Related
So a while back I rooted my Huawei P8Lite ALE-UL00 (China) and it took a while but it worked out great. Then a few weeks ago I was sick and browsing on my phone when I got a notification from EMUI telling me to update. Being the stupid kid I am I did it. And then it would show the Huawei logo on and on and on. Destined to fix it went to the forums to fix it. did ADB and Fastboot, nothing. Except more problems. Now when I turn it on it directly says this:
RESCUE MODE
Attention!
Please update systems again
Update Use Guide:
--- Android Logo ---
Error!
Func NO : 10 (boot image!)
Func NO: 2 (load failed!)
you can simply flash it by fast boot mod, flash the rom version UL-00-C00-B220
which update version did you got ??
Yes , you need fastboot b220 . Later OTA b230
You could try to only flash the boot.img via adb.
One Problem
I cannot fastboot it, it doesnt take me out of that screen, on my computer it says waiting for device, if i type fastboot devices it doesnt show up. Any other ideas?
Pricklybob said:
I cannot fastboot it, it doesnt take me out of that screen, on my computer it says waiting for device, if i type fastboot devices it doesnt show up. Any other ideas?
Click to expand...
Click to collapse
Well, first try again and dont forget to close hisuite it does that problem.
If it didint work, turn your device off then hold down volume down button and after 3-4 seconds connect your device to computer via a USB cable it should access you to the bootloader then flash the firmware manually.
important
how are you guys
my device huawei p8 lite ALE-L21
I updated my phone to Android Marshmallow and I did not like it
The model number by details is >> ALE-L21C432B550
I WANT to comeback to android lollipop how can i do that
please help me my friends
Problem
ya.husein said:
Well, first try again and dont forget to close hisuite it does that problem.
If it didint work, turn your device off then hold down volume down button and after 3-4 seconds connect your device to computer via a USB cable it should access you to the bootloader then flash the firmware manually.
Click to expand...
Click to collapse
Tried that, didnt let me work...
Hello everyone! I have read almost a hundred threads and discussions about unbricking P9 Lite and none of them was my case. I have unlocked my bootloader and i can tell that by seeing the warning from huawei which says my device is not safe.
Okay, but the case is phone is stucked at Device is booting now and i dont have nothing to pick from because people can choose wrether to press power and continue to boot or hold volume up to go to recovery. But i can`t get anywhere because the phone just go straight to Device is booting now. I can`t get to fastboot, adb, erecovery, recovery or any kind of option instead of seeing Huawei logo when powering up and Device is booting now right after it. No sound from laptop when i connect usb and holding Volume down + Power. Nothing.
Any help would be really appreciated.
have you tried turning the phone on WHILE pressing those keys? volume up + power for recovery, or power down + power for fastboot?
SALVO9 said:
have you tried turning the phone on WHILE pressing those keys? volume up + power for recovery, or power down + power for fastboot?
Click to expand...
Click to collapse
yes, multiple times. that was the first thing to try. Anything else u could think of? :good:
What have you done?
So why is it bricked?
Schlengge said:
What have you done?
So why is it bricked?
Click to expand...
Click to collapse
Well, i updated to Nougat B336. It went all fine but it was slow. So i decided to downgrade to MM using oem-info after that flashing middle package and then MM. But in order to install these with Revolution Recovery you have to change data partition to f2fs than back to ext4 and then format data in order to be able to mount data. And then phone got bricked without any idea why. And then i tried numerous firmwares, extracting update packages flashing boot,cust and system. None of them made it. I had access to fastboot, recovery and emui recovery but recovies from huawei did nothing but to stop at 5% with package errors. Even ones from Huawei official website made exactly for VNS-L21 Dual Sim. The last thing i decided was to flash TWRP Meticulus because i thought partitioning will be better than Revolution but when i flash it i lost every access to this phone. No fastboot, adb, recovery, erecovery even dload\update.app on SD Card doesnt work. :good:
Drained battery in order to somehow make it to fastboot. No success. Even then when holding Vol+ + Vol- and Power i got to No battery symbol. When holding down Vol- + Power i got to Huawei logo and then straight to Device is booting now. If i just leave it as it is it goes to logo than Device is booting now... and nothing happens of course. Huawei got one of the worst support pages after Lenovo maybe. They are just useless
goretsov said:
Drained battery in order to somehow make it to fastboot. No success. Even then when holding Vol+ + Vol- and Power i got to No battery symbol. When holding down Vol- + Power i got to Huawei logo and then straight to Device is booting now. If i just leave it as it is it goes to logo than Device is booting now... and nothing happens of course. Huawei got one of the worst support pages after Lenovo maybe. They are just useless
Click to expand...
