Related
So I bought a galaxy s4 for sprint. I called to check the esn meid number sprint said it was clean and also checked it on swappa it also said it was clean. So I bought the phone. When I received it I tried activating it on my account dialing star 2 and talking to a rep. I give them the dec number and they said it can't be activateD???????? They said the " ID number is not compatible with this brand"? But it still has clean esn. The rep said it might of been flashed to use on a different carrier. S I've done research for 24 hours straight to to figure out this problem all I want is the phone activated on my sprint account. I going to talk to a guy about flashing the phone back to sprint, wanted to ask first to save the money maybe. So I've seen some similar post about flashing back but none with the same issue i have. What I've tired is CDMA tool, qpst and dfs but can't get the phone to respond when I click read. I've noticed today that I have the samsung drivers installed but not the Samsung diagnostic drivers, idk if that would make a difference but I'm going to try. Also I've noticed the network under the settings of the phone says samsung instead of sprint. The dec and hex number on the sticker under battery do match the ones under settings. The phone was rooted when I received it I completely put stock rom back on using Odin. But trying qpst and dfs I believe it has to be rooted to read ? Correct me if I'm wrong, so I re rooted the phone but it still didn't work or do anything. Idk what to do anymore any advice would be greatly appreciated I just want to activate this phone on my sprint account
Update: first of all I want to say thank you all for giving me advice on what to do. But I tried every single one and nothing seems to do what I want it to do sprint still says I can't activate it. Now with there stupid choice on just being able to activate the phone online instead of calling in is the stupidest thing sprint can do. They already suck with service. So about the sprint bootup logo I never see it maybe cause its unable to be activated, I don't know I tried putting the stock firmware on it still nothing. I tried calling boost to see if they could flash it back to sprint for me but they said they don't even have the phone in there system it's still sprints phone. Also I want to try to go to a sprint store but since the phone isn't activated on my account, without insurance I don't see what they could do for
It sounds like either a demo device for display purposes only or possibly a flashed esn.
If the esn was flashed it would show in the system as a different device.
Sent from my SPH-L720 using xda app-developers app
supercholo said:
It sounds like either a demo device for display purposes only or possibly a flashed esn.
If the esn was flashed it would show in the system as a different device.
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
Is there Any way to flash the esn back to sprint?
Gatorsare1 said:
Is there Any way to flash the esn back to sprint?
Click to expand...
Click to collapse
Try activating it online since it says Samsung as the network it should work on sprint same happened to me.
Sent from my GT-I9505G using XDA Premium 4 mobile app
Had the same thing happen to me a week ago on a different phone. The Sprint rep started a ticket to have them check on the phone's Dec and hex. They said on a rare occasion there will be an error and it can be fixed if it is truly a Sprint branded phone. Does it boot up with the Sprint logo?
I had this happen with my Optimus G that I got off eBay. I'm pretty sure that it had been flashed to a different carrier, so they couldn't activate it even though the ESN was technically clean. The Sprint phone rep told me that they "opened a ticket" on it, and a few days later I was able to activate it. I have no idea what they did internally to get it to work though.
EDIT: I take that back. It was my Evo 3D, not the Optimus G. I've had too many damn phones
Sent from my SPH-L720 using XDA Premium 4 mobile app
All u have to do is this is like a clean reset and it should fix the issue.. ##72786# type thar in the keypad.. Ur phone will restart after that and be working ok... Let me know if it helps.. Thanks...
Sent from my SPH-L720 using xda premium
Another possibility is the sim card is missing or from a different phone. Are you getting any signal at all when you power up the phone? If there's no signal then you might have a bad or missing card. From what I've gathered, sims between sprint LTE phones are not interchangeable. The card is matched with that specific phone. Swapping sims between same model phones won't work either. If this is the case then you need to call around to repair centers or corporate stores and repair centers to ask if they have sim cards for galaxy s4. Depends on where you go and who you talk to but it can be free or they can charge you.
w7excursion said:
Had the same thing happen to me a week ago on a different phone. The Sprint rep started a ticket to have them check on the phone's Dec and hex. They said on a rare occasion there will be an error and it can be fixed if it is truly a Sprint branded phone. Does it boot up with the Sprint logo?
