Related
Meizu comes with locked bootloader and it's vulnerability is not found for root.
So kingroot can also not root these devices
But with flyme(yun os) account you can get system privileges (root)
Another issue is for Some firmware there is no access to flyme account
"mzaccount" named app present in system apps which can be opened by nova activity like function of apps (use nova launcher, or lmt activity(lmt app then set activity mzaccont to open)
Then register your account Then go to option then tick the system privileges to get root
Just after selecting the system privileges device reboots do not afraid
After that you can give root permission to apps
Anyway second good news...
On meizu phones you can use xposed framework (apps )
You need an update.zip(firmware) in outermost part of your internal =sdcard/update.zip(better if you check it and install through recovery; first time)
Choose arm64 xposed framework for 64 bit phones like m2 note/mini
Then install your xposed framework (flash using flashfire apk by chainfire ; it may take upto 30 minute to complete in *black* screen don't afraid).
Before installation xposed you should wipe dalvik chache and chache.
When your device booted you may see app optimization starting again and again but don't worry it'll be completed.Complete installation and boot to system may take upto 1 hour so keep patience.
If you stuck in bootloop(just in case) then swich off for 15 seconds and reboot recovery and update through recovery.
I'm not responsible if any bad happens to you.
Don't delete update.zip(firmware). Put it as /sdcard/update.zip forever.(who knows when will you stuck in bootloop)
Don't flash rom with flashfire.
#####UNLOCK BOOTLOADER####
Remember by unlocking bootloader your all files(in internal) and data+ apps will be cleared
Things you'll need
1. Unlock script + recovery
(a) for meizu m2here
(b) for mx4
(C) for m1 note
2. Auto adb driver installer here
3. adb+key.exe here
4. Minimal adb and fastboot here
5. Apps- busybox free,terminal emulator ,super su
**Now see this video in YouTube**
THIS IS A PROBLEM WITH MEIZU USERS IF THEY SEEING A LONG BOOT TIME THEN HORRIFICALLY SOMETIMES THEY CAN NOT BOOT TO RECOVERY OR FASTBOOT BUT TRY WITH COOL MIND IT'LL BE DONE :laugh:
Don't afraid if you seeing bootloop let it complete
Time expected
1. for setting up driver and adb 10 minutes
2. for su binary update 5 minute
3. for install busybox 3 minutes
4. after unlocking bootloader may take time upto 2 hours in bootloop
5. in meizu boot animation takes upto 25 minutes
keep in mind
1. Try not to modify too deeply .
2. Tick usb debugging.
3. Try not to flash Rom or recovery on meizu devices without unlocking bootlaoder and deep knowledge.
4. Don't install xposed framework if you are not aware of risk .
5. Don't give file explorers root for always .
6. Don't try to delete system apps only freeze .
7. Flyme os/yun os is heavily modified Rom so don't need other theming or modification.
Sorry for my bad English
HIT THANX IF I HELPED
IF YOU HAVE ALREADY INSTALLED XPOSED IN YOUR MOBILE UNDER THE LIGHT OF THIS POST THEN PLEASE WRITE YOUR SUGGESTION/EXPERIENCE HERE SO THAT OTHER FOLLOWERS CAN BE GUIDED AND GAIN BELIEVE IN THIS METHOD
FRIENDS PLEASE REPORT WORKING AND NOT WORKING XPOSED MODULES HERE .
nasir.da.vinci said:
Meizu comes with locked bootloader and it's vulnerability is not found for root.
So kingroot can also not root these devices
But with flyme(yun os) account you can get system privileges (root)
Another issue is for Some firmware there is no access to flyme account
"mzaccount" named app present in system apps which can be opened by nova activity like function of apps (use nova launcher, or lmt activity(lmt app then set activity mzaccont to open)
Then register your account Then go to option then tick the system privileges to get root
Just after selecting the system privileges device reboots do not afraid
After that you can give root permission to apps
Anyway second good news...
On meizu phones you can use xposed framework (apps )
You need an update.zip(firmware) in outermost part of your internal =sdcard/update.zip
Then install your xposed framework (flash using flash Gordon=http://forum.xda-developers.com/attachment.php?attachmentid=2366442&d=1383402896)
If you stuck in bootloop then swich off for 15 seconds and reboot recovery and update through recovery
I'm not responsible if any bad happens to you
Don't flash rom with flash Gordon
keep in mind
1. Try not to modify too deeply .
2. Tick usb debugging.
3. Try not to flash Rom or recovery on meizu devices without deep knowledge.
4. Don't install xposed framework if you are not aware of risk .
5. Don't give file explorers root for always .
6. Don't try to delete system apps only freeze .
7. Flyme is/yun os is heavily modified Rom so don't need other theming or modification.
Sorry for my bad English
Click to expand...
Click to collapse
that is working for mx5?
thanks
eduardolobre said:
that is working for mx5?
thanks
Click to expand...
Click to collapse
Not tested but you can try ....
If flash Gordon not works then try flashfire"app.
Flash fire takes sometime 1 hour for flashing
Don't forget to put update.zip firmware in the root of sdcard
Hello,
Your tutorial about xposed also works on lollipop flyme 4.5.7 I ?
Thanks!
It will work on any meizu mobile ..no matters its locked or unlocked bootloader ...but dont try to use deep theming apps neither you'll face bootloop. If you face any type of bootloop (wait 30 minutes) then update the firmware through the native/stock flyme recovery
Here is the link to top themes https://doc-0c-2s-docs.googleuserco...384/*/0Bz7HPQ9NJ9NCWmJwSW9XRGpKODg?e=download
I have not tried this if it has paid themes then don't go ahead and install only free themes.Love and support meizu.
https://doc-0c-2s-docs.googleuserco...384/*/0Bz7HPQ9NJ9NCWmJwSW9XRGpKODg?e=download
Access deny
Sent from my MX5 using Tapatalk
http://forum.xda-developers.com/meizu-mx/help/meizu-mx5-flyme-5-xposed-how-t3290023
This one is on flyme os 5 and for me it seems easier, because the xposed is installed in about 30 sec.
kubas_inko_cz said:
http://forum.xda-developers.com/meizu-mx/help/meizu-mx5-flyme-5-xposed-how-t3290023
this one is on flyme os 5 and for me it seems easier, because the xposed is installed in about 30 sec.
