the imeis, could you please help me restore them. thank you
valdo0022 said:
Aprenda a pronunciar
Hello, I need your help to recover the imei of my z6 pro, I restored the imei but the SIM CARDS do not give signal network. I saw you need the QCN file from another z6 pro, can you give me the file? please!
Click to expand...
Click to collapse
Crisfalt said:
hello valdo, as you managed to restore the imeis, could you please help me restore them. thank you
Click to expand...
Click to collapse
Hello, you fixed the problem? i lost the imeis but restore it with a QCN Backup, but i dont have signal... thanks for your help
i find the fix: thanks to tommyb2 in Lenovo english forum for the tip
As it looks like you damaged your qcn you need a new one !
is your WiFi working ??
if not try this first !
enter Fastboot
then
Fastboot erase persist
Fastboot flash persist persist.img
(your WiFi should be back)
try
Fastboot erase Modem
then
Fastboot flash Modem non-hlos.img
After that Fastboot reboot !
maybe also your imei ?!
if not get a QCN, enter Diag mode (see page 12-13)
and replace it with a new one !
with an imei editor you can put in your imei
The Files you found in your current ROM !
Non-hlos.bin has to be renamed to.img
x-geo said:
Hello, you fixed the problem? i lost the imeis but restore it with a QCN Backup, but i dont have signal... thanks for your help
i find the fix: thanks to tommyb2 in Lenovo english forum for the tip
As it looks like you damaged your qcn you need a new one !
is your WiFi working ??
if not try this first !
enter Fastboot
then
Fastboot erase persist
Fastboot flash persist persist.img
(your WiFi should be back)
try
Fastboot erase Modem
then
Fastboot flash Modem non-hlos.img
After that Fastboot reboot !
maybe also your imei ?!
if not get a QCN, enter Diag mode (see page 12-13)
and replace it with a new one !
with an imei editor you can put in your imei
The Files you found in your current ROM !
Non-hlos.bin has to be renamed to.img
Click to expand...
Click to collapse
Hello, I also deleted imei info by mistake, can you provide with a dummy lenovo z6 pro QCN file, so I can restore mine? Thank you
Is all lost?
It's been a few days and no replays, let me guess I can trow the phone away ? since there is no QCN file available for restoring
Don't throw away. Get a sain QCN file, put your emei in it and flash back.
kjawenm said:
Hello, I also deleted imei info by mistake, can you provide with a dummy lenovo z6 pro QCN file, so I can restore mine? Thank you
Click to expand...
Click to collapse
I leave you mine with a random imei, change it to yours and tell me if works (change the extension to QCN)
something happened
Thank you for the qcn file, it did help but not nearly enough.
Any other ideas on how to fix this ? I'm giving up on this 'cuz it seems so ...... chinese .
Edit1: Do I need to change MEID or any other unique ids ?
kjawenm said:
Thank you for the qcn file, it did help but not nearly enough.
Any other ideas on how to fix this ? I'm giving up on this 'cuz it seems so ...... chinese .
Edit1: Do I need to change MEID or any other unique ids ?
Click to expand...
Click to collapse
mied, is part of the imei... not neccesary to modify...
now, do this:
enter Fastboot
then
Fastboot erase persist
Fastboot flash persist persist.img
Fastboot erase Modem
Fastboot flash Modem non-hlos.img
Fastboot reboot
I'm sorry it took so long to respond but I was on a trip.
It works, I've got my signal back, but sometimes when I start a conversation the other person hears bad, like when you speak underwater. It doesn't happen when I put my headphones(not yet anyway),
but I guess this will be solved in the future updates.
Thank you very much :victory: :good:
Issue persist after upgrading
Hey....again
After upgrading to 11.0.325ST -> from This post.
I lost the signal again.
Doing "fastboot erase persist
fastboot flash persist persist.img
fastboot erase modem
fastboot flash modem NON-HLOS.img
fastboot reboot " does not help.
Any Idea on how to get back the signal ?
Thank you,
kjawenm said:
Hey....again
After upgrading to 11.0.325ST -> from This post.
I lost the signal again.
Doing "fastboot erase persist
fastboot flash persist persist.img
fastboot erase modem
fastboot flash modem NON-HLOS.img
fastboot reboot " does not help.
Any Idea on how to get back the signal ?
Thank you,
Click to expand...
Click to collapse
do you have the backup of the original qcn?
Signal Lost
Hello,
No, I don't, the only QCN file I have is the one you gave me and modified with my IMEI.
As a note that QCN file give a warning that my model no. doesn't match when restoring, but it works on stock ROW rom.
Thank you,
kjawenm said:
Hello,
No, I don't, the only QCN file I have is the one you gave me and modified with my IMEI.
As a note that QCN file give a warning that my model no. doesn't match when restoring, but it works on stock ROW rom.
Thank you,
Click to expand...
Click to collapse
Hi, if you are on ROW, update through OTA to 11.0.350. Many Z6 owners have reported it fixed connexion issues. It might help you as well!
benjieb said:
Hi, if you are on ROW, update through OTA to 11.0.350. Many Z6 owners have reported it fixed connexion issues. It might help you as well!
Click to expand...
