My Droid X just stopped working one day. I believe it is due to a failed OTA update.
Either way, the phone is unresponsive. When I plug the phone into my computer via USB the green LED light comes on. However, pressing the power button does not do anything. I have tried to put it into recovery mode, and flash mode, but to no avail.
Any suggestions on how to repair this phone?
Is there a way I can wire the USB cable into my serial port and force a reflash using an SBF to repair the bootloader?
Sd shadow put together an excellent list of links.
https://docs.google.com/document/d/1Goawxdx_UBF4Y8lqzHYWf8Ha3yUcRK4faq0UWIlXLWA/mobilebasic?pli=1
Its been a long time for me but sounds like you have hard bricked.
So you csnnot get into recovery at all?
sent from my T.A.R.T.I.S
(Time And Relative Tarts In Space)
Unfortunately, I can't get no response from it except the green LED.
When I first plug it in to the computer sometimes my computer will quickly pick it up and then a second later it disappears as a USB device.
The screen nor does the backlight come on.
When I press and hold the power button the green LED will go off and not come back on until the battery is popped out, and then put back in.
Do anyone know where I can find information about the jtag points on the phone, and then at that point flash it?
Hope this helps ya.
http://www.powerbookmedic.com/manual.php?id=152
sent from my T.A.R.T.I.S
(Time And Relative Tarts In Space)
sounds like
1. battery is dead
2. software/ firmware is corrupt, and will not charge battery
solution
1. get a Battery Charger for Motorola Droid X or a TBH’s Motorola Factory Cable Adaptor
2. flash sbf with rsd lite or ezSBF
Guys, my brother's Moto G4 Plus is dead, it fell from a height and stopped working.
When I plug a wall charger, the led blinks but nothing else happens. Same thing happens when I connect it to a pc/laptop but it doesn't get detected.
I've tried everything from my end, please help.
Blankflash
deepak21 said:
Guys, my brother's Moto G4 Plus is dead, it fell from a height and stopped working.
When I plug a wall charger, the led blinks but nothing else happens. Same thing happens when I connect it to a pc/laptop but it doesn't get detected.
I've tried everything from my end, please help.
Click to expand...
Click to collapse
I guess it's due to physical damage get it checked out in the Moto store or a local repair shop
Sent from my Moto G4 Plus using Tapatalk
magdeoz said:
Blankflash
Click to expand...
Click to collapse
Cannot do that as it is not detected by a PC/laptop.
BlackBeats said:
I guess it's due to physical damage get it checked out in the Moto store or a local repair shop
Sent from my Moto G4 Plus using Tapatalk
Click to expand...
Click to collapse
Yeah, I think that's the only option now.
Hey i have exactly the Same on my Motorola G4 Plus (ressuruction Remix). My Handy crashed to floor.After i charged Handy i see it blinked every second and Handy Screen was black.
I tryed pressing long Power button and volume together and nothing happend.Screen was Black and only led blinking if i pluged in USB or charger.
Then i tryed with ADB (adb devices and adb reboot).But ADB didnt find a device.(it also was not detected in Windows)
So i found on Lenovo Forum that there is an solution.
You must Press Power Button and Volume down for 2-3 Minutes and Hold them. ( Handy must be connected to the charger !!! )
This means more then 120 Seconds.Then your handy will boot to Recovery.
then navigate to "start" in recovery with volume buttons and hit "power button" that it starts normally.
Try this please it helped me....and say us if it worked for you !
this solutions helps if android gets freezed .I first tough also my handy was death.But it worked for me.
But remember it must be connected to charger and press more then 120 seconds and hold !!!This will work on all Motorola Handys with Android.
https://motorola-global-en-roe.custhelp.com/app/answers/indevice_detail/a_id/99826/p/30,6720,9151 <-- read notes
Hello!!
Yesterday,i was occupying my motog4+ (facebook app) and notice a small freeze, the next thing that happens is that it is turned off and no longer responds, not even when connecting it to the charger, even my computer isn't detected my motog, and no recovery mode.
had half the load capacity, bootloader is unlocked and updated to the June security patch.
