Database Users

[general][Q&A][Discussions] cyanogenmod 12

Hello folks at xda
i think it's better to ask our questions that are not helping developers to make stable cm12 here,and not post spams on dev thread.
i just want to say : leave developer threads for developers.:good:
ask general questions here.so devs can focus on important things.
Download rom from this mirror link if you can't download it from mega
Also you can try Resurrection remix [Lollipop 5.0.2] [Credit : @Furrydaus]
[*]USB Charging : Ok
[*]USB ADB : Ok
[*]USB MTP : Ok
[*]Video : Ok
[*]Audio : Ok
[*]Sensors : Ok
[*]Screen rotation : Ok
[*]WLAN : Ok
[*]Wifi hotspot : seems to be working ( Fix! [credit : @MrSteve555] )
[*]GPS : Ok
[*]GSM : Ok
[*]GSM Data : (Fix! [credit : @Sylvester lobo] || or this => A comprehensive Mobile Data fix)
[*]GSM Voice : Ok ( Fix! [credit : @MrSteve555] )
[*]GSM SMS : OK
[*]Bluetooth : Ok
[*]NFC : Ok
[*]Camera : Ok
[*]FM Radio : Not work
[*]Keyboard : Ok
[*]MHL : Not tested
[*]OTG : Ok ( this post )
[*]VPN : Doesn't work
[*]...

How to install cm12 (mrsteve) on sp . by @[SIZE="5"]Dammer Martins[/SIZE]
Small tutorial for instalation of the steves build with working camera and wifi:
1-Download the ROM , ramdix fix, stock kernel and root fix
2-Open the ROM zip an push the ramdisk fiz in to system/bin folder
3-Now, put the ROM zip fixed, stock kernel and the root fix in your sdcard
4-Reboot in recovery, wipe data, cache and dalvik cache
5-Install the ROM, the stock kernel and then the root fix
6-Now reboot the system and wait the phone boot up (this take a veeery long time, trust me )
Tips: don't flash the gapps with the ROM instalation and disable the adaptive brightness to make the auto reboots stop.
Click to expand...
Click to collapse

Fix hot reboots by turning off adaptive brightness(settings->display->adaptive brightness)
Fix connectivity problem on CM12.by @noahvt
Hello,
Finally a fix has arrived for android 5.0 which will allow wi-fi data, outgoing calls, ... to work again
Steps:
1: Make sure your device is running android 5.0 by mrsteve555: http://forum.xda-developers.com/xper...8#post56946968
2: root the device by flashing this file: http://download.chainfire.eu/589/Sup...erSU-v2.16.zip
3: Reboot your device and open up terminal emulator
4: type su, press enter and give it root acces
5: type setenforce 0 and press enter
6: WAIT untill the device asks you to enter your sim pin (this means that it worked)
7: turn on wi-fi (it might take a little long to turn on wi-fi though)
8: that's it
9: well not yet there is one step you can do to make it easier to change the selinux state, Download and install this app:https://play.google.com/store/apps/d....selinux&hl=en
10: again make sure your device is rooted
11: open the app and now you can switch between permissive (this mode is the one that fixed the issues) and enforcing (default mode: wi-fi, ... don't work on this mode)
FAQ:
What is not affected (what doesn't work): The camera (can't connect to camera or hot reboot when launching camera app), more?
What is affected (what is fixed): WI-FI, Data (LTE too) Outgoing calls, more?
Do i have to do this everytime i boot my device: Yes for now you do
On what build does it run: mrsteve555's build, there were 2 reports of it not working on bagy's build
Credits:
Mrsteve555 and bagyusz for the amazing rom
Click to expand...
Click to collapse
just update titanium backup to latest version in case of super user access error.like this : can't aquire root provileges....this attemtp was made using the "/system/xbin/su" command.
Fix wifi hotspot => credit : MrSteve555
setup zram in android 5[credit : Mrsteve555]
Code:
#!/system/bin/sh
sleep 30
echo xM > /sys/block/zram0/disksize
mkswap /dev/block/zram0
swapon /dev/block/zram0
Replace x with your desired value(in MB)
And zram doesn't make phone "much faster", it just allows more multitasking while slowing the phone a bit.
Click to expand...
Click to collapse
fix sdcard mount problem [credit : Mrsteve555]
Code:
su
depmod
rmmod texfat
modprobe exfat_core
modprobe exfat_fs
These commands will try to load different exfat modules, I didn't test it myself, though.
Click to expand...
Click to collapse
Fix for unresponsive touch screen[credit : Mrsteve555]
Code:
#!/system/bin/sh
echo 20 > /sys/devices/i2c-3/3-0024/main_ttsp_core.cyttsp4_i2c_adapter/finger_threshold
chmod 666 /sys/devices/i2c-3/3-0024/main_ttsp_core.cyttsp4_i2c_adapter/signal_disparity
echo 0 > /sys/devices/i2c-3/3-0024/main_ttsp_core.cyttsp4_i2c_adapter/signal_disparity
Fix for music file not playing when you uncheck nuplayer in developer options
The solution to that will be installing viper audio. There is a different version for lollipop. You have to flash 3 zips. They need nuplayer off so you can play music and videos easily with nuplayer off
Click to expand...
Click to collapse
Download from this post [Thanks@pranavthombare]

