Hi, if you guys have any tips for me, would be really appreciated.
I actually wanted to lock my bootloader again, + flash my stock firmware so that my p10 was as good as new.
I re-locked the bootloader with the following commands :
adb reboot bootloader
fastboot oem unlock [unlock code]
After that i rebooted to trwp recovery, and I did a factory reset / wipe cache
And it worked in the fastboot menu is phone now relocked.
After that i did a factory reset and wiped cache etc. ( Because i was 100% sure i've made an backup except can't find it anywhere )
So now my device can only boot into FASTBOOT & Rescue mode, In ADB Most commands are not working & Recovery menu i get erecovery which wants me to restore via wifi and it fails everytime.. Recovering via hisuite also doesn't work
If you got help would be really appreciated!
I was runnng VKY-L09C432B150
I still have my unlockcode but can't do anything with it!
Tips would be really appreciated thanks!
Related
Hello all,
I tried to root my phone using the twrp-3.0.2-0-taido.img recovery.
I was using the following commands:
Code:
PS C:\Users\username> fastboot flash recovery C:\Users\username\Downloads\twrp.img
PS C:\Users\username> fastboot reboot bootloader
Or
PS C:\Users\username> fastboot reboot-bootloader
N.B. My OEM was already unlocked.
However, everytime I tried to reboot from the fastboot I got this message:
Code:
PS C:\Users\username> fastboot reboot bootloader
rebooting into bootloader...
FAILED (remote: not support on security)
Also, I could not just reboot from the power or volume button so I removed the battery. And when going to the recovery got nothing just normal boot multiple times.
So I tried this commad, as I was in a rush to root the phone for my work:
Code:
PS C:\Users\username> fastboot.exe boot C:\Users\ares\Downloads\twrp.img
I reckon that the above command could be responsible of the mess. Now, I am stucked at the Moto boot image screen (loop).
If anyone could help me it would be a life saver.
P.S: I do not have access to the recovery and I am unable to flash a new one.
EDIT: I finally installed the TWRP recovery properly, the issue was that I tried to install the wrong recovery. Now, I just need to fix the boot partition messed up by the command:
I guess that I now need to find the proper boot.img for Motorola Moto E3 Power XT1700 (my model) and boot on it, right?
Any idea?
Thanks
Try to restore nandroid backup from this post
BTW, Moto E3 Power is XT1706. XT1700 is the 'normal' Moto E3.
how did you install the correct one ive tried and still no joy in accessing twrp
Hi everybody
My Zenfone Selfie after a normal update (never modified) is in bootloop.
So I installed adb and fastboot and I flashed the twrp.
Then I tried in every way to flash a rom. I've tried both with official firmware and with various versions of cyanogenmod. Through fastboot and via adb sideload.
Even if seems to work, when I reboot I get the bootloop problem again.
As far as I can understand the problem it’s that I have the bootloader still locked. The official apk solution I guees it’s not applicable in my case. By fastboot oem unlock i get an error message (probably why i can not enable usb debug).
Do you know of other ways to unlock the bootloader or in general to flick my phone?
Thanks to everyone for the help
Here is a link for selfie's boot, recovery and system images for fastboot flashing
https://mega.nz/#F!Ao1RjT7D!hQ5x60r02WveB9-Hl32B4g!810z0DoQ
You can't unlocked bootloader on fastboot. I hope you can restore your device.
24imelqui said:
Here is a link for selfie's boot, recovery and system images for fastboot flashing
https://mega.nz/#F!Ao1RjT7D!hQ5x60r02WveB9-Hl32B4g!810z0DoQ
You can't unlocked bootloader on fastboot. I hope you can restore your device.
Click to expand...
Click to collapse
i tried evrything from flashing stock image , recovery partition , boot image . but nothing works. same i dont have unlocked bootloader. i am stuck at just rebooting phone. please help
Is there any way to unlock frp from the fastboot if the bootloader is unlocked and the device is bricked.
Already tried : fastboot oem relock xxxxx
Returns : command not allowed
I am on stock recovery and the device is bricked right now.
Help needed!Many thanks!
dload method..
I have this problem before
reset factory Your phone with Power and volume up and when reset complete Go directly To Fastboot if ypu Go to menu Your Phone didn't work
Dload does not work
I Cant reset as i cant go to the stock recovery.i can go to erecovery instead but it does any option to reset.
Hi,
my phone is almost brick.. i cannot boot to system.. it stays freeze on zte log. I guess this is happen because my device is lock.. i forget to enable OEM Unlock, and now i i've wipe data and system from the phone, so i can't do it normally, when trying to fastboot oem unlock it says not allowed..
I manage to install twrp 3.0.2 (other don't work...i get black screen) via edl using axon7tool-1.5-linux.
From twrp I flash the stock room but no luck..
so my question is that if it's possible to enable oem unlock from adb? or any other tip to recover my device...
After flashing stock room, using the stock recovery i try to sd update, but i says: "sorry, you can't sdcard upgrade".
My device is the model A2017G
The info in original recovery:
ZTE/P996A04_N/ailsa_ii
7.1.1 / NMF26V/20180209.113940
Thanks for the help!!
Regards,
Hello, i just bought this TAP and its encryption data with pin android start. even when i do factory reset and wipe all data or downgrade the firmware to "TB-X704L_S000035_170703_ROW_QFIL" and make wipe data same problem.
so how i can erase this config on the emmc.. all mode adb / fastboot / download are ok
any suggestion
thnaks
OK I solved. with my way..
1- i replace twrp recovery in the last firmware 56 and flashed it with QFIL
2- i pass the encrypting page.. turn on usb debug and OEM unlock.
3-boot in fastboot
4-unlock bootloader "fastboot oem unlock-go"
5-after erase and first install come back the encrypting
6-inter fastboot mode and boot twrp "fastboot boot twrp.img"
7-root with supersu zip
8-after reboot go back fastboot and boot again No6
9-in twrp wipe data
10 reboot.
thats all.