Click to expand...
Click to collapse
No it doesn't boot up with sprint logo but it is a truly branded sprint phone the sticker in the back the prl number
It won't bootup to with the sprint logo until it is activated. If they flashed it to another carrier then that was removed. When you open up a brand new phone on first boot you won't get the Sprint logo until the phone fully boots and activates then it installs the Sprint specific files. What you should do is download the full mf9 tar file and install it with odin to make sure the phone has the correct radio and modem files installed for sprint network, then do the ##72786# entry in the dialer to factory reset the phone and activation status. Then try to activate the phone with Sprint.
cruise350 said:
It won't bootup to with the sprint logo until it is activated. If they flashed it to another carrier then that was removed. When you open up a brand new phone on first boot you won't get the Sprint logo until the phone fully boots and activates then it installs the Sprint specific files. What you should do is download the full mf9 tar file and install it with odin to make sure the phone has the correct radio and modem files installed for sprint network, then do the ##72786# entry in the dialer to factory reset the phone and activation status. Then try to activate the phone with Sprint.
Click to expand...
Click to collapse
what radio files are there???? and how do i find out if it does have the right radio files
I do know that the PRL file is sprints PRL
I also do believe the MRL code is sprints also because ive read that if it was flashed to metro pcs or cricket the MRL code would be 000000
cruise350 said:
It won't bootup to with the sprint logo until it is activated. If they flashed it to another carrier then that was removed. When you open up a brand new phone on first boot you won't get the Sprint logo until the phone fully boots and activates then it installs the Sprint specific files. What you should do is download the full mf9 tar file and install it with odin to make sure the phone has the correct radio and modem files installed for sprint network, then do the ##72786# entry in the dialer to factory reset the phone and activation status. Then try to activate the phone with Sprint.
Click to expand...
Click to collapse
Lol it always boots up with the Sprint logo before activating.
Perfect solution... go to ebay and pay $70ish to get it flashed to prepaid (straight talk) on verizon towers. You have no limitation on mods and flashing roms. However you will lose 4g.
w7excursion said:
Lol it always boots up with the Sprint logo before activating.
Click to expand...
Click to collapse
Actually, when brand new out of the box and first boot it will boot with the Samsung logo and during the first turn on the Sprint customization are added like all the sprint bloatware and boot animation. The second boot will then have the sprint boot. So if someone flashed it to a different carrier it wouldn't have the boot animation.
cruise350 said:
Actually, when brand new out of the box and first boot it will boot with the Samsung logo and during the first turn on the Sprint customization are added like all the sprint bloatware and boot animation. The second boot will then have the sprint boot. So if someone flashed it to a different carrier it wouldn't have the boot animation.
Click to expand...
Click to collapse
Sprint S4's always come with the boot animation out the box, whether or not its been flashed, when you flash a custom rom that is only when you lose sprints boot animation. Nothing is loaded afterward, All L720's come with sprint firmware, as I337 comes with AT&T firmware and so on and so forth.
You can just pay someone to repair the IMEI and MEID and reload a local Sprint PRL so it can be activated on sprint, I just did one yesterday for someone who had the same issue, $75 and they brought a cracked up galaxy s4 from sprint with a clean ESN as the donor.
Hello all,
I want to switch to Verizon but I don't have a verizon sim to test my phone, I just got it unlocked through the unlock app. I've also read this post,
https://forum.xda-developers.com/tm...izon-galaxy-s7-edge-t-mobile-network-t3399618
but there is no confirmation if he found a solution.
any feed back would help.
Well i live in Mexico, but i own a galaxy s7 edge from tmobile and to try nougat i installed first the Verizon version, and it work well, the only issue was to setting the data configuration, now i use the At&t nougat and everything still even more perfect (the verizon nougat have a lot of little bugs)
bounddyy said:
Hello all,
I want to switch to Verizon but I don't have a verizon sim to test my phone, I just got it unlocked through the unlock app. I've also read this post,
https://forum.xda-developers.com/tm...izon-galaxy-s7-edge-t-mobile-network-t3399618
but there is no confirmation if he found a solution.
any feed back would help.
