I have Huawei Mate 9 with internal wifi running in monitor mode
Installing the Huawei P9 firmware 7_45_77_0_hw (8-2017) with the nexmon tools with android 7.0
https://github.com/seemoo-lab/nexmon
n.pikota said:
I have Huawei Mate 9 with internal wifi running in monitor mode
Installing the Huawei P9 firmware 7_45_77_0_hw (8-2017) with the nexmon tools with android 7.0
https://github.com/seemoo-lab/nexmon
Click to expand...
Click to collapse
Can you give me your .zip please
https://mega.nz/#!a0ZlCIIJ!HXvFW_F-CKe2298BIdURE4kI1QsICp-w9dEefPCoR0U
n.pikota said:
https://mega.nz/#!a0ZlCIIJ!HXvFW_F-CKe2298BIdURE4kI1QsICp-w9dEefPCoR0U
Click to expand...
Click to collapse
how to use this?
Addymore said:
how to use this?
Click to expand...
Click to collapse
It's my WiFi patched firmware file. anastasiszn Asked for my zip file but I do not know what is
n.pikota said:
It's my WiFi patched firmware file. anastasiszn Asked for my zip file but I do not know what is
Click to expand...
Click to collapse
How to use nexmon to listen to wifi...?
n.pikota said:
It's my WiFi patched firmware file. anastasiszn Asked for my zip file but I do not know what is
Click to expand...
Click to collapse
Send me your patched firmware. I flash it
You have to use the nexmon tools to pached your firmware
n.pikota said:
You have to use the nexmon tools to pached your firmware
Click to expand...
Click to collapse
Not working in my device. Enable monitor mode and show me screen
Related
Hi guys my pc win10 can't recognize my p9 lite it just charging my phone i enabled usb debugging and i have hisute installed in my pc
Edit: Iam on EMUI 5.0
Abdulla7 said:
Hi guys my pc win10 can't recognize my p9 lite it just charging my phone i enabled usb debugging and i have hisute installed in my pc
Click to expand...
Click to collapse
Did you enable MTP for data transfers?
Or are you trying to set up adb?
dariomrk said:
Did you enable MTP for data transfers?
Or are you trying to set up adb?
Click to expand...
Click to collapse
trying to setup adb
Abdulla7 said:
trying to setup adb
Click to expand...
Click to collapse
Try updating the drivers.
Did you download google drivers?
dariomrk said:
Try updating the drivers.
Did you download google drivers?
Click to expand...
Click to collapse
no didn't install Google drivers
** in device manager no thing about p9 lite or any Huawei mobile
Abdulla7 said:
no didn't install Google drivers
** in device manager no thing about p9 lite or any Huawei mobile
Click to expand...
Click to collapse
Hmm... On what rom are you?
Are you using a custom rom or stock?
dariomrk said:
hmm... On what rom are you?
Are you using a custom rom or stock?
Click to expand...
Click to collapse
stock emui 5.0 b331
Abdulla7 said:
stock emui 5.0 b331
Click to expand...
Click to collapse
Oh... Sorry i have no experience with the beta emui.
Sorry, hopefully someone else knows what to do.
Regards Dario
Link to download the new single emui SIM Huawei p8 lite ALE-L21?
For lazyass who can't access google.
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1084/g104/v77067/f1/full/update.zip
Audriuskins said:
For lazyass who can't access google.
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1084/g104/v77067/f1/full/update.zip
Click to expand...
Click to collapse
It works on ale-l21 c43 ...?
Giuseppe300715 said:
It works on ale-l21 c43 ...?
Click to expand...
Click to collapse
Should work on all ale-l21.
Audriuskins said:
Should work on all ale-l21.
Click to expand...
Click to collapse
excuse me,
do you know where to find the vendor file for emui 4.1 ? , I've installed b896 on my dual sim l21 but it shows that there is no vendor file
or it's not needed in this version ?
salembream said:
excuse me,
do you know where to find the vendor file for emui 4.1 ? , I've installed b896 on my dual sim l21 but it shows that there is no vendor file
or it's not needed in this version ?
