Stuck on bootloop after SIM Card intrested - Galaxy Y GT-S5360 and Duos 6102 Q&A, Help & Troubl

I'm using CM11 Material and when I take SIM works good but when I interest it after logo stucks on bootloop
I have Samsung Galaxy Y GT-S5360
Help me

well,you need to go back to stock rom via odin ,then install the correct baseband,stock rom for your region . ex : dxmj1 is for south east asia,etc

vdhero said:
well,you need to go back to stock rom via odin ,then install the correct baseband,stock rom for your region . ex : dxmj1 is for south east asia,etc
Click to expand...
Click to collapse
I installed my region ROM via ODIN but it isnt fixed. What should I do?

Erfan MG said:
I installed my region ROM via ODIN but it isnt fixed. What should I do?
Click to expand...
Click to collapse
try others. every region have about 2 or 3 roms

Related

about omega rom updade

hi guys i have s4 9505 with omega rom v21.1 and if i want to update to v28 should i instal first bloatware and modem which are written in instal guide for v28 tnx
digitaldevil said:
hi guys i have s4 9505 with omega rom v21.1 and if i want to update to v28 should i instal first bloatware and modem which are written in instal guide for v28 tnx
Click to expand...
Click to collapse
You can just flash the latest omega rom mate and make sure your doing a fullwipe so you wont get any problem later. And dont forget to make a backup first incase something will happen. About the modem , if your not having any problem with signal issue after flashing the v2x then no need to flash any modem. And Feel free to check sammobile for the modem you need that base from your country/provider and download the modem/lte from here and flash it via odin .
...
Repulsa said:
You can just flash the latest omega rom mate and make sure your doing a fullwipe so you wont get any problem later. And dont forget to make a backup first incase something will happen. About the modem , if your not having any problem with signal issue after flashing the v2x then no need to flash any modem. And Feel free to check sammobile for the modem you need that base from your country/provider and download the modem/lte from here and flash it via odin .
...
Click to expand...
Click to collapse
in the checking site are 4 ways, 3 are the mobile operators and one is BLG for my country Bulgaria and when i checked all 4 at the end are not XXUFNA5 like is in my phone now so what to do and which should i choose or do i need to change my, soon ill go in another country will this make problem with the modem if i get now this for my country tnx
digitaldevil said:
in the checking site are 4 ways, 3 are the mobile operators and one is BLG for my country Bulgaria and when i checked all 4 at the end are not XXUFNA5 like is in my phone now so what to do and which should i choose or do i need to change my, soon ill go in another country will this make problem with the modem if i get now this for my country tnx
Click to expand...
Click to collapse
Best thing you can do is stay on Fn5 modem then flash the latest version of Omega rom , If your having any Dropping signal issue then flash the modem base from your Provider , But feel free to flash the FNC4 modem since that's the latest one for your Country !
Repulsa said:
Best thing you can do is stay on Fn5 modem then flash the latest version of Omega rom , If your having any Dropping signal issue then flash the modem base from your Provider , But feel free to flash the FNC4 modem since that's the latest one for your Country !
Click to expand...
Click to collapse
and i have done it like that just flashed the 28v rom in cwm and nothing more for now i dont have any problem with my old modem tnx