Click to expand...
Click to collapse
that is great but it is not recomended for noob at least with locked bootloader devices
nasir.da.vinci said:
that is great but it is not recomended for noob at least with locked bootloader devices
Click to expand...
Click to collapse
Your right because it is nade JUST for MX5 and it have locked bootloader
Please where is the download link for xposed framework?
Sent from my Letv X500 using Tapatalk
Search exposed for lollipop in Google then go to xda and download sdk22arm64 for 64bit devices
Hello guys, please i need help on reviving my meizu m2 note. It is stuck in bootloop after trying to install Xposed Framework. The boot up is just stuck in the FLYME LOGO. The major problem now is that the phone fails to enter RECOVERY MODE else i would have wiped data/cache or even flash UPDATE.ZIP. The phone enters fastboot mode though but the bootloader is locked so, i cant flash anything via fastboot mode.
Please, help me out.
Misleading title. Clickbait
agssssss
Is there any method to unlock meizu mx4 pro ?
:highfive:HELLO GUYS
So Here u can Find How To Bypass Safetnet In Your Phone While Being Rooted.
As you all know safetynet is implemented by Google itself to check Security of your Device & also by Some games or apps Eg. Pokeman Go,Android pay,Snapchat etc. So If Your Phone Is Rooted SafetyNet Test Will Fail.
With failed Safetynet Test You Can't Run These Apps in Your Mobile.
Check your Safetynet Status By This App:- https://play.google.com/store/apps/details?id=com.scottyab.safetynet.sample
So If your Test Failed And you can't able to run Games or Some Apps Try This method
1. Fully Unroot Your Phone In SuperSu app Go to Settings tab on the top right corner, and then click Full Unroot. Confirm with 'Continue'. 3. Once this operation is done, which takes a few minutes, you can reboot your Android & Then Flash This Unroot Script In Custom Recovery
https://forum.xda-developers.com/attachment.php?attachmentid=3931994&d=1478779893
2. Download Magisk 12.0 http://tiny.cc/latestmagisk and Flash it in Custom Recovery & Reboot **Make sure in custom recovery if a Line Appears "Boot img already patched" That means You'r Not Fully Unrooted in this case you have to flash your Stock System.img or Stock rom**
3. Now Install Magisk Manager From Play Store https://play.google.com/store/apps/details?id=com.topjohnwu.magisk
4 In Magisk manager Go To Settings Click on Enable BusyBox & Magisk Hide
5. Thats it. Now Run Safetynet test in Magisk Manager It will pass.
6.Enjoy your Games or Apps
UPDATE :- With Android Security Patch 01/04/2016 On Marshmallow Flashed SuperSu 2.79 Flashed Suhide 0.55 Flashed Magisk 12.0 Flashed Xposed 87.0 Systemless PASSING SAFETY NET Without Disabling root
Credits :-
@topjohnwu For Magisk 12.0 & Magisk Manager App
@halifax For Unroot Su Script
Hey, I have a problem:
I used this script on my Galaxy Nexus but now I decided to use SuperSU again because Magsik didn't work for me. I have just one problem: After using this script I can't install SuperSU anymore. The installation works as usual without problems but if I open the SU app it sais I need a Su file flashed. Could you please help me to fix thid problem?
Thanks in advance,
greetings Nils
yo_honey said:
:highfive:HELLO GUYS
So Here u can Find How To Bypass Safetnet In Your Phone While Being Rooted.
.....
1. Fully Unroot Your Phone In SuperSu app Go to Settings tab on the top right corner, and then click Full Unroot. Confirm with 'Continue'. 3. Once this operation is done, which takes a few minutes, you can reboot your Android & Then Flash This Unroot Script In Custom Recovery
https://forum.xda-developers.com/attachment.php?attachmentid=3931994&d=1478779893
2. Download Magisk 12.0 http://tiny.cc/latestmagisk and Flash it in Custom Recovery & Reboot **Make sure in custom recovery if a Line Appears "Boot img already patched" That means You'r Not Fully Unrooted in this case you have to flash your Stock System.img or Stock rom**
3. Now Install Magisk Manager From Play Store https://play.google.com/store/apps/details?id=com.topjohnwu.magisk
4 In Magisk manager Go To Settings Click on Enable BusyBox & Magisk Hide
5. Thats it. Now Run Safetynet test in Magisk Manager It will pass.
6.Enjoy your Games or Apps
UPDATE :- With Android Security Patch 01/04/2016 On Marshmallow Flashed SuperSu 2.79 Flashed Suhide 0.55 Flashed Magisk 12.0 Flashed Xposed 87.0 Systemless PASSING SAFETY NET Without Disabling root
Credits :-
@topjohnwu For Magisk 12.0 & Magisk Manager App
@halifax For Unroot Su Script
Click to expand...
Click to collapse
Thanks my friend, u save my day, Samsung S6 Edge +.
Flash Latest SuperSu Zip in custom recovery
MrFlashGame said:
Hey, I have a problem:
I used this script on my Galaxy Nexus but now I decided to use SuperSU again because Magsik didn't work for me. I have just one problem: After using this script I can't install SuperSU anymore. The installation works as usual without problems but if I open the SU app it sais I need a Su file flashed. Could you please help me to fix thid problem?
Thanks in advance,
greetings Nils
Click to expand...
Click to collapse
Download Latest Stable version of SuperSu zip And Flash it Using Custom Recovery. This may solve your problem.
Hello, anyone have boot img for htc 820 dual sim?
Thank you
Hello everyone,
As you might have seen, Google Safetynet APIs have been updated. Since Official Magisk is using old API, when you try to pass Safetynet, it will automatically give you an error like " The response is invalid" or something like that.
