I flashed the latest update of firmware of galaxy grand prime through odin but when i click start it fails to flash the firmware.. is it because of the knox? Or what?. Anyone here can help me..? :crying:
daganteng15 said:
I flashed the latest update of firmware of galaxy grand prime through odin but when i click start it fails to flash the firmware.. is it because of the knox? Or what?. Anyone here can help me..? :crying:
Click to expand...
Click to collapse
Is your phone still working? Which firmware is actually installed? Which firmware you want to flash?
regards
LS.xD said:
Is your phone still working? Which firmware is actually installed? Which firmware you want to flash?
regards
Click to expand...
Click to collapse
I buy my grand prime last year.. dec.. there are some updates from sammobile for my grand prime i downloaded.. i have flashed it but failed.. i tried it many times but. Still the same. I downloaded the correct firmware and region.. and also in the ota it also says the latest updates have been installed.. but there are already two updates of it..can you help me for this sir?.
daganteng15 said:
I buy my grand prime last year.. dec.. there are some updates from sammobile for my grand prime i downloaded.. i have flashed it but failed.. i tried it many times but. Still the same. I downloaded the correct firmware and region.. and also in the ota it also says the latest updates have been installed.. but there are already two updates of it..can you help me for this sir?.
Click to expand...
Click to collapse
Please tell me which firmware version is actually installed and which version you want to flash? Which region is your phone?
@LS.xD
i have the same problem with daganteng15, my current firmware installed on my galaxy grand prime is with CSC G530HOLB1ANL1 (XTC openline for Philippines) and now there is two new update in sammobile which is with CSC G530HOLB1ANL3 and the latest CSC G530HOLBAOA2 i tried to flash this two new firmware via ODIN 3.09 but both failed, in ODIN it always say "Fail Auth"
i am sure that i downloaded the correct firmarwe for our region. can you help us Please...
Thanks in advance.
3xhon said:
@LS.xD
i have the same problem with daganteng15, my current firmware installed on my galaxy grand prime is with CSC G530HOLB1ANL1 (XTC openline for Philippines) and now there is two new update in sammobile which is with CSC G530HOLB1ANL3 and the latest CSC G530HOLBAOA2 i tried to flash this two new firmware via ODIN 3.09 but both failed, in ODIN it always say "Fail Auth"
i am sure that i downloaded the correct firmarwe for our region. can you help us Please...
Thanks in advance.
Click to expand...
Click to collapse
Yah.. were the same.. there are two new update on grand prime XTC Philippines (open line) but cant flash in odin. And also can not update the device in OTA. Please help.
This device have secure bootloader, so might be the reason u cant flash updated firmware, only OTA update. IMO need to unlock bootloader first if wanna success flash through odin.
Until now, the way to unlock this device bootloader is unavailable.
Shinkumara said:
This device have secure bootloader, so might be the reason u cant flash updated firmware, only OTA update. IMO need to unlock bootloader first if wanna success flash through odin.
Until now, the way to unlock this device bootloader is unavailable.
Click to expand...
Click to collapse
To upgrade the device is not necesarry to download the firmware of the respective region, u can flash any version of firmware for another regions, the only need to know is the respective version of firmware is for your device only that, i have flashed many firmware in my prime without issues ever from other regions ( most actual than my original region ) and y device is working ike a charm
Have you rooted the phone?
Can u elaborate what means.of.respective version please? u said that u flash many firmware for ur prime, which.one firmware have u been flashed successfully @tutibreaker
Hello guys I have solve this issue by flashing different firmware I used Nepal firmware. XTC firmware is corrupted.
You can use different region firmware if your phone is openline.
You can read my posts here
http://forum.xda-developers.com/gra...ully-rooted-galaxy-grand-prime-t2935607/page8
Shinkumara said:
Can u elaborate what means.of.respective version please? u said that u flash many firmware for ur prime, which.one firmware have u been flashed successfully @tutibreaker
Click to expand...
Click to collapse
no i dont flash many versions in my device, just flash the latest update from other region and works fine, the region is not important
Hey, same problem here. I can't flash any firmware. Odin just errors: Failed [Auth].
And since I've rooted my Grand Prime, I'm not able to update it via OTA
What am I supposed to do?!
Recently I've faced some lags on my phone that I don't know why, but I think I need to update my firmware.
Apocalypse Now said:
Hey, same problem here. I can't flash any firmware. Odin just errors: Failed [Auth].
And since I've rooted my Grand Prime, I'm not able to update it via OTA
What am I supposed to do?!
Recently I've faced some lags on my phone that I don't know why, but I think I need to update my firmware.
Click to expand...
Click to collapse
What firmware did you flash? If its XTC then you should try other region firmware like Malaysia or Indonesia. XTC firmware is corrupted.
vancer32 said:
What firmware did you flash? If its XTC then you should try other region firmware like Malaysia or Indonesia. XTC firmware is corrupted.
Click to expand...
