Related
Hello,
anybody else got a problem with TV OUT ?
I cannot make it work. And when entering the Service/Test Mode, it won't work there either! Its setting is OFF.
In comManager its all greyed out, no matter if connected with a cable to a tv or not.
There is a reg setting about it and when I enable it there, it shows enabled, but it actually is NOT.
So I am wondering if this is perhaps MY hardware or if there is any 'secret' to it, to make it work.
Thanks!
Everybody's elses TV OUT working fine???
Hey what is this, no replies at all. Should I believe EVERYBODIES TV OUT is working fine?
Or nobody using that at all? I want to know if with all you out there, the TVout in connection manager is greyed out or not (with or without a plug).
Even in service/test mode my setting is OFF and cannot be changed.
Need to know if this is just mine and the hardware is perhaps broken. Thanks!
Mine works.
(I used it very rarely but it's good to know it there)
MS Direct Push not working either?!?!
Good to know at least somebody's works! If you go to connection manager, the TV screen is greyed out on mine, on yours its yellow?
And what about the square where you put the ckeckmark, its greyed on mine, on yours not?
Now, what is your software version?
Thanks
michaelthemage said:
Good to know at least somebody's works! If you go to connection manager, the TV screen is greyed out on mine, on yours its yellow?
And what about the square where you put the ckeckmark, its greyed on mine, on yours not?
Now, what is your software version?
Thanks
Click to expand...
Click to collapse
When the cable is not connected, the TV out checkbox in Connection Manager is greyed out. The moment I connect the cable to both phone and TV, a menu pops up and shows a picture and two aspect ratio options to choose from.
Are you sure it's not the cable or the input on the TV faulty? I mean it is clear for me the TV out option is available only after a connection between phone and a valid input of a working TV has been established. Dunno, try other tv sets?
My phone software is plain 6.5.3 generic UK. only mods are sd card fix and overclocking, so very little to do with the matter we are discussing.
Yeah, I tried different TVs. But since it won't even work in TestMenu, I figure it my hardware now.
You see, in testmenu, one does not even need to connect a TV because it will be displayed on the lcd. And no cable needed either.
What is your manufacture date? Its inside battery compartment on white sticker, like 09Wxx or 10Wxx.
Mine says 09W48
michaelthemage said:
Yeah, I tried different TVs. But since it won't even work in TestMenu, I figure it my hardware now.
You see, in testmenu, one does not even need to connect a TV because it will be displayed on the lcd. And no cable needed either.
What is your manufacture date? Its inside battery compartment on white sticker, like 09Wxx or 10Wxx.
Click to expand...
Click to collapse
I'm too facing the same problem..
It identifies the cable as a headset.
Anything to do...?
vignesh8910 said:
I'm too facing the same problem..
It identifies the cable as a headset.
Anything to do...?
Click to expand...
Click to collapse
1. plug your TV OUT cable into your tv
2. plug your TV OUT cable (jack 3.5 mm interface) into your x2
it seems work to me
(sorry for my bad english)
Hi all, fortunately I have my motorola Atrix but I have a problem when playing videos by hdmi to TV, connect the phone and it started the implementation of video on TV but nothing comes out, it is as if not detected, know if I have to do something special on the phone to work this out??
Thanks and regards
Do you select the webtop or media setting once you plug it in? If so, and you aren't getting anything, then your unit might be defective.
Sent from my Nexus One using XDA Premium App
hello I am Spanish and do not quite understand what I say, I connect my phone to the TV by HDMI and then open the rocketplayer by example and not play anything on TV.
I've seen people talking about playing with the entertaiment center hd but can not find how to start that application. I've seen that in managing applications is a size 0.0B, may be why?
Where I can get this application??
Thanks and regards.
josete_chaco said:
hello I am Spanish and do not quite understand what I say, I connect my phone to the TV by HDMI and then open the rocketplayer by example and not play anything on TV.