So, in order to bypass this issue, I've been searching for a long time and I found a solution.
THIS WON'T WORK WITH XPOSED FRAMEWORK INSTALLED!!
1- Uninstall completely Magisk using official uninstaller.
2- Once the device rebooted, download and install latest unofficial Magisk Manager APK available on this page: https://github.com/ianmacd/MagiskBuilds?files=1
3- Open Magisk Manager and go to Magisk settings
4- Click on Update Channel and choose Custom
5- Insert this URL and click OK : https://raw.githubusercontent.com/ianmacd/MagiskBuilds/master/updates/ianmacd.json
6- Click on Clear Repo Cache
7- Return to Magisk Startpage and check for update
8- Install Unofficial Magisk 16.8
9- Once installation done, reboot your device
10- Go to Magisk Manager and check for Safetynet
If it passed, Congratulations, you're done.
If not, continue.
11- Download this Magisk Module : https://androidfilehost.com/?fid=5862345805528046758
12- Once downloaded, disconnect your phone from Internet (turn of the Wi-Fi, 4g, etc...). It's very important
13- Install the module using Magisk Manager and reboot
14- When reboot done, wait 5 minutes before turning on Internet connection
15- Go to Magisk Manager and check if Safetynet passed.
It should be working, it worked in my case.
Have tried on two devices:
- Leeco x626 with EUI ROM ( Cuoco) using the module
- Leeco x526 with MIUI 10 without the module
FOR EUI ROMs:
You could get an error saying you're using a modified software or something like this, after uninstalling old Magisk.
Do this :
- Download official Magisk uninstaller AND Unofficial Magisk 16.8 ZIP
- Reboot to TWRP Recovery
- Uninstall old Magisk using the uninstaller
DO NOT REBOOT
- Return to TWRP Home menu and install unofficial Magisk 16.8
- Reboot your device and it should be okay
Wow it worked. Thanks a lot bro.
xwml12 said:
Hello everyone,
As you might have seen, Google Safetynet APIs have been updated. Since Official Magisk is using old API, when you try to pass Safetynet, it will automatically give you an error like " The response is invalid" or something like that.
So, in order to bypass this issue, I've been searching for a long time and I found a solution.
1- Uninstall completely Magisk using official uninstaller.
2- Once the device rebooted, download and install latest unofficial Magisk Manager APK available on this page: https://github.com/ianmacd/MagiskBuilds?files=1
3- Open Magisk Manager and go to Magisk settings
4- Click on Update Channel and choose Custom
5- Insert this URL and click OK : https://raw.githubusercontent.com/ianmacd/MagiskBuilds/master/updates/ianmacd.json
6- Click on Clear Repo Cache
7- Return to Magisk Startpage and check for update
8- Install Unofficial Magisk 16.8
9- Once installation done, reboot your device
10- Go to Magisk Manager and check for Safetynet
If it passed, Congratulations, you're done.
If not, continue.
11- Download this Magisk Module : https://androidfilehost.com/?fid=5862345805528046758
12- Once downloaded, disconnect your phone from Internet (turn of the Wi-Fi, 4g, etc...). It's very important
13- Install the module using Magisk Manager and reboot
14- When reboot done, wait 5 minutes before turning on Internet connection
15- Go to Magisk Manager and check if Safetynet passed.
It should be working, it worked in my case.
Have tried on two devices:
- Leeco x626 with EUI ROM ( Cuoco) using the module
- Leeco x526 with MIUI 10 without the module
FOR EUI ROMs:
You could get an error saying you're using a modified software or something like this, after uninstalling old Magisk.
Do this :
- Download official Magisk uninstaller AND Unofficial Magisk 16.8 ZIP
- Reboot to TWRP Recovery
- Uninstall old Magisk using the uninstaller
DO NOT REBOOT
- Return to TWRP Home menu and install unofficial Magisk 16.8
- Reboot your device and it should be okay
Click to expand...
Click to collapse
Didn't work for me. I've tried everything as stated in the instructions. I'm using an x626 and running on EUI 30s room. See what it shows from d pics below
rexmako said:
Didn't work for me. I've tried everything as stated in the instructions. I'm using an x626 and running on EUI 30s room. See what it shows from d pics below
Click to expand...
Click to collapse
Check if you don't have Xposed Framework installed, if yes uninstall it as it won't let the phone pass Safetynet check.
xwml12 said:
Check if you don't have Xposed Framework installed, if yes uninstall it as it won't let the phone pass Safetynet check.
Click to expand...
Click to collapse
I don't think I have Xposed framework, unless it's hidden somewhere in my phone. How do I check for it? I know I have some root apps installed. Apps like es explorer, root explorer and browser, BusyBox, etal
rexmako said:
I don't think I have Xposed framework, unless it's hidden somewhere in my phone. How do I check for it? I know I have some root apps installed. Apps like es explorer, root explorer and browser, BusyBox, etal
Click to expand...
Click to collapse
BusyBox... That's the problem, try without it Installed
xwml12 said:
BusyBox... That's the problem, try without it Installed
Click to expand...
Click to collapse
I just did. I've uninstalled BusyBox and still the same thing. Problem still persist. Or should I just uninstall all my root apps, including root explorer, battery fix and the rest?
After updating magisk I managed to passed safetynet check, but it still wont allow me to launch Fate/Grand Order
Dragladiator said:
After updating magisk I managed to passed safetynet check, but it still wont allow me to launch Fate/Grand Order
Click to expand...
Click to collapse
Use Magisk Hide and click on your desired apps to hide them root access.
xwml12 said:
Use Magisk Hide and click on your desired apps to hide them root access.
Click to expand...
Click to collapse
The Game is still detected Magisk even with after repacking magisk and acitve magisk hide
Dragladiator said:
The Game is still detected Magisk even with after repacking magisk and acitve magisk hide
Click to expand...
