Database Users

Hard bricked lg g2!!

Today, I attempt to root my G2 and i done so successfully. After I attempted to add a recovery via Flashify as told to me from someone from this site and it softed bricked my phone to where i only powered on to fastboot mode. After researching further I attempted the ubuntu fix for the situation and after I cant turn my phone on and there is no charge light indication. HELP PLZ

deetea48601 said:
Today, I attempt to root my G2 and i done so successfully. After I attempted to add a recovery via Flashify as told to me from someone from this site and it softed bricked my phone to where i only powered on to fastboot mode. After researching further I attempted the ubuntu fix for the situation and after I cant turn my phone on and there is no charge light indication. HELP PLZ
Click to expand...
Click to collapse
hold power down for 20 seconds. let phone sit for 1 minute. now hold power and volume down. this should bring you to a white reset screen. press power 3 times.

gentlemandroid17 said:
hold power down for 20 seconds. let phone sit for 1 minute. now hold power and volume down. this should bring you to a white reset screen. press power 3 times.
Click to expand...
Click to collapse
i tried that and nothing happened.

When you plug in USB does charge light come on. Sounds like a battery went dead.
Sent from my LG-D802 using Tapatalk

I've heard some people are having issues with the charge port and/or cord also. Maybe try another cord and make sure it's plugging in tightly? I think the last person covered everything else.

gentlemandroid17 said:
When you plug in USB does charge light come on. Sounds like a battery went dead.
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
No charge light at all =/

I had the same problem, it occured while switching from cwm to twrp. i used the unbuntu method ( i think you mean this right here: http://forum.xda-developers.com/showthread.php?t=2582142)
are you sure you were in fastboot mode? because i wasnt and it should say so in the top left corner if you were.
try different cords/ usb ports or even pc's to charge it. my mac couldn't find it at all, my windows did.

UnknownCloakedMan said:
I've heard some people are having issues with the charge port and/or cord also. Maybe try another cord and make sure it's plugging in tightly? I think the last person covered everything else.
Click to expand...
Click to collapse
Cord charge my tab just fine, therefore im assuming the cord is fine... i think

i have the same problem
deetea48601 said:
Today, I attempt to root my G2 and i done so successfully. After I attempted to add a recovery via Flashify as told to me from someone from this site and it softed bricked my phone to where i only powered on to fastboot mode. After researching further I attempted the ubuntu fix for the situation and after I cant turn my phone on and there is no charge light indication. HELP PLZ
Click to expand...
Click to collapse
I have the same problem my phone is completly dead i don't know what else can i do, the linux tutorial doesn't work because the pc don't detects the phone

did tou guys check if the twrp image you downloaded was correct size? Wonder if a bad download could cause this.

bachera said:
did tou guys check if the twrp image you downloaded was correct size? Wonder if a bad download could cause this.
Click to expand...
Click to collapse
For me the brick happened when i was flashing KK with TWRP, during the flashing appears something that said "couldn't not mount system" and the phone shut down and never power up again , no usb no charge, no linux, no nothing, when i plug my device in windows appears that the devices cannot install the drivers, and i've tried all the drivers and still doesn't work

Hold power down until phone is completely off. Then, hold power and down volume until you see LG logo. As soon as you see the LG logo, release and then quickly press power and down again. Hold until you see a white screen. Then go from there.

techbeck said:
Hold power down until phone is completely off. Then, hold power and down volume until you see LG logo. As soon as you see the LG logo, release and then quickly press power and down again. Hold until you see a white screen. Then go from there.
Click to expand...
Click to collapse
i've tried all the possible combinations of buttons and no one works, i've been holding the power button for a whole minute and nothing happened, and the other combination either, nothing seems to work i give up

It's just power you press after the logo, not power and volume down.

pimfram said:
It's just power you press after the logo, not power and volume down.
Click to expand...
Click to collapse
There's no logo, 'cause it doesn't turn on by any means , no matter what button or combination i press, there's no response.
Thanks

Have you tried getting into download mode?

pimfram said:
Have you tried getting into download mode?
Click to expand...
Click to collapse
i've tried everything, download mode, linux, recovery, lg mobile, and nothing works i think it's completly brick, i hope one day someone comes with the solution, because i went today to SAT and they don't even know what happened with my phone, and i bought it in another country so they don't want to get involve

So all you get is a black screen with you boot? There's probably a way to push whatever file might be missing or even an entire ROM but I lack the knowledge on how to do that. I remember I had to work some magic on my Galaxy Nexus but I used a toolkit so I'm afraid I've got no really useful information for you.