Click to collapse
Solved it. Thanks. I should have flashed a newer version of firmware; I flashed Kazakhstan and it went OK.
daganteng15 said:
I flashed the latest update of firmware of galaxy grand prime through odin but when i click start it fails to flash the firmware.. is it because of the knox? Or what?. Anyone here can help me..? :crying:
Click to expand...
Click to collapse
You have to flash exact soft for your region and phone. Grand Prime have many versions so you must select right one. In East Europe there is no secure bootloader or maybe I haven't encountered it yet. If you have secured bootloader so probably it's gonna be same like Sony or HTC. You'll have to unlock it. I can't say where
daganteng15 said:
I flashed the latest update of firmware of galaxy grand prime through odin but when i click start it fails to flash the firmware.. is it because of the knox? Or what?. Anyone here can help me..? :crying:
Click to expand...
Click to collapse
Just open your odin then firstly do not connect your device before . Add the files to AP first and then you can connect your device into odin or that firmware you've download did not match .
And did you solve that problem guys?
awha said:
Just open your odin then firstly do not connect your device before . Add the files to AP first and then you can connect your device into odin or that firmware you've download did not match .
Click to expand...
Click to collapse
The order did not do any difference. Why should it do?!
Before a chance the rom, I rooted my cellphone by this way
[ androidxda. com/root-samsung-galaxy-grand-prime-sm-g530h ]
It worked!
As someone said here, I should need to unlock the bootloader, I looked for I solution and I find this one
[ techtudo. com.br/dicas-e-tutoriais/noticia/2014/07/como-destravar-o-bootloader-de-um-dispositivo-android.html ]
this site is in portuguese-Br
it did not work
so, I installed samsung kies, and odin 3.04. And also didn't worked.
Now, I installed CMW recovery
[ mediafire .com/download/w0gzfrq7xtvztdr/Galaxy+Grand+Prime+CWM+Recovery.zip ]
still the same
finally, I downloaded odin 3.10.6, and instal a rom from india. As I find here [ droidviews .com/install-android-5-0-2-lollipop-firmware-on-galaxy-grand-prime-sm-g530h/ ]
Before I was trying Russia's rom.
After all, I noticed, and I read here, that depends on firmware which I was intalling
Hello everyone,
My device got bricked since I flashed it with Odin yesterday, and now even I re-flash using official firmware, it failed as well……
The model of my phone showing in Samsung official site is G935-P (Sprint version), But that shows on download mode is G935U, maybe the eBay seller had flashed it with G935U firmware…
What version of firmware should I download to recover the OS now? And what could I do to Un-brick my device? Someone who could give me some advice or assistance? Thank you all!
Try Smart Switch. It will automatically download the correct firmware for you.
Hmmmmm what update were you trying to flash in odin and i would check the back of your phone bc it should say exactly what model it is (935x) just to be sure then flash the LASTEST firmware to get yourself up and running then if you want Ufirmware go ahead flash that
AndrOmega said:
Try Smart Switch. It will automatically download the correct firmware for you.
Click to expand...
Click to collapse
Thanks, I've tried Smart switch, but it doesn't work, fortunately, it's resolved by flashing the latest G935U firmware
gurnsey101 said:
Hmmmmm what update were you trying to flash in odin and i would check the back of your phone bc it should say exactly what model it is (935x) just to be sure then flash the LASTEST firmware to get yourself up and running then if you want Ufirmware go ahead flash that
Click to expand...
Click to collapse
You're right bro, it was resolved by flashing the latest firmware of G935U, thanks a lot
No problem glad I could help
I have the samsung galaxy S8 and ive tried flashing back to stock rom so many times over the summer with no luck. everything is just causing an error in odin
My build number is G95OUSQU5CRF1 can someone please send me a link for the firmware for this device. the carrier is AT&T
OfficialPyroh said:
I have the samsung galaxy S8 and ive tried flashing back to stock rom so many times over the summer with no luck. everything is just causing an error in odin
My build number is G95OUSQU5CRF1 can someone please send me a link for the firmware for this device. the carrier is AT&T
Click to expand...
Click to collapse
Sammobile.com or updato.com will have them
OfficialPyroh said:
I have the samsung galaxy S8 and ive tried flashing back to stock rom so many times over the summer with no luck. everything is just causing an error in odin
My build number is G95OUSQU5CRF1 can someone please send me a link for the firmware for this device. the carrier is AT&T
Click to expand...
Click to collapse
Hey . If you have twrp Then flash A custom rom like Renovation Ice smg950f .Its great. If you dont have custom recovery then open sammobile.com or samobile.com and search your stock firmware and then flash it usding odin and use original cable .
Hi, I've been looking for the firmware for many hours but I can't even download the Samsung Note 4 N910F firmware. Samfirm no longer works, on other hosts I download a damaged file.
I currently have ROM Resurrection installed, but I have to go back to stock, can I do it with ODIN? where can I download the firmware for N910F ITALIA NO BRAND?
can you install the stock rom also with twrp?