I've seen people talking about playing with the entertaiment center hd but can not find how to start that application. I've seen that in managing applications is a size 0.0B, may be why?
Where I can get this application??
Thanks and regards.
Click to expand...
Click to collapse
When you plug in the HDMI cable, a pop-up should appear on the phone asking to start the HD Entertainment Center. That's the only way to get video-out onto the TV. If this isn't popping up and you haven't done anything to modify your phone software, then your device my have a problem.
ok thanks for the help, the only modification I've done is to make the root software, nothing else has that something to do?
I have only tested on a old TV, I'll try another to see if that is the problem, my TV is the first that came with hdmi at best can that be right?
Greetings
My Atrix had something wrong with it's HDMI, I had to return it and get a new one. When I plugged it in to a TV the phone would act properly (the pop-up menu would appear, and the controls would be present when the media center was selected) but I wouldn't see anything but snow on my TV. I also tried a HDMI computer monitor to the same effect. I lastly went to the ATT store and tried a dock, same problem.
Interesting to know that it was more than just mine.
Oh, mine was stock, not rooted yet.
-Tom
Hi all, ultimately the problem is not the phone, I tested a friend's TV and it works perfectly, when you connect me jump hd window center and all good, so I have a problem with my TV.
If someone happens just as well try it on another TV in case.
Thanks for the tips and greetings.
OK so out of the box this thing looks great, packaging included.
Setting it up was straight forward. HDMI to my 55" LG 240hz. Just had to dig out a spare cat5 and pop it in. Batteries in the CTRLR, dongle in the USB 2.0 port. Phone clip stashed for future use. Brought power to the MOJO and sparked it up, and just as I feared... uh.. wait.. actually it started up flawlessly, audio and video came over lovely with a beautiful smooth boot.
So far so good.
Next I used the CTRLR to perform the basic setup. TIP #1 (use mouse and keyboard for this). I didn't have an issue just took more time than it had too putting in a bunch of text via point and click. Even so, no problem to sync my google account and arrange the normal "phone" settings.
So far so good, and it doesn't even hiccup.
Apps and such, I need to navigate the new feeling of the mouse mode and android interface. TIP #2 (took a bit to understand how the left stick acts like the mouse and the A button acts like your finger pressing, so to swipe you press A then swipe stick! also when navigating screens use the right stick to scroll up and down as long as you have the curser over the section you want to scroll) I click on the MadCatz logo (claw marks), its the orientation app, follow it step by step. works like a dream, and thanks for adding that it gave me a great start. TIP #3 (follow all of the suggested actions in the slideshow). This will help you get basic apps that make the functionality of the MOJO start to feel like a workable system.
So far so good,
I want to test the sound and graphics, so I load up Dead Trigger 2 (you'll be able to DL it inside of the presentation) and man it looks sweet! I'm really impressed that this lil box can pump out those shaders and reflections at that resolution without straining.. I'm not a console FPS guy but have to say it looked great... TIP #4 (switch your CTRLR mode button from mouse mode to the right PC mode to be able to interact in Dead Trigger)
So far so good, but but but....
I want to get some apps, specifically apps that I bought the MOJO for as my media center (among other things). So you'll soon find you cannot DL most apps as the developers haven't added MOJO as a supported device, so you wont even have an option to try it out. This will not do as I am not going to wait for them to add support to get to enjoy this thing.
TIP #5 downloading and side loading apps till you can ROOT and modify the ro. to act like a supported device to fake out the app store (till they get off their ass and support this thing).
1. On your pc go to the android market and find the app you want, copy the address bar.
2. go to (im new to the forum so they wont let me show the url, but just look up APK-Downloader from evozi) paste the google play URL into the text box and click the "generate dl link" button.
3. It will save the app package as a .zip file, you will need to change the file extension from .zip to .apk and save it on a USB flash drive.
4. Pop the USB flash drive into the USB 3.0 port of your MOJO
5. Go to the security settings in the MOJO and uncheck the restriction on installing apps that are from unknown sources.
6. Open up ES File Manager app (if you followed TIP #3 this will be installed already) and find Local on the left, click that, then scroll down to USB, and click that.
