Phone on repair - Mainboard replacement - Huawei P10 Lite Questions & Answers

Hello,
I am wondering if my warranty is void as as the repair company is replacing my main board.
I started updating the phone but the phone restarted during the update and it wouldn't boot up. When i tried to boot it up it showed something called "ERROR MODE" "IOM3 IMAGE MISSING" and i don't know if my warranty is void.
Anyone got any ideas?

Related

n-9005 lollipop activation (Processing Failed)

hi experts. i m facing a problem on my phone which i cant activate my phone. my id works i checked it and when i do it on the phone it says Processing failed and now i m stuck on the activation screen. and my csc is muilti and i was using the device before the reset and then i was facing lags and some issue i reset the device now i m facing the activation problem how can i fix that.
Same thing!
I'm facing the same issue. I've tried flashing a new ROM and it seems that it's all blocked by the reactivation lock from Samsung. I've called customer service and they tell me i have to take my phone to a Samsung service center that is 300 miles away. Even then, I think they need proof of purchase, which i got off of Ebay without any IMEI on the receipt...So, i'm hoping someone knows how it can be fixed on here as well.
In the download screen, it says reactivation lock is enabled? What error message do you get when you try to flash a stock rom with Odin? The phone won't boot into any rom?

[HELP] Blade A460 bricked

I'm going to just google translate my question in another forum, so please, sorry if there's a mistake.
My ZTE Blade A460 has died of nowhere, I have sent it to warranty service but have told me that got wet and that does not work and therefore is beyond repair by getting wet (not covered by the warranty).
It failed a suddenly, out of nowhere, it discharged, I put it to charge and when I went to turn it on, remained hanging on the logo of ZTE.
I was super-careful with my cell phone and never dropped him a drop of water (I sneezed once over, but nothing itself). In addition, the cel is stuck on and the logo of ZTE. Enters recovery mode but nothing more. Do not let me wipe or update. Throws me errors like "can not unmount", "sdcard not found" "md5 check failed".
The pc recognizes it as Qualcomm HS-USB QDLoader 9008 (COM4), and MiFlash recognizes it.
Apparently I can flash the cel from my flash, since it takes and everything (installed the drivers). The cel can be placed in download mode (the screen flashes and it was, but so taking the pc, not otherwise)
Someone give me a hand! The cellphone does not have a month and a week and failed! Please! Help!
;_;
Volicius said:
I'm going to just google translate my question in another forum, so please, sorry if there's a mistake.
My ZTE Blade A460 has died of nowhere, I have sent it to warranty service but have told me that got wet and that does not work and therefore is beyond repair by getting wet (not covered by the warranty).
It failed a suddenly, out of nowhere, it discharged, I put it to charge and when I went to turn it on, remained hanging on the logo of ZTE.
I was super-careful with my cell phone and never dropped him a drop of water (I sneezed once over, but nothing itself). In addition, the cel is stuck on and the logo of ZTE. Enters recovery mode but nothing more. Do not let me wipe or update. Throws me errors like "can not unmount", "sdcard not found" "md5 check failed".
The pc recognizes it as Qualcomm HS-USB QDLoader 9008 (COM4), and MiFlash recognizes it.
Apparently I can flash the cel from my flash, since it takes and everything (installed the drivers). The cel can be placed in download mode (the screen flashes and it was, but so taking the pc, not otherwise)
Someone give me a hand! The cellphone does not have a month and a week and failed! Please! Help!
;_;
Click to expand...
Click to collapse
anyone has idea to resurrect this phone am in the dilemma and which tool

Huawei Y625 DataBackupStart softbrick

So my girlfriend's phone, a Huawei Y625 after she took the battery (I suspect during an update but she doesn't know) got soft bricked, all I get when I turn the phone on is a DataBackup screen and multiple processes failure notifications.
I tried to wipe/factory reset but I'm still greeted by the same screen and errors.
I tried installing an update rom from the website and some I found online but I get an error saying: "cannot install this package over newer build" so I tried to edit the date on the build.prop file but then I get a signature error.
The phone is not rooted and I would prefer not to have to (but I really don't care that much).
Also the screen glass is cracked so they gave her the bull**** "no warranty because of damage" excuse.
Could someone please help?