This also happened to me!
I am in the same state.
I rooted the LG, I installed the custom Rom, I installed an updated GAPPS and it wasnt working. I then went and installed another GAPPS overtop and I got stuck in boot loop. After I tried recovery from ADB I tried to restore from TRWP and it didnt take. After I rebooted nothing turned on, no LED, I tried ALL button combinations and nothing comes on at all. I am wondering if the phone died and now will not charge...I started with 60% but the last time i saw it it was down to 15% just thinking maybe it died completely and without any software to boot it wont charge...I have had it on charge for 8 hrs since and still nothing...
Please help!

Bobert the great said:
I am in the same state.
I rooted the LG, I installed the custom Rom, I installed an updated GAPPS and it wasnt working. I then went and installed another GAPPS overtop and I got stuck in boot loop. After I tried recovery from ADB I tried to restore from TRWP and it didnt take. After I rebooted nothing turned on, no LED, I tried ALL button combinations and nothing comes on at all. I am wondering if the phone died and now will not charge...I started with 60% but the last time i saw it it was down to 15% just thinking maybe it died completely and without any software to boot it wont charge...I have had it on charge for 8 hrs since and still nothing...
Please help!
Click to expand...
Click to collapse
I'm afraid to tell you, but our phones die there's nothing to do to saved them, we just have to keep them in that state meanwhile the solution comes up, because in this very moment there's nothing we can do

Hardbricked stuck on "Your device has been unlocked" and blinking red light

Hey guys i really need your help, i decided to unlock the bootloader of my phone, and so i did without any issue, the phone opened and worked completly, so i wanted to relock it and so i did also without any issue, but i wanted root again so i tried to unlock it again with the same Code with the official unlocking way, but this time the phone have been stuck and red led notification blinking everytime i put in on computer.
If i plug off the power source and try to open the device the red light blink very fast and there is a charging symbol on the screen but then dissapers instantly and nothing the phone turning off.
I cannot enter on recovery or dload, anyone knows what to do? The PC cant recognize the phone if i plug it.
Here some video to check the issue, please turn on the subtitles because im speaking Greek https://www.youtube.com/watch?v=oTkx0ifNhg4
Also here https://www.youtube.com/watch?v=F9dS76eRe0c
Huawei is one of the worst companies i ever saw! Their phones are so easy to brick and they can't be fixed!

Wait until the battery drained and phone shutdown, connect charger again and wait for 5 minutes , it will turn on in erecovery , shutdown and redo fastboot etc carefully.

Dr4In said:
Hey guys i really need your help, i decided to unlock the bootloader of my phone, and so i did without any issue, the phone opened and worked completly, so i wanted to relock it and so i did also without any issue, but i wanted root again so i tried to unlock it again with the same Code with the official unlocking way, but this time the phone have been stuck and red led notification blinking everytime i put in on computer.
If i plug off the power source and try to open the device the red light blink very fast and there is a charging symbol on the screen but then dissapers instantly and nothing the phone turning off.
I cannot enter on recovery or dload, anyone knows what to do? The PC cant recognize the phone if i plug it.
Huawei is one of the worst companies i ever saw! Their phones are so easy to brick and they can't be fixed!
Click to expand...
Click to collapse
Dissconnect the usb cable and hold the power button. When it is just about to reboot, plug in the USB and hold the volume down button. This should take you to fastboot OR to error mode...
-------
Huawei devices aren't easy to brick, but recovering the devices is a pain... I hard bricked my device as well a couple weeks ago..

