Related
I was running cloudy g3 rom and then i installed a Kernel. O reboot my phone and only says fastboot mode started and udc(0) i need atleast to save photos . I cant access recovery , help please
@wazowpt can you still enter downloadmode?
I heard from someone that that fastboot is because the kernel isnt good. Can you check or fastboot rly works? Then you could maybe fix recovery
wulsic said:
@wazowpt can you still enter downloadmode?
I heard from someone that that fastboot is because the kernel isnt good. Can you check or fastboot rly works? Then you could maybe fix recovery
Click to expand...
Click to collapse
How can i check those things? Help
wazowpt said:
How can i check those things? Help
Click to expand...
Click to collapse
Sorry for late response i was answering an pm First follow that download mode thing, I will later post the fastboot way if download mode doesn't work for your own safety cause fastboot is also dangerous :good: If you can't enter download mode at once, Try it several times.
Download the LG usb drivers if you haven't done that yet,
Since you probably aren't gonna use the android SDK but only to use fastboot/adb download this:
http://forum.xda-developers.com/showthread.php?t=2588979
To enter download mode:
How to Enter Download Mode on LG G2 (STEP BY STEP GUIDE).
1.Turn off the smartphone before beginning the step by step guide. For making this press power button from your device and then select “power off”.
2.Now, press the volume up on the device.
3.While the volume up button is holding, take the USB cable and plug in the device.
4.Now, keep the Volume up button pressed until the Download Mode is being to be displayed.
If it shows download mode read through this guide and then you can fix it without fastboot:laugh: also read through the other steps while doing it.
If you already had installed the LG usb drivers then you can skip step5
http://forum.xda-developers.com/showthread.php?t=2432476
5.Now, the device will start to install some drivers, and for this action it will take around 10 minutes to complete. So, you need only to wait and to let the device to install the suitable drivers.
6.Important, when you’ll update the LG G2 device by using the Download Mode, do not remove the USB cord while the installation process is in progress as you can end up the process by bricking the device.
7.Next, you can return to the LG G2 Android OS by pressing the power button.
8.Keep pressing the power button until the LG logo will be displayed.
9.Now, you can safety disconnect the USB cable.
So i can solve this problem this simple.? I thought I was gonna have to send it to repair. Thanks I will try this later when I'm on pc. Will post updates
wulsic said:
Sorry for late response i was answering an pm First follow that download mode thing, I will later post the fastboot way if download mode doesn't work for your own safety cause fastboot is also dangerous :good: If you can't enter download mode at once, Try it several times.
Download the LG usb drivers if you haven't done that yet,
Since you probably aren't gonna use the android SDK but only to use fastboot/adb download this:
http://forum.xda-developers.com/showthread.php?t=2588979
To enter download mode:
How to Enter Download Mode on LG G2 (STEP BY STEP GUIDE).
1.Turn off the smartphone before beginning the step by step guide. For making this press power button from your device and then select “power off”.
2.Now, press the volume up on the device.
3.While the volume up button is holding, take the USB cable and plug in the device.
4.Now, keep the Volume up button pressed until the Download Mode is being to be displayed.
If it shows download mode read through this guide and then you can fix it without fastboot:laugh: also read through the other steps while doing it.
If you already had installed the LG usb drivers then you can skip step5
http://forum.xda-developers.com/showthread.php?t=2432476
5.Now, the device will start to install some drivers, and for this action it will take around 10 minutes to complete. So, you need only to wait and to let the device to install the suitable drivers.
6.Important, when you’ll update the LG G2 device by using the Download Mode, do not remove the USB cord while the installation process is in progress as you can end up the process by bricking the device.
7.Next, you can return to the LG G2 Android OS by pressing the power button.
8.Keep pressing the power button until the LG logo will be displayed.
9.Now, you can safety disconnect the USB cable.
Click to expand...