r 3

and-roid007 said:
Fix hot reboots by turning off adaptive brightness(settings->display->adaptive brightness)
Fix connectivity problem on CM12.by @noahvt
Click to expand...
Click to collapse
Really thks ;D

Youve stated that GSM voice hasnt been tested - This is voice calls. Are they working on MrSteves build with the latest fixes or not as there seems to be mixed reports.
---------- Post added at 02:54 PM ---------- Previous post was at 02:52 PM ----------
Also your link to the https://play.google.com/store/apps/d....selinux&hl=en doesnt work
I assume its this app? https://play.google.com/store/apps/details?id=com.mrbimc.selinux&hl=en_GB

and-roid007 said:
Fix hot reboots by turning off adaptive brightness(settings->display->adaptive brightness)
Fix connectivity problem on CM12.by @noahvt
Click to expand...
Click to collapse
The fix isn't working for me

@Oblox
you are right about both.corrected

Sorry the pin code doesn't apear because i don't have set any pin code ... IM REALLYYYYYYY NOOOOOB! xD
Edit: But i can't send call, i recieve

bobslesbricoleurs said:
Sorry the pin code doesn't apear because i don't have set any pin code ... IM REALLYYYYYYY NOOOOOB! xD
Edit: But i can't send call, i recieve
Click to expand...
Click to collapse
just open terminal : type su-> type setenforce 0,hit enter.if no dialog appears dont worry,it's ok.
go to settings-> about phone-> make sure that SELinux status = premissive.
see the bug list :
GSM Voice : doesn't works (Only can recieve calls)
Click to expand...
Click to collapse

and-roid007 said:
How to install cm12 (mrsteve) on sp . by @Dammer Martins
Click to expand...
Click to collapse
What's the problem if I flash GApps with the ROM?

sohan3421 said:
What's the problem if I flash GApps with the ROM?
Click to expand...
Click to collapse
The problem will occur if you do this on first flash as itll take a lot longer to boot and the auto brightness forced reboot will kick in before it finishes. Once system is in and auto brightness disabled then install gapps.

No new about calls?
Sent from my Xperia SP using XDA Premium 4 mobile app

Navigation bar and Pie controls
I know when I moved from 4.4 to 5.0 most things that I could get from xposed or custom roms were gone such as pie controls. I've been looking around for ages and I've managed to remove navigation bar using build.prop and adding a highly customizable pie controls app. If anyone wants a tutorial made to hide navigation bar and get pie controls just ask and ill do it

Pie
Keep Pie In Memory​
1. Search root explorer in Google play 3rd one down.
2. Open it and press mount R/W ( top of app)
3. Go into root directory and open the folder data.
4. Create new file and name it local.prop
5. Long hold the newly created app and press open in text editor.
6. Add com.android.lmt
This is to prevent android removing the service from memory when it is low.
Remove Navigation Bar​
1. Open build.prop located on /system
2. Add qemu.hw .mainkeys = 1 Remember to add a space between either side of the equals or it won't work
3.Do not reboot until you have downloaded LMT launcher
Add Pie Controls​
LMT Launcher ( PIe Controls (Not an actual launcher like nova or apex its just called that) )
1. Download the latest apk from here http://forum.xda-developers.com/showthread.php?t=1330150
2. Open the app make sure autostart is selected
3. Swipe right until you get to Pie.
4.Use these settings ( navigate to the screenshots) it will get rid of the unneeded two extra slots of pie controls
Finally Reboot
If you have titanium backup convert lmt launcher into a system app to integrate the pie controls more into the system

and-roid007 said:
How to install cm12 (mrsteve) on sp . by @[SIZE="5"]Dammer Martins[/SIZE]
Click to expand...
Click to collapse
Why should I add ramdisk fix?