HELP!! flashing fimware through odin failed on samsun galaxy grand prime

I flashed the latest update of firmware of galaxy grand prime through odin but when i click start it fails to flash the firmware.. is it because of the knox? Or what?. Anyone here can help me..? :crying:
daganteng15 said:
I flashed the latest update of firmware of galaxy grand prime through odin but when i click start it fails to flash the firmware.. is it because of the knox? Or what?. Anyone here can help me..? :crying:
Click to expand...
Click to collapse
Is your phone still working? Which firmware is actually installed? Which firmware you want to flash?
regards
LS.xD said:
Is your phone still working? Which firmware is actually installed? Which firmware you want to flash?
regards
Click to expand...
Click to collapse
I buy my grand prime last year.. dec.. there are some updates from sammobile for my grand prime i downloaded.. i have flashed it but failed.. i tried it many times but. Still the same. I downloaded the correct firmware and region.. and also in the ota it also says the latest updates have been installed.. but there are already two updates of it..can you help me for this sir?.
daganteng15 said:
I buy my grand prime last year.. dec.. there are some updates from sammobile for my grand prime i downloaded.. i have flashed it but failed.. i tried it many times but. Still the same. I downloaded the correct firmware and region.. and also in the ota it also says the latest updates have been installed.. but there are already two updates of it..can you help me for this sir?.
Click to expand...
Click to collapse
Please tell me which firmware version is actually installed and which version you want to flash? Which region is your phone?
@LS.xD
i have the same problem with daganteng15, my current firmware installed on my galaxy grand prime is with CSC G530HOLB1ANL1 (XTC openline for Philippines) and now there is two new update in sammobile which is with CSC G530HOLB1ANL3 and the latest CSC G530HOLBAOA2 i tried to flash this two new firmware via ODIN 3.09 but both failed, in ODIN it always say "Fail Auth"
i am sure that i downloaded the correct firmarwe for our region. can you help us Please...
Thanks in advance.
3xhon said:
@LS.xD
i have the same problem with daganteng15, my current firmware installed on my galaxy grand prime is with CSC G530HOLB1ANL1 (XTC openline for Philippines) and now there is two new update in sammobile which is with CSC G530HOLB1ANL3 and the latest CSC G530HOLBAOA2 i tried to flash this two new firmware via ODIN 3.09 but both failed, in ODIN it always say "Fail Auth"
i am sure that i downloaded the correct firmarwe for our region. can you help us Please...
Thanks in advance.
Click to expand...
Click to collapse
Yah.. were the same.. there are two new update on grand prime XTC Philippines (open line) but cant flash in odin. And also can not update the device in OTA. Please help.
This device have secure bootloader, so might be the reason u cant flash updated firmware, only OTA update. IMO need to unlock bootloader first if wanna success flash through odin.
Until now, the way to unlock this device bootloader is unavailable.
Shinkumara said:
This device have secure bootloader, so might be the reason u cant flash updated firmware, only OTA update. IMO need to unlock bootloader first if wanna success flash through odin.
Until now, the way to unlock this device bootloader is unavailable.
Click to expand...
Click to collapse
To upgrade the device is not necesarry to download the firmware of the respective region, u can flash any version of firmware for another regions, the only need to know is the respective version of firmware is for your device only that, i have flashed many firmware in my prime without issues ever from other regions ( most actual than my original region ) and y device is working ike a charm
Have you rooted the phone?
Can u elaborate what means.of.respective version please? u said that u flash many firmware for ur prime, which.one firmware have u been flashed successfully @tutibreaker
Hello guys I have solve this issue by flashing different firmware I used Nepal firmware. XTC firmware is corrupted.
You can use different region firmware if your phone is openline.
You can read my posts here
http://forum.xda-developers.com/gra...ully-rooted-galaxy-grand-prime-t2935607/page8
Shinkumara said:
Can u elaborate what means.of.respective version please? u said that u flash many firmware for ur prime, which.one firmware have u been flashed successfully @tutibreaker
Click to expand...
Click to collapse
no i dont flash many versions in my device, just flash the latest update from other region and works fine, the region is not important
Hey, same problem here. I can't flash any firmware. Odin just errors: Failed [Auth].
And since I've rooted my Grand Prime, I'm not able to update it via OTA
What am I supposed to do?!
Recently I've faced some lags on my phone that I don't know why, but I think I need to update my firmware.
Apocalypse Now said:
Hey, same problem here. I can't flash any firmware. Odin just errors: Failed [Auth].
And since I've rooted my Grand Prime, I'm not able to update it via OTA
What am I supposed to do?!
Recently I've faced some lags on my phone that I don't know why, but I think I need to update my firmware.
Click to expand...
Click to collapse
What firmware did you flash? If its XTC then you should try other region firmware like Malaysia or Indonesia. XTC firmware is corrupted.
vancer32 said:
What firmware did you flash? If its XTC then you should try other region firmware like Malaysia or Indonesia. XTC firmware is corrupted.
Click to expand...
Click to collapse
Solved it. Thanks. I should have flashed a newer version of firmware; I flashed Kazakhstan and it went OK.
daganteng15 said:
I flashed the latest update of firmware of galaxy grand prime through odin but when i click start it fails to flash the firmware.. is it because of the knox? Or what?. Anyone here can help me..? :crying:
Click to expand...
Click to collapse
You have to flash exact soft for your region and phone. Grand Prime have many versions so you must select right one. In East Europe there is no secure bootloader or maybe I haven't encountered it yet. If you have secured bootloader so probably it's gonna be same like Sony or HTC. You'll have to unlock it. I can't say where
daganteng15 said:
I flashed the latest update of firmware of galaxy grand prime through odin but when i click start it fails to flash the firmware.. is it because of the knox? Or what?. Anyone here can help me..? :crying:
Click to expand...
Click to collapse
Just open your odin then firstly do not connect your device before . Add the files to AP first and then you can connect your device into odin or that firmware you've download did not match .
And did you solve that problem guys?
awha said:
Just open your odin then firstly do not connect your device before . Add the files to AP first and then you can connect your device into odin or that firmware you've download did not match .
Click to expand...
Click to collapse
The order did not do any difference. Why should it do?!
Before a chance the rom, I rooted my cellphone by this way
[ androidxda. com/root-samsung-galaxy-grand-prime-sm-g530h ]
It worked!
As someone said here, I should need to unlock the bootloader, I looked for I solution and I find this one
[ techtudo. com.br/dicas-e-tutoriais/noticia/2014/07/como-destravar-o-bootloader-de-um-dispositivo-android.html ]
this site is in portuguese-Br
it did not work
so, I installed samsung kies, and odin 3.04. And also didn't worked.
Now, I installed CMW recovery
[ mediafire .com/download/w0gzfrq7xtvztdr/Galaxy+Grand+Prime+CWM+Recovery.zip ]
still the same
finally, I downloaded odin 3.10.6, and instal a rom from india. As I find here [ droidviews .com/install-android-5-0-2-lollipop-firmware-on-galaxy-grand-prime-sm-g530h/ ]
Before I was trying Russia's rom.
After all, I noticed, and I read here, that depends on firmware which I was intalling