Thanks!
mercurio32 said:
Hi, I've been looking for the firmware for many hours but I can't even download the Samsung Note 4 N910F firmware. Samfirm no longer works, on other hosts I download a damaged file.
I currently have ROM Resurrection installed, but I have to go back to stock, can I do it with ODIN? where can I download the firmware for N910F ITALIA NO BRAND?
can you install the stock rom also with twrp?
Thanks!
Click to expand...
Click to collapse
Flash by odin
Do factory reset from stock recovery after flash
https://www.sammobile.com/samsung/galaxy-note-4/firmware/SM-N910F/ITV/download/N910FXXU1DRI2/256089/
From twrp you can only flash custom roms not stock firmware.
Trex888 said:
Flash by odin
Do factory reset from stock recovery after flash
https://www.sammobile.com/samsung/galaxy-note-4/firmware/SM-N910F/ITV/download/N910FXXU1DRI2/256089/
From twrp you can only flash custom roms not stock firmware.
Click to expand...
Click to collapse
I have issues aswell. When the setup screen should come, all kinds of services stop working (f.e. "Surface/UI stopped working")
What I tried (N910F Germany, originally T-Mobile Branding but unlocked):
- Flash Stock Rom via Odin (tried both Vanilla and T-Mobile version): https://www.sammobile.com/samsung/galaxy-note-4/firmware/SM-N910F/DBT/
- Rom + PIT: https://forum.xda-developers.com/no...te-4-pit-files-repartiton-f-g-c-t-w8-t3282641
- Rom + PIT + BL + Modem: https://androidfilehost.com/?w=files&flid=41392
Would need a tutorial for a clean install if Kernels or other stuff were modified like in the Ketan Rom.
EDIT: I got it to work, with the files from this thread https://forum.xda-developers.com/note-4/snapdragon-dev/note-4-debrick-img-t3488114
Flashed everything with odin from this folder (except boot_recovery_v2.pit) https://mega.nz/#F!QIMmFRIT!Ns3AM-n0FUoMqOOWUif9ng!YN9lgLRI
I originally had a T-Mobile Brand, now its Vodafone Brand. You might try swapping the Firmware with a brandless one for Italy from Sammobile, might work and if not I don't think you crash anything with it (the files are for 5.1.1, so take a 5.1.1. Firmware and update).
nr-thunder said:
I have issues aswell. When the setup screen should come, all kinds of services stop working (f.e. "Surface/UI stopped working")
What I tried (N910F Germany, originally T-Mobile Branding but unlocked):
- Flash Stock Rom via Odin (tried both Vanilla and T-Mobile version): https://www.sammobile.com/samsung/galaxy-note-4/firmware/SM-N910F/DBT/
- Rom + PIT: https://forum.xda-developers.com/no...te-4-pit-files-repartiton-f-g-c-t-w8-t3282641
- Rom + PIT + BL + Modem: https://androidfilehost.com/?w=files&flid=41392
Would need a tutorial for a clean install if Kernels or other stuff were modified like in the Ketan Rom.
EDIT: I got it to work, with the files from this thread https://forum.xda-developers.com/note-4/snapdragon-dev/note-4-debrick-img-t3488114
Flashed everything with odin from this folder (except boot_recovery_v2.pit) https://mega.nz/#F!QIMmFRIT!Ns3AM-n0FUoMqOOWUif9ng!YN9lgLRI
I originally had a T-Mobile Brand, now its Vodafone Brand. You might try swapping the Firmware with a brandless one for Italy from Sammobile, might work and if not I don't think you crash anything with it (the files are for 5.1.1, so take a 5.1.1. Firmware and update).
Click to expand...
Click to collapse
Thank you all, luckily I found the firmware archive file I had saved and flashed everything with odin. It worked well. Thanks again
Hi guys,
How can I revert to stock 5.0 after Resurrection ROM installed on this phone?
I think I have installed TWRP Recovery too,something like that name.
A link with step by step instructions would be great.
Thanks.
Yes of course you can flash stock through Odin .
TWRP wipe data /then boot to download mode and flash stock rom through Odin .
JJEgan said:
Yes of course you can flash stock through Odin .
TWRP wipe data /then boot to download mode and flash stock rom through Odin .
Click to expand...
Click to collapse
How to do that what you wrote,any tutorial?
I can't find stock for my country on samsmobile (Bosnia) can I go with Croatia,or Serbia?
TUTS on sammobile and all over this forum .
at least 3 Bosnia products for N9005 show on sammobile
JJEgan said:
TUTS on sammobile and all over this forum .
at least 3 Bosnia products for N9005 show on sammobile
Click to expand...
Click to collapse
https://www.sammobile.com/samsung/galaxy-note-3/firmware/#SM-N9005
Yep found them,but those are only for premium users...this sucks!!
samsung-updates updato .com and others .
Though they may also charge to host firmware for your conveniance .