Hey internet...
I have an Galaxy S5 Neo (SM-G903W) and i rooted it. So i then wanted to go back and unroot it. I usually do that by flashing its own ROM. When i was doing that the cable disconnected from the phone and the stage was at preloader ( or boot loader I'm not sure). So after that it showed me that the software has been damaged. I was like :victory: i didn't brick it. So then i tried to go in download mode and it let me but then just turned off and wouldn't turn back on. I searched on the web for help and i tried building a usb jig ( still working on that ) but they didn't help at all. I'm gonna take it to a shop tomorrow to ask someone what's wrong with it. Any suggestions?
More Info
Used CF Root method
SM-G903W
Serial # :RF8H80D1JWT
Regards, A.G
remove battery 30 seconds, push cable on PC and PHONE wait 30 sec, after 30sec put battery back, and open volume down + home + power , work?
drunx said:
remove battery 30 seconds, push cable on PC and PHONE wait 30 sec, after 30sec put battery back, and open volume down + home + power , work?
Click to expand...
Click to collapse
About that,
when I took it to the shop the guy told me that its not bricked, the battery is damaged. so I went and replaced the battery and flashed my rom and it booted up and charged but it started heating up. it was at 16 percent when suddenly It went to 0 and turned off. Right now its charging but I don't know what to do about the phone.
Any Help?
Related
my tmobile vibrant went down few hours ago ,i was rebooting clock..recov an it reboot into the open galaxy s logo an wont do anything . it wont boot back into recovery an it doesnt even show the battery charging .thats the only other screen i can get .....what have i done an plz tell me there an answer!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1
Try plugging one end of the usb cable while holding down the volume buttons now plug in the other end of the usb cable while still holding the buttons. This should get you to download mode and subsequently you can odin back to stock.
Sent from my JPJPM V2 powered SGH-T959 using XDA App
monster2321 said:
my tmobile vibrant went down few hours ago ,i was rebooting clock..recov an it reboot into the open galaxy s logo an wont do anything . it wont boot back into recovery an it doesnt even show the battery charging .thats the only other screen i can get .....what have i done an plz tell me there an answer!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1
Click to expand...
Click to collapse
No it's not bricked use the toolbox and you can start over.
http://forum.xda-developers.com/showthread.php?t=954509
Just bootlooped. You may need to odin back to stock and start over don't know not enough info. Check the toolbox, but more importantly, read the noob guide it has all the ways to solve there
tx man i just now got in download mode ....if ur online i would relly appreciate if u would throw me few tips ,,,,i never used odin before
can u unplug usb while in download mode {vibrant}
can u disconnect an reconnect usb while in DL mode without losing DL mode ????? it took me forever to get in DL mode..an comp. says device unreckonized ,,the drivers are installed ,,,do i need rconnect???????????????????????
yes just don't pull the battery
Today, I attempt to root my G2 and i done so successfully. After I attempted to add a recovery via Flashify as told to me from someone from this site and it softed bricked my phone to where i only powered on to fastboot mode. After researching further I attempted the ubuntu fix for the situation and after I cant turn my phone on and there is no charge light indication. HELP PLZ
deetea48601 said:
Today, I attempt to root my G2 and i done so successfully. After I attempted to add a recovery via Flashify as told to me from someone from this site and it softed bricked my phone to where i only powered on to fastboot mode. After researching further I attempted the ubuntu fix for the situation and after I cant turn my phone on and there is no charge light indication. HELP PLZ
Click to expand...
Click to collapse
hold power down for 20 seconds. let phone sit for 1 minute. now hold power and volume down. this should bring you to a white reset screen. press power 3 times.
gentlemandroid17 said:
hold power down for 20 seconds. let phone sit for 1 minute. now hold power and volume down. this should bring you to a white reset screen. press power 3 times.
Click to expand...
Click to collapse
i tried that and nothing happened.
When you plug in USB does charge light come on. Sounds like a battery went dead.
Sent from my LG-D802 using Tapatalk
I've heard some people are having issues with the charge port and/or cord also. Maybe try another cord and make sure it's plugging in tightly? I think the last person covered everything else.
gentlemandroid17 said:
When you plug in USB does charge light come on. Sounds like a battery went dead.
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
No charge light at all =/
I had the same problem, it occured while switching from cwm to twrp. i used the unbuntu method ( i think you mean this right here: http://forum.xda-developers.com/showthread.php?t=2582142)
are you sure you were in fastboot mode? because i wasnt and it should say so in the top left corner if you were.
try different cords/ usb ports or even pc's to charge it. my mac couldn't find it at all, my windows did.
UnknownCloakedMan said:
I've heard some people are having issues with the charge port and/or cord also. Maybe try another cord and make sure it's plugging in tightly? I think the last person covered everything else.