Click to collapse
In Magisk options , disable systemless hosts option and reboot .
xwml12 said:
Hello everyone,
As you might have seen, Google Safetynet APIs have been updated. Since Official Magisk is using old API, when you try to pass Safetynet, it will automatically give you an error like " The response is invalid" or something like that.
So, in order to bypass this issue, I've been searching for a long time and I found a solution.
THIS WON'T WORK WITH XPOSED FRAMEWORK INSTALLED!!
1- Uninstall completely Magisk using official uninstaller.
2- Once the device rebooted, download and install latest unofficial Magisk Manager APK available on this page: https://github.com/ianmacd/MagiskBuilds?files=1
3- Open Magisk Manager and go to Magisk settings
4- Click on Update Channel and choose Custom
5- Insert this URL and click OK : https://raw.githubusercontent.com/ianmacd/MagiskBuilds/master/updates/ianmacd.json
6- Click on Clear Repo Cache
7- Return to Magisk Startpage and check for update
8- Install Unofficial Magisk 16.8
9- Once installation done, reboot your device
10- Go to Magisk Manager and check for Safetynet
If it passed, Congratulations, you're done.
If not, continue.
11- Download this Magisk Module : https://androidfilehost.com/?fid=5862345805528046758
12- Once downloaded, disconnect your phone from Internet (turn of the Wi-Fi, 4g, etc...). It's very important
13- Install the module using Magisk Manager and reboot
14- When reboot done, wait 5 minutes before turning on Internet connection
15- Go to Magisk Manager and check if Safetynet passed.
It should be working, it worked in my case.
Have tried on two devices:
- Leeco x626 with EUI ROM ( Cuoco) using the module
- Leeco x526 with MIUI 10 without the module
FOR EUI ROMs:
You could get an error saying you're using a modified software or something like this, after uninstalling old Magisk.
Do this :
- Download official Magisk uninstaller AND Unofficial Magisk 16.8 ZIP
- Reboot to TWRP Recovery
- Uninstall old Magisk using the uninstaller
DO NOT REBOOT
- Return to TWRP Home menu and install unofficial Magisk 16.8
- Reboot your device and it should be okay
Click to expand...
Click to collapse
What if custom ROMs? How do we make them pass the check using any of the above methods?
rexmako said:
What if custom ROMs? How do we make them pass the check using any of the above methods?
Click to expand...
Click to collapse
Working on all ROMS, Custom or Stock. Just follow the guide
error installing new APK:
App not installed. The package conflcts with an existing package by the same name.
x522 Le 2, LineageOS 14.1 official nightly.
help?
EDIT: Nevermind, uninstalled with TWRP and uninstall zip, noy uninstall button in manager. oops!
EDIT2: still fails cts on unofficial 17.2 with unofficial manager 09-20. on leeco x522. help?
hi ppl
it was rooted before. used twrp and some custom roms. but later it unrooted somehow.
I tried flashing super su, magisk and ioroot. supersu and magisk turn with an error msg
io root made it stuck on bootloader animation so I flashed a backup.
how to root it?
thx in advance
1) flash latest twrp http://www.gregtwallace.com/lgg2-projects/twrp/ - then reboot into twrp
2) made absolutely all wipes incl internal and data (delete all stuff) - then reboot into twrp
3) connect to usb - and simply copy rom, gapps, and root solution what you want to flash
latest stable magisk for twrp - https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
latest supersu for twrp - Recovery Flashable.zip http://www.supersu.com/download
3) flash the rom what you wanted and flash gapps
3) flash magisk or supersu
(if android 7.1.2 or higher of course - I recommend magisk, because of working nfc pay features, a lot of great systemless addons etc...)
if you prefer old lollipop rom (for example CloudyG2_3.3 ) - it supersu only.
This is the correct sequence - which will eliminate problems with the firmware. If you deleted and installed the root earlier (as you say)
I tried flashing super su, magisk and ioroot. supersu and magisk turn with an error msg
Click to expand...
Click to collapse
jeezes)) you already killed the rom.... and then restore the all this restores backup, this is a "dirty flash" with a bunch of "remnants". I recommend to do clean flash it in the specified sequence and everything will be ok.
You will spend a couple of 1-2 hours only on installing (and setting) completely all applications. It is not so difficult. But it will save you from a bunch of nonsense questions...
If you actually don't have TWRP recovery installed or old Kit kat Rom - this is absolutely another question and the instructions will not work for you. Also, Kit Kat and Lollipop based ROMs does not support Magisk - because of this error.
zemix said:
1) flash latest twrp http://www.gregtwallace.com/lgg2-projects/twrp/ - then reboot into twrp
2) made absolutely all wipes incl internal and data (delete all stuff) - then reboot into twrp
3) connect to usb - and simply copy rom, gapps, and root solution what you want to flash
latest stable magisk for twrp - https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
latest supersu for twrp - Recovery Flashable.zip http://www.supersu.com/download
3) flash the rom what you wanted and flash gapps
3) flash magisk or supersu
(if android 7.1.2 or higher of course - I recommend magisk, because of working nfc pay features, a lot of great systemless addons etc...)
if you prefer old lollipop rom (for example CloudyG2_3.3 ) - it supersu only.
This is the correct sequence - which will eliminate problems with the firmware. If you deleted and installed the root earlier (as you say)
jeezes)) you already killed the rom.... and then restore the all this restores backup, this is a "dirty flash" with a bunch of "remnants". I recommend to do clean flash it in the specified sequence and everything will be ok.
You will spend a couple of 1-2 hours only on installing (and setting) completely all applications. It is not so difficult. But it will save you from a bunch of nonsense questions...
If you actually don't have TWRP recovery installed or old Kit kat Rom - this is absolutely another question and the instructions will not work for you. Also, Kit Kat and Lollipop based ROMs does not support Magisk - because of this error.
Click to expand...
