[Help]Le2-TWRP-Internal storage shows as 0 mb - LeEco Le 2 Guides, News, & Discussion

Dear All,
I am facing a problem in my attempt to use TWRP in my Le2 x526 device.
When I flash TWRP recovery image via adb and connect le2 to my laptop while in recovery mode...my device is not detected at all. Tried installing all related drivers after googling...no help! Pls note that internal storage shows properly in TWRP.
After that, whenever i enter recovery mode, internal storage shows as 0 mb
so, basically even though i got TWRP installed...its of no use...i cannot flash anything :crying:
Please help me guys.

Anyone to help me pls?
victim of two issues basically:-
a. le2 not show in my PC while in recovery mode
b. internal storage shows as 0 mb in TWRP

onlytanmoy said:
Anyone to help me pls?
victim of two issues basically:-
a. le2 not show in my PC while in recovery mode
Click to expand...
Click to collapse
May be a Windows driver problem.
b. internal storage shows as 0 mb in TWRP
Click to expand...
Click to collapse
Does it ask for a password, when booting to twrp?

JamBax said:
Does it ask for a password, when booting to twrp?
Click to expand...
Click to collapse
Thanks for your response.
When I first run the below command
fastboot flash recovery recovery.img
i additionally ran the below cmd too
fastboot format userdata (i guess thats why it did not prompt for pwd)
and reboot to recovery...it doesn't prompt for pwd, also internal storage shown properly.
After that when I format the data, and reboot to system and then when i enter recovery for the 2nd time, it prompts for password and the 0 mb internal storage issue occurs.

First u revert back to stock recovery from here
https://www.google.co.in/amp/s/foru.../leeco-le-2-x526-stock-recovery-t3449208/amp/
Then do a wipe from recovery
And now just install latest TWRP only using following command
Fastboot flash recovery recovery.img
Now unplug ur device and boot to recovery mannually by pressing power and vol up button
Now do a wipe from here. Now u will be ae to see the partitions correct.

djdeve said:
Now unplug ur device and boot to recovery mannually by pressing power and vol up button
Now do a wipe from here. Now u will be ae to see the partitions correct.
Click to expand...
Click to collapse
When you say wipe.. Do you mean wipe -- format data by typing yes thing?

onlytanmoy said:
When you say wipe.. Do you mean wipe -- format data by typing yes thing?
Click to expand...
Click to collapse
Yes, the yes thing is necessary to create a non crytped data partition, because that is the reason twrp asks for a password.

Your internal storage is encrypted
onlytanmoy said:
Dear All,
I am facing a problem in my attempt to use TWRP in my Le2 x526 device.
When I flash TWRP recovery image via adb and connect le2 to my laptop while in recovery mode...my device is not detected at all. Tried installing all related drivers after googling...no help! Pls note that internal storage shows properly in TWRP.
After that, whenever i enter recovery mode, internal storage shows as 0 mb
so, basically even though i got TWRP installed...its of no use...i cannot flash anything :crying:
Please help me guys.
Click to expand...
Click to collapse
Swipe factory reset in wipe data..Your card will be formatted then it will open...else use otg

Related

[Q] wipe system without backup...

i wiped my g2's system with twrp and now it's stuck. i can only access twrp recovery menu and if i want to restart phone i get the lg logo and that's all. I don't have any other ROM or software on my internal storage... what can i do? please help
Use the ADB sideload feature in TWRP to flash a ROM from the command prompt on your PC.
redduc900 said:
Use the ADB sideload feature in TWRP to flash a ROM from the command prompt on your PC.
Click to expand...
Click to collapse
thanks but could you explain me how to do that? i'm an amateur in this...
solved. i just put my g2 on download mode and flash to a .kdz file.

os not installed fix !!