I have tried to wait for the battery drained completly and if you plug the usb while the phone is off the phone is powering on automatically and stays to the "Your Device has been unlocked"
Also with the same method before i plug in the usb i was trying to hold the volume down button and plug it in but it didnt happend it is booting on the same thing.

Dr4In said:
I have tried to wait for the battery drained completly and if you plug the usb while the phone is off the phone is powering on automatically and stays to the "Your Device has been unlocked"
Also with the same method before i plug in the usb i was trying to hold the volume down button and plug it in but it didnt happend it is booting on the same thing.
Click to expand...
Click to collapse
pls clear actual screen position of ur fone, unlock screen titled as fastboot and rescue or yellow text with black background.
chances are there u get fastboot connection by turning off mobile by power button hold for 7 seconds and phone turned off wait for a while ensure no USB cable connected to phone. then press volume down button and conect USB cable, you will see fast boot and rescue screen. now issue command fastboot devices. if u see ur devices serial number there then follow further fasboot procedure mentioned in other threads,
Fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system.img
above files may be obtained by extracting update.app for ur phone stock image by huawei extractor. you have to work for 2 days constantly for unbricking phone. I have gone through all these processes last week.

rizwansadiq said:
pls clear actual screen position of ur fone, unlock screen titled as fastboot and rescue or yellow text with black background.
chances are there u get fastboot connection by turning off mobile by power button hold for 7 seconds and phone turned off wait for a while ensure no USB cable connected to phone. then press volume down button and conect USB cable, you will see fast boot and rescue screen. now issue command fastboot devices. if u see ur devices serial number there then follow further fasboot procedure mentioned in other threads,
Fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system.img
above files may be obtained by extracting update.app for ur phone stock image by huawei extractor. you have to work for 2 days constantly for unbricking phone. I have gone through all these processes last week.
Click to expand...
Click to collapse
Hi, I have a similar problem: "your device has been unlocked and can't be trusted". I cannot enter fastboot nor with the two buttons method (power + volume down) or the three buttons method. I messed up with the EMUI, I guess. Infact, I unlocked the bootloader, relocked it and tried to unlock it again to flash a custom ROM. The first time I unlocked the bootloader, I tried to install TWRP but something went bad, I do not remember what, but I decided to relock.
Now I am stuck with this message. But....sometimes, I can't understand WHEN, I can enter my phone Last time it was when I tried the above solution (only volume down and usb cable, without the Power button). When the phone turned on, HiSuite recognized "a phone" was connected because the software turned on, but it couldn't really see it. I went into the Developer Options on the phone to turn on OEM, but it was grey and I could do nothing :crying:
Full of hope because the phone turned on, I then tried to flash the content of the SD Card (where I put files extracted with the Huawei Update Extractor) by holding the three buttons (power + volume up + volume down), but again it appeared the "your device has been unlocked" message.
Now the phone is off. Once, in the meantime, it appeared a red flash on the screen for one second, I am not sure it is related to the battery, it doesn't display a battery but only a flash.
I cannot enter fastboot in any way, I cannot flash from SD card, sure I cannot rollback because it implies flashing.
My only hope is some command to be given when I can enter the phone. Anyway, I sent it to repair (not official, I have obviously no guarantee anymore) and they sent it back to me: they didn't know what to do.
Any idea? Thanks a lot!
PS: I will read your replies as soon as I can but I have very variable ad unstable working hours!

Please don't blame Huawei for YOUR mistakes. Thank you

Johnny TDN said:
Please don't blame Huawei for YOUR mistakes. Thank you
Click to expand...
Click to collapse
Did I? Sorry if it seemed so, but of course are my mistakes...

help us
i have a same problem did you find solution

Same Problem Here
I have the same issue. Have anyone found a solution yet?