sohan3421 said:
Why should I add ramdisk fix?
Click to expand...
Click to collapse
Why not?
Because the ramdisk inside the zip is either corrupt or incomplete, resulting in bootloop if flashed.

sohan3421 said:
Why should I add ramdisk fix?
Click to expand...
Click to collapse
Coz it'll go in a bootloop if you don't and then clog this thread too, by begging for a link and a guide which was clearly given and posted by many users.

gapps working fine?

shahrukhqasim said:
gapps working fine?
Click to expand...
Click to collapse
yes.i think

LG G4 v29a magisk + safetynet pass + debloat + adaway - Howto guide

Hey guys.
I am using magisk 15.3 to debloat the v29a system systemlessly.
Systemless Debloat with the magisk module (terminal debloater) means that the system partition isn't touched!
Hence, it don't breaks safetynet (also with the help of Universal safetynet fix beta 5).
Requirements:
BL unlocked
TWRP installed, up and running
Here is a short how to guide:
When you already on v29a and you have modify the system partition (adaway, supersu, TiBu,...) just flash the stock v29a system partition again and don't touch it (no supersu, no adaway,...)!
Here is the link: https://forum.xda-developers.com/g4/development/h815-nougat-stock-t3659860
Flash magisk 15.3 in TWRP and boot up.
Here is the Link: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Go into magisk manager and check safetynet status. In my case cts profile fails. No problem...
Go into twrp and flash the universal safetynet beta 5 fix. DONT USE the stable, use the BETA!
Here is the link: https://forum.xda-developers.com/apps/magisk/xiaomi-safetynet-fix-t3600431
Restart phone and check safetynet status. It should pass booth checks.
Now you are rooted and pass safetynet. You can install and use Netflix, Super Mario Run, banking apps... victory
To get adaway working and not breaking safetynet, open it, go to settings and set the hosts file location to /data/. Press update/install hosts file. Adaway will ask you to create a symlink on system. Do it, this will not break safetynet!
From magisk manager you can install "terminal debloater" and use my list to Debloat the rom without breaking safetynet.
Here is the List:
1 - Google Play Books
2 - DRM Service
3 - Docs
4 - Sheets
5 - Slides
6 - GNSS Air Test
7 - gnsslogcat
8 - LG GNSS 2.1
9 - GnssTest 1.2
10 - Google Text-to-speech Engine
11 - HTML Viewer
12 - Hangouts
13 - Hidden Menu
14 - HiddenSIMUnlockMenu
15 - LG Account
16 - LGAirDrive
17 - LG Backup Launcher
18 - LGDrm
19 - FOTA Update
20 - Audio share
21 - LGSmartcardService
22 - Smart cleaning
23 - LGWernickeManager
24 - LteConfigs
25 - Google Play Newsstand
26 - PacProcessor
27 - Google Play Games
28 - Google+
29 - Print Spooler
30 - Use DLNA feature
31 - SmartShareProvider
32 - Google Play Movies
33 - Wfd Service
34 - atfwd
35 - ELTest
36 - ServiceMenu
37 - TalkBack
38 - BackupRestoreConfirmation
39 - LG Health Agent
40 - Cloud
41 - Battery drain info
42 - GCUV
43 - Game battery saver
44 - IceContacts
45 - InCalAgent
46 - LG AirDrive
47 - Clock
48 - App Updates
49 - LG Mobile Switch
50 - Internet
51 - Calculator
52 - Calendar
53 - Cell Broadcast
54 - Smart Notice
55 - Contacts
56 - LGSmartCover
57 - Software update
58 - Email
59 - Exchange
60 - File Manager
61 - FormManager
62 - Answer me
63 - LGInstallService
64 - LDB
65 - LGMapUI
66 - Messaging
67 - Music
68 - Music
69 - LG P2p Service
70 - LG Bridge Service
71 - LGPartnerBookmarksProvider
72 - LG RCS Services
73 - RcsCall
74 - SharedSketch
75 - SnapPage
76 - Tasks storage
77 - Update Center
78 - Voice Recorder
79 - LG WFDS Services
80 - LIA Informant
81 - LIA S4URecommender
82 - LG Connectivity Service
83 - My Places Engine
84 - My Place
85 - RCSProvider
86 - SmartSetting
87 - Tags
88 - qcrilmsgtunnel
Click to expand...
Click to collapse
Now you are rooted, have adaway, pass safetynet & debloated all the LG s*** out of this rom.
Go to the magisk manager download section and find other great systemless mods
THX goes to:
@twrp team and @steadfasterX for TWRWP
@kessaras for v29a flashable zip
@Deic for universal safetynet fix beta 5
All the others I forgot.
pOpY