can someone help me please, i have tried to install cm13, and i did a clean wipe, now it is saying no os installed, and i couldnt even find the restore package !!! how can i load os into my oneplus two, as yo all knw we dont have a external memory card, am nt sure how to load os into phone now !!! some please help !!
devveda said:
can someone help me please, i have tried to install cm13, and i did a clean wipe, now it is saying no os installed, and i couldnt even find the restore package !!! how can i load os into my oneplus two, as yo all knw we dont have a external memory card, am nt sure how to load os into phone now !!! some please help !!
Click to expand...
Click to collapse
Are you on TWRP 3.0.x.x?
If yes, then go to Mount Section, enable MTP.
Connect to your PC, transfer desired ROM.zip and flash.
If no TWRP, then reboot to BootLoader/Fastboot
Download latest TWRP from official website, then flash it using command:
fastboot flash recovery twrp.img
fastboot reboot (keep holding vol- to enter TWRP)
where "twrp.img" is name of the recovery file.
WhyOrean said:
Are you on TWRP 3.0.x.x?
If yes, then go to Mount Section, enable MTP.
Connect to your PC, transfer desired ROM.zip and flash.
If no TWRP, then reboot to BootLoader/Fastboot
Download latest TWRP from official website, then flash it using command:
fastboot flash recovery twrp.img
fastboot reboot (keep holding vol- to enter TWRP)
where "twrp.img" is name of the recovery file.
Click to expand...
Click to collapse
yes i tried to enable mtp, but nothing was shown in computer to transfer !!!
thank god used sideload and installed stock rom, its fine and all set nw !!!!
devveda said:
yes i tried to enable mtp, but nothing was shown in computer to transfer !!!
Click to expand...
Click to collapse
Try with Latest TWRP build.
And at worst case scenario use Qualcomm Recovery Tool to go back to OOS 2.1.1, as already you have lost all your data.
---------- Post added at 12:19 PM ---------- Previous post was at 12:18 PM ----------
devveda said:
thank god used sideload and installed stock rom, its fine and all set nw !!!!
Click to expand...
Click to collapse
Oki Good, Enjoy!
Can you help me with something? When I again try to reboot my device in recovery I couldn't find the twrp recovery or any type of recovery, after installing the twrp, it's not rebooting, am getting a message saying "booting.... Failed <remote: dth not found>, I couldn't install twrp recovery can u help me with this?