Thanks!!
Try holding the power button and volume down button for 2 minutes and see if the bootloader screen appears.
reCoded said:
Try holding the power button and volume down button for 2 minutes and see if the bootloader screen appears.
Click to expand...
Click to collapse
Nothing dude, when i put to charge, the notification led doesn't work, only black screen.
try this : https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-hardbrick-solved-guide-t3657761
siddhesh9146 said:
try this : https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-hardbrick-solved-guide-t3657761
Click to expand...
Click to collapse
thank you a lot,but my pc (windows7) doesn't recognize my motog as a qualcommloader .
also, when i connect the phone to turbo charge power the led doesn't blink.
its my device really dead?
its my device really dead?
Most probably, cause i had moto g3 in same condition as yours and hasn't started till date..[emoji22] [emoji22]
ThaRandomAndroid said:
thank you a lot,but my pc (windows7) doesn't recognize my motog as a qualcommloader .
also, when i connect the phone to turbo charge power the led doesn't blink.
its my device really dead?
Click to expand...
Click to collapse
just connect your phone to PC and reinstall the drivers on PC... your PC just needs to detect the USB! and then use blank flash as per the link provided! if it gets stuck at waiting for the device, hold the power and vol down for like 5-10 sec...It will work.. i have done it and was able to boot my phone! the only difference is that i was on windows 10! Hope it works!
This is my first time posting here so hi everyone.
I have a problem with my moto g5+.
I purcased my moto g5+ around a year a go completely new and ended up not using it.
Now my primary device broke down and i thought its time to switch only one problem.
It won't turn on.
When I connect charger white led will consistantly blink but nothing else happens no battery charging screen , nothing.
It wasn't compleatly discharged since I charged it up till 100% and turned it off when I puted it away , i still did charge it a couple times during the year of not using it and last time was a month ago and it charged just fine.
No water or Physical Damage has been done to the phone no rooting also , it just wont turn on.
I tried hard reseting it , tried to hold power button for 5 min tried to enter boot loader to access recovery mode with no luck.
I used original charger and cable that came with phone to charge it.
Since warranty is out of the way by this point because i bought it in july im seeking a fix or recommendation here.
All help will be appreciated
ridestos said:
This is my first time posting here so hi everyone.
I have a problem with my moto g5+.
I purcased my moto g5+ around a year a go completely new and ended up not using it.
Now my primary device broke down and i thought its time to switch only one problem.
It won't turn on.
When I connect charger white led will consistantly blink but nothing else happens no battery charging screen , nothing.
It wasn't compleatly discharged since I charged it up till 100% and turned it off when I puted it away , i still did charge it a couple times during the year of not using it and last time was a month ago and it charged just fine.
No water or Physical Damage has been done to the phone no rooting also , it just wont turn on.
I tried hard reseting it , tried to hold power button for 5 min tried to enter boot loader to access recovery mode with no luck.
I used original charger and cable that came with phone to charge it.
Since warranty is out of the way by this point because i bought it in july im seeking a fix or recommendation here.
All help will be appreciated
Click to expand...
Click to collapse
It seems your device had hard bricked, you can recover it by using the blank flash file.
Here is the procedure:-
https://forum.xda-developers.com/g5-plus/help/moto-g5-plus-hard-bricked-recognized-t3636457
But, I don't understand how you are device got hard bricked as you need to downgrade or root it to get your device bricked. But you can recover it by above link.
riyan65 said:
It seems your device had hard bricked, you can recover it by using the blank flash file.
Here is the procedure:-
https://forum.xda-developers.com/g5-plus/help/moto-g5-plus-hard-bricked-recognized-t3636457
But, I don't understand how you are device got hard bricked as you need to downgrade or root it to get your device bricked. But you can recover it by above link.
Click to expand...