Click to expand...
Click to collapse
Using a Tmobile S7 Edge going to Verizon won't work cause of a few reasons.
1. TMOBILE S7 and S7 edge are not built for CDMA networks that uses certain bands and network. Along with the security of CDMA networks.
2. There is no band 13 on tmobiles S7 and S7 Edge. Even you were to unlock it.
But going from CDMA to GSM most phones work due most of the hardware and software is already built in the phone.
Sent from my SM-G935T using XDA-Developers Legacy app
I can confirm this. Yes, your unlocked T-mobile S7/Edge will work with Verizon network if you flash the U firmware. I'm currently using my unlocked T-mobile S7 Edge with the U-firmware on the Verizon network. Voice, text, data work fine. No issues for me.
bounddyy said:
Hello all,
I want to switch to Verizon but I don't have a verizon sim to test my phone, I just got it unlocked through the unlock app. I've also read this post,
https://forum.xda-developers.com/tm...izon-galaxy-s7-edge-t-mobile-network-t3399618
but there is no confirmation if he found a solution.
any feed back would help.
Click to expand...
Click to collapse
You can flash the stock Tmobile ROM or the U firmware. The only reason I got a new S7 when I jumped from big red was I had a huge scratch on my screen. I was running the U firmware when I went into tmobile and used the girls sim card from her phone to prove I could do it...
Sent from my SM-G935T using XDA Premium HD app
Don't know but I am on T-Mobile and I use alot from Verizon thread no issues so far
OK, so I have a question. I'm also trying to move from t-mobile to Verizon but I'm trying to keep my same phone. My phone is already paid off and i currently running t-mobile's SM-G935U over SM-G935T. But a couple of days ago i asked a friend to let me barrow his verizon sim card to test it out. But received a message saying "Invalid sim Card" "network locked SIM card inserted." Did i messed up something during the installation of the SM-G935U?
edgtv said:
OK, so I have a question. I'm also trying to move from t-mobile to Verizon but I'm trying to keep my same phone. My phone is already paid off and i currently running t-mobile's SM-G935U over SM-G935T. But a couple of days ago i asked a friend to let me barrow his verizon sim card to test it out. But received a message saying "Invalid sim Card" "network locked SIM card inserted." Did i messed up something during the installation of the SM-G935U?
Click to expand...
Click to collapse
You need to UNLOCK your phone. It might be a Tmobile phone and running G935U software...but the sim is still locked to T-Mobile. Here is Tmobile unlock page information. you can request unlock in the T-mobile app or by calling T-Mobile....then it should see the Verizon sim and load up just fine once the phone itself is not locked to T-Mobile only sims. https://support.t-mobile.com/docs/DOC-1588
And for anyone else looking at this forum, There is no physical difference in hardware from a SM-G935T phone and a SM-G935U phone. Samsung actually made the hardware the same for all US Variants it is just the software that is different. And not that you would want too but you could load other carriers software on your phone if you wanted too(IE- running Verizon software on a SM-G935T, or ATT or SM-G935U (Stock Samsung Software) The only problem Running SM-G935U is they haven't upgraded the unlocked us phones to 7.0 yet. Where T-Mobile and other carriers already have nougat out.
The SM-G935U software however has all the US and even some Chinese LTE bandwidths enabled, and it also enabled the CDMA bandwidths to be used on the SM-G935 phones...hence why it will work with Verizon, Sprint, and even US Cellular if you can get them to put it on the account.*(I haven't dealt with US Cellular in years and with the new laws on moving phones from carrier to carrier in the US they might not have any issue with Bring your own phone to US Cellular anymore I do not know!)
lubu81 said:
I can confirm this. Yes, your unlocked T-mobile S7/Edge will work with Verizon network if you flash the U firmware. I'm currently using my unlocked T-mobile S7 Edge with the U-firmware on the Verizon network. Voice, text, data work fine. No issues for me.
Click to expand...