Click to collapse
Hello,
Sometimes i can;t because phone is rooted, sometimes when i get OTA update I can't install because after i press "update" it resets to changelog.
Also when I try to update through .ZIP file it fails and I lose signal.
Zip file name : L78051_ROW_SECURE_USER_Q00745.01_P_ROW_11.0.284_ST_190810_TO_L78051_ROW_SECURE_USER_Q00745.01_P_ROW_11.0.325_ST_190918 (renamed to update.zip)
Thank you,
One way or another, you need to find a way to update your phone to latest ROW rom which is 11.0.350.
Try unrooting and flashing back stock recovery. Otherwise find a full rom file that can be flashed with fastboot.
My issue is not with the version. My issue is with qcn file for my signal.
Most likely I will need a new dummy QCN file from Lenovo z6 pro from latest ROW rom version, change the dummy imei to my imei and restore.
Most likely x-geo will have a good idea of what I must do, 'cuz last time he solved my signal issue. If you have Lenovo z6 pro with latest rom you can back up your QCN file set a dummy
imei and send it over and I'll try and/ restore my phone, that will be greatly appreciated.
Thank you,
Liste, updating to 11.0.350 solved communication issue of many users !!!
May be it resets proper QCN partition or whatever. Anyway there is no point in staying with earlier ROW version they are crap !
Dear all,
I've flashed stock rom for tb-x704v by QFIL.
It has lost baseband firmware. It is unable to recognize sim card, unknown imei, unknown baseband version and no Phone app appear in app drawer.
Any one can help me fix it, please?
If you have tb-x704v please help give your baseband QCN backup.
Many thanks for your support.
QCN Backup, few day ago i to erase persist)))
maximgorbilev said:
QCN Backup, few day ago i to erase persist)))
Click to expand...
Click to collapse
many thanks for your support. Unfortunetly, the SIM card still has not be recognized.
Imei is recovered, but no signal and no service.
Could you please help to backup your efs partition. It think it must sync between efs and imei.
Cao Huỳnh Nhân said:
many thanks for your support. Unfortunetly, the SIM card still has not be recognized.
Imei is recovered, but no signal and no service.
Could you please help to backup your efs partition. It think it must sync between efs and imei.
Click to expand...
Click to collapse
1. i flashed persist.img from firmware folder
2. qfil is not recover my tablet, reset after first screen, i recover tab with mi flash pro, try it, maybe help
maximgorbilev said:
1. i flashed persist.img from firmware folder
2. qfil is not recover my tablet, reset after first screen, i recover tab with mi flash pro, try it, maybe help
Click to expand...
Click to collapse
Do you mean flash persist.img or entire firmware by using Miflash pro?
I've tried to recover my tablet by Rescued and SmartAssistant, SIM card has been recognized but network has not been recognized.
Cao Huỳnh Nhân said:
Do you mean flash persist.img or entire firmware by using Miflash pro?
Click to expand...
Click to collapse
Yes. Qfil and RSA do not recover my tablet, and i flash persist.img from twrp is manual, before reflash firmware.
maximgorbilev said:
Yes. Qfil and RSA do not recover my tablet, and i flash persist.img from twrp is manual, before reflash firmware.
Click to expand...
Click to collapse
I've flash persist.img from twrp and reflash firmware by RSA. But network still not work.
Could you please guide me flash firmware with Miflash pro?
Cao Huỳnh Nhân said:
I've flash persist.img from twrp and reflash firmware by RSA. But network still not work.
Could you please guide me flash firmware with Miflash pro?
Click to expand...
Click to collapse
download the mi flash pro package, launch it, go to the mi flash tab, select the folder with the firmware, give an error that there is no script, score.
In config, manually select raw and patch files from the firmware folder, all other checkboxes are unchecked, the fields are empty.
mi account is not needed, just close this window, the window with downloading drivers too, they look like the instructions for QFIL.
Turn off the tablet, hold down both volume buttons and connect to the PC, press refresh, the port will appear in the list, select clear all at the bottom, and press flash (it does not immediately sew 5 seconds, it thinks like qfil).
After that, the tablet was normally encrypted and wound up.
Sewed 2 times, tk. I didn't hope to help, first I put 55 + clean all and lock started, then 56 + clean all and it also worked.
The bootloader was not blocked, the Jackdaw was standing but in the bootloader oem lock was false.
maximgorbilev said:
download the mi flash pro package, launch it, go to the mi flash tab, select the folder with the firmware, give an error that there is no script, score.
In config, manually select raw and patch files from the firmware folder, all other checkboxes are unchecked, the fields are empty.
mi account is not needed, just close this window, the window with downloading drivers too, they look like the instructions for QFIL.
Turn off the tablet, hold down both volume buttons and connect to the PC, press refresh, the port will appear in the list, select clear all at the bottom, and press flash (it does not immediately sew 5 seconds, it thinks like qfil).
After that, the tablet was normally encrypted and wound up.
Sewed 2 times, tk. I didn't hope to help, first I put 55 + clean all and lock started, then 56 + clean all and it also worked.
The bootloader was not blocked, the Jackdaw was standing but in the bootloader oem lock was false.
Click to expand...
Click to collapse
Thanks for your support. I follow your guide but network never be recognized.
I will use it as wifi version.
Thank you!