Database Users

[Q] Recovery booting... set warranty bit: recovery - Boot loop!!

Help me!
I innstalled cmw and used the Quick Boot (Reboot) app to boot it into recovery. The phone was turned of and it come:
Recovery booting:
set warranty bit : recovery
And this screen keeps looping and i cant even enter recovery mod once the phone turns on it shows me that and it keep looping auto reboot same screen...
My phone is Samsung galaxy note 3 SM-N9005
Update: I got into download mod and boot it normaly. But why doesent i get into recovery mode?
Some solution?
Sorry for my bad english

Make sure you flash the correct version either for 4.4.2 and 4.3
Sent from my SM-N9005 using Tapatalk

i need emergency help to my constant recovery boot loop without any recovery mode.

hello, i think i just bricked my note 3. i accidentally boot the phone into the recovery mode on my sm-n9005 singapore lte version.
i downloaded this application called Quick Boot (Reboot) by GHCV on google play store. upon opening up the application and selecting the "Recovery" mode, it rebooted my phone into the recovery mode but there is a problem. it keep on saying: "Recovery is not SEandroid enforcing set warranty bit: recovery" and it constantly stuck in the recovery boot loop ever since then till now. my note 3 sm-9005 5.0 version is rooted by kingo root. i tried to install TWRP into my note 3 but failed, on the odin 10.7 it showed that it is successful but on my phone it doesn't even go into TWRP recovery mode. i tried these steps but all failed: pull out battery then press volume down, power button and home button for awhile then put in battery; boot it into download mode then press volume down to restart but still it brings me to recovery boot loop. i cannot even go and hardware reset my phone anymore. please help me i need my this phone urgently as this is my every day phone. i didnt flash CWM too as i ran out of time. please reply me as soon as possible to my email [email protected] thanks. urgently needed help.

mastermind_tan said:
hello, i think i just bricked my note 3. i accidentally boot the phone into the recovery mode on my sm-n9005 singapore lte version.
i downloaded this application called Quick Boot (Reboot) by GHCV on google play store. upon opening up the application and selecting the "Recovery" mode, it rebooted my phone into the recovery mode but there is a problem. it keep on saying: "Recovery is not SEandroid enforcing set warranty bit: recovery" and it constantly stuck in the recovery boot loop ever since then till now. my note 3 sm-9005 5.0 version is rooted by kingo root. i tried to install TWRP into my note 3 but failed, on the odin 10.7 it showed that it is successful but on my phone it doesn't even go into TWRP recovery mode. i tried these steps but all failed: pull out battery then press volume down, power button and home button for awhile then put in battery; boot it into download mode then press volume down to restart but still it brings me to recovery boot loop. i cannot even go and hardware reset my phone anymore. please help me i need my this phone urgently as this is my every day phone. i didnt flash CWM too as i ran out of time. please reply me as soon as possible to my email [email protected] thanks. urgently needed help.
Click to expand...
Click to collapse
Home-Volume Down-Power = Download Mode
Home-Volume Up - Power = Recovery Mode
You'll need to flash the Bootloader and Recovery. It may start up at this point. If not, then flash the Singapore ROM. You can extract the bootloader and recovery and then make them a .tar .md5 file for Odin. Read about it HERE. I've used it to recover my Canadian SM-N900W8 Note 3. All it would do was vibrate and boot loop. Now I'm 100% back up and running in Lollipop. Only use files for your version of the Note 3.
http://www.sammobile.com/firmwares/database/SM-N9005/
Singapore has 4 cell providers to choose from.
Or
you can try using Samsung Kies . Tools > Emergency Firmware Recovery. You'll need the serial # under your battery.

Or you just flash this one https://idlekernel.com/twrp/3.0.0-0/twrp-3.0.0-0-hlte.tar.md5 by Odin on the AP slot. If you really have a SM-N9005 like me (No other strange SM-N900* one!) this will work and fix your loop by updating the bricked recovery to the most recent TWRP one. Here is more information I'd recommend to at least read a bit of to at least understand a bit what you are installing by that: http://forum.xda-developers.com/showthread.php?t=2467001
ODIN 3.09 for ya: http://androidhost.org/PVAIv (using old crap 1.85 is NOT NEEDED)

