Related
I bricked my HTC 10 by loading Marshmallow firmware on a Nougat device. My device will not boot up and the only inclination of the device being alive is I have HS-USB Diagnostics com port in my Device Manager.
I've been reading a lot on how to unbrick devices with the Qualcomm Snapdragon chip, it appears I need a special .mbn and .xml file for setting the partitions so I can flash new firmware. Most of the files out there are for LG or Xi, and I obviously need the HTC10.
Can anyone point me in the right direction or provide me these files pulled from a good device?
duck95 said:
I bricked my HTC 10 by loading Marshmallow firmware on a Nougat device. My device will not boot up and the only inclination of the device being alive is I have HS-USB Diagnostics com port in my Device Manager.
I've been reading a lot on how to unbrick devices with the Qualcomm Snapdragon chip, it appears I need a special .mbn and .xml file for setting the partitions so I can flash new firmware. Most of the files out there are for LG or Xi, and I obviously need the HTC10.
Can anyone point me in the right direction or provide me these files pulled from a good device?
Click to expand...
Click to collapse
Is possible for anyone to pull these files for me so I can re-partition my phone?
Hi,
After Flash With Wrong Firmware My Phone(XT1766) Is Just Detected As Qualcomm 9008 Device And Not Powering ON.. Can Some One Kindly Provide Me Blank Flash File Or Any Other Solution For This Model..??
i did the same thing
i need help too because i did the same thing....trying to repair apn i just killed my moto e4 xt1766 and there is no fastboot .....please any solution???
If it detects phone Qcom 9008 you can still fix phone by using special emmc write tool ( hard to find ) but there are some on interwebs ....search on Google * try this one ALTHOUGH I HAVEN'T TESTED IT*
I fix QCOM Lg device like that
If your phone is dead dead dead you must Google video on test point ...with test point( shorting your board ) ...phone will detect on usb as Qcom 9008 then you need special Qcom tool like above
*Don't remember name of emmc tool I used on LG*.
Even If We Are Able To Connect It Via Any Qualcomm Tool We Don't Have Appropriate Files Available To Revive It..
So I Think For Now There Is No solution For It( Until Any Developer, Programmer Comes Up With One)..
So I Really Hope Some One Is Working On It As Many Peoples Have Bricked This Model While Flashing It..
prince_arsalan said:
Even If We Are Able To Connect It Via Any Qualcomm Tool We Don't Have Appropriate Files Available To Revive It..
So I Think For Now There Is No solution For It( Until Any Developer, Programmer Comes Up With One)..
So I Really Hope Some One Is Working On It As Many Peoples Have Bricked This Model While Flashing It..
Click to expand...
Click to collapse
Just download this OFFICIAL TOOL FROM QUALCOMM called QPST and see if it can get your device as far as fastboot at which point you can flash files from custom recovery to custom rom
The article is about IMEI but it can do more
https://www.androidbrick.com/ultima...agon-xiaomi-mi5-imei-and-baseband-repair-fix/
---------- Post added at 07:29 AM ---------- Previous post was at 07:19 AM ----------
This QualcommProductSupporTool is official tool ...
1. Ask one guy on stock to dump
2. Use this tool and guide to put dump on phone
https://www.androidbrick.com/unbric...-have-the-right-kind-of-rom-qhsusb_dload_edl/
OR TRY TO PULL STOCK WITH THIS QUALCOMM. TOOL
https://androidmtk.com/download-qualcomm-sw-downloader
*DON'T be lazy your phone won't unbrick solo and nobody can make one button unbrick untool .
KevMetal said:
Just download this OFFICIAL TOOL FROM QUALCOMM called QPST and see if it can get your device as far as fastboot at which point you can flash files from custom recovery to custom rom
The article is about IMEI but it can do more
https://www.androidbrick.com/ultima...agon-xiaomi-mi5-imei-and-baseband-repair-fix/
---------- Post added at 07:29 AM ---------- Previous post was at 07:19 AM ----------
This QualcommProductSupporTool is official tool ...
1. Ask one guy on stock to dump
2. Use this tool and guide to put dump on phone
https://www.androidbrick.com/unbric...-have-the-right-kind-of-rom-qhsusb_dload_edl/
OR TRY TO PULL STOCK WITH THIS QUALCOMM. TOOL
https://androidmtk.com/download-qualcomm-sw-downloader
*DON'T be lazy your phone won't unbrick solo and nobody can make one button unbrick untool .
Click to expand...
Click to collapse
Nothing is working no appropriate file to flash?? Where we claim for that?
any body have blank flash file ?
