When every i try lock and relock my bootloader i cant because fastboot says stat not match i cannot do anything i tried flashing mm but it says command not allowed and i cant lock my boot loader and unlock it to allow it how can i get past this? Adb cannot see muly phone i cant boot into twrp and i only have access yo fastboot mode as erecovery didnt work with my un offical nrd90m update.
I messed up.
Flashed LineageOS 14.1,
Forgot to flash gaaps,
Afterward, for some reason could not enter TWRP and in 'Developers Options ' there was no option to OEM Unlock so I could not do 'fastboot flash recovery recovery.img' to regain TWRP.
tried to use the 'dload' method to return to stock 6.0.
message said uptade successful.
The phone now does not boot, does not enter erecovery, does not enter the updater (Power Button+Vol. Up+Vol. Down)
Only thing it does is enter fastboot (it says PHONE Unlocked and FRP Lock).
Can you help me?
Edit 1 : In fastboot mode only commands with fastboot work, no adb.
Because it is a Huawei the command 'fastboot oem unlock' does not work.
Edit 2 :Tried to 'fastboot flash system sistem.img' to flash the system.img from the update.app of stock android, unfortunately with the phone OEM Locked there is very little I can do with fastboot.
If anyone can direct me to a fastboot friendly update.zip that has the android-info.txt that seems to be required for for flashing I would apreciate it. (I have read that you can flash google-signed update.zip's while having OEM Lock)
Edit 3 : Looking through XDA I have found user with a similar issue to mine that have been able to enter recovery update after either letting the batery run dry or using fastboot to erase/format userdata and cache, the result for me is again 'FAILED (remote: Command not allowed)'.
Will be sending the P9 to Huawei and see what they can do with this.
Edit 4 : Huawei replaced the board and the battery (apparently it died during the trip to the repair center) they accepted the warranty despite the fact the phone was stuck on the warning screen that said the phone was unlocked.
Hi, if you guys have any tips for me, would be really appreciated.
I actually wanted to lock my bootloader again, + flash my stock firmware so that my p10 was as good as new.
I re-locked the bootloader with the following commands :
adb reboot bootloader
fastboot oem unlock [unlock code]
After that i rebooted to trwp recovery, and I did a factory reset / wipe cache
And it worked in the fastboot menu is phone now relocked.
After that i did a factory reset and wiped cache etc. ( Because i was 100% sure i've made an backup except can't find it anywhere )
So now my device can only boot into FASTBOOT & Rescue mode, In ADB Most commands are not working & Recovery menu i get erecovery which wants me to restore via wifi and it fails everytime.. Recovering via hisuite also doesn't work
If you got help would be really appreciated!
I was runnng VKY-L09C432B150
I still have my unlockcode but can't do anything with it!
Tips would be really appreciated thanks!
i was flashing custom roms.
due to factory reset phone got in frp lock.
i was trying to unlock it. no luck.
right now its booting in erecovery & phone lock is enabled & frp is also enabled.
on stock recovery
what to do
tried fastboot oem unlock [code]
but command failed
liboct87 said:
i was flashing custom roms.
due to factory reset phone got in frp lock.
i was trying to unlock it. no luck.
right now its booting in erecovery & phone lock is enabled & frp is also enabled.
what to do
tried fastboot oem unlock [code]
but command failed
Click to expand...
Click to collapse
You must have stock recovery...
A booting system..
Your bootloader unlock code...
Make sure you can boot to your system first:
1.Do a factory reset using stock recovery
2. immediately after doing the factory reset go to bootloader and relock your bootloader
fastboot oem relock xxxxxxxxxxxxxxxx
3. Boot to your system and go to developers options and enable oem unlocking
If you try to use TWRP for the factory reset you will brick your device
It has to be the stock recovery.
Sent from my PRA-LA1 using Tapatalk
hamzio7 said:
You must have stock recovery...
A booting system..
Your bootloader unlock code...
Make sure you can boot to your system first:
1.Do a factory reset using stock recovery
2. immediately after doing the factory reset go to bootloader and relock your bootloader
fastboot oem relock xxxxxxxxxxxxxxxx
3. Boot to your system and go to developers options and enable oem unlocking
If you try to use TWRP for the factory reset you will brick your device
It has to be the stock recovery.