Click to collapse
lubu81 is there a step by step process to unlock and setup/flash/install phone completely to be able to use with Verizon?
cchavez136 said:
lubu81 is there a step by step process to unlock and setup/flash/install phone completely to be able to use with Verizon?
Click to expand...
Click to collapse
Had you flash any ROM before via Odin?. If so, you will only need to download the verizon firmware (sammobile.com) and flash those files. if not > Open odin (Attached) load all the files accordingly (AP, BL, CP, CSC) in ODIN> put your phone download mode ( pressing fingerprint button + volume down + power) > connect phone to PC > Once all files are ready in ODIN hit start. You will get the success message and phone will boot.
Mr. Clown said:
Had you flash any ROM before via Odin?. If so, you will only need to download the verizon firmware (sammobile.com) and flash those files. if not > Open odin (Attached) load all the files accordingly (AP, BL, CP, CSC) in ODIN> put your phone download mode ( pressing fingerprint button + volume down + power) > connect phone to PC > Once all files are ready in ODIN hit start. You will get the success message and phone will boot.
Click to expand...
Click to collapse
Thank you so much,. when i try to load i get the below message
OSM all threads completed (succeed 0/failed 0)
cchavez136 said:
Thank you so much,. when i try to load i get the below message
OSM all threads completed (succeed 0/failed 0)
Click to expand...
Click to collapse
Exit completely ODIN (make sure you run it as administrator), repeat the process and make sure all files are uploaded (AP takes a long time to upload) make sure to use the CSC file label as HOME_CSC. Try to flash again.
Mr. Clown said:
Exit completely ODIN (make sure you run it as administrator), repeat the process and make sure all files are uploaded (AP takes a long time to upload) make sure to use the CSC file label as HOME_CSC. Try to flash again.
Click to expand...
Click to collapse
Does the phone have to be unlocked before adding these files or does it matter?
cchavez136 said:
Does the phone have to be unlocked before adding these files or does it matter?
Click to expand...
Click to collapse
If you are going to use a verizon sim, you will need to have it unlocked. Firmware flash won't sim unlock/lock the phone.
Mr. Clown said:
Exit completely ODIN (make sure you run it as administrator), repeat the process and make sure all files are uploaded (AP takes a long time to upload) make sure to use the CSC file label as HOME_CSC. Try to flash again.
Click to expand...
Click to collapse
i flashed the rom. afterwards i got an error message with a dead android. after about 5 min it takes me to android recover menu with a log in white that shows a lot of E: failed messages. what do i do now?
unknownsupervillain said:
i flashed the rom. afterwards i got an error message with a dead android. after about 5 min it takes me to android recover menu with a log in white that shows a lot of E: failed messages. what do i do now?
Click to expand...
Click to collapse
Ok, which ROM did you flash and what version of android you previously had in your phone?
Mr. Clown said:
Ok, which ROM did you flash and what version of android you previously had in your phone?
Click to expand...
Click to collapse
Thanks for the quick reply. I thought I was gonna be waiting months. I got it tho. The home csc file wasn't working so I used the other one that reset the phone to stock. It was g935u firmware for tracfone from T-Mobile if that helps anyone in the future.
unknownsupervillain said:
Thanks for the quick reply. I thought I was gonna be waiting months. I got it tho. The home csc file wasn't working so I used the other one that reset the phone to stock. It was g935u firmware for tracfone from T-Mobile if that helps anyone in the future.
Click to expand...
Click to collapse
Great it worked.
I flashed the tracfone rom and everything is working well. I got a software update notification. Should ignore it or is it ok to update?
Bumping the thread...sorry guys. I just jumped ship from Verizon and went to Tmobile today with my S7 Edge along with my wifes S7 Edge. Can I flash her phone with the U firm from TMobile and is the U firmware from tmobile the same U firm that is provided to Verizon? Jist wondering. I've used Odin plenty and understand flash process.