Need blankflash
i think if someone just find the blankflash for this model it can be flashed whit UAT ....in qualcomm module because this tool recognize the QLOADER 900 port but i dont have any file who works to flash this model .......
Hi
Moto e4 plus XT1776 Qualcomm hard brick please need blankflash file
aminsagar1 said:
Moto e4 plus XT1776 Qualcomm hard brick please need blankflash file
Click to expand...
Click to collapse
Wrong forum. Go to the plus section. But I don't think anyone has that file.
Try the answer in my thread. It worked for me. Just boot to Fastboot and use RSD Lite (I used v6.2.4) and flash the Zip file linked in that thread. I had to manually unzip the file because RSD couldn't handle the long filenames on its own, but if you unzip it and select flashfile.xml inside the folder, it should work.
https://forum.xda-developers.com/moto-e4/help/soft-bricked-boost-moto-e4-stock-t3803233
chuman72486 said:
Try the answer in my thread. It worked for me. Just boot to Fastboot and use RSD Lite (I used v6.2.4) and flash the Zip file linked in that thread. I had to manually unzip the file because RSD couldn't handle the long filenames on its own, but if you unzip it and select flashfile.xml inside the folder, it should work.
https://forum.xda-developers.com/moto-e4/help/soft-bricked-boost-moto-e4-stock-t3803233
Click to expand...
Click to collapse
So the one I linked worked?
we have blank flash for XT1767 but not for XT1766 ....
maybe someone from inside the motorola would leak it in the future
hi
aamszia said:
we have blank flash for XT1767 but not for XT1766 ....
maybe someone from inside the motorola would leak it in the future
Click to expand...
Click to collapse
can u please shere the blank flash file for xt1767
prince_arsalan said:
Hi,
After Flash With Wrong Firmware My Phone(XT1766) Is Just Detected As Qualcomm 9008 Device And Not Powering ON.. Can Some One Kindly Provide Me Blank Flash File Or Any Other Solution For This Model..??
Click to expand...
Click to collapse
Yes we have solution for moto E4 XT1766 Sprint Sperry
https://www.youtube.com/watch?v=dDldcWPEALI
Hi
Can you share that software pls?
xt1766 & xt1767 dead boot repair with usb solution without touch emmc
click here to download files&instructions
https://mega.nz/#!QvQzGIKD!HhY-xK1eLqYx2u5JRz6VCPMoCJvJNG3cEBQOPf7e1QI
password
xpertgsm
irfang0349 said:
click here to download files&instructions
https://mega.nz/#!QvQzGIKD!HhY-xK1eLqYx2u5JRz6VCPMoCJvJNG3cEBQOPf7e1QI
password
https://mega.nz/#!MuIDnILb!eJmmo7IWMLi7DLcsALGKvIVSaKCr9_KjFCnaENeHIYY
Click to expand...
Click to collapse
Waste Of One KB of My Internet ......
He wants money lol .......
Might have some potential here for xt1766 anyways.
XT1766 hardbrick stuck in 9008 mode would normally require a blankflash. However, as is common in most Motorola models there is a boot from SD option that is automatically defaulted to in the case that the bootloader has been deleted or damaged. To use this boot from SD option you simply extract the bootloader to a blank sd card and insert it into the phone then reboot
Here is a bootloader provided to me (Untested)
mediafire.com/file/t2su47wbd3dizue/XT1766-BOOTLOADER.img/file
Hi,
I have hard bricked my new asus z00ud (asus zenfone selfi ) mobile phone while trying to install stock ROM of asus z00ud.
Now, my phone is dead, does not blink LED, no charging.
Only, Device Manager showing port ::: Qualcomm HS-USB QDLoader 9008
Tried to recover using help from website
But, failed, as QFIL unable to download necessary MBN files using SAHARA protocol.
So, please send me MPRG8939.mbn or MPRG8936.mbn or MPRG8916.mbn and all necessary files to recover my dead yuphoria
Please reply urgently.
Thanks.
Download This Zip To Get All Ur Req Files For Flashing using QFIL
A.meslam said:
Hi,
I have hard bricked my new asus z00ud (asus zenfone selfi ) mobile phone while trying to install stock ROM of asus z00ud.
Now, my phone is dead, does not blink LED, no charging.
Only, Device Manager showing port ::: Qualcomm HS-USB QDLoader 9008
Tried to recover using help from website
But, failed, as QFIL unable to download necessary MBN files using SAHARA protocol.
So, please send me MPRG8939.mbn or MPRG8936.mbn or MPRG8916.mbn and all necessary files to recover my dead yuphoria
Please reply urgently.