Click to collapse
When you connect the phone to the pc HiSuite launches?
Chisetdel31260 said:
When you connect the phone to the pc HiSuite launches?
Click to expand...
Click to collapse
Well, previously i always got in fastboot when i`m connected to HiSuite and click on Restore device (Not supported model for restore! Blaaa) but now i can`t connect even when i`m there. Can someone send me only the usb drivers for the VNS-L21 because i don`t have trust to this HiSuite thing? :highfive:
C`mon guys give us some ideas. I disassembled this little beast take off battery put usb in my laptop and then boom same thing. Huawei logo straight to Device is booting now...
You have to install hisuite because it needs the right drivers to run. Moreover it is a good indicator to know if there is a link between them.
Chisetdel31260 said:
You have to install hisuite because it needs the right drivers to run. Moreover it is a good indicator to know if there is a link between them.
Click to expand...
Click to collapse
Yes, i do know it and yes i do have it installed. This was the first thing i did when i bought this phone. I reinstalled it and it does not make any change. But i think there`s something not exactly right with the connection between the app and the phone because there`s no sound when plugging the phone. That`s a pretty solid clue that something is not right.
goretsov said:
Well, i updated to Nougat B336. It went all fine but it was slow. So i decided to downgrade to MM using oem-info after that flashing middle package and then MM. But in order to install these with Revolution Recovery you have to change data partition to f2fs than back to ext4 and then format data in order to be able to mount data. And then phone got bricked without any idea why. And then i tried numerous firmwares, extracting update packages flashing boot,cust and system. None of them made it. I had access to fastboot, recovery and emui recovery but recovies from huawei did nothing but to stop at 5% with package errors. Even ones from Huawei official website made exactly for VNS-L21 Dual Sim. The last thing i decided was to flash TWRP Meticulus because i thought partitioning will be better than Revolution but when i flash it i lost every access to this phone. No fastboot, adb, recovery, erecovery even dload\update.app on SD Card doesnt work. :good:
Click to expand...
Click to collapse
you could've flashed oeminfo in revolution recovery and then use the update.app of mm, no need to format the data partition.
have you tried booting to fastboot while connected with usb? and if you check device manager while connected, can you find your device in there?
mjz2cool said:
you could've flashed oeminfo in revolution recovery and then use the update.app of mm, no need to format the data partition.
have you tried booting to fastboot while connected with usb? and if you check device manager while connected, can you find your device in there?
Click to expand...
Click to collapse
Yes, i tried it as i said in the previous replies, no i can`t see it in device manager because Windows doesn`t recognise it when i plugged it to the usb ports. I say doesn`t recognise because there is no sound when the phone is being connected and i hold whichever combinations there are for VNS-L21. Thank you for your suggestion if you have any ideas i will appreciate them :highfive:
goretsov said:
Yes, i tried it as i said in the previous replies, no i can`t see it in device manager because Windows doesn`t recognise it when i plugged it to the usb ports. I say doesn`t recognise because there is no sound when the phone is being connected and i hold whichever combinations there are for VNS-L21. Thank you for your suggestion if you have any ideas i will appreciate them :highfive:
Click to expand...
Click to collapse
As i said i`ve read a lot of posts and comments of random users of P9 Lite and all of them doesn`t work for me. We need something out of the box, because i think this is not something you see every day. And it will be usefull to everyone who owns P9 Lite. :good:
goretsov said:
Yes, i tried it as i said in the previous replies, no i can`t see it in device manager because Windows doesn`t recognise it when i plugged it to the usb ports. I say doesn`t recognise because there is no sound when the phone is being connected and i hold whichever combinations there are for VNS-L21. Thank you for your suggestion if you have any ideas i will appreciate them :highfive:
Click to expand...
Click to collapse
did you check device manager itself? no sound playing doesn't mean the device isn't showing up in device manager, it is possible it shows up but isn't recognized. if device manager doesn't list it i haven't said anything
Used another pc
Chisetdel31260 said:
Used another pc
Click to expand...
Click to collapse
I`ll try another PC thank you for that advice. Well last time i checked device manager and nothing showed up even after scaning for changes nothing shows up. Interesting part is even without battery when usb is plugged in there`s no connection between PC and phone.
Can be battery and empty.