Bad flashing through MiFlash

Hello! A few days ago I tried flashing the android 9.0 in the MI A2 and in the middle of the process I turned off the PC and did not finish the process ... I wanted to turn it on and it remains in the MI logo, I put it in fastboot mode but the pc does not recognize me the cell and it does not let me flash again ...
What I can do?:crying:
thank you.
andygunch1993 said:
Hello! A few days ago I tried flashing the android 9.0 in the MI A2 and in the middle of the process I turned off the PC and did not finish the process ... I wanted to turn it on and it remains in the MI logo, I put it in fastboot mode but the pc does not recognize me the cell and it does not let me flash again ...
What I can do?:crying:
thank you.
Click to expand...
Click to collapse
go in fastboot
cmd -> then "fastboot oem edl"
the phone will turn on in the bootlader mode ... run my flash and upload the system I install there and I have no problem
when MI Flash shows the message success
disconnect the phone from the computer
keep the power button on the phone will not show the AndroidONE logo
martin5263 said:
go in fastboot
cmd -> then "fastboot oem edl"
the phone will turn on in the bootlader mode ... run my flash and upload the system I install there and I have no problem
when MI Flash shows the message success
disconnect the phone from the computer
keep the power button on the phone will not show the AndroidONE logo
Click to expand...
Click to collapse
That's not going to work, I had the same problem, you have to force the EDL mode with the test points on the motherboard.
Check this: https://forum.xda-developers.com/showpost.php?p=78554236&postcount=12
syncstar32 said:
That's not going to work, I had the same problem, you have to force the EDL mode with the test points on the motherboard.
Check this: https://forum.xda-developers.com/showpost.php?p=78554236&postcount=12
Click to expand...
Click to collapse
can I change the batteries?
martin5263 said:
can I change the batteries?
Click to expand...
Click to collapse
I don't understand
syncstar32 said:
I don't understand
Click to expand...
Click to collapse
you can replace the batteries with a new one ?
andygunch1993 said:
Hello! A few days ago I tried flashing the android 9.0 in the MI A2 and in the middle of the process I turned off the PC and did not finish the process ... I wanted to turn it on and it remains in the MI logo, I put it in fastboot mode but the pc does not recognise me the cell and it does not let me flash again ...
What I can do?:crying:
thank you.
Click to expand...
Click to collapse
This was same problem with me .So due to my was under warranty and I know opening phone(Because there is possibility that many Xiaomi Devices like redmi series , these devices can force device to edl mode by sorting points in board) may void warranty. So I don't consider to take risk and went to service centre and after 2 day they weren't able to recover ,that said if I would take risk to recover it wont happen just due to motherboard was damage due to partial flash and it also Fastboot and boot file thus device wasn't detecting or going into that mode .
My best recommendation is get repaired from service centre .BEFORE warranty is Void
I Got New Board with new IMEI and all new stuff.
Rushikesh googlelar said:
This was same problem with me .So due to my was under warranty and I know opening phone(Because there is possibility that many Xiaomi Devices like redmi series , these devices can force device to edl mode by sorting points in board) may void warranty. So I don't consider to take risk and went to service centre and after 2 day they weren't able to recover ,that said if I would take risk to recover it wont happen just due to motherboard was damage due to partial flash and it also Fastboot and boot file thus device wasn't detecting or going into that mode .
My best recommendation is get repaired from service centre .BEFORE warranty is Void
I Got New Board with new IMEI and all new stuff.
Click to expand...
Click to collapse
if it is in warranty so I will resort to take it and they tell me, but take it to a technical service that can be solved, it hurts that here in Argentina there are not many who know or repair .....
A similar thing happened to me. I was flashing Pixel Experience (clean installed stock Oreo before that) and once the flashing finished and I switched to the partition it flashed to I was greeted with the Android One screen without the Unlocked message at the bottom. The phone wasn't even detected by my PC while in fastboot so I just went to the service center and told them it just got stuck like that after a system update. They fixed it and it was covered by the warranty.

Samsung S5 Neo An error has occurred while...

So I am actually not sure what happened to my phone, at first it did not want to go through the Samsung S5 NEO powered by andriod logo, It said custom binary blocked by frp lock in the top left corner. So I did some research and first I found that using Samsung Kies I could fix it but when I put my sin number in it keeps on saying: "please check the model name and s/n and enter them again". So I did some more research and found out my best bet is just to load a rom on to my phone so I got it into download mode, Power+Home+VolumeDownButton and found my phones andriod 6.0.1, The exact andriod that it currently has, I started the process of it sending it to my phone and then when it was done it rebooted and started saying "An error has occurred while updating the device software. Use the Emeregency recovery function in the Smart Switch PC software. When I put my phones model name and s/n number it again says "please check the model name and s/n and enter them again". I am not sure what to do anymore, I can do nothing with my phone anymore. Is there anyway to get it working again? and hoviously my warranty is voided, but it was exipred by now because I have had the phone for a good 3 years if not longer by now.

Categories

Resources