Sent from my PRA-LA1 using Tapatalk
Click to expand...
Click to collapse
phone was on stock recovery. & its only boot into erecovery ..
tried dload method too
its not resetting
liboct87 said:
phone was on stock recovery. & its only boot into erecovery ..
tried dload method too
its not resetting
Click to expand...
Click to collapse
erecovery and dload mode are not useful in this situation...you can use DC PHOENIX alternatively
Sent from my PRA-LA1 using Tapatalk
hamzio7 said:
erecovery and dload mode are not useful in this situation...you can use DC PHOENIX alternatively
Sent from my PRA-LA1 using Tapatalk
Click to expand...
Click to collapse
just got my device working via erecovery.
but it shows on fastboot phone relocked & FRP locked
liboct87 said:
just got my device working via erecovery.
but it shows on fastboot phone relocked & FRP locked
Click to expand...
Click to collapse
Now you have to boot to the system and re enable the OEM unlocking (frp)
And reunlock the bootloader
Sent from my PRA-LA1 using Tapatalk
liboct87 said:
just got my device working via erecovery.
but it shows on fastboot phone relocked & FRP locked
Click to expand...
Click to collapse
Thank you hamzio7 ...
you always here to help...
God bless you
hamzio7 said:
Now you have to boot to the system and re enable the OEM unlocking (frp)
And reunlock the bootloader
Sent from my PRA-LA1 using Tapatalk
Click to expand...
Click to collapse
my device is in bootloop... how can i unlock frp, without booting the device... is it possible.
moh.abusufiyan said:
my device is in bootloop... how can i unlock frp, without booting the device... is it possible.
Click to expand...
Click to collapse
No... you need to go to developer options and disable frp
Sent from my PRA-LA1 using Tapatalk
FRP Unlock Not working
hamzio7 said:
You must have stock recovery...
A booting system..
Your bootloader unlock code...
Make sure you can boot to your system first:
1.Do a factory reset using stock recovery
2. immediately after doing the factory reset go to bootloader and relock your bootloader
fastboot oem relock xxxxxxxxxxxxxxxx
3. Boot to your system and go to developers options and enable oem unlocking
If you try to use TWRP for the factory reset you will brick your device
It has to be the stock recovery.
Sent from my PRA-LA1 using Tapatalk
Click to expand...
Click to collapse
When i tried to unlock FRP then it's say FAILED (remote: stat not match)
finished. total time: 0.016s
so now what can i do ?
hi,i have honor 8 lite pra_la1 with phone locked and frp locked status,i can only put my phone in fastboot mode can,t enter in recovery or erecovery.how can i unlock its frp and bootloader?its stuck on honor logo.
i have used honor 8 lite mobile since for a while, one day i decided to install a custom rom on it. After installing the custom rom successfully, i again tried to install stock rom. but it fails. Now im in a delama.The bootloader is now unlocked. but the frp is locked. i cannot even install twrp recovery due to this. can anyone help me for to find a solution. From where WE get the frp unlock key frNDZZ.plzzz helpppp . CAN ANYONE can provide the links to obtain the code.... there is no logo can be seeen in my phone. and i cannot even do the factory reset.
http://ministryofsolutions.com/2017...e-pra-al00-convert-international-version.html
I used this guide to try and rebrand it to the international version because of Google play services. I unlocked the bootloader and flashed twrp and then flashed the oeminfo as said and I put the dload to the root of my SD card. Now the phone tries to boot but goes straight to factory reset and it always gets stuck at 99%. I can boot to fastboot but phone and frp show as locked, I still have the key for the bootloader unlock and I try it and it says command not allowed when I try to fastboot flash recovery .
Jaimesco12 said:
http://ministryofsolutions.com/2017...e-pra-al00-convert-international-version.html
I used this guide to try and rebrand it to the international version because of Google play services. I unlocked the bootloader and flashed twrp and then flashed the oeminfo as said and I put the dload to the root of my SD card. Now the phone tries to boot but goes straight to factory reset and it always gets stuck at 99%. I can boot to fastboot but phone and frp show as locked, I still have the key for the bootloader unlock and I try it and it says command not allowed when I try to fastboot flash recovery .
Click to expand...
Click to collapse
In fastboot again unlock your phone and flash sytem recovery and other files using fastboot