7. Find the file you DL and saved as .apk and click it. It will install (everything I installed this way works perfectly, I can only speak from my experience but so far no duds, THOUGH I HAD A FAIL ON AN APP I DID NOT PURCHASE *still working on how to buy an app to gain access without being able to have that option to purchase on the market place, I think I will have to root and change my device description to a supported device but all of these steps are to avoid having to root for now*)
After this now I sit back and enjoy, I just wanted to help out anyone else that might be new to the MOJO.
So far so good, I have all the apps I bought the MOJO for and woohoo! Thanks for this MadCatz. I'm impressed. Now I just need to send some emails to the developers to update their apps.
-XexisKhan
oh and..
Almost forgot! NVIDIA TEGRAZONE has tons of compatible apps/games for this thing that look awesome, for those of you were are waiting for content to consider the MOJO... it's here!
-XexisKhan
@XexisKhan
Very helpful, thank you
gwaldo said:
@XexisKhan
Very helpful, thank you
Click to expand...
Click to collapse
Hey my pleasure.
As I progress there are a few more things I have found.
I just purchased two keyboards to test out: (note: I would have tried out MADCATZ gamesmart stuff if they were available in store but it was an impulse decision)
I bought a HP Bluetooth keyboard K4000
Pros - only 29.99, no need for dongle with Bluetooth, super small, has power button so you can turn your MOJO off and on (never thought I would get excited about something like that but hey) and feels sturdy. Can also use the FN keys to turn off the MOJO and handle all the multimedia stuff, lovely.
Cons - Will need a mouse or separate touch pad, or will have to use the CTRLR in conjunction, not horrible but..
Also I picked up a Logitech Wireless All-In-One Keyboard tk820
Pros - It has a touch pad built in but not a ghetto one, it's real slick on the right side nice and big, stylish, heavy enough that when you have it on your lap and you use the touch pad it doesn't slide off. For most activities you wont need anything else since you can track with touch pad and type with keyboard. Can also use the FN keys to turn off the MOJO and handle all the multimedia stuff, lovely.
Cons - It is pricey at BestBuy 69.99. You will have to use up a USB slot for the dongle (Logitech unified devices). The touch pad doesn't work for the real interactive games, only the basic ones. Touch pad doesn't quit feel like you are working on the surface of a phone/screen.. would be cool.
Lastly I have plugged in several mice and all have worked well, but I tested my first straight BLUETOOTH mouse.
the Logitech Ultrathin Touch Mouse t630
Connected and functions as designed.. very slim blue tooth no dongle needed.
For ****s n gigs I plugged in my Razer Nostromo, it appears to function fine. hmm need further testing.
Turns out the CTRLR needs the dongle for MOJO but not other BLUETOOTH devices... interesting.
Gonna keep them all for a bit and test em out further. Do not see a compatibility issue with any input devices as of yet.
What's apps did u side load?
@XexisKhan thanks again
RE keyboards, did all keys map correctly?
My BT mini keyboard with mouse touch pad works for alph-numeric keys but I notice the android virtual keyboard keeps coming up and I can't use the backspace nor enter keys, strange becuase it works fine in windows and linux.
My FN keys don't turn off my mojo lol
gwaldo said:
@XexisKhan thanks again
RE keyboards, did all keys map correctly?
My BT mini keyboard with mouse touch pad works for alph-numeric keys but I notice the android virtual keyboard keeps coming up and I can't use the backspace nor enter keys, strange becuase it works fine in windows and linux.
My FN keys don't turn off my mojo lol
Click to expand...
Click to collapse
The issue there (from what I experienced) is that the on-screen keyboard is set to default. Set your BT keyboard as the default and you won't have the other pop up. As soon as you disconnect the BT, the on-screen goes back to default.