Connect it to a wall socket for 2 hours.
Chisetdel31260 said:
Can be battery and empty.
Connect it to a wall socket for 2 hours.
Click to expand...
Click to collapse
Nope i tried it. Doesn`t work. Another pc doesn`t recognize it too. Same thing. Can`t get into anything just logo and then Device is booting now. I`m starting to lose hope.
goretsov said:
Nope i tried it. Doesn`t work. Another pc doesn`t recognize it too. Same thing. Can`t get into anything just logo and then Device is booting now. I`m starting to lose hope.
Click to expand...
Click to collapse
I hope not to say stupidity.
So it makes see huawei logo. So it boots.
I think you deleted something at system.img.
So you have to take your time and make it go to fastboot and install recoverynougatb9, flash system.img b336, make it start again.
Hello, I'm new to xda, in fact I registered just to ask for help. My p9 lite got stuck on huawei logo, when i try to turn off the device it just reboots 2 times and then just stays on huawei logo. I can enter fastboot and rescue mode, but i have not enabled usb debugging and oem unlock on the device earlier. To be honest this is my first android device, in the past i used only windows phones, so you could say i'm completely new to this. Any suggestions on how to recover my phone or flash any rom into it? I'd be very glad if someone helped me find the solution to this problem. Not sure if i made a thread in the correct place, direct me if i'm mistaken
There are few different versions of P9 Lite, look at the back of the phone to the bottom to see the numbers beside VSN and let us know.
1) Also when the phone is turned off plug in the usb to a computer or charging adapter
2) Hold down volume up & power
3) Let go of the power button when you feel the buzz while still holding the volume up button
4) Download latest version & recovery.
5) Go to Settings>Developer Options>USB Debugging On
5B) If you don't see Developer Options in settings, then go to Settings>About Phone>Build Number & ( tap the Build Number untill it unlocks)
6) Update us on the status, hope it works out.
GloryNation said:
There are few different versions of P9 Lite, look at the back of the phone to the bottom to see the numbers beside VSN and let us know.
1) Also when the phone is turned off plug in the usb to a computer or charging adapter
2) Hold down volume up & power
3) Let go of the power button when you feel the buzz while still holding the volume up button
4) Download latest version & recovery.
5) Go to Settings>Developer Options>USB Debugging On
5B) If you don't see Developer Options in settings, then go to Settings>About Phone>Build Number & ( tap the Build Number untill it unlocks)
6) Update us on the status, hope it works out.
Click to expand...
Click to collapse
tried to enter recovery, still not work. can't go to developer options because phone is stuck on logo, can't power off. couldn't find any solution that works anywhere, been searching for more than 6 hours, still no use. phone model is VNS-L21 forgot to mention earlier
What exactly were you doing before this happened and does your computer recognize your phone when plugged in at all.
Try holding volume up & down together & plug phone in when it reboots on you, & report back with what you see. If anything at all.
GloryNation said:
What exactly were you doing before this happened and does your computer recognize your phone when plugged in at all.
Try holding volume up & down together & plug phone in when it reboots on you, & report back with what you see. If anything at all.
Click to expand...
Click to collapse
I tried to install nougat update, computer recognizes it only in fastboot. holding volume buttons haven't changed anything still no progress. the thing is i had installed nougat a moth or so ago and it worked fine, then rolled back to marshmallow and now this. i'm pretty sure i tried to install correct package, because it was the same i had installed earlier
Did you download a adb tool on your computer that have the 'fastboot.exe' file? If so open that folder,
Have the mouse curser hover in that folder, hold down shift & right click the mouse
Open command prompt
Connect phone as is in fastboot mode
Type adb devices & press enter
Type adb continue & press enter
Hi,
I have the same issue as ellanyx.
my phone can only be stucked while booting or if I connect my phone to a computer, I'm able to boot it in fastboot.
as ellanyx, I didn't enable usb-debug nor OEM unlock option...
so when I'm in fastboot, I type the command "fastboot oem unlock xxxxxx" (hopefully the different data needed are the correct ones mentioned on the box of the phone) I get this error message:
C:\Users\Dieu\Downloads\SRKToolHuawei-STABLE-V1.3-20160619>fastboot oem unlock xxxxx
...
FAILED (remote: Command not allowed)
finished. total time: 0.016s
and off course the other options like "fastboot flash recovery recovery.img "... doesn't work.
I can't use the adb commands neither.
when I type the commande, as mentioned above, "adb devices" or "adb continue", nothing works.