[Q] does flashing a custom recovery can hard brick my phone?

so i want to flash twrp in my S5 sm-g9009d , but im not sure if my model is supported , as it only says klte in twrp page (which i dont know if that's my device type , nor can i find any info about it :/ )
so what's the worst that can happen ?
Hi, Rinyumi ,
No, but there is red alert for all flash
You are lonely responsible of your fone
the Best way in this case hardbrick
In my idea is to flash last officiel
firmware or (stock rom )of your country with Odin
yanis488 said:
Hi, Rinyumi ,the Best way in this case
In my idea is to flash last officiel
firmware or (stock rom )of your country with Odin
Click to expand...
Click to collapse
there is no stock ROM for my country , the official firmwares are all chinese
that's why i need a custom recovery for backup , bcs i want to try and install another model's firmware ( sm-g900fd) for my (sm-g9009d )...which i dont know how it'll end up , and i deffinantly cant afford to hard bick my phone
Perhaps if You Read this :*xda-dev :
*Galaxy S 5 Q&A, Help & Troubleshooting
**Galaxy S5 Dual SIM [SM-G9009D] by*rankoradza
You will have an idea
yanis488 said:
Perhaps if You Read this :*xda-dev :
*Galaxy S 5 Q&A, Help & Troubleshooting
**Galaxy S5 Dual SIM [SM-G9009D] by*rankoradza
You will have an idea
Click to expand...
Click to collapse
thanks, i was able to open the 2ed sim card but i still cant get 3G
rinyumi said:
so i want to flash twrp in my S5 sm-g9009d , but im not sure if my model is supported , as it only says klte in twrp page (which i dont know if that's my device type , nor can i find any info about it :/ )
so what's the worst that can happen ?
Click to expand...
Click to collapse
rinyumi said:
there is no stock ROM for my country , the official firmwares are all chinese
that's why i need a custom recovery for backup , bcs i want to try and install another model's firmware ( sm-g900fd) for my (sm-g9009d )...which i dont know how it'll end up , and i deffinantly cant afford to hard bick my phone
Click to expand...
Click to collapse
hi
you can see your Phone Model if you enter it in Download Mode.
Flash a Wrong custom Rom will not hard brick your Phone.
every rom has a tool To check If the rom working With your rom or not and will not allow to do a flash if it is not for your model
if you want i stock rom you can use this
Model: SM-G900F
Model name: GALAXY S5
Country: United Arab Emirates
Version: Android 5.0
Changelist: 4920419
Build date: Mon, 18 May 2015 06:32:47 +0000
Product Code: XSG
PDA: G900FXXU1POEC
CSC: G900FOJV1POF1
https://xq55.app.box.com/s/m5x27z7l0c0neoqpxsvp9pz417orrr95
ahmedsaber20005 said:
hi
you can see your Phone Model if you enter it in Download Mode.
Flash a Wrong custom Rom will not hard brick your Phone.
every rom has a tool To check If the rom working With your rom or not and will not allow to do a flash if it is not for your model
if you want i stock rom you can use this
Model: SM-G900F
Model name: GALAXY S5
Country: United Arab Emirates
Version: Android 5.0
Changelist: 4920419
Build date: Mon, 18 May 2015 06:32:47 +0000
Product Code: XSG
PDA: G900FXXU1POEC
CSC: G900FOJV1POF1
https://xq55.app.box.com/s/m5x27z7l0c0neoqpxsvp9pz417orrr95
Click to expand...
Click to collapse
hi Ahmed thank you for repleying , I need a little more of ur help
the stock Rom u mentioned is for a not Duel SIM phone right? is that ok,? bcs my phone is duel Sim and im afraid ill loose the network
rinyumi said:
hi Ahmed thank you for repleying , I need a little more of ur help
the stock Rom u mentioned is for a not Duel SIM phone right? is that ok,? bcs my phone is duel Sim and im afraid ill loose the network