What does the author of this thread mean by "systemless debloat"?
Isn't just disabling/freezing apps enough?
Also, how can you pass safetyNet? I cannot pass it even with safetyNet Universal fix...

Reserved

So, there is no way to pass Safety net with roms like H-rom g4 or even worse, Los, right?

polfrank said:
So, there is no way to pass Safety net with roms like H-rom g4 or even worse, Los, right?
Click to expand...
Click to collapse
Sorry, i havent installed the roms and just done this on v29a stock.
Have updated the Op with better instructions on how i have done it.
Would be nice if you could try it and report back.
pOpY

polfrank said:
So, there is no way to pass Safety net with roms like H-rom g4 or even worse, Los, right?
Click to expand...
Click to collapse
I was passing Safety net back on the last Official LOS 14.1 using at the time 15.0 Magisk, universal safety fix and magisk hide. I don't remember all the settings, Now I am on CypherOS and still passing with 15.3 and universal. I mod and change my /system all the time and pass.
What is your setup? Maybe with more information I can help.
Edit: also nice post OP. I'll probably be installing Adaway soon, just never bothered. Also for the terminal debloater, what exactly does that do? Just hide the apps? I mainly just use the TWRP terminal and remove apps from /system that way, but I leave some that I am unsure if they are needed or not. Do you know which ones are always required?

Thx, for your kind words.
Adaway is a must have [emoji3]
No ads, yeah.
Regarding the terminal debloater module, it removes the apk and write a placeholder file. The result is the same like you do (remove the apk), BUT you can disable the whole module or enable single apps and system partition isn't touched!
The list above I have written down from several threads and by trial and error.
Until now, no issues...
Wait... One.. Better battery life [emoji56]
pOpY
Gesendet von meinem LG-H815 mit Tapatalk

popy2006 said:
Thx, for your kind words.
Adaway is a must have [emoji3]
No ads, yeah.
Regarding the terminal debloater module, it removes the apk and write a placeholder file. The result is the same like you do (remove the apk), BUT you can disable the whole module or enable single apps and system partition isn't touched!
The list above I have written down from several threads and by trial and error.
Until now, no issues...
Wait... One.. Better battery life [emoji56]
pOpY
Gesendet von meinem LG-H815 mit Tapatalk
Click to expand...
Click to collapse
Thats pretty cool. I may check it out soon. I'm trying to not to use a lot of Magisk modules on such a new rom (CypherOS 5.1) to be sure everything works. But better battery life is my aim right now. Thanks for the explanation.

tambukey said:
Thats pretty cool. I may check it out soon. I'm trying to not to use a lot of Magisk modules on such a new rom (CypherOS 5.1) to be sure everything works. But better battery life is my aim right now. Thanks for the explanation.
Click to expand...
Click to collapse
You are welcome

Final step, OPEN Terminal Emulator and type:
su
debloat
^^the app list to debloat (in OP) are found in both options #1 and #2
One note: Print Spooler is necessary if you plan to print any documents/pictures onto paper from a printer.
Thanks for the guide!!

Guys I can't run Magisk on my LG G4 H815 with Nougat v29a. After removing Supersu and flashing magisk 17.1 with twrp, the phone doesn't boot normally. It reboots recovery when I click reboot system. It always reboot recovery. I don't know why.
Do you have any Idea?