So I'm a bit desesperate
do you have any solution for this kind of issue?
thanks
Dude, so the last firmware on your phone was MM or N? If it was MM you should put stock firmware appropriate for your model in dload folder on SD card and put volume+volume-power, and thats it. If you stack on N,....then I dont know because dload method doesnt work with N, or maybe works if you can find stock firmware with recovery for N.
Regards
Unfortunately I can't update with the 3 button update otherwise it would indeed solvemy problem.
pyromana said:
Unfortunately I can't update with the 3 button update otherwise it would indeed solvemy problem.
Click to expand...
Click to collapse
Probably you didnt have correct Oeminfo for MM if dload method didnt work....Try to conect phone with Toolkit and follow procedure for flashing oeminfo and custombin, after that flash stock recovrry and b161 via dload metod. You will find it on forum here.
Regards
the procedure from SRK toolkit?
would it be possible to provide it? because I can't unlock the OEM and I didn't tick the USB debug think.
Maybe problem with the ps not phone so u can not connect with adb
Try with different pc you must have flash oem with fast boot without enable adb from phone if u in fastboot
I can only boot my phone in fastboot (vol- + power) and not in recovery (vol+ + power).
also when using the SRK toolkit, the first screen tells me to be sure that the usb debugging is enable, which I haven't done...
if I'm not mistaken, fastboot is to use the fastboot command and recovery the adb commands
the connection with fastboot works on my computer, the link is made. however when I type the command to unlock the OEM, I get an error stating that the command is not allowed.
when I use the SRK toolkit, with the different questions, he tries to connect the phone with adb and waiting.... waiting...
is there a command to reboot in recovery but from fastboot? in the otherway around it exists but it doesn't seem that from fastboot to recovery it exists.
thanks.
Alexxxx1 said:
Dude, so the last firmware on your phone was MM or N? If it was MM you should put stock firmware appropriate for your model in dload folder on SD card and put volume+volume-power, and thats it. If you stack on N,....then I dont know because dload method doesnt work with N, or maybe works if you can find stock firmware with recovery for N.
Regards
Click to expand...
Click to collapse
dload method works on N. I downgraded my phone from unofficial N update back to official MM update using this method yesterday. You just have to enable OEM at developer options on settings.
It looks like people can't be bothered to read the 1st post properly before they reply.
HE CAN NOT BOOT TO ANDROID SO HE CAN NOT ENABLE OEM OR ACTIVATE USB DEBUGGING!!!!
What he CAN do, is go into eRecovery and Fastboot.
With that in mind, I would suggest using the dload method through fastboot.
Also, make sure it is Huawei SRK Tools 2.0 that is used, as it actually asks if you are in debug mode or fastboot.
Note that there is a few bugs in SRK 2.0:
The TWRP recovery file has the wrong filename in the package, so it WILL fail unless you name it correctly.
Also, when trying to root, do NOT use the "P9 Lite" method as that WILL fail too. Use the "P9/P9 Plus" method.
I am trying to set up a complete guide that can restore the phone when it is stuck in fastboot, however I apparently went a step too far...
ellanyx said:
Hello, I'm new to xda, in fact I registered just to ask for help. My p9 lite got stuck on huawei logo, when i try to turn off the device it just reboots 2 times and then just stays on huawei logo. I can enter fastboot and rescue mode, but i have not enabled usb debugging and oem unlock on the device earlier. To be honest this is my first android device, in the past i used only windows phones, so you could say i'm completely new to this. Any suggestions on how to recover my phone or flash any rom into it? I'd be very glad if someone helped me find the solution to this problem. Not sure if i made a thread in the correct place, direct me if i'm mistaken[/QUOTE
Do you have TWRP recovery ?
---------- Post added at 09:55 AM ---------- Previous post was at 09:50 AM ----------
ellanyx said:
Hello, I'm new to xda, in fact I registered just to ask for help. My p9 lite got stuck on huawei logo, when i try to turn off the device it just reboots 2 times and then just stays on huawei logo. I can enter fastboot and rescue mode, but i have not enabled usb debugging and oem unlock on the device earlier. To be honest this is my first android device, in the past i used only windows phones, so you could say i'm completely new to this. Any suggestions on how to recover my phone or flash any rom into it? I'd be very glad if someone helped me find the solution to this problem. Not sure if i made a thread in the correct place, direct me if i'm mistaken
Click to expand...