Click to collapse
thx bro. I did all the steps but it seems same problem going on. sure I want the latest of everything. better updated all. so, using the latest twrp, I wipe all data then format all data then again wipe everything
this aosp rom and gapps worked perfectly. then flashed teh magisk but again its unrooted.
it installs magisk perfectly but root checker says its not rooted. anyway thx for help
btw, aosp rom android 9 has a bluetooth bug. giving a bluetooth stopped message every 10 seconds.
so any advice anout that problem?
you must grant root permission when popup (magisk) appears.
its not automatically
popup similar as in supersu
root works excellent on d802 with Magisk
for example Es File Explorer or any Root Checker
---------- Post added at 17:12 ---------- Previous post was at 17:10 ----------
I use 7.1.2 android based AospExtended v 4.6
because latest pie rom has bugs and not stable
Screenshot https://i.imgur.com/6IcIvJx.jpg
slabongrade said:
thx bro. I did all the steps but it seems same problem going on. sure I want the latest of everything. better updated all. so, using the latest twrp, I wipe all data then format all data then again wipe everything
this aosp rom and gapps worked perfectly. then flashed teh magisk but again its unrooted.
it installs magisk perfectly but root checker says its not rooted. anyway thx for help
btw, aosp rom android 9 has a bluetooth bug. giving a bluetooth stopped message every 10 seconds.
Click to expand...
Click to collapse
flash magisk.zip and install magisk.apk to root android 9
zemix said:
you must grant root permission when popup (magisk) appears.
its not automatically
popup similar as in supersu
root works excellent on d802 with Magisk
for example Es File Explorer or any Root Checker
---------- Post added at 17:12 ---------- Previous post was at 17:10 ----------
I use 7.1.2 android based AospExtended v 4.6
because latest pie rom has bugs and not stable
Click to expand...
Click to collapse
zemix said:
Screenshot https://i.imgur.com/6IcIvJx.jpg
Click to expand...
Click to collapse
elffoh said:
flash magisk.zip and install magisk.apk to root android 9
Click to expand...
Click to collapse
zemix said:
you must grant root permission when popup (magisk) appears.
its not automatically
popup similar as in supersu
root works excellent on d802 with Magisk
for example Es File Explorer or any Root Checker
---------- Post added at 17:12 ---------- Previous post was at 17:10 ----------
I use 7.1.2 android based AospExtended v 4.6
because latest pie rom has bugs and not stable
Click to expand...
Click to collapse
zemix said:
Screenshot https://i.imgur.com/6IcIvJx.jpg
Click to expand...
Click to collapse
elffoh said:
flash magisk.zip and install magisk.apk to root android 9
Click to expand...
Click to collapse
I used supersu and it turned out to be "certification verify" problem. OS not running because of this problem but says rooted. so I can still reach twrp but it really become annoying. this is my old phone and will use as 2nd in my Thailand trip soon.
what to do now? can I use unrooted with a sim card? with no problem?
Please, don't use this nonsense "overquoting" when you answer to someone. Have some respect to the forum rules, and users.
if you want stable rom for LGG2-D802 flash
1) aosp extended based on 7.1.2 or 8.1 versions of Android.
2) flash gapps nano
3) flash magisk zip
4) after rom starts - do the first quick settings - then open Magisk (and if needed update the Magisk manager)
Do not flash both (supersu and magisk) risk to brick the phone.
"device not certified" messege will be always if you use Supersu. It's obviously. Using supersu you unable to use apps like Google pay or any banking apps, because of system root.
Magisk is systemless solution, that's why Google do not recognize Magisk's root. And Play Store on about screen always show "Your device is certified". Also you can Hide root from some apps using Hide option in Magisk manager (it's very useful for local banking apps).
I have a suspicion that you used an older version of Android KitKat (official). And now you try to flash a new Rom (above the Android 7.1.2+). You can't do this. Because you must have Lollipop bootloader. You must be an Android Lillipop first. And then (get Root, then TWRP). And after all that - you will be able to flash some of Rom we are talking about.
zemix said:
Please, don't use this nonsense "overquoting" when you answer to someone. Have some respect to the forum rules, and users.
if you want stable rom for LGG2-D802 flash
1) aosp extended based on 7.1.2 or 8.1 versions of Android.
2) flash gapps nano
3) flash magisk zip
4) after rom starts - do the first quick settings - then open Magisk (and if needed update the Magisk manager)
Do not flash both (supersu and magisk) risk to brick the phone.
"device not certified" messege will be always if you use Supersu. It's obviously. Using supersu you unable to use apps like Google pay or any banking apps, because of system root.
Magisk is systemless solution, that's why Google do not recognize Magisk's root. And Play Store on about screen always show "Your device is certified". Also you can Hide root from some apps using Hide option in Magisk manager (it's very useful for local banking apps).
I have a suspicion that you used an older version of Android KitKat (official). And now you try to flash a new Rom (above the Android 7.1.2+). You can't do this. Because you must have Lollipop bootloader. You must be an Android Lillipop first. And then (get Root, then TWRP). And after all that - you will be able to flash some of Rom we are talking about.
Click to expand...
Click to collapse
Oh Finally!
dowloaded aosp 8.1 and all done. I was trying to use android 9 to be updated. But, pie becoming to be a "creampie" to me so I listened your word. and did it
just opened recovery mode and deleted all the zips. and copied new ones and flashed in order
1) aosp extended 8.1
2) open gapps nano for 8
3) magisk beta (yes this time I tried beta ver and it worked!)
after settings etc. checked with root checker and it was ok. so magisk.apk is not necessary now
thx again bro
Hello! Has anyone installed official Nethunter 2020-pre3 on this device? If so, could you please describe step-by-step how you managed to do that, what MIUI (or maybe custom ROM) you have, and how it works?
you can install, but you need kernel to get wifi to work. if someone implement nethunter wlan mon to kernel, then you could test vulnerabilities
there is also Andrax, but also requires kernel for monitoring
fotom-dotcom said:
Hello! Has anyone installed official Nethunter 2020-pre3 on this device? If so, could you please describe step-by-step how you managed to do that, what MIUI (or maybe custom ROM) you have, and how it works?
Click to expand...