Click to expand...
Click to collapse
Try to flash this file https://yadi.sk/d/vxXXNOxss6hjK it worked till B600 haven't yet tested it on B896 but mostly it will work
Hello. Someone can share files from product/etc/camera folder? L21 version is needed.
storfiskur said:
Hello. Someone can share files from product/etc/camera folder? L21 version is needed.
Click to expand...
Click to collapse
What do you need it for?
Jan.Pul said:
What do you need it for?
Click to expand...
Click to collapse
I changed my phone's firmware from l21 to al10 and the wide aperture mode stopped working. I think the config files from the l21 firmware can help.
storfiskur said:
I changed my phone's firmware from l21 to al10 and the wide aperture mode stopped working. I think the config files from the l21 firmware can help.
Click to expand...
Click to collapse
Probably just need to flash the product image
Release date : January 13 2019
[ Chinese test stable firmware 7.2.0.0A ]
Caution : In the post links are attached to the incremental update. Installation is possible only through Recovery, strictly on the previous stable firmware: 7.1.5.0A
Get It From Here
https://download.meizu.com/Firmware...1221042139-20190112172856/4ffee559/update.zip
Give reviews as comments if you have any.
Do Not Forget To Press Thanks If You Like It
Regards
does nfc works? it doesnt for me in A factory and 7.1.5A i hope its not my phone it was bought as global btw
ChocholateMaster said:
does nfc works? it doesnt for me in A factory and 7.1.5A i hope its not my phone it was bought as global btw
Click to expand...
Click to collapse
If the problem is faced only on your phone, create a thread on flyme forumn to receive solutions.
adarshm4you said:
If the problem is faced only on your phone, create a thread on flyme forumn to receive solutions.
Click to expand...
Click to collapse
you say in other thread it works only with meizu pay so that means it might be working but cant be used for NFC tools?
oh and when i try updating it says firmware not found
yes i have 7.1.50A and im trying through recovery
ChocholateMaster said:
you say in other thread it works only with meizu pay so that means it might be working but cant be used for NFC tools?
oh and when i try updating it says firmware not found
yes i have 7.1.50A and im trying through recovery
Click to expand...
Click to collapse
You copied file to internal storage ?
If it's is not the problem, try installing by clicking directly from internal storage. If still install not starting, the download mighy gone corrupted.
adarshm4you said:
You copied file to internal storage ?
Click to expand...
Click to collapse
boot phone to recovery connect to pc copy file and click start
ChocholateMaster said:
boot phone to recovery connect to pc copy file and click start
Click to expand...
Click to collapse
Read abow edit.
download was corrupted :s downloaded again and did same thing through recovery now its upgrading tnx
ChocholateMaster said:
download was corrupted :s downloaded again and did same thing through recovery now its upgrading tnx
Click to expand...
Click to collapse
:good:
Gcam is possible to work on this phone, I use 7.2.0.0A.
dfoust said:
Gcam is possible to work on this phone, I use 7.2.0.0A.
Click to expand...
Click to collapse
Yeah,since we have exynos 8890.
Hi guys, so my RNE-L21 is stuck on logo, boot loader is locked and doesn't have custom recovery. updated to 8.0.0.355 and I cant find the stock rom with this build number anywhere. any help will be appreciated. is there any stock rom I can flash?
Huawei Mate 10 Lite RNE-L21 hw meafnaf Rhone-L21 8.0.0.335(C185CUSTC185D1) Firmware 8.0.0 r1 EMUI8.0 05014TCK BY www.needromarab.com.zip
drive.google.com
Astral said:
Huawei Mate 10 Lite RNE-L21 hw meafnaf Rhone-L21 8.0.0.335(C185CUSTC185D1) Firmware 8.0.0 r1 EMUI8.0 05014TCK BY www.needromarab.com.zip
drive.google.com
Click to expand...
