Hey guys ,
I tried to enter download mode today to revert to stock after flashing PA 3.99
but i get a black screen saying
"fastboot: processing commands"
Any ideas how to use kdz again?
Thanks:laugh:
Switch device off
Hold down volume - key
Connect usb cable
If dont work, try using volume + key or both volume keys
Enviado desde mi LG-E612g usando Tapatalk 2
switch off your phone first
next press the vol+ and vol- key together (hold in etween the two)
power on ur mobile phone ..
a yellowish screen should appear saying EMERGENCY MODE...:good:
raul338 said:
Switch device off
Hold down volume - key
Connect usb cable
If dont work, try using volume + key or both volume keys
Enviado desde mi LG-E612g usando Tapatalk 2
Click to expand...
Click to collapse
drkingtech said:
switch off your phone first
next press the vol+ and vol- key together (hold in etween the two)
power on ur mobile phone ..
a yellowish screen should appear saying EMERGENCY MODE...:good:
Click to expand...
Click to collapse
Tried both of them but I get fast boot rocessing commands in a black screen
P.s -i have an e612
Have you tried this
http://forum.xda-developers.com/showthread.php?t=1131671
should work..!
drkingtech said:
Have you tried this
http://forum.xda-developers.com/showthread.php?t=1131671
should work..!
Click to expand...
Click to collapse
I had seen that but its for a different device
Edit:it only shows how to flash a recovery
my recovery is intact and completely functional i dont know where the hell my download mode is ?!
Sent from my LG-E610 using Tapatalk 4
I tried to flash TWRP by using one of the apps and suddenly my phone opens to zuk logo and closes
and it did not stop I tried soft/hard reset did not work I manage to stop this by holding power key and volume down
but if I press the power key it again open and close. Help please
can any one help
try to enter recovery mode by pressing power+volume up and volume down
Sent from my Z1 using XDA-Developers mobile app
I tried but nothing changed I think mine is bricked can u help me
uae_ad said:
I tried but nothing changed I think mine is bricked can u help me
Click to expand...
Click to collapse
I am facing similar issue, did your issue get fixed?
It's used to working. But right now not any more and I don't have any clue.
It's can enter TWRP via adb and everything work like normal.
But when I using combination key to do this. It's just struck there at mi logo for hours if I let it.
I can enter fastboot normally.
Please help
Vermillion_PT.2 said:
It's used to working. But right now not any more and I don't have any clue.
It's can enter TWRP via adb and everything work like normal.
But when I using combination key to do this. It's just struck there at mi logo for hours if I let it.
I can enter fastboot normally.
Please help
Click to expand...
Click to collapse
Try to power off your phone and press volver+, vol- and power at the same time until mi logo appears. Then release allí buttons
Enviado desde mi Redmi 4 mediante Tapatalk
Dang! I don't know why. But it's worked!!! Thanks man!!!!
Hi
i bought before 2 weeks Xiaomi a1
it wored very good.
Today while I wanted to turn on the screen it did not respond.
The phone is not responding to any type of pressing.
I must say that the phone is new, did not get any kind of hit , and 5 min before this problem it used to work really good.
I think that the phone is in brick mode, and i can't enter to fastboot option because the phone is not responding....
Pls help my solve this problem.
Thanks
Try holding the pwoer button for more then 10 seconds, that should reset it... once you start it up aghain turn of ambient screen... Gave me troubles too... Hope that helps.
Has that still not been fixed with November update? I turned my ambient screen back on to see. So far, 2 days since update and no black screen after notification.
I'm guessing it's not dead. I have the same problem before as well. It was the buggy Ambient Display. Force restart your phone by pressing power button and holding it more than 10 second. First thing on boot up complete, go to Settings > Display and turn off Ambient Display.
micleftic said:
Try holding the pwoer button for more then 10 seconds, that should reset it... once you start it up aghain turn of ambient screen... Gave me troubles too... Hope that helps.
Click to expand...
Click to collapse
I cant even turn on the screen...
It's not showing any thing on the screen.
I tried to push the power but there is no respond
myself379 said:
I'm guessing it's not dead. I have the same problem before as well. It was the buggy Ambient Display. Force restart your phone by pressing power button and holding it more than 10 second. First thing on boot up complete, go to Settings > Display and turn off Ambient Display.
Click to expand...
Click to collapse
I tried forcing it. But it is still show black screen.
I think it is in brick mode
roy123456 said:
I tried forcing it. But it is still show black screen.
I think it is in brick mode
Click to expand...
Click to collapse
Just go in fastboot mode and reflash the firmware from MIUI.con
jack_21 said:
Just go in fastboot mode and reflash the firmware from MIUI.con
Click to expand...
Click to collapse
How can I enter the fastboot mode?
I cant even turn it on.
It is not respoding.
I tried to put it on this mode but the screen is still black.
roy123456 said:
How can I enter the fastboot mode?
I cant even turn it on.
It is not respoding.
I tried to put it on this mode but the screen is still black.
Click to expand...
Click to collapse
You must keep pressed vol down + power until the phone does show "FASTBOOT"
jack_21 said:
You must keep pressed vol down + power until the phone does show "FASTBOOT"
Click to expand...
Click to collapse
How long?
I tried it for 3 min ...
Is it enough?
roy123456 said:
How long?
I tried it for 3 min ...
Is it enough?
Click to expand...
Click to collapse
Well there is something strange.
Leave the phone discharge
Then let it charge
Then power on with vol down + power
Try these 2 things
1) charge your phone for 2-3 hours. if didnt switch on try this 2
2) Connect your data cable with pc. In mobile Press volume up + volume down and plug in the other end of usb cable to your mobile. you need to hold the keys. this will boot your phone into fastboot.