Click to collapse
I flash it trough flashtool and i installed a new rom and its fully working now , thanks, i also managed to save the photos because some google service backup all the photos and videos i had in this phone
@wazowpt thats sounds good have fun with your g2 ?
um.... i am trying to use the MiFlash and it went into some error and now my phone has nothing (no recover, no roms) and can't get into the download mode if i hold the vol + and vol - and power button (keep rebooting)
when i connect to MiFlash program it didn't show my device too
I can't turn off my phone and stuck at "MI" logo
can someone help me out please and let me know what to do?
thanks
I finally solve the problem but i am getting the following when i try to flash the china dev rom
"not enough storage is available to process this command..."
what should i do?
I am currently flashed the SpaceX one but couldn't unlock my bootloader when I hit 50%, i have the unlock permission from xiaomi
wait, wait, wait...
First, you try to flash china dev or spacex?
And to enter download mode, press power and volume +
the only way i find to flash new rom with locked bootloader is to use miflash BETA
P.S. : If you have the mi logo at boot you can go to download mode
um......thanks it work flashing the china dev rom to my phone using the beta but......
actually it won't let me go into the download mode cuz the recovery is gone and when i press vol + and vol- and power together it won't go into the download mode too
so i dig up the internet and found that you can go into fastboot mode and type "fastboot oem edl" in the cmd and it work some how
um... i have the permission to unlock my phone but how come when i do the unlock it can't go pass 50 percent and asked me to try again? is there something wrong?
Ah i see what happen, I have to login my phone with mi account first and unlock the bootloader
Thanks the miflash beta it's very helpful
Solve my problem
Hello, as the title says I have a full brick, I have tried to testpoint without results, when connecting to the pc install drivers and disconnected after 3 seconds, lgup does not recognize the model, the problem was when installing a custom rom that said the web that was for my cell phone lg k8, I lost the guarantee, what can I do ?.
I've tried everything already and on google I find nothing. Thank you.
I have already researched a bit and the boot.img is the kernel is what I installed, is there no economic way to repair the kernel? a software?
tattoosmistery said:
I have already researched a bit and the boot.img is the kernel is what I installed, is there no economic way to repair the kernel? a software?
Click to expand...
Click to collapse
Well when you install/flash wrong kernel things can get very ugly, or it can refuse to flash in your case it seems like a hard bricked. Did you tried guides for unbricking from this and K10’s forum? Can you access fastboot?
I've been 10 days
Professor Woland said:
Well when you install/flash wrong kernel things can get very ugly, or it can refuse to flash in your case it seems like a hard bricked. Did you tried guides for unbricking from this and K10’s forum? Can you access fastboot?
Click to expand...
Click to collapse
I've been 10 days and all day, I read all the tutorials but all say that I enter fastboot or download mode my cell phone k8 does not react to enter those modes I have tried everything and by software is impossible at least for me , voya try to create a jib usb with 990k resistors that I saw a video on YouTube that explained how to do it if it does not work I will try to talk to a friend who has the octopus to see if it can be fixed since it has support for my model, thanks and Anything that can help me to repair it would be very grateful.
tattoosmistery said:
I've been 10 days and all day, I read all the tutorials but all say that I enter fastboot or download mode my cell phone k8 does not react to enter those modes I have tried everything and by software is impossible at least for me , voya try to create a jib usb with 990k resistors that I saw a video on YouTube that explained how to do it if it does not work I will try to talk to a friend who has the octopus to see if it can be fixed since it has support for my model, thanks and Anything that can help me to repair it would be very grateful.
Click to expand...
Click to collapse
I'm not sure what are talking about here. However can you enter fastboot, how do you mean phone doesn't react?
Professor Woland said:
I'm not sure what are talking about here. However can you enter fastboot, how do you mean phone doesn't react?
Click to expand...
Click to collapse
The mobile does not go in any way with any combination of possible keys, I do not know where the testpoint is, it does not go into the download mode and it does not even leave the logo of lg.
Sorry for my english I use the google translator.
tattoosmistery said:
The mobile does not go in any way with any combination of possible keys, I do not know where the testpoint is, it does not go into the download mode and it does not even leave the logo of lg.
Sorry for my english I use the google translator.
Click to expand...
Click to collapse
So the LG logo appears?