Click to expand...
Click to collapse
Cord charge my tab just fine, therefore im assuming the cord is fine... i think
i have the same problem
deetea48601 said:
Today, I attempt to root my G2 and i done so successfully. After I attempted to add a recovery via Flashify as told to me from someone from this site and it softed bricked my phone to where i only powered on to fastboot mode. After researching further I attempted the ubuntu fix for the situation and after I cant turn my phone on and there is no charge light indication. HELP PLZ
Click to expand...
Click to collapse
I have the same problem my phone is completly dead i don't know what else can i do, the linux tutorial doesn't work because the pc don't detects the phone
did tou guys check if the twrp image you downloaded was correct size? Wonder if a bad download could cause this.
bachera said:
did tou guys check if the twrp image you downloaded was correct size? Wonder if a bad download could cause this.
Click to expand...
Click to collapse
For me the brick happened when i was flashing KK with TWRP, during the flashing appears something that said "couldn't not mount system" and the phone shut down and never power up again , no usb no charge, no linux, no nothing, when i plug my device in windows appears that the devices cannot install the drivers, and i've tried all the drivers and still doesn't work
Hold power down until phone is completely off. Then, hold power and down volume until you see LG logo. As soon as you see the LG logo, release and then quickly press power and down again. Hold until you see a white screen. Then go from there.
techbeck said:
Hold power down until phone is completely off. Then, hold power and down volume until you see LG logo. As soon as you see the LG logo, release and then quickly press power and down again. Hold until you see a white screen. Then go from there.
Click to expand...
Click to collapse
i've tried all the possible combinations of buttons and no one works, i've been holding the power button for a whole minute and nothing happened, and the other combination either, nothing seems to work i give up
It's just power you press after the logo, not power and volume down.
pimfram said:
It's just power you press after the logo, not power and volume down.
Click to expand...
Click to collapse
There's no logo, 'cause it doesn't turn on by any means , no matter what button or combination i press, there's no response.
Thanks
Have you tried getting into download mode?
pimfram said:
Have you tried getting into download mode?
Click to expand...
Click to collapse
i've tried everything, download mode, linux, recovery, lg mobile, and nothing works i think it's completly brick, i hope one day someone comes with the solution, because i went today to SAT and they don't even know what happened with my phone, and i bought it in another country so they don't want to get involve
So all you get is a black screen with you boot? There's probably a way to push whatever file might be missing or even an entire ROM but I lack the knowledge on how to do that. I remember I had to work some magic on my Galaxy Nexus but I used a toolkit so I'm afraid I've got no really useful information for you.
This also happened to me!
I am in the same state.
I rooted the LG, I installed the custom Rom, I installed an updated GAPPS and it wasnt working. I then went and installed another GAPPS overtop and I got stuck in boot loop. After I tried recovery from ADB I tried to restore from TRWP and it didnt take. After I rebooted nothing turned on, no LED, I tried ALL button combinations and nothing comes on at all. I am wondering if the phone died and now will not charge...I started with 60% but the last time i saw it it was down to 15% just thinking maybe it died completely and without any software to boot it wont charge...I have had it on charge for 8 hrs since and still nothing...
Please help!
Bobert the great said:
I am in the same state.
I rooted the LG, I installed the custom Rom, I installed an updated GAPPS and it wasnt working. I then went and installed another GAPPS overtop and I got stuck in boot loop. After I tried recovery from ADB I tried to restore from TRWP and it didnt take. After I rebooted nothing turned on, no LED, I tried ALL button combinations and nothing comes on at all. I am wondering if the phone died and now will not charge...I started with 60% but the last time i saw it it was down to 15% just thinking maybe it died completely and without any software to boot it wont charge...I have had it on charge for 8 hrs since and still nothing...
Please help!
Click to expand...
Click to collapse
I'm afraid to tell you, but our phones die there's nothing to do to saved them, we just have to keep them in that state meanwhile the solution comes up, because in this very moment there's nothing we can do
So Im going to start from the beginning. I have a Verizon Note 3 MJE, rooted with VROOT, cool now Im rooted.
Now i wanted a Custom Rom, So i downloaded Safestrap 3.64 and the Hyperdrive Rom. All good..
Go into the slots of Safestrap recovery create the partition, install HyperDrive and hit Reboot...
Phone reboots but the screen stays blank.. Go do my research and says wait 5-10 minutes after install for w.e reason..
20 minutes go by... go back into safestrap re do process... nothing again.. decided to go back to stock download all Safestraps and one by one start to install and uninstall trying to verify that i have installed the correct Safestrap for installing the Rom... (i know don't tell me Im an idiot but it made sense last night) nothing that i did work... so went back to stock JB 4.3 so now Im rooted as i began...
go into the Safestrap app and uninstall from recovery this one was Safestrap 3.71.. phone is working fine..