Click to collapse
Boot into fastboot mode and flash a custom recovery by meticulus. Link : meticulus.co.vu
Then whenyou get stuck hold power and vol down button for 2 minutes the phone will reboot and then when it says that your device has been unlocked and cant be trusted then only press vol up key ( dont press power button then). The u get into huawei recovery. From that u should power off the phone. Now get a custom rom by meticulus into your device sd card ( Cyanogenmod 13 is recommended ). Then insert sd card in a powered off phone. Now press vol up and power key and flash gapps and custom rom and you are good to go.
Click to expand...
Click to collapse
So, MY question:
I have tried 4 times to get Nougat installed, but every time I got the SMALL package (1.25gb) which means it is not complete.
I decided to try ONE more time, but think I have made a serious mistake.
I was on B161 and tried to downgrade to B160 without upgrading to Nougat first.
This has caused my phone to be stuck at boot with the message "Your device is booting now..."
I can NOT get into eRecovery or fastboot no matter what I do.
If I just leave the phone, then it discharge very fast, but as soon as I plug it in, it starts up and gets stuck at the same screen again.
Does anyone have ANY idea about how I can get out of this problem?
UPDATE:
I have managed to boot to fastboot while connected to my pc.
The phone is unlocked but FRP is LOCKED, which means I can't flash anything.
I read about using Miracle Loader to remove the FRP lock, but it can't "see" my phone. Maybe I am doing it wrong?
SnowmanDK said:
So, MY question:
I have tried 4 times to get Nougat installed, but every time I got the SMALL package (1.25gb) which means it is not complete.
I decided to try ONE more time, but think I have made a serious mistake.
I was on B161 and tried to downgrade to B160 without upgrading to Nougat first.
This has caused my phone to be stuck at boot with the message "Your device is booting now..."
I can NOT get into eRecovery or fastboot no matter what I do.
If I just leave the phone, then it discharge very fast, but as soon as I plug it in, it starts up and gets stuck at the same screen again.
Does anyone have ANY idea about how I can get out of this problem?
UPDATE:
I have managed to boot to fastboot while connected to my pc.
The phone is unlocked but FRP is LOCKED, which means I can't flash anything.
I read about using Miracle Loader to remove the FRP lock, but it can't "see" my phone. Maybe I am doing it wrong?
Click to expand...
Click to collapse
Try to relock and then unlock the bootloader again. And make sure oem unlocking is enabled in dev options
Arsaam said:
Try to relock and then unlock the bootloader again. And make sure oem unlocking is enabled in dev options
Click to expand...
Click to collapse
Please read my previous post again
I can NOT boot normally. And as FRP is locked, then I can't relock or unlock the bootloader.
SnowmanDK said:
Please read my previous post again
I can NOT boot normally. And as FRP is locked, then I can't relock or unlock the bootloader.
Click to expand...
Click to collapse
Go to fast boot mode and from their try to flash meticulus recovery.
You can also try the adb method as well.
Visit meticulus.co.vu
Hi,
I bricked my Huawei P8 Lite by accident when I tried to root it after unlocking bootloader. I can't post links here yet but I followed Rootjunky.com's Youtube video "How to Root the Huawei P8 Lite Android phone" and while I was in the process of installing SuperSU it froze on the logo startup screen and won't go past it. People say in the comments that this happens with the 6.0 version but I'm not sure what I have. I've tried rebooting using power button plus down and can get to the recovery mode screen and hit "eRecovery" but it won't connect with the wifi.
Is there any way I can solve this? I am desperate! I have the "Minimal ADB and Fastboot" program on my PC. Is there something I can do from the fastboot screen on the phone?
Help please!
Try using marahmallow latest update.app and after that lollipop rollback update.app, put into dload folder on sdcafd and hold volume up + volume down + power until update starts
aciupapa said:
Try using marahmallow latest update.app and after that lollipop rollback update.app, put into dload folder on sdcafd and hold volume up + volume down + power until update starts
Click to expand...
Click to collapse
Hey, thanks, but I'm not sure on how to do this. I don't have much experience with the technical side of this and I'm not really sure how to go about doing what you suggest here. Do you mean put the downloads on the sd-card on my phone? My phone don't show up on my pc since it gets stuck in start-up mode so how would I do that?
Thanks for your patience with an imbecille!
Olawlaw said:
Hey, thanks, but I'm not sure on how to do this. I don't have much experience with the technical side of this and I'm not really sure how to go about doing what you suggest here. Do you mean put the downloads on the sd-card on my phone? My phone don't show up on my pc since it gets stuck in start-up mode so how would I do that?