Dr4In said:
Hey guys i really need your help, i decided to unlock the bootloader of my phone, and so i did without any issue, the phone opened and worked completly, so i wanted to relock it and so i did also without any issue, but i wanted root again so i tried to unlock it again with the same Code with the official unlocking way, but this time the phone have been stuck and red led notification blinking everytime i put in on computer.
If i plug off the power source and try to open the device the red light blink very fast and there is a charging symbol on the screen but then dissapers instantly and nothing the phone turning off.
I cannot enter on recovery or dload, anyone knows what to do? The PC cant recognize the phone if i plug it.
Here some video to check the issue, please turn on the subtitles because im speaking Greek https://www.youtube.com/watch?v=oTkx0ifNhg4
Also here https://www.youtube.com/watch?v=F9dS76eRe0c
Huawei is one of the worst companies i ever saw! Their phones are so easy to brick and they can't be fixed!
Click to expand...
Click to collapse
I think the red light blinks cause you are critically low on power. Leave it plugged in. Ignore whats on the screen just leave it plugged in for a few hours and leave it alone.

Meticulus said:
I think the red light blinks cause you are critically low on power. Leave it plugged in. Ignore whats on the screen just leave it plugged in for a few hours and leave it alone.
Click to expand...
Click to collapse
Same here with a BLN-L21 (Honor 6x)
The phone will not charge with this method. Try to let it plug one night, and no charge !
@Meticulus this was the question felix ask you: is uboot (booting with sdcard) is possible ?
Fixed for me with buy an honor 9 ... but investigate to revive my honor 6x.
For now i have maybe found how to shutdown phone, to charge battery (with shurtcut two point in motherboard) but don't know if phone charge for the moment because there is no light
Solution for the moment but difficult AND / OR expensive ....
1. Remove emmc and repair it with a JTAG box.
2. Try to boot with uboot (but probably won't work)
---------- Post added at 03:32 PM ---------- Previous post was at 02:57 PM ----------
Dr4In said:
Hey guys i really need your help, i decided to unlock the bootloader of my phone, and so i did without any issue, the phone opened and worked completly, so i wanted to relock it and so i did also without any issue, but i wanted root again so i tried to unlock it again with the same Code with the official unlocking way, but this time the phone have been stuck and red led notification blinking everytime i put in on computer.
If i plug off the power source and try to open the device the red light blink very fast and there is a charging symbol on the screen but then dissapers instantly and nothing the phone turning off.
I cannot enter on recovery or dload, anyone knows what to do? The PC cant recognize the phone if i plug it.
Here some video to check the issue, please turn on the subtitles because im speaking Greek https://www.youtube.com/watch?v=oTkx0ifNhg4
Also here https://www.youtube.com/watch?v=F9dS76eRe0c
Huawei is one of the worst companies i ever saw! Their phones are so easy to brick and they can't be fixed!
Click to expand...
Click to collapse
Hello, can ask you some question about how you have hardbricked this phone ?
My honor 6x is same bricked, and red light too. So the big question is THE FIRSTIME BRICK = phone was FREEZE can't reboot and can't do nothing. I have wait for empty battery, and now dload and all is not working ?
I will try to charge my battery out of phone. For me it's like the phone never charge ... but i will try with a charged battery and plug unplug battery connector. It's like red screen low battery change boot mode ...

sanjay.rup said:
Same here with a BLN-L21 (Honor 6x)
The phone will not charge with this method. Try to let it plug one night, and no charge !
@Meticulus this was the question felix ask you: is uboot (booting with sdcard) is possible ?
Fixed for me with buy an honor 9 ... but investigate to revive my honor 6x.
For now i have maybe found how to shutdown phone, to charge battery (with shurtcut two point in motherboard) but don't know if phone charge for the moment because there is no light
Solution for the moment but difficult AND / OR expensive ....
1. Remove emmc and repair it with a JTAG box.
2. Try to boot with uboot (but probably won't work)
---------- Post added at 03:32 PM ---------- Previous post was at 02:57 PM ----------
Hello, can ask you some question about how you have hardbricked this phone ?
My honor 6x is same bricked, and red light too. So the big question is THE FIRSTIME BRICK = phone was FREEZE can't reboot and can't do nothing. I have wait for empty battery, and now dload and all is not working ?
I will try to charge my battery out of phone. For me it's like the phone never charge ... but i will try with a charged battery and plug unplug battery connector. It's like red screen low battery change boot mode ...
Click to expand...
Click to collapse
Its not actually mine and it was long time ago, but the owner told me that he unlocked bootloader with the official way, relocked, and then he unlocked again the third time the phone died.