So I have no Safestrap im good... set my phone down to clean my car, the phone Wont turn on..
NOOOOOOOO, IDK for the life of me What happened... So i try every button possible, nothing! Recovery Nothing!!!
I plug it to charge it shows the pre charging battery then shuts and repeats...
figured let me try holding Down-Menu-Power while is doing that ... i get into Download mode, Not gonna lie i cried a little lol
Flashed the Stock Firmware 4.3 with the VZW note 3 32g PIT file... finishes ... Resets now Stuck on BOOTLOOP with the Custom Note 3 Splash screen and on top says Entering Recovery but never does... I Have Tried almost everything but hit it with a BAT!!! Can someone please help me...
and YES i took the battery out and put it back in
1. pull sd card
2. hold vol down, home, power to enter "download mode"
3. hit cancel and it should fire up
fletch33 said:
1. pull sd card
2. hold vol down, home, power to enter "download mode"
3. hit cancel and it should fire up
Click to expand...
Click to collapse
The phone will only work if is plugged in to A\C OR computer usb..
I plug it in, the loading battery will pop up, turn off and then repeat.. the whole process takes about 3-4 secs..if unplugged wont do anything at all, when plugged into the computer it lets me access download mode but not recovery..
crunchy_taco said:
The phone will only work if is plugged in to A\C OR computer usb..
I plug it in, the loading battery will pop up, turn off and then repeat.. the whole process takes about 3-4 secs..if unplugged wont do anything at all, when plugged into the computer it lets me access download mode but not recovery..
Click to expand...
Click to collapse
Sent from my SM-N900V using XDA Free mobile app
I would try flashing the stock unrooted mje file by itself.
If you are in same boat then I would flash the pit file by itself. AFTER
All of which is done in odin.
i 2nd that ^^^
mike7728 said:
i 2nd that ^^^
Click to expand...
Click to collapse
Ok I will try that I soon as I get home I will let u guys know how it went
Thanks for all your help guys
crunchy_taco said:
The phone will only work if is plugged in to A\C OR computer usb..
I plug it in, the loading battery will pop up, turn off and then repeat.. the whole process takes about 3-4 secs..if unplugged wont do anything at all, when plugged into the computer it lets me access download mode but not recovery..
Click to expand...
Click to collapse
To be honest...that sounds like a dead battery. You know someone else who has a note 3 you can test by trying their battery?
Sent from my Note 3 via Tapatalk
donc113 said:
To be honest...that sounds like a dead battery. You know someone else who has a note 3 you can test by trying their battery?
Sent from my Note 3 via Tapatalk
Click to expand...
Click to collapse
I tried the battery on another note 3 and vise versa, I got it to go into recovery after flashing stock room at one point and full wiped factory reset it from recovery the fone reset twice and it booted to the welcome screen of picking language but shut off wont turn back on.. so square one again battery bootloop and note 3 bootloop when try to access recovery
Hello guys,
I am in a big trouble!!
I have a galaxy s4 i9500. I installed prism barebone by aliraqi and left it for chanrging and after sometime when I looked into my phone it was looping at the intro screen (i.e. the screen which shows galaxy s4 i9500 in white on a black background).
I cant even go to recovery or download mode.
When I connect my phone to charger it shows the battery logo with a bolt in it and it gets really hot and it doesnt show any charge in the battery.
Please help me ASAP.
EDIT : It was a problem with the power button.
please try this .. daring to reply you .. remove the back cover .. remove battery .. remove sim card .. remove memory card .. keep the phone in open for 40 mins ..
u can buy a universal charger to charge the battery.. then reinsert everything back.. then try to check if you are able to go to download or recovery mode .. u can also try to go to safe mode and check if you are able to charge ..
jamesmcd said:
please try this .. daring to reply you .. remove the back cover .. remove battery .. remove sim card .. remove memory card .. keep the phone in open for 40 mins ..
u can buy a universal charger to charge the battery.. then reinsert everything back.. then try to check if you are able to go to download or recovery mode .. u can also try to go to safe mode and check if you are able to charge ..
Click to expand...
Click to collapse
Tried it but when i try to boot into download mode, in the interface which appears before the download mode when I press volume up, nothing happens but when I press the down button it reboots and I get a loop.
I even bought a new battery and tried booting but no luck.
EDIT : FIXED!!! IT WAS A PROBLEM WITH THE POWER BUTTON. THANKS ANYWAYS FOR REPLYING.
Have you tried flash a new bootloader . I guess u can use flashify ..
UchihaKakarot said:
Tried it but when i try to boot into download mode, in the interface which appears before the download mode when I press volume up, nothing happens but when I press the down button it reboots and I get a loop.
I even bought a new battery and tried booting but no luck.