Click to collapse
my phone is currently running the latest version of miui 11 and when I flash the kali nethunter kernel to my mi 9t, it gets stuck on boot, any solutions or step by step guide on how I can successfully install it?
Flash MIUI fastboot Rom (11.0.5) and boot to the system
Remove your Google and Mi account if you have one
Then install TWRP
Install Disable_DM-Veriety_Forcencrypt(find it on xda)
Reboot recovery
Install magisk and perform format data
Boot to the system and set up the phone
Then install magisk again
Install busybox app from playstore and install busybox itself to /system/xbin
Go to TWRP
Install latest NH image
Go to Mount and untick /System
Install Magisk (for the last time)
Wipe cache and dalvik, then reboot. You should see NH boot animation.
Go to NH app, grant all permissions and start chroot
Go to NH Store, in settings tap on expert mode and untick PrivilegeExtention
Update NH app to the latest version
And you're done! This step-by-step guide should help to install NH and make it work properly. Then just type "apt update && apt -y full-upgrade" in NH terminal and you're good to go
fotom-dotcom said:
Flash MIUI fastboot Rom (11.0.5) and boot to the system
Remove your Google and Mi account if you have one
Then install TWRP
Install Disable_DM-Veriety_Forcencrypt(find it on xda)
Reboot recovery
Install magisk and perform format data
Boot to the system and set up the phone
Then install magisk again
Install busybox app from playstore and install busybox itself to /system/xbin
Go to TWRP
Install latest NH image
Go to Mount and untick /System
Install Magisk (for the last time)
Wipe cache and dalvik, then reboot. You should see NH boot animation.
Go to NH app, grant all permissions and start chroot
Go to NH Store, in settings tap on expert mode and untick PrivilegeExtention
Update NH app to the latest version
And you're done! This step-by-step guide should help to install NH and make it work properly. Then just type "apt update && apt -y full-upgrade" in NH terminal and you're good to go
Click to expand...
Click to collapse
-I just installed Kali NetHunter last week to QFJEUXM v11.0.6 and Disable_DM-Veriety_Forcencrypt is NOT NEEDED (it is only needed for custom ROMs, no need for TWRP, Magisk or NetHunter overlay).
Ofc, every type when bootibg to TWRP (use official 3.4.0), type in your Android screen unlock pin to let TWRP on-the-fly decrypt Data (just like when booting to Android), but keeping your file system encrypted
With DFE you force complete decrypion of your Data - anybody who would boot into TWRP would be able to read/write to your Data without need to know your Androud screen unlock pin
(I don't know why people copy/paste this DFE into every guide: for TWRP, for rooting, etc - it is only needed for installation of custom ROMs because they are usually not properly ported to the device and they don't support stock file encryption, hence encryption must be removed by DFE for custom ROMs to be able to access Data)
- Also, I didn't remove my Google and Mi account, and I didn't format Data - no need for TWRP, not for Magisk, neither for NH.
Upon installing NH, I had all my apps, data, settings as before
- Btw, "apt update && apt -y full-upgrade" is covered by NetHunter app (comed with the installation) go to Custum commands tab, first option there
PS: Custom kernel is included to the pre-built NH image, as well as stock GApps
zgfg said:
-I just installed Kali NetHunter last week to QFJEUXM v11.0.6 and Disable_DM-Veriety_Forcencrypt is NOT NEEDED (it is only needed for custom ROMs, no need for TWRP, Magisk or NetHunter overlay).
Ofc, every type when bootibg to TWRP (use official 3.4.0), type in your Android screen unlock pin to let TWRP on-the-fly decrypt Data (just like when booting to Android), but keeping your file system encrypted
With DFE you force complete decrypion of your Data - anybody who would boot into TWRP would be able to read/write to your Data without need to know your Androud screen unlock pin
(I don't know why people copy/paste this DFE into every guide: for TWRP, for rooting, etc - it is only needed for installation of custom ROMs because they are usually not properly ported to the device and they don't support stock file encryption, hence encryption must be removed by DFE for custom ROMs to be able to access Data)
- Also, I didn't remove my Google and Mi account, and I didn't format Data - no need for TWRP, not for Magisk, neither for NH.
Upon installing NH, I had all my apps, data, settings as before
- Btw, "apt update && apt -y full-upgrade" is covered by NetHunter app (comed with the installation) go to Custum commands tab, first option there
PS: Custom kernel is included to the pre-built NH image, as well as stock GApps
Click to expand...
Click to collapse
Can u help me? https://drive.google.com/file/d/10KY4uZoZknjvQr8qDP7UHLDPInjIQVYg/view?usp=drivesdk
Can you help us with your step by step ? Thank you !
Can you help us with your steps ?
zgfg said:
-I just installed Kali NetHunter last week to QFJEUXM v11.0.6 and Disable_DM-Veriety_Forcencrypt is NOT NEEDED (it is only needed for custom ROMs, no need for TWRP, Magisk or NetHunter overlay).
Ofc, every type when bootibg to TWRP (use official 3.4.0), type in your Android screen unlock pin to let TWRP on-the-fly decrypt Data (just like when booting to Android), but keeping your file system encrypted
With DFE you force complete decrypion of your Data - anybody who would boot into TWRP would be able to read/write to your Data without need to know your Androud screen unlock pin
(I don't know why people copy/paste this DFE into every guide: for TWRP, for rooting, etc - it is only needed for installation of custom ROMs because they are usually not properly ported to the device and they don't support stock file encryption, hence encryption must be removed by DFE for custom ROMs to be able to access Data)
- Also, I didn't remove my Google and Mi account, and I didn't format Data - no need for TWRP, not for Magisk, neither for NH.
Upon installing NH, I had all my apps, data, settings as before
- Btw, "apt update && apt -y full-upgrade" is covered by NetHunter app (comed with the installation) go to Custum commands tab, first option there
PS: Custom kernel is included to the pre-built NH image, as well as stock GApps
Click to expand...
Click to collapse
mapachesan said:
Can you help us with your steps ?
Click to expand...