Thanks.
Click to expand...
Click to collapse
DOWNLOAD LINK (add https or Copy Paste after slashes in ur browser
//drive.google.com/file/d/0B_cLaKfxoNAvVHVZOXdlRFEybkU/view
A.meslam said:
Hi,
I have hard bricked my new asus z00ud (asus zenfone selfi ) mobile phone while trying to install stock ROM of asus z00ud.
Now, my phone is dead, does not blink LED, no charging.
Only, Device Manager showing port ::: Qualcomm HS-USB QDLoader 9008
Tried to recover using help from website
But, failed, as QFIL unable to download necessary MBN files using SAHARA protocol.
So, please send me MPRG8939.mbn or MPRG8936.mbn or MPRG8916.mbn and all necessary files to recover my dead yuphoria
Please reply urgently.
Thanks.
Click to expand...
Click to collapse
Hi Guy Please try this from https://forum.xda-developers.com/asus-zenfone-selfie/help/bricke-z00ud-t3811844
DOWNLOAD LINK (add https or Copy Paste after slashes in ur browser)
//drive.google.com/file/d/0B_cLaKfxoNAvVHVZOXdlRFEybkU/view
gemeriw said:
Hi Guy Please try this from https://forum.xda-developers.com/asus-zenfone-selfie/help/bricke-z00ud-t3811844
DOWNLOAD LINK (add https or Copy Paste after slashes in ur browser)
//drive.google.com/file/d/0B_cLaKfxoNAvVHVZOXdlRFEybkU/view
Click to expand...
Click to collapse
What is the password for that file ?
In the existing notepad file password is not working..
Please help me out on urgent basis
Thanks for sharing this file, as having the same issue! but unable to access due to password incorrect.
Thanks for any information
Prem1431 said:
What is the password for that file ?
In the existing notepad file password is not working..
Please help me out on urgent basis
Click to expand...
Click to collapse
Mod edit - translated by https://www.deepl.com/translator:
the password does not work
*******************************
le mot de pass ne fonctionne pas
Hello XDA members,
my phone did an OTA update but it's dead now (no boot, no recovery, no download mode, only black screen and QDLoader 9008 under Device manager), I looked everywhere for a whole week to find a solution, but nothing seems to work.
There is one thing that I found is that I need to Unbrick it using a JTAG box (but I don't have one).
do you know any other solution that might work in my case?
PS: solutions that I have tried
- Debrick image on SD card.
- using Ubuntu to push img files to the phone but it didn't detect it.
- I wanted to try QFIL but i couldn't find xml files for my phone
thank you for your time :fingers-crossed:
Have your device been fixed?
My Nothing Phone is hard bricked and not working.
No Fastboot Mode
No Recovery Mode
Mobile in Dead Condition.
Nothing Phone 1 Firmware do not have emmc, raw program and patch file.
I own a heavily Bricked Nothing Phone 1. Currently, I am trying to bring it back to life. It is detected as Qualcomm HS_USB QDLoader 9008 (Com3). After spending some time online, i got a possible solution, flashing it using QFIL. I downloaded the firmware, it didn't have 3 files needed to start the flash process which were raw program XML file, patch file, prog emmc file. I looked up Online for these file specifically, But found nothing. Do anyone know what should I do.
I'm interested in this too! EDL Firehose saved my butt twice already. Would be great to have a saviour after an incredible eff-up on this phone.
If I can help in any way, let me know. The QPST tools and COM driver are installed, and can put my working phone in EDL for testing.
up on this post.
me be nothing phone is nothing
my phone now restart problem all i know sulotion already try in try but the same problem
iqcuratorhub said:
My Nothing Phone is hard bricked and not working.
No Fastboot Mode
No Recovery Mode
Mobile in Dead Condition.
Nothing Phone 1 Firmware do not have emmc, raw program and patch file.
I own a heavily Bricked Nothing Phone 1. Currently, I am trying to bring it back to life. It is detected as Qualcomm HS_USB QDLoader 9008 (Com3). After spending some time online, i got a possible solution, flashing it using QFIL. I downloaded the firmware, it didn't have 3 files needed to start the flash process which were raw program XML file, patch file, prog emmc file. I looked up Online for these file specifically, But found nothing. Do anyone know what should I do.
Click to expand...
Click to collapse
QFIL file for Nothing Phone is totally different compared to ROM firmware . You can't flash it . For unbrick the phone you must have this particular QFIL file which I don't think you find it online for now .
If by any chance you find it please share .