Click to collapse
thanks for the reply gonna try it today, I don't really understand my self how did i hard brick it but gonna try you're solution.
riyan65 said:
It seems your device had hard bricked, you can recover it by using the blank flash file.
Here is the procedure:-
https://forum.xda-developers.com/g5-plus/help/moto-g5-plus-hard-bricked-recognized-t3636457
But, I don't understand how you are device got hard bricked as you need to downgrade or root it to get your device bricked. But you can recover it by above link.
Click to expand...
Click to collapse
Tried doing this methode but my pc wont reconize the device as connected , when i connected it to the pc it showed lightning symbol like charging , i left it to charge for 2h but still nothing.
In order to use blankflash successfully your PC needs to be in test mode. To do this
Code:
Click Start, and then type cmd in the Search box.
Under Programs, right-click cmd.exe, and then click Run as administrator.
At the command prompt, type the following text, and then press Enter: bcdedit /set TESTSIGNING OFF.
Close the Command Prompt window, and then restart your computer
When you plug in phone, look at device manager, ports, and see that it is connected. It should say something like "Qualcomm HS- USB Diagnostics " with a port "Comm 7" or whatever #.
1.Be sure Qualcomm drivers are installed.
2.Make sure your Hard Bricked Moto is connected in device manager under ports .
3.Hold volume down and power until you see it connect under ports. It should say "qhsusb-bulk" You should hear a slight sound from PC when it connects. This can be very tricky as another member [ Rakesh1b] explained his method.
trick is to press and hold the power button then it disconnects and connects to pc u could hear sound from pc then press voldown and power and launch blankflash.bat at the same time i mean same time then it detects and leave the buttons once you see the script running if not it will reboot the device and after running the script it will be booted to fastboot mode . if u failed 1st time repeat same power off then remaing things same as mentioned.
Click to expand...
Click to collapse
[email protected] said:
In order to use blankflash successfully your PC needs to be in test mode. To do this
Code:
Click Start, and then type cmd in the Search box.
Under Programs, right-click cmd.exe, and then click Run as administrator.
At the command prompt, type the following text, and then press Enter: bcdedit /set TESTSIGNING OFF.
Close the Command Prompt window, and then restart your computer
When you plug in phone, look at device manager, ports, and see that it is connected. It should say something like "Qualcomm HS- USB Diagnostics " with a port "Comm 7" or whatever #.
1.Be sure Qualcomm drivers are installed.
2.Make sure your Hard Bricked Moto is connected in device manager under ports .
3.Hold volume down and power until you see it connect under ports. It should say "qhsusb-bulk" You should hear a slight sound from PC when it connects. This can be very tricky as another member [ Rakesh1b] explained his method.
Click to expand...
Click to collapse
Thanks for heads up gonna try to do it again tomorrow I hope this will work and I will be able to get my new phone runing tomorrow since I really need that phone .
ridestos said:
Thanks for heads up gonna try to do it again tomorrow I hope this will work and I will be able to get my new phone runing tomorrow since I really need that phone .
Click to expand...
Click to collapse
Good luck, as it is not an easy process. One time it took me nearly half an hour to time it right, to get blankflash to run successfully. Also I played with a phone that would never flash Vaches blankflash for the G5 + but had to use the one for addison, Moto Z play. When that happens you have to do the extra step of flashing the addison to potter files. Hopefully you won't have to do all that, but just warning that sometimes it is necessary. Like I posted before, in device manager on PC, make sure under ports it shows as qhsusb-bulk under the port it lists as. Also be sure you have adb/fastboot and all its drivers correctly installed. I am really curious as to how it got hard bricked, because even doing my test phone, it is difficult to hard brick it. I have this "test phone" that has a bad microphone, so I have run it through all kinds of crap, rather than jeopardise my every day phone.
ridestos said:
This is my first time posting here so hi everyone.
I have a problem with my moto g5+.
I purcased my moto g5+ around a year a go completely new and ended up not using it.