DISCLAMER: I AM NOT A DEVOLPER AND MAY NOT BE ABLE TO HELP YOU ON YOU DEVICE. UNSUCCESSFUL ATTEMPTS TO FLASH FIRMWARE ON THIS DEVICE CAN AND WILL BRICK YOUR PHONE. BACK UP EVERYTHING IN EVRY CONCIEVABLE WAY.
After days of trying to do this with all the outdated guides and miscommunications and edits in post i decided to try and make a streamlined guide to help others.
NOTE: If your are looking for anything else other than a stock bloat free unlocked firmware then look elsewhere.
Also if you are using rev 1 booloader then this will ireversablly upgrade you to rev 2 bootloader not a real problem just a note
Download 3B's patched Odin 3.13 https://drive.google.com/file/d/17wH1YHcGsOCxbDGYDoy9VlnqO_Xi6IOm/view?usp=drivesdk
Download samfirm.exe
https://drive.google.com/file/d/1XdboeTqk8pSZyJQVt-IHVHFfznJ9eOQk/view?usp=drivesdk
Thanks to @zxz0O0
If you can't find your own drivers don't do this
1. Extract B3 Odin
2. Extract and run samfirm.exe
3. Make sure auto is checked use SM-G955u1 as model number and XAA as country code then search. It should find you the absolute latest firmware
Hit download and choose file destination. This can take a while.
4. extract firmware.zip
5. Run 3B's Odin and add file to there respective locations. I.e. Ap file in Ap slot etc. Use the non home CDC
6. The only thing you need ticked in Odin are already set by default
7. Boot phone into download mode power+bixby+volume down while the device is off
8. Read the screen that pops up very carefully and decide to continue at you own risk by pressing volume up
9. Connect phone via USB 2.0 port do not use a USB 3.0 port it will not work
Make sure Odin recognizes device if it doesn't then u have a driver issue
10. Press start and wait patiently
11. Phone will reboot it self setup device and insert sim card. You will probably get a notification say phone not allowed a quick call to the service provider you trying to use is all that's in order here
12. Enjoy your carrier unlocked stock SM-G955u1 on your preferred network
I AM NOT RESPOSIBLE FOR ANYTHING YOU DO TO YOUR OWN DEVICE YOU WERE WARNED.
So this gets rid of all bloatware?
From my knowledge, Verizon does not, and has not ever carrier locked their phones. Seems like a lot of trouble just to debloat.. Am I missing something here?
Any idea why it stucks at "SetupConnection.."
This worked GREAT! My Verizon S8+was working fine on AT&T before I did this, but I was stuck on Android 7.0. So thank you so much for this. There's only one thing that bothers me is in my drop down menu there's a notification that says "Sprint OMADM Checking Device Status." Which really isn't a big deal, it's just annoying. Another thing I worry about is, i'm using it on a GSM network, is it actively searching for a CDMA network at the same time and draining my battery? Any input would be appreciated, and thank you again!
I have a verizon s8 plus does this still work please confirm???
xghostyxjokerx said:
I have a verizon s8 plus does this still work please confirm???
Click to expand...
Click to collapse
The method will be similar just need the proper firmwares for your device
This being quite an old post I was wondering ...
I am currently on G950USQS5CSB1 with CSC XAS/XAA/VZW.
Currently I have no carrier bloat (good), I am on Mint with no issues (good) and I get prompt OTA's I assume for carrier VZW but I lack wifi calling which I would like (bad).
I have downloaded G950U1UES5CSB2 for G950U1
Will this work using the 3B modded Odin as described without having to flash the combination files?
normal and Prince Comsy Odin both failed.
Thanks
edit: Took the dive .... worked great thanks, now on G950U1 and have wifi calling and VoLTE
This is great, minus one thing, it installed facebook on my phone, which I didn't have before and never wanted and it won't let me uninstall it..
I'm hoping you are still monitoring this old thread. I have a Verizon Galaxy S8 and followed your instructions exactly (except that I downloaded the files for SM-G950U1 (my current model is SM-G950U). When I start Odin, it gets stuck at "SetupConnection" and never goes any further. Thoughts?
pakkergirl said:
I'm hoping you are still monitoring this old thread. I have a Verizon Galaxy S8 and followed your instructions exactly (except that I downloaded the files for SM-G950U1 (my current model is SM-G950U). When I start Odin, it gets stuck at "SetupConnection" and never goes any further. Thoughts?