We'll try this :
Press the power key until it gives you vibrate or any sign that phone is going to power on, the press and hold volume down it should give you all black screen with text on bottom saying fastboot mode. If it doesn't try all this but with volume up instead of volume down. I'm not even sure how to enter fastboot since I usually do it from ADB.
Professor Woland said:
So the LG logo appears?
We'll try this :
Press the power key until it gives you vibrate or any sign that phone is going to power on, the press and hold volume down it should give you all black screen with text on bottom saying fastboot mode. If it doesn't try all this but with volume up instead of volume down. I'm not even sure how to enter fastboot since I usually do it from ADB.
Click to expand...
Click to collapse
I already tried all the key combinations and it does not react.Thanks
tattoosmistery said:
I already tried all the key combinations and it does not react.Thanks
Click to expand...
Click to collapse
Well if it's not recognized in any way when turning on then it's hard brick sorry
Is there no program to launch it fastboot directly?
Mine was bricked.
My solution was to enter in download mode, because other modes just rebooted the phone.
So follow this, and luck:
1-you need a PC turned on and the USB cable plugged already
2-quit the battery of the phone
3-now the phone is obviously off, you have to put the battery in WHILE holding volumen up button and then plug the USB still holding that button
It will enter download mode.
If step 3 doesn't work, try the same but with power button held too, with volume up.
Follow this then:
https://www.mylgphones.com/how-to-unbrick-lg-k8-k350-phone-with-lg-up.html
carwave said:
Mine was bricked.
My solution was to enter in download mode, because other modes just rebooted the phone.
So follow this, and luck:
1-you need a PC turned on and the USB cable plugged already
2-quit the battery of the phone
3-now the phone is obviously off, you have to put the battery in WHILE holding volumen up button and then plug the USB still holding that button
It will enter download mode.
If step 3 doesn't work, try the same but with power button held too, with volume up.
Follow this then:
https://www.mylgphones.com/how-to-unbrick-lg-k8-k350-phone-with-lg-up.html
Click to expand...
Click to collapse
It does not Word.
Hi, I'm using Nokia 6 ( TA 1000) mobile with Playstore ( i purchased it local mobile shop and they said it's with Play-store. but i haven't received any update from 2017- April security update.
so i found some ways to manual update (https://forum.xda-developers.com/nokia-6/how-to/nokia-6-official-firmware-mena-region-t3664441) and i followed some steps form Xda forum. finally i got oreo update, but my mobile model change to TA-2025 and sounds/camera quality dropped. ( sound looks like mono speaker)
then i tired to go back to old model using OSTLA_v6.1.2.zip
but unfortunately mobile goes to download mode and now it's not turn on or turn off. (display on until battey low )
"Powered by android - download mode" test only in background
Is there a way to fix this issue ? i didn't found any place to fix i
U must flash desember OTA update firstly
Cek this https://forum.xda-developers.com/nokia-6/how-to/nokia-6-ta-1000-homebrew-stock-android-t3752006
After stuck on recovery u can flash original firmware nougat with OST LA 6.0.4
hawwin88 said:
U must flash desember OTA update firstly
Cek this https://forum.xda-developers.com/nokia-6/how-to/nokia-6-ta-1000-homebrew-stock-android-t3752006
After stuck on recovery u can flash original firmware nougat with OST LA 6.0.4
Click to expand...
Click to collapse
but phone is stuck in the download mode. is there a way to get back to recovery mode ?
Press power switch long?
Mikelsson70 said:
Press power switch long?
Click to expand...
Click to collapse
restarting & once again download mood
Try
- power off phone
- put phone in charger (wait about 10 seconds)
- Press vol+ and power buttons about 10-12s
(now appear death of android)
- Press power button down and then click vol+ once and then don't press any button
swipe cache or flash
try again if not go recovery
if after couple try, recovery still missing. You must flash it.
Mikelsson70 said:
Try
- power off phone
- put phone in charger (wait about 10 seconds)
- Press vol+ and power buttons about 10-12s
(now appear death of android)
- Press power button down and then click vol+ once and then don't press any button
swipe cache or flash
try again if not go recovery
if after couple try, recovery still missing. You must flash it.