Click to collapse
Let me try to recall. Maybe I did some unnecessary steps and if I will go again I would try to do it in a more elegant way:
I had
- QFJEUXM v11.0.6
- Hasty kernel
- Magisk Canary, BusyBox for Android NDK (Systemless module, not app from Playstore) and several other Magisk modules
- TWRP 3.4.0
I never used any custom ROM, I never messed up with Persist, formatting Data, FDE and so - and it was not needed here either!!!
I did some backups but TG didn't need to use them, everything was preserved.
So I didn't remove Google or Mi account, didn't even remove lock-screen Pin (probably would be safer, just in case)
Maybe it was not needed but I flashed stock boot.img (to get rid of changes done by Hasty and Magisk).
I rebooted to Android and ofc lost TWRP - I had to flash it from fastboot again.
So I should have rebooted first to TWRP and only then to Android - that way TWRP would be preserved
Then I rebooted to TWRP and flashed nethunter-2020.2-davinci-miui-ten-kalifs-full.zip
Again I did a mistake (I was discussing something with my wife?) that I rebooted to Android and lost TWRP - I should have rebooted first to TWRP to preserve it
So I flashed TWRP again, booted to TWRP, made a backup of Boot image.
Booted to Android, opened Magisk Manager, patched the backed-up boot.emmc.win (Preserve DM and Preserve Encryption both On, Recovery mode Off).
Rebooted to TWRP, wiped Dalwik and Cache, and flashed the patched Boot img.
Rebooted to Android and I had Magisk with all my previous modules (incl. e.g. Viper4Android, BusyBox, etc).
Probably just flashing Magisk zip through TWRP would also work (but I usually prefer patching method)
Everything (apps, data, settings incl. unlock PIN, etc) was preserved.
It means also stock GApps, my Google account, Google apps (you name it) - all continued to work as in the stock firmware
Opened NetHunter app and Kali Chroot manager - granted root and other permissions.
Also, open Custom commands and Update Kali Metapackages (do it every few days to stay up-to-date)
Open also (I forgot, did it few days later), NetHunter Store, Settings, Expert mode and untick Privilege Extention.
Let it update NetHunter app
That's it, to my best memory
Edit:
One more tip, not related to NH but generally to SafetyNet and unlocked Bootloader
Install Magisk Hide Props Config (Magisk module) and reboot.
Run props from Terminal, choose Edit custom props (not Fingerprint option) redefine ro.product.model to e.g. Unknown and reboot - now, SafetyNet will pass!
Ofc, you should have Magisk Hide option in Magisk Manager ticked on (must be rebooted upon)
If Playstore shows Device is not certified, it can be easily fixed:
- AirPlane mode on
- Settings, Apps, Show System apps
- Search for Google and for Playstore app, Services and Framework do Delete Cache and Data
Reboot, AirPlane off, give a time for Playstore to sync and it will show Device is certified
PS:
For Ctrl c command (you will need e.g. for Wifite nethunting), install Hacker's Keyboard from Playstore
Whenever you need terminal, you can use NetHunter terminal (Android option) - it's better than Terminal app from Playstore.
How hunting can look like:
https://mega.nz/file/p5VlRA6b#btALUgFkxxJn0aZQdHs-oLVwTdeCKLSFsTfJrO4dbGc
zgfg said:
Let me try to recall. Maybe I did some unnecessary steps and if I will go again I would try to do it in a more elegant way:
I had
- QFJEUXM v11.0.6
- Hasty kernel
- Magisk Canary, BusyBox for Android NDK (Systemless module, not app from Playstore) and several other Magisk modules
- TWRP 3.4.0
I never used any custom ROM, I never messed up with Persist, formatting Data, FDE and so - and it was not needed here either!!!
I did some backups but TG didn't need to use them, everything was preserved.
So I didn't remove Google or Mi account, didn't even remove lock-screen Pin (probably would be safer, just in case)
I did it, but the NH app doesn't work (version 2020.02) you saw the video uploaded on google drive
Maybe it was not needed but I flashed stock boot.img (to get rid of changes done by Hasty and Magisk).
I rebooted to Android and ofc lost TWRP - I had to flash it from fastboot again.
So I should have rebooted first to TWRP and only then to Android - that way TWRP would be preserved
Then I rebooted to TWRP and flashed nethunter-2020.2-davinci-miui-ten-kalifs-full.zip
Again I did a mistake (I was discussing something with my wife) that I rebooted to Android and lost TWRP - I should have rebooted first to TWRP to preserve it
So I flashed TWRP again, booted to TWRP, made a backup of Boot image.
Booted to Android, opened Magisk Manager, patched the backed-up boot.emmc.win (Preserve DM and Preserve Encryption both On, Recovery mode Off).
Rebooted to TWRP, wiped Dalwik and Cache, and flashed the patched Boot img.
Rebooted to Android and I had Magisk with all my previous modules (incl. e.g. Viper4Android, BusyBox, etc).
Probably just flashing Magisk zip through TWRP would also work (but I usually prefer patching method)
Everything (apps, data, settings incl. unlock PIN, etc) was preserved.
It means also stock GApps, my Google account, Google apps (you name it) - all continued to work as in the stock firmware
Opened NetHunter app and Kali Chroot manager - granted root and other permissions.
Also, open Custom commands and Update Kali Metapackages (do it every few days to stay up-to-date)
Open also (I forgot, did it few days later), NetHunter Store, Settings, Expert mode and untick Privilege Extention.
Let it update NetHunter app
That's it, to my best memory
Edit:
One more tip, not related to NH but generally to SafetyNet and unlocked Bootloader
Install Magisk Hide Props Config (Magisk module) and reboot.
Run props from Terminal, choose Edit custom props (not Fingerprint option) redefine ro.product.model to e.g. Unknown and reboot - now, SafetyNet will pass!