Click to expand...
Click to collapse
Did you by chance boot download mode?
Will this work if I have a v5 bootloader?
kukumaka said:
Will this work if I have a v5 bootloader?
Click to expand...
Click to collapse
Yea. I just switched to Verizon. You should be able to just pop your sim in and it automatically carrier switch. Most of these are multi carrier
But yea I don't know about the firmware program he's offering never used it I get mi e from sammobile.com or update.com
Hi, I flashed this rom in my verizon S8+ SM-g955u1, but after that the phone is having the no signal issue. Imei is still there, how to fix this?
fagnerkof said:
Hi, I flashed this rom in my verizon S8+ SM-g955u1, but after that the phone is having the no signal issue. Imei is still there, how to fix this?
Click to expand...
Click to collapse
Is it unlocked
TheMadScientist said:
Is it unlocked
Click to expand...
Click to collapse
Yes, it has unlocked as it recognizes my sim card and carrier. But no signal. I think the problem is the device is with "MIPI device fail" status
fagnerkof said:
Yes, it has unlocked as it recognizes my sim card and carrier. But no signal. I think the problem is the device is with "MIPI device fail" status
Click to expand...
Click to collapse
Never saw that one before. But theres a few fixes supposedly
http://forum.gsmhosting.com/vbb/f453/mipi-device-fail-final-solution-2429954/
You'll have to root and do a nv rebuild it looks like
Need access to hidden menus
TheMadScientist said:
Never saw that one before. But theres a few fixes supposedly
http://forum.gsmhosting.com/vbb/f453/mipi-device-fail-final-solution-2429954/
You'll have to root and do a nv rebuild it looks like
Need access to hidden menus
Click to expand...
Click to collapse
I tried nv rebuild via menu *#27663368378#. I'm not sure if i can root due I'm on bl7
fagnerkof said:
I tried nv rebuild via menu *#27663368378#. I'm not sure if i can root due I'm on bl7
Click to expand...
Click to collapse
Yea not yet. I'm also on 7. We need edl files first. I got the combination rom for the boot img but edl is still missing. I got a few guys looking for it. I typed in the error you gave me and saw a few sites with no box fixes. Normally if you can get to the menu I don't see root being needed. But I may ne wrong since I've never seen this error
This would be great if it worked. However I have my doubts. You would first need to have the phone be from Verizon or be on another carrier and *unlocked* first before changing any CSC using the US OPEN firmware which allows you to simply put a sim card in and switch carriers by swapping sims and letting Samsung reconfigure the phone. The BEST setup is a SPRINT phone.. unlocked.. then converting to U / U1 firmware. You then have every possibility when it comes to carriers sitting at your finger tips!
Good Luck
noidodroid said:
This would be great if it worked. However I have my doubts. You would first need to have the phone be from Verizon or be on another carrier and *unlocked* first before changing any CSC using the US OPEN firmware which allows you to simply put a sim card in and switch carriers by swapping sims and letting Samsung reconfigure the phone. The BEST setup is a SPRINT phone.. unlocked.. then converting to U / U1 firmware. You then have every possibility when it comes to carriers sitting at your finger tips!
Good Luck
Click to expand...
Click to collapse
Your post dont even make sense. The Verizon s8 at the time came sim unlocked. All you had to do was swap the csc. But worked unlocked out of the box. Why would a sprint device be the best setup. All the us s8s are identical. Sounds like you come from LG which is true on devices and versatility. Not Samsung.
I recently switched to Xfinity mobile from AT&T. I got the cheap Moto phone for basically free but would like to use my GS 8 factory unlocked.
When I put in the SIM Card my GS8 is unable to connect to the network.
I recently tried rooting my device and that failure resulted in a warranty claim. Now that I have it back I need assistance... Don't want to spend the money on a new phone as my GS8 works just fine.
Saw a recommendation to flash my device to Xfinity firmware but not sure about this approach given my recent root failure.