Click to expand...
Click to collapse
When i connect charger, then it's automatically power ON and goes to download mood.
so i tired power off phone in charger, but then it's always restart only ( goes to download mood)
Mikelsson70 said:
Try
- power off phone
- put phone in charger (wait about 10 seconds)
- Press vol+ and power buttons about 10-12s
(now appear death of android)
- Press power button down and then click vol+ once and then don't press any button
swipe cache or flash
try again if not go recovery
if after couple try, recovery still missing. You must flash it.
Click to expand...
Click to collapse
is there a way to use any online tool to flash it ?
press and hold three buttons (vol up, down & power) at the same time
maybe you will out from download mode
hawwin88 said:
press and hold three buttons (vol up, down & power) at the same time
maybe you will out from download mode
Click to expand...
Click to collapse
yes, it's work for power off ( display "shout down" in the top left side for the 1st time), but when i plug charger, once again it's goes to download mode.
emmazz said:
When i connect charger, then it's automatically power ON and goes to download mood.
so i tired power off phone in charger, but then it's always restart only ( goes to download mood)
Click to expand...
Click to collapse
edit: It seems OST tool won't work. If we are on 8.1
Try use OST LA and flash stock firmware again. Sorry i never used it, so i can't help more.
If you need EDL cable, but it is ordinary usb cable. Only 2 wires put together when flash.
You go always download mode, so i think you not need.
http://forum.gsmhosting.com/vbb/f805/edl-cable-answered-2192111/
try 1st
https://forum.xda-developers.com/no...ia-8-official-firmware-links-updated-t3678487
( note nokia 8 forum)
or it not working try
try 2nd
https://forum.xda-developers.com/showpost.php?p=75131201&postcount=4
I hope some more things know can help you.
These methods are almost emergency use only.
Mikelsson70 said:
edit: It seems OST tool won't work. If we are on 8.1
Try use OST LA and flash stock firmware again. Sorry i never used it, so i can't help more.
If you need EDL cable, but it is ordinary usb cable. Only 2 wires put together when flash.
You go always download mode, so i think you not need.
http://forum.gsmhosting.com/vbb/f805/edl-cable-answered-2192111/
try 1st
https://forum.xda-developers.com/no...ia-8-official-firmware-links-updated-t3678487
( note nokia 8 forum)
or it not working try
try 2nd
https://forum.xda-developers.com/showpost.php?p=75131201&postcount=4
I hope some more things know can help you.
These methods are almost emergency use only.
Click to expand...
Click to collapse
Thank you so much, i'll try :crying:
emmazz said:
yes, it's work for power off ( display "shout down" in the top left side for the 1st time), but when i plug charger, once again it's goes to download mode.
Click to expand...
Click to collapse
If still goes to download mode, maybe u can try this
Connect ur phone with computer
And open command in OST LA folder
Type this =
fastboot continue
and press enter
hawwin88 said:
If still goes to download mode, maybe u can try this
Connect ur phone with computer
And open command in OST LA folder
Type this =
fastboot continue
and press enter
Click to expand...
Click to collapse
mobile restarting and getting "usb detect" sound in PC continues. it's not stop until unplug
Hey guys, Nokia 6 mobile handover to the small repair shop in the town and, now Mobile is working fine, with the TA-1021 and i have updated to Android 9. (may 1, 2019 Security update.)
but now sounds are very loud and it's very annoying. i don't know what happened. but sound quality dropped to very low. and also Mobile camara quality also like VGA camara.
is there a way to fix this issue ? or restore to the original TA-1000 version. :crying: :crying: :crying:
if you have unlocked bootloader, it much easier just download NOST by hikary, and some stock nougat rom.
just flash and it work again.
My ta-1021 have this couple month ago, stuck on download after downgrade from nougat to oreo.
frnsl3 said:
if you have unlocked bootloader, it much easier just download NOST by hikary, and some stock nougat rom.
just flash and it work again.
My ta-1021 have this couple month ago, stuck on download after downgrade from nougat to oreo.
Click to expand...