Use magisk 16.0, that's the version I am using. With 17 and 17.1 I also had those issues.
Good luck
pOpY
Gesendet von meinem LG-H815 mit Tapatalk

[ROM][SM-T580][SM-T585][UNOFFICIAL][Lineage-16.0] -> 20181008

Lineage-16.0
SM-T580/585 (32-Bit)
lineage-16.0-20181008-UNOFFICIAL-gtaxlwifi.zip
lineage-16.0-20181008-UNOFFICIAL-gtaxllte.zip
SM-T580/585 (64-Bit)
64_lineage-16.0-20181008-UNOFFICIAL-gtaxlwifi.zip
64_lineage-16.0-20181008-UNOFFICIAL-gtaxllte.zip
Known issues:
- AdvancedDisplay (Samsung) is not working and has been taken out.
- Pls use latest Magisk version (v17.x) - on earlier versions you may get bootloop. (maybe it's booting twice - don't panic)
Camera:
- Google Camera app is not working correctly - and is not tested ! -> Pls do not install yet !
- Normally if you install Google Camera app via gapps you remove the built-in camera app - pls take care yourself !
- The Lineage built-in Camera app works fine - except for rear camera video recoding. (720p)
- OpenCamera app works fine too - also no rear camera video recoding.
- Footej Camera app works fine too - rear camera video recoding is working in this app too !
Changes:
lineage-16.0-20181008
- Google security fixes -> October 2018
- Fix for Doze
- fix for KeyDisabler
- Latest kernel security updates -> thanks to @cschsz
lineage-16.0-20180926
- Fix for Bluetooth
- Change for camera
- Fix for some 32-Bit apps
lineage-16.0-20180924
- Added NavBar
- Added new Android Pie gestures for NavBar (settings->system->gestures)
- Removed SELINUX warning at boot (red warning at left top corner)
- minor changes
lineage-16.0-20180923
- initial release
Installation:
1. Boot into TWRP
2. Wipe system, cache and dalvik and data
3. Install ROM.zip
4. install opengapps
5. install Magisk.zip
6. Reboot into system
Upgrade:
1. Boot into TWRP
2. Install ROM.zip
3. Wipe cache and dalvik
4. Reboot into system
- Please install Magisk.zip yourself.
- If you face any strange issues, pls do a factory reset via TWRP first.
DOWNLOAD:
https://drive.google.com/drive/folders/1uZ4DZ1wN8dpY-AnJhCirr6RsL02PVMrE
TWRP:
Based on OMNI sources .. https://forum.xda-developers.com/showpost.php?p=76564831&postcount=213
https://forum.xda-developers.com/showpost.php?p=75483069&postcount=237
https://forum.xda-developers.com/showpost.php?p=77000830&postcount=401
https://forum.xda-developers.com/showpost.php?p=77340691&postcount=433
twrp-3.2.3-0-gtaxlwifi-OMNI.img
twrp-3.2.3-0-gtaxllte-OMNI.img
SOURCES:
https://github.com/followmsi/manifests/tree/gtaxl-lineage-16.0
Big thanks to @Valera1978 for all his work !
Only the SM-T580 versions have been tested .. tested with Magisk 17.2 and Opengapps.
Enjoy
XDA:DevDB Information
[ROM][SM-T580][SM-T585][UNOFFICIAL][Lineage-16.0], ROM for all devices (see above for details)
Contributors
followmsi
ROM OS Version: 9.x Pie
Version Information
Status: Stable
Created 2018-10-08
Last Updated 2018-10-08

A new fresh thread / project for Lineage-16.0 .. and I did mess up XDA
SM-T580/585 (32-Bit)
lineage-16.0-20181008-UNOFFICIAL-gtaxlwifi.zip
lineage-16.0-20181008-UNOFFICIAL-gtaxllte.zip
SM-T580/585 (64-Bit)
64_lineage-16.0-20181008-UNOFFICIAL-gtaxlwifi.zip
64_lineage-16.0-20181008-UNOFFICIAL-gtaxllte.zip
Changes:
lineage-16.0-20181008
- Google security fixes -> October 2018
- Fix for Doze
- fix for KeyDisabler
- Latest kernel security updates -> thanks to @cschsz
Enjoy

Unroot/Wipe but still CTS profile mismatch

Hey,
I used Magisk for a while now and it worked very good - but now I need to unroot the phone and lock the Bootloader again. What I did so far is:
- Unroot Magisk
- Factory Reset
- Wipe Data
- Wipe System
- Flash full OxygenOS
- Flash full Oxygen Beta (with Pie)
The Tool "SafetyNet Test" still says "CTS profile match: false"
What am I missing?
Thanks for every hint!