Recovery is not seandroid enforcing

Hello everyone, I would like your help.
I tried to make my friend A Ricovery twrp and Root installation.
Odin process works properly, and finally the device Restart itself again - but !!
After I shut off the galaxy and try to enter Ricovery it shows the screen of Samsung and more addresses following lines:
RECOVERY BOOTING ...
RECOVERY IS NOT SEANDROID ENFORCING
Warranty Bit Set: Recovery
Each line in a different color
After waiting for about 10 to 20 seconds, the device shuts down and reboots itself as normal - and so the story repeats itself again.
I looked at XDA endless possibilities, I plowed Google and just have not found a solution.
If it is important to know, when he go to the Download Mode it Write in Chinese, and I understand it not supposed to be this way,and it should be written in English.
His device type is G900F, and is now on Android 5, and he really wants to install Android 6 with root and ricovery
Please Help!

some news regarding??
Hi all,
I've the some problem. Can you please help us? Thanks to all

Maybe you flashed a wrong Root or a wrong Recovery.
when you flash a recovery for exemple TWRP, it"s normal to see those :
RECOVERY BOOTING ...
RECOVERY IS NOT SEANDROID ENFORCING
Warranty Bit Set: Recovery
but the phone must boot up normally after that.
and if you flashed a Root like CF Auto Root, you will see this in yellow at the top of the screen ahead Samsung Galaxy S5 :
Warranty Bit Set: Recovery
and again the phone must boot up normally.
You have to find a way to restore the stock Recovery and to delete the Root.
Or just flash a Stock Recovery and try to do Wipes and flash an Official ROM.

What Have I done.... Soft Bricked A7G

Hello All
I have problem with my Axon7 G. I had 8.00 version installed and tried to make a system write option with using a method mentioned in
Official (Beta) Android 8.0.0 V1.30B01 EU Version by NFound thread. I flashed zip mentioned in this tread -ZTE_A7_UniversalBootStack.
Then restart devices and...whats happened....soft (or hard) bricked my phone!!!!!
1. After restart i had a standard warning about unlocked bootloader with yellow fonts . After 5 sec yellow fonts changed into red and wrote my device is corrupt...
2 using vol down i can enter into bootloader mode - then i can choose option like fastboot, recovery,restart and power off.
- pressing recovery and restrt , phone restart and again boot into bootloader mode with option above (cant get into twrp or stock recovery mode)
-pressing fastboot i can enter into this mode .
3 . Use fastboot mode to flash recovery and boot ( fastboot flash recovery recovery.img and fastboot flash boot boot.img)
everything seems ok but...nothing changed , i cant boot into recovery -twrp or stock. Still go back after restart to bootloader menu
4. edl mode.....i can`t enter . Use vol + and vol- and power button then after 3 sec phone went black screen with red light upper left. Applications cant recognize phone in this mode...
somene can help me ???

I also get the warning but I can just continue with the boot. I can't access recovery however. Don't know hot to fix that.

Ok I did this. A7 is working )
I flashed this via fastboot flash file: A2017G_B06_NOUGAT_STOCK_FASTBOOT_EDL.zip then i went into twrp and everything works

Antistar said:
Ok I did this. A7 is working )
I flashed this via fastboot flash file: A2017G_B06_NOUGAT_STOCK_FASTBOOT_EDL.zip then i went into twrp and everything works
Click to expand...
Click to collapse
did you manage to get the error message away?
I got it recently after installing LOS 15.1, but for me everything works fine .
I'm just afraid if the device randomly reboots at night my alarm won't go off in the morning since it's the device is shutting itself down after the 30 second warning.
If you've fixed this can you please detail me through the steps.

Set Warranty Bit: Recovery and Set Warranty Bit: Kernel

Hello,
A few months ago my younger brothers SM-G900I had the classic problem of receiving an update that resulted in the device booting the displaying "Set Warranty Bit:Kernel."
Recently my brother asked me to try fix it. When I tried to boot to recovery mode to fix this I saw the normal "Booting recovery mode" but below that I also saw "Set Warranty Bit: Recovery," This then results in recovery mode not booting and going back to the normal black screen and nothing happening ordeal.
At the time of this happening I have been told by my farther that he booted into recovery mode and did a full system wipe
After doing that wipe the phone hasn't since booted into Recovery mode, I believe that there's nothing I can do to fix the phone due to Recovery mode not booting which means I can't use ODIN to fix the "Set Warranty Bit:Kernel" as I can't go into download mode.
If there is anything I can do please let me know many thanks, Xavier1501

ODIN is separate from recovery, and you don't need to launch it from recovery.
Vol up + Home + Power = Recovery
Vol down + Home + Power = ODIN