Now my primary device broke down and i thought its time to switch only one problem.
It won't turn on.
When I connect charger white led will consistantly blink but nothing else happens no battery charging screen , nothing.
It wasn't compleatly discharged since I charged it up till 100% and turned it off when I puted it away , i still did charge it a couple times during the year of not using it and last time was a month ago and it charged just fine.
No water or Physical Damage has been done to the phone no rooting also , it just wont turn on.
I tried hard reseting it , tried to hold power button for 5 min tried to enter boot loader to access recovery mode with no luck.
I used original charger and cable that came with phone to charge it.
Since warranty is out of the way by this point because i bought it in july im seeking a fix or recommendation here.
All help will be appreciated
Click to expand...
Click to collapse
If your phone was in oreo, you maybe want to try the addison (moto z play) blankflash, i once bricked mine and the potter blankflash always failed.
Also try the USB 2.0 ports, as the 3.0 ones doesn't recognizes it.
Put it on the charger and let it charge. IT could just be deader than disco.
Also check your cable make sure it's a data cable buddy.
pwag said:
Put it on the charger and let it charge. IT could just be deader than disco.
Also check your cable make sure it's a data cable buddy.
Click to expand...
Click to collapse
Already tried that didn't work. And I'm using included cable that came with g5+
red002 said:
If your phone was in oreo, you maybe want to try the addison (moto z play) blankflash, i once bricked mine and the potter blankflash always failed.
Also try the USB 2.0 ports, as the 3.0 ones doesn't recognizes it.
Click to expand...
Click to collapse
Well good news is , that i manged to get it to show up as the device with which i should be able to do blank flash.
The problem now is it won't stay in bootloader to be recognized as that device longer than 30 sec.
It just turns off after some time and pc automaticly wont recognize it anymore.
[email protected] said:
Good luck, as it is not an easy process. One time it took me nearly half an hour to time it right, to get blankflash to run successfully. Also I played with a phone that would never flash Vaches blankflash for the G5 + but had to use the one for addison, Moto Z play. When that happens you have to do the extra step of flashing the addison to potter files. Hopefully you won't have to do all that, but just warning that sometimes it is necessary. Like I posted before, in device manager on PC, make sure under ports it shows as qhsusb-bulk under the port it lists as. Also be sure you have adb/fastboot and all its drivers correctly installed. I am really curious as to how it got hard bricked, because even doing my test phone, it is difficult to hard brick it. I have this "test phone" that has a bad microphone, so I have run it through all kinds of crap, rather than jeopardise my every day phone.
Click to expand...
Click to collapse
Well managed to get it to point where my pc recognized phone as device buuut another thing came up. It only is recognized for max 30sec after witch phone gets disconected from pc. Any way to fix that? Or mby im doing something wrong here? I'm starting to consider battery replacment which i dont want to do because it awful to replace battery on this thing.
What is it recognised as? Battery replacement may save you from having to go through the blankflash process if the device will not stay on while plugged in. Only use blankflash if it shows as qhsusb-bulk.
[email protected] said:
What is it recognised as? Battery replacement may save you from having to go through the blankflash process if the device will not stay on while plugged in. Only use blankflash if it shows as qhsusb-bulk.
Click to expand...
Click to collapse
yes it showed up like that but like I said it wont stay on. I remembered one time when I got it to work this month. I was able to boot in to android , factory reset it but the problem was as soon i pluged in the charger phone went from 44% up to 89% in 2 sec then droped to 14% and then to 0 and turned off. I was able to turn it on again after that , it showed 44% like before the charger was connected then I tried to charge it while it was off and since then I haven't been able to go past booting screen since it just turns off after like 30sec on boot screen.
Mby i should just buy a new battery and see if that will fix it.
ridestos said:
yes it showed up like that but like I said it wont stay on. I remembered one time when I got it to work this month. I was able to boot in to android , factory reset it but the problem was as soon i pluged in the charger phone went from 44% up to 89% in 2 sec then droped to 14% and then to 0 and turned off. I was able to turn it on again after that , it showed 44% like before the charger was connected then I tried to charge it while it was off and since then I haven't been able to go past booting screen since it just turns off after like 30sec on boot screen.