Lenovo K6 without OS

Hi, I already had my phone rooted and with TWRP installed, but I needed to restore my phone. First I did this trough the system, but I noted that a lot of old files still were there, and I went to TWRP and did a wipe, but selected /system and /cache, now I don't have a OS on my phone.
The phone doesn't turn off, everytime I try to power off, he turn on again, and stay on Lenovo logo. The only thing I can acess is Fastboot mode (via Power down + power), I cant acess TWRP trough the phone, but I found a .bat file, that when I'm in fastboot mode, it flashes twrp on my phone and I can acess it . The other problem is that I always get an error when trying to flash any rom. Things like Error:255 or ".zip file not valid". Tried 2 roms and nothing.
Can someone please help me? I would prefer a stock rom for Brazil, but now I just want any rom, dont even mind if it's not stock.
Crolys said:
Hi, I already had my phone rooted and with TWRP installed, but I needed to restore my phone. First I did this trough the system, but I noted that a lot of old files still were there, and I went to TWRP and did a wipe, but selected /system and /cache, now I don't have a OS on my phone.
The phone doesn't turn off, everytime I try to power off, he turn on again, and stay on Lenovo logo. The only thing I can acess is Fastboot mode (via Power down + power), I cant acess TWRP trough the phone, but I found a .bat file, that when I'm in fastboot mode, it flashes twrp on my phone and I can acess it . The other problem is that I always get an error when trying to flash any rom. Things like Error:255 or ".zip file not valid". Tried 2 roms and nothing.
Can someone please help me? I would prefer a stock rom for Brazil, but now I just want any rom, dont even mind if it's not stock.
Click to expand...
Click to collapse
Error 255 is caused because you are trying to install a 64bit ROM over TWRP (32bits), you need to upgrade TWRP to 64bit, just so you will be able to install a ROM. Remember that you should use Gapps in 64bit [ARM64]
TWRP: https://dl.twrp.me/karate/twrp-3.1.1-1-karate.img
Gapps: http://opengapps.org/ (ARM64)
J.D.M said:
Error 255 is caused because you are trying to install a 64bit ROM over TWRP (32bits), you need to upgrade TWRP to 64bit, just so you will be able to install a ROM. Remember that you should use Gapps in 64bit [ARM64]
Click to expand...
Click to collapse
I already had this version of twrp, but downloaded anyway and got the same error when tring to sideload a ROM "Updater process ended with ERROR: 255" . I don't know what to do anymore, I tried with 4 different ROMs, also I searched for a method to erase the lines with asserts on "update-scripts" in META-INF, but then I got a "Invalid ZIP file" error.
Crolys said:
I already had this version of twrp, but downloaded anyway and got the same error when tring to sideload a ROM "Updater process ended with ERROR: 255" . I don't know what to do anymore, I tried with 4 different ROMs, also I searched for a method to erase the lines with asserts on "update-scripts" in META-INF, but then I got a "Invalid ZIP file" error.
Click to expand...
Click to collapse
Try to go back to the 32bits version and erase everything and format the data and return to the 64bit version because here I had this problem it was because of the TWRP that I was using, it was the 32bits version, after that I upgraded to the 64bits version I did not have this problem. Remembering that in the site https://dl.twrp.me/karate/ has two versions of TWRP, the version twrp-3.1.1-0-karate.img is 32bits and the version twrp-3.1.1-1-karate. img is 64bit.
J.D.M said:
Try to go back to the 32bits version and erase everything and format the data and return to the 64bit version because here I had this problem it was because of the TWRP that I was using, it was the 32bits version, after that I upgraded to the 64bits version I did not have this problem.
Click to expand...
Click to collapse
Well, that kinda worked(?), now I have another error it says that my firmware is incompatible with the ROM version, and I need to update it (I dont know how to do this), and give me ERROR: 7 now
Crolys said:
Well, that kinda worked(?), now I have another error it says that my firmware is incompatible with the ROM version, and I need to update it (I dont know how to do this), and give me ERROR: 7 now
Click to expand...
Click to collapse
MAN, the ERROR: 7 now could be solved by deleting the lines with ASSERT in "\META-INF\com\google\android\updater-script".
So, thanks for helping me, the problem with 64/32bits worked. I'm really glad that this worked, had stuck for 3 days without OS, now i'm never messing with this stuff again haha.
Crolys said:
MAN, the ERROR: 7 now could be solved by deleting the lines with ASSERT in "\META-INF\com\google\android\updater-script".
So, thanks for helping me, the problem with 64/32bits worked. I'm really glad that this worked, had stuck for 3 days without OS, now i'm never messing with this stuff again haha.
Click to expand...
Click to collapse
I've been researching and was going to tell you to delete the above lines mentioned, I am glad you have succeeded.
got same 255 error,just now i reflashed stock rom and issue resolved
vasu009 said:
got same 255 error,just now i reflashed stock rom and issue resolved
Click to expand...
Click to collapse
how did you reflashed the stock rom, please reply cause im stuck with the twrp and unable to do it. my phone doesn't have an os now