Click to expand...
Click to collapse
Hello guys,
A day ago I decided to root my Huawei P10 lite. I unlocked bootloader and flashed TWRP. Everything worked fine. However I was unable to root my phone so I tried to lock bootloader. Thats where my problem started.... I locked bootloader via ADB and then it said the phone will reboot and factory reset. Phone was rebooted but now its ,,stucked" on huawei logo screen and nothing happens.... I just let phone to discharge and when I try to turn it on its still get to the logo screen and nothing. Always when I try to turn phone off it keeps turning on to the logo screen and Im unable to go to recovery or safe mode because button combination dont work. I cant even connect it to the PC via the USB cable....
Any ideas how to fix it (if its even possible) would be much apreciated.
Thanks a lot guys.
So, even you if you mounted the /system partition read-write it gets modified and the signature breaks that's why your phone no longer boots.
Try following: shutdown the phone if you can, press volume down and at the same time plug in the USB cable and unlock the bootloader, then flash the latest firmware for the device using the HwOTA method:
https://forum.xda-developers.com/p10-lite/development/hwota-huawei-p10-lite-t3776186
https://forum.xda-developers.com/p1...pilation-firmware-flasheables-huawei-t3736754
Eurofighter_ty said:
So, even you if you mounted the /system partition read-write it gets modified and the signature breaks that's why your phone no longer boots.
Try following: shutdown the phone if you can, press volume down and at the same time plug in the USB cable and unlock the bootloader, then flash the latest firmware for the device using the HwOTA method:
https://forum.xda-developers.com/p10-lite/development/hwota-huawei-p10-lite-t3776186
https://forum.xda-developers.com/p1...pilation-firmware-flasheables-huawei-t3736754
Click to expand...
Click to collapse
Thats the problem, the phone cant be shut downed by the ,,official" way (hold power button) because it instatly power on after two seconds... Only way how to completely shut down is let the phone discharge.... Anyway when I try to shut down the phone and then instatly press volume down I always get to the logo screen then I get black screen (looks like its trying to do something) and then the phone reboots and again get logo screen... It looks like the phone is gone for good lol
Eurofighter_ty said:
So, even you if you mounted the /system partition read-write it gets modified and the signature breaks that's why your phone no longer boots.
Try following: shutdown the phone if you can, press volume down and at the same time plug in the USB cable and unlock the bootloader, then flash the latest firmware for the device using the HwOTA method:
https://forum.xda-developers.com/p10-lite/development/hwota-huawei-p10-lite-t3776186
https://forum.xda-developers.com/p1...pilation-firmware-flasheables-huawei-t3736754
Click to expand...
Click to collapse
Thats the problem, the phone cant be shut downed by the ,,official" way (hold power button) because it instatly power on after two seconds... Only way how to completely shut down is let the phone discharge.... Anyway when I try to shut down the phone and then instatly press volume down I always get to the logo screen then I get black screen (looks like its trying to do something) and then the phone reboots and again get logo screen... It looks like the phone is gone for good lol
EDIT
It worked as you said (holding volume down + USB) and phone booted successfully but then appeared shutting down possibly due to low battery... I will keep trying. So thank you very much, you saved my day lol.
Allright, the phone is gone for good... Whenever I try your trick (volume down + USB) the phone boot up to the OS but then always shut down because of low battery. I tried to charge the battery but it seems like its not charging at all... Got phone on charger for three hours now and still red LED diod shows low battery.... I think this thread can be closed and I will bring the phone to the service center and see if they can fix this or not. Again thanks for the help.
Try to charge it when is in bootloop or that's what you tried?
Eurofighter_ty said:
Try to charge it when is in bootloop or that's what you tried?
Click to expand...
Click to collapse
Yeah, now I have it on charger for 5 hours, got huawei logo on screen and red LED diod flashing... Strange thing is the phone is not heating anymore, even charger is cold... When I un-plug the charger the phone shut down in like 5 minutes... When its on charger its not turnning off so I assuming there must be some power coming through the charger to phone then...
This Huawei P10 Lite is quite strange piece of electronic.... Its just booted itself on its own and actually its working just fine... What would you recommend to do, now? battery is charging right now at 16%
pathfindercz said:
This Huawei P10 Lite is quite strange piece of electronic.... Its just booted itself on its own and actually its working just fine... What would you recommend to do, now? battery is charging right now at 16%
Click to expand...
Click to collapse
What do you mean by working just fine ? It booted to the OS or what ?
Eurofighter_ty said:
What do you mean by working just fine ? It booted to the OS or what ?
Click to expand...
Click to collapse
I left it plugged on charger and after few hours it booted to the OS, but when I tried to go to Fastboot and Rescue mode it turned off and now It wont boot again. Got stucked on huawei logo screen again.