Hello.
me too, he does not want to do anything anymore.
he only knows this '' your device is booting now '' screen with the red LED flashing.
whatever I do, it always starts on this screen. I think you have to change the motherboard.
Do you know where to find it at a reasonable price?
VNS-l31

Your device has been unlocked and can't be trusted
after i try to unlock my huawei P9 lite, my phone show this message "Your device has been unlocked and can't be trusted" and i can't restart or load from sd card.
i put update.app in new folder "dload", put the sd card in phone.... no boot. my laptop not detect usb phone. help me please.

ionut69 said:
after i try to unlock my huawei P9 lite, my phone show this message "Your device has been unlocked and can't be trusted" and i can't restart or load from sd card.
i put update.app in new folder "dload", put the sd card in phone.... no boot. my laptop not detect usb phone. help me please.
Click to expand...
Click to collapse
I fixed mine today. I just had to wait for 5 hours for the battery to drain. then when it shuts off i waited 10 min. after that i started the phone and i let me choose to continue to the phone.
I dunno if you have the exact same problem but thats how i fixed mine.
And after that i tried factory resetting (cause bluetooth and NFC didn't work) but then it got stuck again. so i waited it out and it worked once again.
Too scared to do anything to my phone now :/

alesbabnik said:
I fixed mine today. I just had to wait for 5 hours for the battery to drain. then when it shuts off i waited 10 min. after that i started the phone and i let me choose to continue to the phone.
I dunno if you have the exact same problem but thats how i fixed mine.
And after that i tried factory resetting (cause bluetooth and NFC didn't work) but then it got stuck again. so i waited it out and it worked once again.
Too scared to do anything to my phone now :/
Click to expand...
Click to collapse
now my battery is empty but when i plug in acc cable show same screen

any fix on this as I have the same issue with huawei p9 lite - no recovery mode, no usb reckognition from pc. Just stuck on that "unsafe" prompt screen after huawei logo

Stop buying huawei phones if you are into custom roms or root. They made the phone easily brickable and they removed the bootloader unlock site due to some stores installing malware into phones. But hey, they couldn't simply do what Xiaomi is doing eh?

[Solved] Cannot use battery power on recovery and system

So, here's my situation, my phone suddenly turned off last night while installing a game, when i tried to power it up, it "blinking" on the boot logo, it keeps turned on and off, so i reckon its battery has run out, so i charge it, then it works, it can boot to system, after it shows around 80% i unplugged the charger but the phone then suddenly turned off and again, blinking on the boot logo.. so i charge it again just to see it boot to system and shows 80% battery.. i tried to charge it to 100%, but at 100%, the phone suddenly died, again..
at first i thought it might be a battery problem, or power circuit thingy, but here's the catch, it can hold for 30 mins + on bootloader mode..
can someone tell me what is wrong with my phone?
EDIT: flashed stock ROM and Recovery, still no use
EDIT2: Did the QPST as suggested as Rwepradeep, still blinking on lenovo logo
EDIT3: Solved! Battery was the actual problem

chlova said:
So, here's my situation, my phone suddenly turned off last night while installing a game, when i tried to power it up, it "blinking" on the boot logo, it keeps turned on and off, so i reckon its battery has run out, so i charge it, then it works, it can boot to system, after it shows around 80% i unplugged the charger but the phone then suddenly turned off and again, blinking on the boot logo.. so i charge it again just to see it boot to system and shows 80% battery.. i tried to charge it to 100%, but at 100%, the phone suddenly died, again..
at first i thought it might be a battery problem, or power circuit thingy, but here's the catch, it can hold for 30 mins + on bootloader mode..
can someone tell me what is wrong with my phone?
Click to expand...
Click to collapse
Flash Stock ROM or any Other ROM and report back