Click to expand...
Click to collapse
yes this right
give me your model Number form download mode
ahmedsaber20005 said:
yes this right
give me your model Number form download mode
Click to expand...
Click to collapse
sm-g9009d
rinyumi said:
hi Ahmed thank you for repleying , I need a little more of ur help
the stock Rom u mentioned is for a not Duel SIM phone right? is that ok,? bcs my phone is duel Sim and im afraid ill loose the network
Click to expand...
Click to collapse
rinyumi said:
sm-g9009d
Click to expand...
Click to collapse
http://samsung-updates.com/device/?id=SM-G9009D
see this
thank you so much for keeping up with me , but all the firmwares are chinese (CTC)
hey what if i can flash another firmware for another duel sim S5 ,is there a chance ill loose my network?
i want to flash sm-g900fd
ahmedsaber20005 said:
http://samsung-updates.com/device/?id=SM-G9009D
see this
Click to expand...
Click to collapse
thank you so much for keeping up with me , but all the firmwares are chinese (CTC)
hey what if i can flash another firmware for another duel sim S5 ,is there a chance ill loose my network?
i want to flash sm-g900fd
rinyumi said:
thank you so much for keeping up with me , but all the firmwares are chinese (CTC)
hey what if i can flash another firmware for another duel sim S5 ,is there a chance ill loose my network?
i want to flash sm-g900fd
Click to expand...
Click to collapse
i don't know but i think your phone get a soft brick
try this app
https://play.google.com/store/apps/details?id=jp.co.c_lis.ccl.morelocale&hl=en
check here... http://www.sammobile.com/firmwares/database/SM-G9009D/ all chinesse, but if you want install a rom from other device at least dont flash modem and bootloader, this will break all
ahmedsaber20005 said:
i don't know but i think your phone get a soft brick
try this app
https://play.google.com/store/apps/details?id=jp.co.c_lis.ccl.morelocale&hl=en
Click to expand...
Click to collapse
thanks a lot , the app really helped , and now i can get even arabic on my phone ^_^
im thinking of letting my phone be , as much as im hating it , i really cant risk hard bricking
thank u so much for ur help , i really appreciate that u stayed all this long trying to help me
rinyumi said:
thanks a lot , the app really helped , and now i can get even arabic on my phone ^_^
im thinking of letting my phone be , as much as im hating it , i really cant risk hard bricking
thank u so much for ur help , i really appreciate that u stayed all this long trying to help me
Click to expand...
Click to collapse
Any time
Have a great day [emoji1]
Sent from my SM-G900F using Tapatalk
Fevax said:
check here... http://www.sammobile.com/firmwares/database/SM-G9009D/ all chinesse, but if you want install a rom from other device at least dont flash modem and bootloader, this will break all
Click to expand...
Click to collapse
isnt the bootloader and the modem included in the stock firmware file (downloaded from sammobile) ?
rinyumi said:
isnt the bootloader and the modem included in the stock firmware file (downloaded from sammobile) ?
Click to expand...
Click to collapse
Yeah are included, you have to extract the zip, remove the .md5 and extract again, and use only system.img... search you will find how to make flasheable by odin again
Fevax said:
Yeah are included, you have to extract the zip, remove the .md5 and extract again, and use only system.img... search you will find how to make flasheable by odin again
Click to expand...
Click to collapse
ok thank you so much , ill look for it