If boot steps didnt work then it might be a hardware problem or hard brick.
selvarajrajkanna said:
Try these 2 things
1) charge your phone for 2-3 hours. if didnt switch on try this 2
2) Connect your data cable with pc. In mobile Press volume up + volume down and plug in the other end of usb cable to your mobile. you need to hold the keys. this will boot your phone into fastboot.
If boot steps didnt work then it might be a hardware problem or hard brick.
Click to expand...
Click to collapse
What can I do if it is a hard brick?
roy123456 said:
What can I do if it is a hard brick?
Click to expand...
Click to collapse
Visit customer care(they will probably say motherboard problem as always) or try qfil method which is quite complex if this flashing things are new to you.
roy123456 said:
How long?
I tried it for 3 min ...
Is it enough?
Click to expand...
Click to collapse
you should press the power key while charging cable connected.If it doesn't work , unplug the charging usb and plug again reverse(type c's reversibility).If it can't, try with another AC source,another person,another location.
My A1 reborn by my gf's charging adaptor,hand and location.(she know nothing about android hard key combination)
Just thinking,don't know exactly.Sorry for my english.
My was hang.. so I restarted it.. but aftr tht.. phone is not turning on.. its just showing anroid one.. and nothhing else
ruhi maallivk said:
My was hang.. so I restarted it.. but aftr tht.. phone is not turning on.. its just showing anroid one.. and nothhing else
Click to expand...
Click to collapse
reflash phone with stock firmware in fastboot mode on MI FLASH TOOL
selvarajrajkanna said:
Try these 2 things
1) charge your phone for 2-3 hours. if didnt switch on try this 2
2) Connect your data cable with pc. In mobile Press volume up + volume down and plug in the other end of usb cable to your mobile. you need to hold the keys. this will boot your phone into fastboot.
If boot steps didnt work then it might be a hardware problem or hard brick.
Click to expand...
Click to collapse
I need help on urgent basis
I'm using Mi A1 rooted with custom kernel, My phone automatically received august update and it's installed automatically then i try to go in download mode to flash my phone with stock rom but i didn't press volume button properly and it's get restart and automatically start installing august update and i by mistake press power button and now my phone is not turning on even not responding
when i try to connect my phone with pc i can hear the connect sound but it's not going in fast boot
Shivam.S said:
I need help on urgent basis
I'm using Mi A1 rooted with custom kernel, My phone automatically received august update and it's installed automatically then i try to go in download mode to flash my phone with stock rom but i didn't press volume button properly and it's get restart and automatically start installing august update and i by mistake press power button and now my phone is not turning on even not responding
when i try to connect my phone with pc i can hear the connect sound but it's not going in fast boot
Click to expand...
Click to collapse
You switched off the phone in middle of installing ota, best bet is take it to the take it to the service center and tell them phone not switching back on after installing August ota update.
Or if not in warranty then try to install stock rom using qfil.
Unfortunately you have bricked your Mi A1
Shivam.S said:
I need help on urgent basis
I'm using Mi A1 rooted with custom kernel, My phone automatically received august update and it's installed automatically then i try to go in download mode to flash my phone with stock rom but i didn't press volume button properly and it's get restart and automatically start installing august update and i by mistake press power button and now my phone is not turning on even not responding
when i try to connect my phone with pc i can hear the connect sound but it's not going in fast boot
Click to expand...
Click to collapse
You have bricked your Mi A1, when you turned it off while installing/flashing the August update. Basically you should never turn a smartphone off, or disconnect the USB cable (if it is connected), while flashing its ROM.
There are various methods to unbrick it, I suggest you try this one since it's apparently not going into fast boot:
[Experimental]Recover Hard Bricked Xiaomi A1 Using SD Card
My phone is being stuck at Mi logo while installing stock ROM . I can't access fastboot/recovery with keys. The device boots and stuck at Mi logo and fastboot/recovery doesn't show up . I already tried those methods and didn't worked .
Try to Press all 3 button(vol up+down+power) overthan 1 min
Hold the volume (both +&-) and power key when you see the mi logo. Then as soon as the screen goes off just release the power button while holding the volume keys.
Please help me finding a solution.
shuvo_king said:
My phone is being stuck at Mi logo while installing stock ROM . I can't access fastboot/recovery with keys. The device boots and stuck at Mi logo and fastboot/recovery doesn't show up . I already tried those methods and didn't worked .
Try to Press all 3 button(vol up+down+power) overthan 1 min
Hold the volume (both +&-) and power key when you see the mi logo. Then as soon as the screen goes off just release the power button while holding the volume keys.
Please help me finding a solution.
Click to expand...
Click to collapse
Is the device shown in Windows device manager?
Can you reach the device by ADB/Fastboot?
Wolfcity said:
Is the device shown in Windows device manager?
Can you reach the device by ADB/Fastboot?
Click to expand...
Click to collapse
no it doesn't even show up in "windows device manager" not showing on adb/fastboot too...
shuvo_king said:
no it doesn't even show up in "windows device manager" not showing on adb/fastboot too...
Click to expand...
Click to collapse
Are you sure you've installed the right firmware? How did you install it? Only thing that comes to my mind would be Mi Tool 2 if you haven't tried it.
Wolfcity said:
Are you sure you've installed the right firmware? How did you install it? Only thing that comes to my mind would be Mi Tool 2 if you haven't tried it.
Click to expand...
Click to collapse
mi tool 2 works only if its in fastboot mode.... I cant even get that far yet... just bootloop over and over again