Rub My Donger :'v said:
Flash Stock ROM or any Other ROM and report back
Click to expand...
Click to collapse
downloading the stock ROM atm, will report once it's done

Rub My Donger :'v said:
Flash Stock ROM or any Other ROM and report back
Click to expand...
Click to collapse
flashed Stock ROM, still happening

chlova said:
flashed Stock ROM, still happening
Click to expand...
Click to collapse
in what way u are flashing the stock rom??
try flashing with QPST if u had pc..
then ur phone will start like a factory product..
if u have pc search in YouTube for qpst method..
that method can solve

Rwepradeep said:
in what way u are flashing the stock rom??
try flashing with QPST if u had pc..
then ur phone will start like a factory product..
if u have pc search in YouTube for qpst method..
that method can solve
Click to expand...
Click to collapse
okay so i did the qpst thing, it can hold on at download mode until it finished, then after that the phone reboots, and it happened again...
i don't get this phone, it works well on bootloader and download mode, but not so long at recovery.. not to mention i can't even boot into system (can't even past the boot logo lol)

Okay so, i took it to Lenovo Service Center, they told me something wrong with the battery, apparently it hold up on bootloader because the bootloader mode didn't took so much power, so even a broken battery should hold up a little.. Changed the battery, now it works well, thanks for all the help..

Axon 7 can't boot, stuck on update screen then shuts down

So, I downloaded the A2017G B08 from this thread onto my SD card and went into the settings to update. All was fine until the phone got to the update screen and to 25% on the progress bar. Then the screen turned off, along with the phone. If I try to boot it, it's the same story. I see the ZTE screen, get to the update progress bar but it gets stuck on 25% and turns off. Kind of like a manual boot loop.
The phone isn't rooted or anything, I was downgrading to marshmallow to try and fix mic issues I was having earlier but never expected this.
Please help.
Thanks.

*deleted*

vesheljinn said:
So, I downloaded the A2017G B08 from this thread onto my SD card and went into the settings to update. All was fine until the phone got to the update screen and to 25% on the progress bar. Then the screen turned off, along with the phone. If I try to boot it, it's the same story. I see the ZTE screen, get to the update progress bar but it gets stuck on 25% and turns off. Kind of like a manual boot loop.
The phone isn't rooted or anything, I was downgrading to marshmallow to try and fix mic issues I was having earlier but never expected this.
Please help.
Thanks.
Click to expand...
Click to collapse
Ouch. We can try stuff but I never read anything like this here.
First try to access the recovery directly. I think it's Volume up and power, but if you get into FTM mode just try with volume down. If you can, then download B10 from the download center (it's weird that we have everything there and nobody uses it, it's frickin stickied on the Guides section for God's sake) or Nougat B04 and try to install it from an SD card.
If it doesn't work you have two ways to go: if the bootloader is unlocked, install TWRP via Controllerboy's guide (using axon7tool, it works every time)
OR
put your phone on EDL mode (Connect the USB cable to the PC, then hold both Volume buttons (NOT POWER) and insert the cable on the phone, and use MiFlash to get a working B10 on your phone. (there's a B10 package on 4pda)
If you choose the TWRP way you can install MiFavor 5.0 and be done with it. Or maybe a custom ROM, but if you didn't have any problem staying stock as it seems that you did, then you'll probably not like custom ROMs and their bugs

This is what I thougth as well. But his link only refers to B08 in MM. So he didn't want to install B08 on Nougat. As his bootloader is still locked he cannot install this ROM in no way.