Use module "MagiskHide Props Config"

~Dipper~ said:
Use module "MagiskHide Props Config"
Click to expand...
Click to collapse
Thanks! Sadly didn't solve it. What I did:
- Reflash Full ROM
- Root
- Installed "MagiskHide Props Config"
- Installed Busybox
- Unroot
Still CTS profile match = fail ...

You need to CONFIGURE MagiskHide Props Config after installing it.
Magisk Manager > Hamburger menu > Downloads > MagiskHide Props Config
When you tap the module on the downloads screen, a readme file will pop-up. Read it.
Download a terminal or enable the one in developer options. Open terminal and execute the following commands:
su
props
1 - Edit device fingerprint
f - Pick a certified fingerprint
12 - OnePlus
5 - OnePlus 5 (8.1.0)
y - yes (confirm fingerprint)
y - yes (confirm reboot)
Worked great for me.

Oneplus 8T [Android 12] - Fingerprint Reader Not Working Patch File

Hi, while I am facing this issue, thanks to @BillGoss for highlighting the changes required for people who root/magisk installed.
OxygenOs 12 Beta
OxygenOs 12 CBT for kb2001 - working on all variants (you install at your own risk) https://mega.nz/file/CVsgyaAB#zrRWx1vIKUc6pMmNesu8ywpaUSAJWJecDcROvwOGOug
forum.xda-developers.com
So I compared the file with the original @kdrag0n Universal SafetyNet Fix, and the files required to change is:
credit to @BillGoss & @kdrag0n
1st --
system.prop [ORIGINAL from kdrag0n]
# Basic MagiskHide properties
# RootBeer, Microsoft
ro.build.tags=release-keys
# Samsung
ro.boot.warranty_bit=0
ro.vendor.boot.warranty_bit=0
ro.vendor.warranty_bit=0
ro.warranty_bit=0
# SafetyNet
ro.boot.verifiedbootstate=green
ro.boot.veritymode=enforcing
ro.boot.vbmeta.device_state=locked
vendor.boot.vbmeta.device_state=locked
# Other
ro.build.type=user
ro.debuggable=0
ro.secure=1
Click to expand...
Click to collapse
system.prop [MODIFIED]
# Basic MagiskHide properties
# RootBeer, Microsoft
ro.build.tags=release-keys
# Samsung
ro.boot.warranty_bit=0
ro.vendor.boot.warranty_bit=0
ro.vendor.warranty_bit=0
ro.warranty_bit=0
# OnePlus
ro.is_ever_orange=0
# SafetyNet
ro.boot.verifiedbootstate=green
ro.boot.veritymode=enforcing
vendor.boot.vbmeta.device_state=locked
# Other
ro.build.type=user
ro.debuggable=0
ro.secure=1
Click to expand...
Click to collapse
2nd --
service.sh [ORIGINAL from kdrag0n]
# Late props which must be set after boot_completed
{
until [[ "$(getprop sys.boot_completed)" == "1" ]]; do
sleep 1
done
# avoid breaking Realme fingerprint scanners
resetprop ro.boot.flash.locked 1
# avoid breaking OnePlus display modes/fingerprint scanners
resetprop vendor.boot.verifiedbootstate green
}&
Click to expand...
Click to collapse
service.sh [MODIFIED]
# Late props which must be set after boot_completed
{
until [[ "$(getprop sys.boot_completed)" == "1" ]]; do
sleep 1
done
# avoid breaking Realme fingerprint scanners
resetprop ro.boot.flash.locked 1
# avoid breaking Oppo fingerprint scanners
resetprop ro.boot.vbmeta.device_state locked
# avoid breaking OnePlus display modes/fingerprint scanners
resetprop vendor.boot.verifiedbootstate green
}&
Click to expand...
Click to collapse
File Replaced from his last latest release 2.2.1(Zygisk):
1. https://raw.githubusercontent.com/kdrag0n/safetynet-fix/master/magisk/service.sh
2. https://raw.githubusercontent.com/kdrag0n/safetynet-fix/master/magisk/post-fs-data.sh
3. https://raw.githubusercontent.com/kdrag0n/safetynet-fix/master/magisk/system.prop
As I don't know how to build from GitHub, I manually replaced the files shown above. All files are copied from @kdrag0n GitHub Repo [Zygisk version]

Thanks, It work
I just upgrade to android 12 today and fingerprints sensor didn't work