Anyone ever BYOD to Xfinity and had to work around the network issues?
I'm a complete noob, but you say your s8 is unlocked so have you tried to change the apn settings for Xfinity mobile
Typically, it's very hard to "brick" a device. As long as you are able to boot your device in upload mode, it's not technically bricked. Most flashing errors can be fixed by booting the phone into upload mode and flashing stock (the original baseband file of the device) firmware in Odin.
I personally think you should be fine using an unlocked phone on Xfinity Mobile (even though it's not technically supported). When you flash in Odin make sure the CSC file is from Xfinity Mobile. Try doing some research in the Carrier Switch thread first.
State.of.mind said:
Typically, it's very hard to "brick" a device. As long as you are able to boot your device in upload mode, it's not technically bricked. Most flashing errors can be fixed by booting the phone into upload mode and flashing stock (the original baseband file of the device) firmware in Odin.
I personally think you should be fine using an unlocked phone on Xfinity Mobile (even though it's not technically supported). When you flash in Odin make sure the CSC file is from Xfinity Mobile. Try doing some research in the Carrier Switch thread first.
Click to expand...
Click to collapse
You mean download mode. Upload only is bricked
zekeman66 said:
I recently switched to Xfinity mobile from AT&T. I got the cheap Moto phone for basically free but would like to use my GS 8 factory unlocked.
When I put in the SIM Card my GS8 is unable to connect to the network.
I recently tried rooting my device and that failure resulted in a warranty claim. Now that I have it back I need assistance... Don't want to spend the money on a new phone as my GS8 works just fine.
Saw a recommendation to flash my device to Xfinity firmware but not sure about this approach given my recent root failure.
Anyone ever BYOD to Xfinity and had to work around the network issues?
Click to expand...
Click to collapse
First off welcome to XDA Im pretty sure I saw you post on the XFIN forums..
Yea I have never seen that issue I have used several byod devices on XFIN all where verizon based though..Which does not matter on s8 as it is a multi carrier device
So first you need to see which firmware you are currently running
Download that exact same firmeware with cct as csc which is what determines carrier Heck if your on tonight I can upload a CCT csc and you should be able to flash one in ODIN if yours is the 950u1 which is unlocked s8 model We will be changing it to a regular 950u which is carrier....
I am Like the local Xfinity guru here as I use them I have mine rooted and everything even bricked several to previous said upload mode But I was playing with deep deep stuff.Nothng that odin can really harm
@HoosierDaddy
Can you upload the Carrier Switch files please?
sresam89 said:
@HoosierDaddy
Can you upload the Carrier Switch files please?
Click to expand...
Click to collapse
Goto sammobile or updato who ever you get your firmwares from and get the CCT branded firmware of your likeness of bootloader revision
I do not have any firmwares on hand any more I lost my old gmail account and my gdrive as well I am starting from scratch
So I recently picked up the T-Mobile version of the OnePlus 6T (A6013) from Amazon that was refurbished by Amazon. Based on the reviews, I expected that I would have to unlock the sim with T-Mobile before I could even use it. Now that I received the phone, upon booting, there was no T-Mobile animation, and I was able to pop both my AT&T sim and my (work) Verizon sim, both totally work to my pleasant surprise. Now that I'm digging into the unlock/root process, I'm a bit unsure if my bootloader is still locked and I need to take my phone from the T-Mobile rom to the international rom, or if I potentially can go straight into installing TWRP recovery and flash new ROMs.
Additionally, if I do go to the international rom, will I still be able to use my Verizon sim? That's not as important, but definitely a nice touch since it's for work, and I'd like to not have to carry around 2 phones anymore.
Any and all help would be much appreciated!! Thanks in advanced!
UPDATE:
So I went ahead and tried the update process to take my phone to 10.0, but every time I update it, even when attempting through OOS' local update function, when I try booting the phone, it gives me an error along the lines of "FW version does not match SW version" - does anybody know what's up with this? Can't seem to do anything else and have had to restore it multiple times with MSM Tool. Will going through the 7-day unlock process help rectify this?