Choose an username... said:
Ouch. We can try stuff but I never read anything like this here.
First try to access the recovery directly. I think it's Volume up and power, but if you get into FTM mode just try with volume down. If you can, then download B10 from the download center (it's weird that we have everything there and nobody uses it, it's frickin stickied on the Guides section for God's sake) or Nougat B04 and try to install it from an SD card.
If it doesn't work you have two ways to go: if the bootloader is unlocked, install TWRP via Controllerboy's guide (using axon7tool, it works every time)
OR
put your phone on EDL mode (Connect the USB cable to the PC, then hold both Volume buttons (NOT POWER) and insert the cable on the phone, and use MiFlash to get a working B10 on your phone. (there's a B10 package on 4pda)
If you choose the TWRP way you can install MiFavor 5.0 and be done with it. Or maybe a custom ROM, but if you didn't have any problem staying stock as it seems that you did, then you'll probably not like custom ROMs and their bugs
Click to expand...
Click to collapse
Hey, thanks for the response.
I downloaded MiFlash and got a working B10 but when I went to reboot the phone the screen wouldn't turn on, just the red LED was on. If I tried to go into recovery mode the phone vibrates and the LED flashes but it goes back to the same state. Also if I connect it to the PC and try and enter EDL mode there are sounds from windows that a USB device is being connected but that's it. MiFlash can't recognise the phone.

vesheljinn said:
Hey, thanks for the response.
I downloaded MiFlash and got a working B10 but when I went to reboot the phone the screen wouldn't turn on, just the red LED was on. If I tried to go into recovery mode the phone vibrates and the LED flashes but it goes back to the same state. Also if I connect it to the PC and try and enter EDL mode there are sounds from windows that a USB device is being connected but that's it. MiFlash can't recognise the phone.
Click to expand...
Click to collapse
I just had this issue, I plugged the phone into the orginal charger and for a legit 60sec held volume up and power button it will eventually power on .

jjallday said:
I just had this issue, I plugged the phone into the orginal charger and for a legit 60sec held volume up and power button it will eventually power on .
Click to expand...
Click to collapse
Did that for ~2 minutes, still nothing. Forgot to mention, when I connect it to the PC I get Handset Diagnostic Interface as a connected device.

vesheljinn said:
Did that for ~2 minutes, still nothing. Forgot to mention, when I connect it to the PC I get Handset Diagnostic Interface as a connected device.
Click to expand...
Click to collapse
hmm well idk i had this problem earlier today, even when i had mine connected to the pc the pc would make a noise as if the phone was turning on, but when i connected to the actual charger is when the 60sec thing actually worked , also i noticed that when i finally got it on the battery was down to 1% maybe some sort of battery issue. maybe let it set on the actual wall charger for awhile and try again.

vesheljinn said:
Did that for ~2 minutes, still nothing. Forgot to mention, when I connect it to the PC I get Handset Diagnostic Interface as a connected device.
Click to expand...
Click to collapse
Do the 4th category brick repair guide. Yes,you have to tear apart the phone, but I did this and didn't break it idk
No USB jigs or weird cables will work, you need to use the test pad to get into EDL.
There is another way though: it seems that if you discharge the phone completely, then hold vol down and power, and try a bunch of times, you might be able to get into FTM mode. You'll have adb from there, so you can do 'adb reboot edl' and use MiFlash to fix the software. But I haven't tried

P9 lite stuck at "Your device booting now screen..."cant enter fastboot

Hi!
So i treid to install the twpr recovery via srk tool huawei
after i unlocked the bootloader and reboot the phone i got the ÿour device is booting now screen and i cant do anything
i tried to restart the phone then press the vol down + the usb cable and doesnt work i still get the same screen
can't acces erecovery, can't enter fastboot, i can't do anything
what do i do now?

Nickoll_no1 said:
Hi!
So i treid to install the twpr recovery via srk tool huawei
after i unlocked the bootloader and reboot the phone i got the ÿour device is booting now screen and i cant do anything
i tried to restart the phone then press the vol down + the usb cable and doesnt work i still get the same screen
can't acces erecovery, can't enter fastboot, i can't do anything
what do i do now?
Click to expand...
Click to collapse
Device stuck in device is booting now ? or the 3 option screen ?