what s the password of the trwp
J.D.M said:
I've been researching and was going to tell you to delete the above lines mentioned, I am glad you have succeeded.
Click to expand...
Click to collapse
Can install this ROM on any Lenovo K6 Power device ??
dushd95 said:
Can install this ROM on any Lenovo K6 Power device ??
Click to expand...
Click to collapse
Yeah
J.D.M said:
Yeah
Click to expand...
Click to collapse
It says device not supported why??
Dont forget to reboot again into twrp - after flashing 64bit twrp . This is a step that is very important if you will not reboot your phone into twrp after flashing 64 bit twrp then , it will keep showin you the error 255.
So check that .
wacccim said:
what s the password of the trwp
Click to expand...
Click to collapse
Go for 3.2.1.0 it is better then 3.1.1.1 in 64 bits it ain't ask password i use it to flash all roms
Tere 3.1.1-1 asking for password to encrypt data
I flashed my Lenovo k6 power with twrp 3.1.1-1 after I was not able to flash crdroid,lineage is,pixelized stock ROM to my phone. Now the twrp is asking for password to encrypt data and I am surprised because I hadn't set a password. I tried to unlock it with my phone password but I it is saying to enter correct password.
Please someone help me. I am not able to flash other things too please somebody help me.:
Erase the data
Shrestha Kumar said:
I flashed my Lenovo k6 power with twrp 3.1.1-1 after I was not able to flash crdroid,lineage is,pixelized stock ROM to my phone. Now the twrp is asking for password to encrypt data and I am surprised because I hadn't set a password. I tried to unlock it with my phone password but I it is saying to enter correct password.
Please someone help me. I am not able to flash other things too please somebody help me.:
Click to expand...
Click to collapse
Use erase the data from wipe option then you will be able to install rom and g-apps.
Every time you will need password, I don't know why but after erasing data you install all files otherwise you need to erase data again and again
Crolys said:
Hi, I already had my phone rooted and with TWRP installed, but I needed to restore my phone. First I did this trough the system, but I noted that a lot of old files still were there, and I went to TWRP and did a wipe, but selected /system and /cache, now I don't have a OS on my phone.
The phone doesn't turn off, everytime I try to power off, he turn on again, and stay on Lenovo logo. The only thing I can acess is Fastboot mode (via Power down + power), I cant acess TWRP trough the phone, but I found a .bat file, that when I'm in fastboot mode, it flashes twrp on my phone and I can acess it . The other problem is that I always get an error when trying to flash any rom. Things like Error:255 or ".zip file not valid". Tried 2 roms and nothing.
Can someone please help me? I would prefer a stock rom for Brazil, but now I just want any rom, dont even mind if it's not stock.
Click to expand...
Click to collapse
I Faced same problem. It's ok that your phone is in weird state for time now. And also possible to recover.
Hopefully you have adb-tool, custom-rom & gapp, twrp.img on your PC.
1) Boot your mobile in fastmode using Power ON with Volume down key for 5 sec (Lenovo log with left hand side sayinh fastboot mode)
2) Connect the mobile to PC using USB & Go to adb tool folder. Open command prompt in this folder & Execute the follow step by step execution
fastboot oem reboot-recovery
3)Wait for mobile to boot in to recovery mode with TWRP
Now need to flash custom-rom followed by gapps installion.
I) You can use pendrive with otg to flash custom-rom followed by gapps
OR
II)You can use phone storage/SD card to flash the custom-rom followed by gapps
OR
III)adb sideload command as fallow
a)In TWRP recovery on mobile, goto Adavanced->ADB Sideload & Swipe to start the sideload
Now on PC execute . Specify custom rom path inside ""
adb sideload "C:\adb\images\MyCustomROM.zip"
Have a patience to complete the operation.
Click back for Adavanced Menu again.
b) Select ADB Sideload & Swipe to start the sideload
Now on PC execute . Specify Gapp path inside ""
adb sideload "C:\adb\images\open_gapps-arm-7.1-pico-20180611.zip"
c)Have a patience to complete the operation.
Once complete go to TWRP Screen.
d)Now go back TWRP main menu & select wipe->format Data.
Go to Reboot->system.
How to install TWRP if no OS there
1) Boot your mobile in fastmode using Power ON with Volume down key for 5 sec (Lenovo log with left hand side sayinh fastboot mode)
2) Connect the mobile to PC using USB & Go to adb tool folder. Open command prompt in this folder & Execute the follow step by step execution
a) To check the device is connected to PC or not
fastboot oem device-info
b) To flash the recovery. Give twrp path inside the ""
fastboot flash recovery "C:\adb\images\twrp.img"
c) To boot into recovery mode
fastboot oem reboot-recovery
---------- Post added at 10:03 PM ---------- Previous post was at 09:57 PM ----------
[/COLOR]
Shrestha Kumar said:
I flashed my Lenovo k6 power with twrp 3.1.1-1 after I was not able to flash crdroid,lineage is,pixelized stock ROM to my phone. Now the twrp is asking for password to encrypt data and I am surprised because I hadn't set a password. I tried to unlock it with my phone password but I it is saying to enter correct password.
Please someone help me. I am not able to flash other things too please somebody help me.:
Click to expand...
Click to collapse
In my case, It worked with PIN.