Click to collapse
is there a way to check "bootloader unlock" ?
emmazz said:
is there a way to check "bootloader unlock" ?
Click to expand...
Click to collapse
in stock all phone will ship with locked bootloader.
to check just reboot your phone, in "powered by android" display there is a message or not.
if not your phone has locked bootloader.
frnsl3 said:
in stock all phone will ship with locked bootloader.
to check just reboot your phone, in "powered by android" display there is a message or not.
if not your phone has locked bootloader.
Click to expand...
Click to collapse
hmm. only powered by android logo, and then nokia Logo.
is there any tutorials to unclock this bootloader ? my mobile is Nokia 6, TA 1000 ( but current firmware is TA-1021 - android 9 latest update) i want to go back to TA- 1000 or TA 1003 (happy to use android 9 with ta 1000 or ta 1003)
This is the edl firmware of Nubia RedMagic 5S, which can repair your phone in edl mode.
This firmware was made by North America & Asia: V807. All the files are from the official package without any modification!
How to do?
1.Open XiaoMiFlash.exe in the MiFlash folder
2.Click the select button to select the images in this firmware
3.The phone enters edl mode and connects to the computer with a usb cable
(If your phone is in edl mode (9008 mode) for a long time, you must long press the
power button volume + and volume-keys to force the phone to power off, and then re-enter edl mode)
4.Click Loading and see the COMxx that appears, indicating that your phone is connected. Then click Flash
5.Then just wait, prompting flash done!sucess! It means that the flashing has been completed,
long press the power button to restart the phone!
When you see the green notification light next to the front camera light up,
you can release the power button.
Good luck!Enjoy it!!!
Download link:https://mega.nz/file/rEc2kIDC#FExxIiuqTcMPpn0Ji_pAtVqH4CBiSWvJPUkDYjR-4cc
Much appreciated for your time dude. I tried to build one also with help, but I'm not savvy enough.
Can we use it with Red magic 5s eu version?
Do you have for eu rom?
johnny886 said:
This is the edl firmware of Nubia RedMagic 5S, which can repair your phone in edl mode.
This firmware was made by North America & Asia: V807. All the files are from the official package without any modification!
How to do?
1.Open XiaoMiFlash.exe in the MiFlash folder
2.Click the select button to select the images in this firmware
3.The phone enters edl mode and connects to the computer with a usb cable
(If your phone is in edl mode (9008 mode) for a long time, you must long press the
power button volume + and volume-keys to force the phone to power off, and then re-enter edl mode)
4.Click Loading and see the COMxx that appears, indicating that your phone is connected. Then click Flash
5.Then just wait, prompting flash done!sucess! It means that the flashing has been completed,
long press the power button to restart the phone!
When you see the green notification light next to the front camera light up,
you can release the power button.
Good luck!Enjoy it!!!
Download link:https://mega.nz/file/rEc2kIDC#FExxIiuqTcMPpn0Ji_pAtVqH4CBiSWvJPUkDYjR-4cc
Click to expand...
Click to collapse
why
omar.A.Jasim said:
why
Click to expand...
Click to collapse
ignore that error, make sure your device is on edl mode, click refresh and you should see the device, then click on flash
Please HELP!!!
Everything it flash a .img it disconnect and reconnect my phone and this happen,
"ACK count don't match!"
Due to lots of bugs on Andoid 11, I used this guide to downgrade to android 10 with the help and guidance of RM5 telegram community. Im on EU before so there will be no issue if you use this.
after flashing it is taking long time to boot ( feels stuck )
zaid_arsenal said:
after flashing it is taking long time to boot ( feels stuck )
Click to expand...
Click to collapse
by mistake I made the storage type ext4 and when I changed it to f2fs it worked.
thank you very much you saved my phone <3
Salor123 said:
Please HELP!!!
Everything it flash a .img it disconnect and reconnect my phone and this happen,
"ACK count don't match!"
View attachment 5283429
Click to expand...
Click to collapse
I have a problem like this, is there a fix for it?
Hi,
Im following this.. but i keep on receiving error msg such as.
Cannot received hello packet.