Mby i should just buy a new battery and see if that will fix it.
Click to expand...
Click to collapse
I would recommend that or to take it to a service center. Using the blankflash method could brick the device forever (if it's just a battery/display problem), also you will have to live with another devices bootloader and resulting problems from that.
Wolfcity said:
I would recommend that or to take it to a service center. Using the blankflash method could brick the device forever (if it's just a battery/display problem), also you will have to live with another devices bootloader and resulting problems from that.
Click to expand...
Click to collapse
Well service center is out of the way since closest one to me is like 200km away . I should be able to replace it my self so no problems there. I just hope that maybe replacing the battery will fix everything since the phone is practicly brand new and it would be painful and expensive if it's not a battery problem but like motherboards or smth like that.
ridestos said:
Well good news is , that i manged to get it to show up as the device with which i should be able to do blank flash.
The problem now is it won't stay in bootloader to be recognized as that device longer than 30 sec.
It just turns off after some time and pc automaticly wont recognize it anymore.
Click to expand...
Click to collapse
Reboot your pc, and connect the phone to the wall charger for about 10 minutes, then try again the blankflash, and when it's done just play around with the volume up/down buttons just to keep the bootloader on, and use the g5+ toolkit to flash the oreo stock firmware
in any case, this is the blankflash i used it
https://www.mediafire.com/file/hw7hs4vve51c1qh/blankflash.zip/file
Led Light Blinking
ridestos said:
Well good news is , that i manged to get it to show up as the device with which i should be able to do blank flash.
The problem now is it won't stay in bootloader to be recognized as that device longer than 30 sec.
It just turns off after some time and pc automaticly wont recognize it anymore.
Click to expand...
Click to collapse
How did you managed to show it up as a device , i couldn't. I tried everything that i understood from written on these forums, installed qualcomm drivers , moto g5 plus drivers. The device doesn't show up in device manager, its just blinking and doesn't show anything else , i tried charging it overnight. The Led light does go away after a while when i put it o charging, but when i hold down the power button and volume down key it starts blinking again and nothing beyond that
Rather Suhail said:
How did you managed to show it up as a device , i couldn't. I tried everything that i understood from written on these forums, installed qualcomm drivers , moto g5 plus drivers. The device doesn't show up in device manager, its just blinking and doesn't show anything else , i tried charging it overnight. The Led light does go away after a while when i put it o charging, but when i hold down the power button and volume down key it starts blinking again and nothing beyond that
Click to expand...
Click to collapse
Well for me it works like this , i leave it for about 12h (over night) untouched , then after that I can put it on charger and get in bootloader with holding down power button and vol down button at the same time. I have seen some other people that have revived their phones like this usualy they say to just leave it for 24h but for me it works after 12h. if u can get in to the bootloader
after those hours and the phone doesn't turn off (like mine) I would suggest that u leave it for charging in bootloader for atleast 2h and then try to power it on in factory mode thats how I got it to work one time. I hope this will help you.
ridestos said:
Well for me it works like this , i leave it for about 12h (over night) untouched , then after that I can put it on charger and get in bootloader with holding down power button and vol down button at the same time. I have seen some other people that have revived their phones like this usualy they say to just leave it for 24h but for me it works after 12h. if u can get in to the bootloader
after those hours and the phone doesn't turn off (like mine) I would suggest that u leave it for charging in bootloader for atleast 2h and then try to power it on in factory mode thats how I got it to work one time. I hope this will help you.
Click to expand...
Click to collapse
Thanks for replying.
A few points to clear with 12 hours untouched ,do you mean i have to left phone as it is without even charging and if so after 12 hours for how much time do you charge it before getting it to bootloader and did you charge it with the moto turbo charge or just a regular charger or with computer.