Got an error in the installation.
Device is system-as-root
Unable to extract zip file!
Installation failed

bojiokia said:
Hi, while I am facing this issue, thanks to @BillGoss for highlighting the changes required for people who root/magisk installed.
OxygenOs 12 Beta
OxygenOs 12 CBT for kb2001 - working on all variants (you install at your own risk) https://mega.nz/file/CVsgyaAB#zrRWx1vIKUc6pMmNesu8ywpaUSAJWJecDcROvwOGOug
forum.xda-developers.com
So I compared the file with the original @kdrag0n Universal SafetyNet Fix, and the files required to change is:
credit to @BillGoss & @kdrag0n
1st --
2nd --
File Replaced from his last latest release 2.2.1(Zygisk):
1. https://raw.githubusercontent.com/kdrag0n/safetynet-fix/master/magisk/service.sh
2. https://raw.githubusercontent.com/kdrag0n/safetynet-fix/master/magisk/post-fs-data.sh
3. https://raw.githubusercontent.com/kdrag0n/safetynet-fix/master/magisk/system.prop
As I don't know how to build from GitHub, I manually replaced the files shown above. All files are copied from @kdrag0n GitHub Repo [Zygisk version]
Click to expand...
Click to collapse
How come your zip is 223kb when the one I modified is one only 92kb? See https://forum.xda-developers.com/t/oxygenos-12-beta.4383689/post-86562887

This one's updated with the files from @kdrag0n's GitHub that were updated on the 10th and 12th of March 2022.

Hello, the attached file 'safetynet-fix-v2.2.1.1_Realme_FingerprintFix.zip' does not fix the fingerprint reader for me.
But the other file 'safetynet-fix-v2.2.1-ob1.zip' form the other thread works for me.
My phone version is KB2005_11_C.11, Magisk 24.3 .

I've taken a look into the source code, looks like the issue is now fixed in the commit 55f892fb8855a7867a186970e0bfc31e665ab183. However, @kdrag0n hasn't provided a new release with that commit on Github.
I've cloned the repository (https://github.com/kdrag0n/safetynet-fix.git) and compiled the module myself. I can confirm the module I just compiled fixes the fingerprint issue.
Here's the module I compiled, based on commit 57b726c260bb40b838c5d942965282a5a482bdbe

Hello, thanks for your new patch.
I confirm that the fingerprint reader works with it.
Alas, there is a new issue: Niantic games (e.g. Pokemon Go, Pikmon Bloom ....) wont run now. It looks like there is user authentication issue.
So I'm reverting to 'safetynet-fix-v2.2.1-ob1.zip' for now, where I have both finferprint reader and Niantic games working.

Does anyone have an update solution for the fingerprint problem?
The SaftyNetFix v2.3.1 from kdrag0n does not work for me, the SaftyNet is fine but my fingerprint sensor does not work.
Device: Oneplus 8T EU version OOS12 C.20

Ramme said:
Does anyone have an update solution for the fingerprint problem?
The SaftyNetFix v2.3.1 from kdrag0n does not work for me, the SaftyNet is fine but my fingerprint sensor does not work.
Device: Oneplus 8T EU version OOS12 C.20
Click to expand...
Click to collapse
Did you try previous safetynet-fix-v2.2.1-ob1.zip version?

Yes I have tried all versions from the XDA forum, also from other threads.
I have found the problem. I used Magisk Hide and the SaftyNet script in combination.
Without Magik hide my fingerprint sensor works.
But my CTS profile fails without Magisk Hide.
It is due to the version OOS C.20 "C.21".
Everyone in the OOS forum is reporting a Saftynet problem.
I hope there is a solution from Oneplus as soon as possible.

Ramme said:
Yes I have tried all versions from the XDA forum, also from other threads.
I have found the problem. I used Magisk Hide and the SaftyNet script in combination.
Without Magik hide my fingerprint sensor works.
But my CTS profile fails without Magisk Hide.
It is due to the version OOS C.20 "C.21".
Everyone in the OOS forum is reporting a Saftynet problem.
I hope there is a solution from Oneplus as soon as possible.
Click to expand...
Click to collapse
Hi,
Can you please share the patched boot.img for C.21 IN version, if you have it.
Or tell me the way to patch a boot image.
I am trying with magisk to patch the boot image, but when I do "fastboot boot boot.img" with the patched image, it doesn't work. Magisk doesn't shot Direct install. Basically I am not able to root my C.21 IN version.
Any help would be appreciated.