ExtremeRyno said:
The issue there (from what I experienced) is that the on-screen keyboard is set to default. Set your BT keyboard as the default and you won't have the other pop up. As soon as you disconnect the BT, the on-screen goes back to default.
Click to expand...
Click to collapse
Thanks for the reply, I turned everything off in langauges but it still shows, not sure where to se the default keyboard.. my tablet running 4.0.4 has the same settings and does it automatically.
The keyboard mapping works just by escaping out of the virtual keyboard, so that's good enough for me
edit: @XexisKhan
Thanks, I'll look into External Keyboard Helper Pro.
XexisKhan said:
Hey my pleasure.
As I progress there are a few more things I have found.
I just purchased two keyboards to test out: (note: I would have tried out MADCATZ gamesmart stuff if they were available in store but it was an impulse decision)
I bought a HP Bluetooth keyboard K4000
Pros - only 29.99, no need for dongle with Bluetooth, super small, has power button so you can turn your MOJO off and on (never thought I would get excited about something like that but hey) and feels sturdy. Can also use the FN keys to turn off the MOJO and handle all the multimedia stuff, lovely.
Cons - Will need a mouse or separate touch pad, or will have to use the CTRLR in conjunction, not horrible but..
Also I picked up a Logitech Wireless All-In-One Keyboard tk820
Pros - It has a touch pad built in but not a ghetto one, it's real slick on the right side nice and big, stylish, heavy enough that when you have it on your lap and you use the touch pad it doesn't slide off. For most activities you wont need anything else since you can track with touch pad and type with keyboard. Can also use the FN keys to turn off the MOJO and handle all the multimedia stuff, lovely.
Cons - It is pricey at BestBuy 69.99. You will have to use up a USB slot for the dongle (Logitech unified devices). The touch pad doesn't work for the real interactive games, only the basic ones. Touch pad doesn't quit feel like you are working on the surface of a phone/screen.. would be cool.
Lastly I have plugged in several mice and all have worked well, but I tested my first straight BLUETOOTH mouse.
the Logitech Ultrathin Touch Mouse t630
Connected and functions as designed.. very slim blue tooth no dongle needed.
For ****s n gigs I plugged in my Razer Nostromo, it appears to function fine. hmm need further testing.
Turns out the CTRLR needs the dongle for MOJO but not other BLUETOOTH devices... interesting.
Gonna keep them all for a bit and test em out further. Do not see a compatibility issue with any input devices as of yet.
Click to expand...
Click to collapse
I am using a Logitech K270 - it seems that the mapping is not completely compatable with MOJO. I can only assume that MOJO is looking for an Android keyboard and/or driver... Am I right? Pls how is the Razor gamepad working? Does all the function keys work, can you reassign the keys ok ? ~Andy aka Two_Wolf~
PS anyone may anwser if you pls
ajelliottjr said:
I am using a Logitech K270 - it seems that the mapping is not completely compatable with MOJO. I can only assume that MOJO is looking for an Android keyboard and/or driver... Am I right? Pls how is the Razor gamepad working? Does all the function keys work, can you reassign the keys ok ? ~Andy aka Two_Wolf~
PS anyone may anwser if you pls
Click to expand...
Click to collapse
Stock mojo works with BT2 (needing the USB dongle), CM12 newer BT Smart (no dongle required)
I have no idea what other gamepads use but if it's BT it will pair to mojo
I plan to buy Mojo these days, there is an offer in my country (Greece) for 89€
1. Anyone knows what's the latest official version of Mojo? I can't find anything on internet about that. Its still 4.2???
2. I will be able to run 1080p on Kodi without probs? I saw also an update that came out on June 2014 that promised 4k capabilities, is that also available?
3. Anyone knows if Football Manager 2016 Touch is supported for Mojo? It says that it run in Nvidia Shield, that i assume its the same thing, just to be sure.
I post here, as it seemed more related to start a new thread, if its not np i can start a new thread - ty in advance
Its still 4.2???
Click to expand...