Ofc, you should have Magisk Hide option in Magisk Manager ticked on (must be rebooted upon)
If Playstore shows Device is not certified, it can be easily fixed:
- AirPlane mode on
- Settings, Apps, Show System apps
- Search for Google and for Playstore app, Services and Framework do Delete Cache and Data
Reboot, AirPlane off, give a time for Playstore to sync and it will show Device is certified
PS:
For Ctrl c command (you will need e.g. for Wifite nethunting), install Hacker's Keyboard from Playstore
Whenever you need terminal, you can use NetHunter terminal (Android option) - it's better than Terminal app from Playstore.
How hunting can look like:
https://mega.nz/file/p5VlRA6b#btALUgFkxxJn0aZQdHs-oLVwTdeCKLSFsTfJrO4dbGc
Click to expand...
Click to collapse
>Miui beta chinese 20.7.16
I did it, but the NH app doesn't work (version 2020.02) you saw the video uploaded on google drive
https://drive.google.com/file/d/10KY4uZoZknjvQr8qDP7UHLDPInjIQVYg/view?usp=drivesdk
View attachment 5063369
Irineu F said:
>Miui beta chinese 20.7.16
I did it, but the NH app doesn't work (version 2020.02) you saw the video uploaded on google drive
https://drive.google.com/file/d/10KY4uZoZknjvQr8qDP7UHLDPInjIQVYg/view?usp=drivesdk
Click to expand...
Click to collapse
Sorry but recording by camera or what was very bad, cannot read anything.
Please use stock Screen recorder - see a screenshot.
Also, you can take screenscots by sliding three fingers, this is useful for capturing short lasting notifications and so - second screenshot
Isn't your notification saying something about Chroot (cannot read from your movie) - it should look like on my screenshots
Check slso if root is granted and all permissions given - further screenshots
Edit:
Make sure you also have Busybox for Android NDK (Magisk module) installed
Irineu F said:
>Miui beta chinese 20.7.16
I did it, but the NH app doesn't work (version 2020.02) you saw the video uploaded on google drive
https://drive.google.com/file/d/10KY4uZoZknjvQr8qDP7UHLDPInjIQVYg/view?usp=drivesdk
Click to expand...
Click to collapse
Manually grant all the permissions to the NH app and it should work.
zgfg said:
View attachment 5063369
Sorry but recording by camera or what was very bad, cannot read anything.
Please use stock Screen recorder - see a screenshot.
Also, you can take screenscots by sliding three fingers, this is useful for capturing short lasting notifications and so - second screenshot
Isn't your notification saying something about Chroot (cannot read from your movie) - it should look like on my screenshots
Check slso if root is granted and all permissions given - further screenshots
Edit:
Make sure you also have Busybox for Android NDK (Magisk module) installed
Click to expand...
Click to collapse
on the notification screen, NH says Chroot is not installed, I don't know how to give manual permission, because NH is installed as a System App, so it should have all permissions
Adoantony said:
on the notification screen, NH says Chroot is not installed, I don't know how to give manual permission, because NH is installed as a System App, so it should have all permissions
Click to expand...
Click to collapse
Have you tried?
See my screenstots from previous post.
Settings, Apps, Manage apps, Show system apps, open e.g. NetHunter app, App Permissions...
zgfg said:
Have you tried?
See my screenstots from previous post.
Settings, Apps, Manage apps, Show system apps, open e.g. NetHunter app, App Permissions...
Click to expand...
Click to collapse
https://mega.nz/file/zpYRmYaA#Kav_NBBRi6esWuQ4u0Z9EQDPfLfke2CSwUbZ_hM605o
Adoantony said:
https://mega.nz/file/zpYRmYaA#Kav_NBBRi6esWuQ4u0Z9EQDPfLfke2CSwUbZ_hM605o
Click to expand...
Click to collapse
Your app settings look different, what is exactly your model and firmware (ROM)
https://mega.nz/file/JhE2BKxL#VRl4ph_dQ41b2zdREtRwrgK9hSheWPkMz8ZXp2vNeDo
zgfg said:
Your app settings look different, what is exactly your model and firmware (ROM)
https://mega.nz/file/JhE2BKxL#VRl4ph_dQ41b2zdREtRwrgK9hSheWPkMz8ZXp2vNeDo
Click to expand...
Click to collapse
https://drive.google.com/file/d/10Y1PFZ3BJsVfYK0lj2XIC6OzEOCXr6nJ/view?usp=drivesdk
Rom beta chinese
do you think i should try to use at Rom Global?
Adoantony said:
https://drive.google.com/file/d/10Y1PFZ3BJsVfYK0lj2XIC6OzEOCXr6nJ/view?usp=drivesdk
Rom beta chinese
do you think i should try to use at Rom Global?
Click to expand...
Click to collapse
On their page they it's not specified which stock firmware for Mi 9T the pre-built image is for:
https://www.offensive-security.com/kali-linux-nethunter-download/
I'm using with QFJEUXM 11.0.6 - global eu, MiUI 11, don't know for other firmwares like Chinese, MIUI 12
zgfg said:
On their page they it's not specified which stock firmware for Mi 9T the pre-built image is for:
https://www.offensive-security.com/kali-linux-nethunter-download/
I'm using with QFJEUXM 11.0.6 - global eu, MiUI 11, don't know for other firmwares like Chinese, MIUI 12
Click to expand...
Click to collapse
fingerprint doesn't work does it?
Adoantony said:
fingerprint doesn't work does it?
Click to expand...
Click to collapse
Just tested five times, it worked (now) for me (frankly, better than expected)
Generally, I'm disappointed with this FOD, I've tried all tricks suggested on forums but never made it working satisfactory, with no stock firmware (one day almost reliable, next day completely useless) hence I better stopped using it months ago (before installing NH)
zgfg said:
Just tested five times, it worked (now) for me (frankly, better than expected)
Generally, I'm disappointed with this FOD, I've tried all tricks suggested on forums but never made it working satisfactory, with no stock firmware (one day almost reliable, next day completely useless) hence I better stopped using it months ago (before installing NH)
Click to expand...
Click to collapse
thanks for answering me <3
do you have a telegram?