Hard Bricked!

Hi,
My devices is stuck on Mi logo, it was not Bootloop, it cant reboot to EDL, sometimes my devices can go to Fasboot mode but sometimes cant, while in fastboot mode I check in the Device drivers section theres no Qualcomm blablabla but the only available is Android Bootloader Interface and when I try to flash my phone via Mi Flash Tool I cant because my devices is not detected, What should I do? :crying:
1. My device is already unlocked
2. Before this I was flashing RR, and it was just fine, then I try to boot to my TWRp but it seems I cant, then I install TWRP and it just works fine, then I want to flash new rom, then I qipe dalvik cache, cache, system, and data then it shows error "partitions blablabla" then I try to factory reset in TWRP, its done its job, then I try to flash the new rom but when I pick "sdcard" (internal storage) it was blank! then I check "sdcard1" (external memory) it was blank too! then I just reboot (it says no OS installed, I just swipe then it stuck on MI Logo).
3. I have tried some tricks to recover it but It cant! (I still didn't tries deep flash cable or either test point method because I don't know how to do that)
4. My devices Is Detected when I typed "fastboot devices" in cmd but not detected in MiFlash Tool.
Please how do I fix this problem?? please help me as soon as possible!!
Thanks.
Help me!
Please someone answers me! :crying:
Since your device is showing in fastboot, flash TWRP again from fastboot. Copy ROM and GApps to external SD card and boot into TWRP. Wipe dalvik, cache, data, system, and internal storage. Flash new ROM, GApps reboot.
If you get any errors while wiping partitions then format the partitions to f2fs or anything then again back to ext4.
Hope this helps!!!
Cheers ?
Chris828 said:
Hi,
My devices is stuck on Mi logo, it was not Bootloop, it cant reboot to EDL, sometimes my devices can go to Fasboot mode but sometimes cant, while in fastboot mode I check in the Device drivers section theres no Qualcomm blablabla but the only available is Android Bootloader Interface and when I try to flash my phone via Mi Flash Tool I cant because my devices is not detected, What should I do? :crying:
1. My device is already unlocked
2. Before this I was flashing RR, and it was just fine, then I try to boot to my TWRp but it seems I cant, then I install TWRP and it just works fine, then I want to flash new rom, then I qipe dalvik cache, cache, system, and data then it shows error "partitions blablabla" then I try to factory reset in TWRP, its done its job, then I try to flash the new rom but when I pick "sdcard" (internal storage) it was blank! then I check "sdcard1" (external memory) it was blank too! then I just reboot (it says no OS installed, I just swipe then it stuck on MI Logo).
3. I have tried some tricks to recover it but It cant! (I still didn't tries deep flash cable or either test point method because I don't know how to do that)
4. My devices Is Detected when I typed "fastboot devices" in cmd but not detected in MiFlash Tool.
Please how do I fix this problem?? please help me as soon as possible!!
Thanks.
Click to expand...
Click to collapse
Yeah. This is not a hard brick. You can also reflash miui from fastboot. Extract that tgz file of miui and click on one of the batch files.