Click to collapse
Think so. Someone recently posted that they received word from the folks at Mad Catz stating they stopped working on the project. Never tried Kodi on it, but I know for a fact you can use 1080p.
Ended up selling my MOJO just a over month ago though. It had such a huge potential
AndroidSupaFan said:
Think so. Someone recently posted that they received word from the folks at Mad Catz stating they stopped working on the project. Never tried Kodi on it, but I know for a fact you can use 1080p.
Ended up selling my MOJO just a over month ago though. It had such a huge potential
Click to expand...
Click to collapse
I have sent also a ticket to Mad Catz with the same question, i will respond back when i will have news. But in the meantime, i can't understand why people abandon this device. It plays 1080p movies and 4K (so Kodi is used at its best here), and also you take a awesome controller which can be used with games in the tv. Ok not anything spectacular (we have pc for that) but some nice games at least. Also you take a traveler clip where you can have your smartphone on the controller and the specs of mojo itself, if there is a capable rom creator, let you have new version of Android in the future easily.
Its very sad that i see that very few people are using the device and making roms. I bought it for 70 euro and i believe its better than most rk media players out there.
Hi does it run apps like 4od I player itvplayer demand five amazon video etc? Because some apps will be available to download but won't work with the controller. Can you plug a mouse and keyboard in to play the games that don't work on the controller?
iMarcs said:
Hi does it run apps like 4od I player itvplayer demand five amazon video etc? Because some apps will be available to download but won't work with the controller. Can you plug a mouse and keyboard in to play the games that don't work on the controller?
Click to expand...
Click to collapse
Hey, you can plug a mouse but with the controller itself it has an integrated mouse "mode" that behave like a mouse so it's not so needed. If you please tell me exact what apps you are looking for, and i will test them later today to report back.
---------- Post added at 10:23 AM ---------- Previous post was at 10:22 AM ----------
For me, the main problem is that 4.2.2 doesn't have so much compatibility with the apps in playstore. (even if i manage to spoof the device). It would be nice to have at least Lollipop
iMarcs said:
Hi does it run apps like 4od I player itvplayer demand five amazon video etc? Because some apps will be available to download but won't work with the controller. Can you plug a mouse and keyboard in to play the games that don't work on the controller?
Click to expand...
Click to collapse
Nah, it doesn't support Amazon video, primary reason why I sold it.
Well, rumors first spread Mad Catz was bringing new update and support Android TV.... As of now, nothing!
The controller is great, hardware is great, no doubt about it. But the lack of future official updates makes it another unused sitting console next to the TV. If something happens, I will probably buy it again (and I made a profit selling it though!).
lanc3lot said:
Hey, you can plug a mouse but with the controller itself it has an integrated mouse "mode" that behave like a mouse so it's not so needed. If you please tell me exact what apps you are looking for, and i will test them later today to report back.
---------- Post added at 10:23 AM ---------- Previous post was at 10:22 AM ----------
For me, the main problem is that 4.2.2 doesn't have so much compatibility with the apps in playstore. (even if i manage to spoof the device). It would be nice to have at least Lollipop
Click to expand...
Click to collapse
Thabks for your help. I'm looking to get all the media streaming apps, 8ball multiplayer and call if duty zombies ect
Netflix works, as Cod Zombies
Okay,
I have another TV box which has 5.1.1 I loaded full android 5.1 onto my new Shield TV pro the problem is that the same wireless mini keypad touchpad that I use on the other 5.1.1 box buttons do different things here on SHield TV now or don't work at all, I have 2 different USB wireless mini Keyboard touch pads now on my other TV box (MXIII-G) while using the touchpad it has a button for left click and a button for right click, the right click also works as the back button....which is awesome works really well and its what I am use to, now on Shield with 5.1 the left mouse click works fine its clicks left but the right mouse botton for some reason is working as a left mouse click also...and it is like this on both of my USB mini wireless keyboard touchpads they are both different models but on Shield TV 5.1 both mouse buttons only work as a left mouse click can someone please help me fix this or tell me if its possible to get 5.1.1 on Shield TV ? Thank you sorry if this is confusing if you have any questions ask again thanks...I have tried everything I can think of and I am stumped..