Kcetin20 said:
Device stuck in device is booting now ? or the 3 option screen ?
Click to expand...
Click to collapse
The device is stuck in the "device is booting now':crying:

Same Problem...
Nickoll_no1 said:
The device is stuck in the "device is booting now':crying:
Click to expand...
Click to collapse
BLN-L24N - Honor 6x
Sooo, I have the same problem , here's my story. Please help I've resorted to using a SGH-T599N... Its embarrassing... I'd almost rather have an iPhone...
So Little ol' me was messing around/ deleted google play services/ reboot to twrp to recover but device ended up bricked. At the time, still able to access fastboot. I flashed recovery and firmware. I then tried dload roll back method and when it cleared the phone bootloader locked. So I unlocked bootloader again but when device re-booted the following screen came up and still remains:
" ' Your device has been unlocked and cant be trusted. ' -- ' Your device is booting now... ' " (No options are available.)
I eventually tried to restart to fastboot or erecovery BUT Everytime I try to power down the device, it tries to power up again but needs to charge for a minute before trying to boot itself back up. .(even after being on the charger for hours this happens). The problem with that is I can't get into fastboot or force dload because it automatically starts itself/ has to be plugged in until it turns back on. (Yes i've tried button mashing/ button holding/ etc. did not help)
How do I get the phone to charge, without it booting up? I have a feeling that if I can get it to start (without it first having to charge) I can get it to fastboot/ or erecovery. I have already tried to let the battery COMPLETELY drain.
Outside of that, I know the whole roll back and dload stuff. Currently it flashes the honor logo screen and then sits at "Your device is booting now..."
Bootloader is unlocked
OH! I should clarify, it boots on its own. I've tried disconnecting the battery, having it on the charger without the
battery. With the battery, Starting phone up by re-connecting the battery. No positive results
I'm about to start messing around with firmware flashing utilities, I just don't know of any. I wish there was a way to flash without being in fastboot mode. (I know very little of perl/python/linux, but I am a quick learner if you point me in the right direction.
Thank you in advance

MSDB714 said:
BLN-L24N - Honor 6x
Sooo, I have the same problem , here's my story. Please help I've resorted to using a SGH-T599N... Its embarrassing... I'd almost rather have an iPhone...
So Little ol' me was messing around/ deleted google play services/ reboot to twrp to recover but device ended up bricked. At the time, still able to access fastboot. I flashed recovery and firmware. I then tried dload roll back method and when it cleared the phone bootloader locked. So I unlocked bootloader again but when device re-booted the following screen came up and still remains:
" ' Your device has been unlocked and cant be trusted. ' -- ' Your device is booting now... ' " (No options are available.)
I eventually tried to restart to fastboot or erecovery BUT Everytime I try to power down the device, it tries to power up again but needs to charge for a minute before trying to boot itself back up. .(even after being on the charger for hours this happens). The problem with that is I can't get into fastboot or force dload because it automatically starts itself/ has to be plugged in until it turns back on. (Yes i've tried button mashing/ button holding/ etc. did not help)
How do I get the phone to charge, without it booting up? I have a feeling that if I can get it to start (without it first having to charge) I can get it to fastboot/ or erecovery. I have already tried to let the battery COMPLETELY drain.
Outside of that, I know the whole roll back and dload stuff. Currently it flashes the honor logo screen and then sits at "Your device is booting now..."
Bootloader is unlocked
OH! I should clarify, it boots on its own. I've tried disconnecting the battery, having it on the charger without the
battery. With the battery, Starting phone up by re-connecting the battery. No positive results
I'm about to start messing around with firmware flashing utilities, I just don't know of any. I wish there was a way to flash without being in fastboot mode. (I know very little of perl/python/linux, but I am a quick learner if you point me in the right direction.
Thank you in advance
Click to expand...
Click to collapse
So on ny phobe the mainboard is dead so i guess the internal storage is corrupted
I need to change that and i guess you need too...
It's not so expensive(like 40$ for my phone)

Nickoll_no1 said:
So on ny phobe the mainboard is dead so i guess the internal storage is corrupted
I need to change that and i guess you need too...
It's not so expensive(like 40$ for my phone)
Click to expand...
Click to collapse
do you have a part number?

MSDB714 said:
do you have a part number?
Click to expand...
Click to collapse
I dont think i was to a local service...it' s not so expensive but it's not cheap either