[TUTORIAL] Install TWRP on Lenovo K8 Note (Oreo)

This procedure is intended for oreo users only !
WARNING : This is a Beta Build and is not completely stable. ANY data loss or bricked phones is not my or any of the Telegram members' responsibility. You and only YOU are responsible for the consequences.
The TWRP provided is a Beta Build by Telegram Group member Maanush. All credits go to him and the all other members of Telegram Group.
TWRP(Beta) : http://www.mediafire.com/file/7p7ida6ems0ta9l/TWRP_BETA_BUILD.img
Tutorial :
1. adb reboot bootloader
2. fastboot oem unlock
3. fastboot flash recovery twrp.img
4. fastboot oem reboot-recovery
After flashing TWRP:
1. Flash Force Encrypt Disabler.zip
2. Flash Magisk.zip
3. Wipe Dalvik/Cache
4. Format Data
6. Reboot
Not working
Sir, there is an error with magisk merge.img mount falied. Please help...
Akash.sep28 said:
Sir, there is an error with magisk merge.img mount falied. Please help...
Click to expand...
Click to collapse
If you're facing issues while flashing magisk modules then you might have done something wrong. Remember that you have to flash force encrypt disabler and format data after that
Sir
After flashing twrp my device restore stock recovery.
Sir I want only twrp recovery install on it.
So I can make backup
Help
CodeNameMadmax said:
Sir
After flashing twrp my device restore stock recovery.
Sir I want only twrp recovery install on it.
So I can make backup
Help
Click to expand...
Click to collapse
After successfully flashing image, write 'fastboot oem reboot-recovery'. Your device will boot into a black screen, now double press the power button, swipe to unlock. You will have to flash magisk zip(use adb sideload or flash from sd card) to prevent system from replacing TWRP.
Remember that you'll have to format your device once to be able to access internal storage so that you can restore backups
My phone not entering into the recovery mode
does the twrp3.1.1.0 work for 5 nov security update?
guys will the the old twrp3.1.1.0 for oreo works on latest 5 nov security patch
prashanth_a_r said:
guys will the the old twrp3.1.1.0 for oreo works on latest 5 nov security patch
Click to expand...
Click to collapse
Yes
sarathkrish02 said:
My phone not entering into the recovery mode
Click to expand...
Click to collapse
How are you trying to enter recovery mode?
Anas Rahman said:
How are you trying to enter recovery mode?
Click to expand...
Click to collapse
Now I can enter into twrp but tell me how to fix 0mb internal storage
sarathkrish02 said:
Now I can enter into twrp but tell me how to fix 0mb internal storage
Click to expand...
Click to collapse
Follow the steps that say "After flashing TWRP"
sarathkrish02 said:
Now I can enter into twrp but tell me how to fix 0mb internal storage
Click to expand...
Click to collapse
Or Google the same thing U will get the perfect answer even I had the same issue
About installation on twrp recovery
iam using lenovo k8 note. i have tried to install twrp recovery but i cant able to install it. i hve tried all the ways like using cmd all the cammands. after i complete flashing twrp and booting again it displays like "orange state " ,"device has been unlckd and cant b trusted" ,"your device will boot in 5 sec" after that my phone restarts and nothing happens . i have tried all possible ways . pls hlp me to install twrp .
salam... i m not entering into twrp recovery mode by this command "fastboot oem reboot-recovery" also tried to switch off cel phone with vol up+vol down+pwr btn and then vol+up and pwr btn but not entered... also tried with vol+down and pwr btn and select recovery mode but fail....
Finally i got my cell rooted successfully here is right twrp for lenovo k8 plus. All credit goes to @anasrehman @kqixs
https://androidfilehost.com/?fid=1322778262903998122
Hi, I have the same issue and I tried all the possible ways but nothing. Can anyone tell if got the same issue but got resolved
no usb debugging
currently my phone is switched off. I am able to go into normal recovery mode. I think the USB Debugging mode is off. How can i revive it again. I was thinking of applying from SD Card a custom ROM flashing. But how to unroot it first
Twrp Oreo Manning
I am just facing one major problem, every time I reboot my device It seems to be my recovery keeps installing again and again which means it's always so my internal storage - 0, after the formatting it reads it but after a new reboot, it doesn't.
Is this working now?

Categories

Resources