I really like this device.. especially when combined with ps4 remote play...
I got no problem using DS4 controller wired to shield.. but it's wired...
the problem is everytime i play ps4 using shield/any other controller it turns the right analog into mouse.. so I it's really hard to press R3 button.. and hate the mouse cursor keeps moving...
Is it possible to turn off the right analog as mouse? Or any other trick so i can use my nvidia shield/360 controller to play ps4 remote play?
Thanks in advance
I have the modded remote play with the invisible touch buttons. I attach the DS4 pad to the SHIELD with an OTG adapter on the micro USB port. The pads works perfect and there are no visual cues on the screen (i.e Cursor)
The adapters are very cheap and you'll find other uses for it I am sure. Hope this helps
He's referring to the nvidia shield, which recently updated and added "right thumb stick as mouse" for non TV apps. So when you try to look around it shoes a mouse, and the thumb stick doesn't work as intended. I'm having the same issue and wondering if anyone has found a workaround or way to disable it too.
Jacobxtyler said:
He's referring to the nvidia shield, which recently updated and added "right thumb stick as mouse" for non TV apps. So when you try to look around it shoes a mouse, and the thumb stick doesn't work as intended. I'm having the same issue and wondering if anyone has found a workaround or way to disable it too.
Click to expand...
Click to collapse
I'm not a mind reader lol This section is for the SHIELD TV which uses the Android TV OS (it's not the same as what the tablet or portable uses). Perhaps posting or looking in that section will get you guys an answer sooner...I wish you all the best with it.
honosuseri said:
I'm not a mind reader lol This section is for the SHIELD TV which uses the Android TV OS (it's not the same as what the tablet or portable uses). Perhaps posting or looking in that section will get you guys an answer sooner...I wish you all the best with it.
Click to expand...
Click to collapse
Sorry I didn't see the last part that said "ie cursor" and saw the "otg adapter" and assumed you were talking about the shield portable devices. I too was referring to the Shield TV and just misrepresented it.
I used the XDA port with invisible touch buttons as well, but still get a cursor popup when trying to use the right thumbstick. If i'm not mistake, it's a feature added in the newest update to the Shield TV for non-tv apps to help navigate them better. I'm also unable to use the PS button or touchpad, but I just assumed it wasn't possible.
Jacobxtyler said:
Sorry I didn't see the last part that said "ie cursor" and saw the "otg adapter" and assumed you were talking about the shield portable devices. I too was referring to the Shield TV and just misrepresented it.
I used the XDA port with invisible touch buttons as well, but still get a cursor popup when trying to use the right thumbstick. If i'm not mistake, it's a feature added in the newest update to the Shield TV for non-tv apps to help navigate them better. I'm also unable to use the PS button or touchpad, but I just assumed it wasn't possible.
Click to expand...
Click to collapse
Well I feel like a putz. I didn't even realize there was a micro USB on the back, or that it would function differently than the USB ports. Using an OTG cable like stated above does work, and there is no mouse prompts when using the right stick! Thank you @honosuseri
Jacobxtyler said:
Well I feel like a putz. I didn't even realize there was a micro USB on the back, or that it would function differently than the USB ports. Using an OTG cable like stated above does work, and there is no mouse prompts when using the right stick! Thank you @honosuseri
Click to expand...
Click to collapse
Sorry for the confusion, I thought you were personally having problems with the SHIELD Portable with the built in pad. I was definitely talking about the SHIELD TV as you now know.
I have a USB HDD connected (adopted as internal storage) and had a USB receiver in the other port for a keyboard and mouse...that only left the Micro USB port available for the DS4, so I gave the OTG a go! Didn't take long to notice it worked far better than when in the standard USB 3 port. Happy to have helped
so there's no solution for this in shield android tv.. that's a pitty...