Thanks for your patience with an imbecille!
Click to expand...
Click to collapse
Here you have a really nice guide with links etc https://huaweifirmware.com/huawei-p8-lite/
Make sure to label the folders correctly. Use an adapter or another phone to connect microsdcard to your computer Try to use the second, marshmallow part. if ot doesnt work try two other methods. Choose files accordingly (single sim or dual sim) Hope you will fix your phone
Phew! Okay, so I got it to work! For anyone out there with the same problem, I got it to work by entering the fastboot screen on the phone by holding down the power button plus the volume down button, connecting it to my PC and then using the command prompt program 'Minimal ADB and Fastboot' to flash the files BOOT.img, RECOVERY.img and SYSTEM.img (using the command "fastboot flash boot filename FILENAME.img") that I got from Huawei's official UPDATE.app file and extracted with Huawei Update Extractor.
I didn't know what Firmware build to get so I got the B630 Android Marshmallow 6.0 for my model ALE-L21 (Dual SIM). It worked, but can anyone tell me if this is the right build, and how do I know which one is the right one if I can't access the old info on my phone? Is it even the latest one? I'm in Europe.
Hello,
I have a Huawei P8 Lite (ALE-L21) phone with this error: FUNC 8 : HIFI Image, Error 1 Security Verify failed. I think I have tried everything to fix it but had no success, hence why I have decided to create this thread.
As you can figure out, the phone does not turn on, it only shows the huawei logo and shuts down. When pressing VOLUME UP + DOWN and POWER button, it used to show the HIFI image error screen, however when I press the key combination now, it only shows a red screen and turns off. I am able to enter fastboot and rescue mode by holding down the VOLUME DOWN button and plugging in a USB cable to the phone from a computer. Apart from that, I can't do anything else with the phone. (I do not have any software related to the phone installed (HiSuite), no backups, no nothing because the phone actually isn't mine and I have never actually played with it and androids in general.)
There are some similar threads and videos here:
https://forum.xda-developers.com/p8lite/help/stuck-rescue-mode-fastbootrescue-mode-t3648105
https://forum.xda-developers.com/p8lite/help/stuck-rescue-mode-screen-please-help-t3244872
https://forum.xda-developers.com/mate-10/how-to/how-to-huawei-mate-10-pro-standard-t3709535
https://forum.xda-developers.com/honor-5c/help/writing-recovery-failed-remote-command-t3584208
https://forum.xda-developers.com/p8lite/help/huawei-p8-blinks-red-green-green-red-t3546038
https://youtu.be/UYmDBD7t1iM
I have tried a lot of things to make the phone work again but nothing worked.
Recovery mode using HiSuite - "Your device is not supported for system recovery"
I have tried flashing different ROM's using fastboot - when I try flashing it says "FAILED - command not allowed", which I assume is beacuse the bootloader is locked?
installing a ROM using a SD card (Force update or something) - the red screen shows and the phone shuts down
Huawei Update Extractor - updating specific files e.g. boot.img, still not allowed to flash
TWRP - the same error ( not allowed )
Rollback to the previous versions using fastboot - not allowed
At some point I was able to wipe the cache on the phone, not sure if that matters anyhow.
When I am in the fastboot & rescue mode, there is a text in green saying "Phone LOCKED", which I assume means that the bootloader is locked? So, I was trying to get the bootloader unlocked, however found no success. I have also tried emailing Huawei support to get the bootloader code, however as you may know, they did not want to provide the code.
I was able to extract some information from the phone though, using these commands: https://forum.xda-developers.com/showpost.php?p=70483520&postcount=2
To get the bootloader code I have tried:
dc-unlocker - I think you need a working phone and have usb drivers installed for this to work and also I think you have to pay for this service
Kingroot + fastboot - https://forum.xda-developers.com/p8lite/general/alternative-method-unlocking-bootloader-t3799294
Emailing Huawei support for the code - they don't want to provide one
https://forum.xda-developers.com/huawei-p8/help/bootloader-unlock-unlock-code-huawei-t3792987
Does anyone have any suggestions on how to resolve the problem, or is it unsolvable? I would prefer to do it myself and not send the phone to Huawei or whoever as I would like to spend the least money possible. Also the warranty is long gone, since the phone has been bought in 2015.
Cheers
I have same issue, please anybody help
Exact same problem here, any help would be great.