Click to collapse
that probably won't help him, he needed 8.0.355.
Among other things, why do you think its region is C185?
-Alf- said:
that probably won't help him, he needed 8.0.355.
Among other things, why do you think its region is C185?
Click to expand...
Click to collapse
Yeah I sent the wrong link. pretty sure I had the 355 version link but I lost it.
Astral said:
Yeah I sent the wrong link. pretty sure I had the 355 version link but I lost it.
Click to expand...
Click to collapse
I think the questioner has already solved this . His post is one year old...
Btw, 8.0.0.355 is available for C10 and C185 using Firm Finder.
Hey @-Alf- , can I upgrade my RNE-L21C432 to Oreo manually using files from Firm Finder?
If so, how? Thanks!
Fjord1 said:
Hey @-Alf- , can I upgrade my RNE-L21C432 to Oreo manually using files from Firm Finder?
If so, how? Thanks!
Click to expand...
Click to collapse
Hello,yes you can. Download all 3 files and rename them.
The principle of the procedure can be found here:
https://forum.xda-developers.com/t/...0-0-046-070f-emui-8-0-0.4324543/post-85538623
Use TWRP for Nougat:
Link
-Alf- said:
Hello,yes you can. Download all 3 files and rename them.
The principle of the procedure can be found here:
https://forum.xda-developers.com/t/...0-0-046-070f-emui-8-0-0.4324543/post-85538623
Use TWRP for Nougat:
Link
Click to expand...
Click to collapse
Thank you very much! I now have HuRu for both 5.1 and 8.0 on SD Card, so I can easily switch between N and O .
-Alf- said:
I think the questioner has already solved this . His post is one year old...
Btw, 8.0.0.355 is available for C10 and C185 using Firm Finder.
Click to expand...
Click to collapse
I didn't use the huru updater method because I thought dload version was safer. I guess I have to use this now that I don't have access to the service rom.
Btw, I have a question I tried LeaOS ( and some other gsis like dotOS and AOSP) on my RNE-L21 8.0.0.348 (c185). But there were bugs I couldn't fix like storage issues ( bluetooth can send but can't recieve files, mega app saying file system problem) and GPU issues (Games are laggy compared to stock)
Do you think there's a possibility for it to be fixed by trying a higher firmware version (8.0.0.355) or should I try lower versions (like 8.0.0.310) or it doesn't matter?
I have little experience with custom ROMs on the RNE model, MORFUZ 4.5 was the best for me.
GSI Havoc 2.9 might be worth a try...
Astral said:
Do you think there's a possibility for it to be fixed by trying a higher firmware version (8.0.0.355) or should I try lower versions (like 8.0.0.310) or it doesn't matter?
Click to expand...
Click to collapse
On some models it helps to solve problems with wi-fi, RIL or BT, I don't know how it is with RNE.
Astral said:
I don't have access to the service rom.
Click to expand...
Click to collapse
Link1
Link2
-Alf- said:
I have little experience with custom ROMs on the RNE model, MORFUZ 4.5 was the best for me.
GSI Havoc 2.9 might be worth a try...
On some models it helps to solve problems with wi-fi, RIL or BT, I don't know how it is with RNE.
Link1
Link2
Click to expand...
Click to collapse
I was talking about 8.0.0.355 service rom but thanks for the help.
Astral said:
I was talking about 8.0.0.355 service rom but thanks for the help.
Click to expand...
Click to collapse
Yes, I forgot you have .335, sorry.
-Alf- said:
GSI Havoc 2.9
Click to expand...
Click to collapse
Can you give me a link? Thanks!
Fjord1 said:
Can you give me a link? Thanks!
Click to expand...
Click to collapse
https://forum.xda-developers.com/t/havoc-os-not-loading.4176099/post-83728065