Accidentally Flash a new firmware without back up. LOST IMEI. pls help :crying:

I have a new galaxy note 4 . it was locked on 1 carrier on our country and i tried to flash a new firmware to install a custom rom. what happens after is that my IMEI is changed and it says i dont have any network or out of service . PLS help. ive been trying to find the original firmware and do some various things like rooting and changing imei but still nothing has change.
TatsuyaKaneki2015 said:
I have a new galaxy note 4 . it was locked on 1 carrier on our country and i tried to flash a new firmware to install a custom rom. what happens after is that my IMEI is changed and it says i dont have any network or out of service . PLS help. ive been trying to find the original firmware and do some various things like rooting and changing imei but still nothing has change.
Click to expand...
Click to collapse
Download original firmware for your device from sammobile & flash using odin.
RishiChhikkara said:
Download original firmware for your device from sammobile & flash using odin.
Click to expand...
Click to collapse
The problem also is i dunno how to find the original firmware . Ive really appreciated if u know sir how to find my original firmare. ive been downloading firmwares from sammobile but sad to say i havent found the right one. I also tried to use kies to install the original firmware but theres an error .
TatsuyaKaneki2015 said:
The problem also is i dunno how to find the original firmware . Ive really appreciated if u know sir how to find my original firmare. ive been downloading firmwares from sammobile but sad to say i havent found the right one. I also tried to use kies to install the original firmware but theres an error .
Click to expand...
Click to collapse
Is it an unlocked device or carrier locked?, Mention your model no also.

Boot loop (Non-rooted) Samsung S7 Edge

Hi,
Please help me. My phone started boot loops after I did a factory reset using the settings and I did a second factory reset manually still, boot loop happens. I really don't know what to do. Please help me. I have downloaded a Odin app but I do not know how to find a ROM and my phone is not rooted. It is from Riyadh, Saudi Arabia (+966) but currently I am here in Philippines (+63). Thank you!
download firmware from sammobile and use odin (search on youtube) to flash stock rom.
make sure you get rom for specific model i.e. 935f
yaro666 said:
download firmware from sammobile and use odin (search on youtube) to flash stock rom.
make sure you get rom for specific model i.e. 935f
Click to expand...
Click to collapse
Okay, will try that!
yaro666 said:
download firmware from sammobile and use odin (search on youtube) to flash stock rom.
make sure you get rom for specific model i.e. 935f
Click to expand...
Click to collapse
I can't download there. It says that free downloads are disable until Monday.
here

Categories

Resources