I'm going to just google translate my question in another forum, so please, sorry if there's a mistake.
My ZTE Blade A460 has died of nowhere, I have sent it to warranty service but have told me that got wet and that does not work and therefore is beyond repair by getting wet (not covered by the warranty).
It failed a suddenly, out of nowhere, it discharged, I put it to charge and when I went to turn it on, remained hanging on the logo of ZTE.
I was super-careful with my cell phone and never dropped him a drop of water (I sneezed once over, but nothing itself). In addition, the cel is stuck on and the logo of ZTE. Enters recovery mode but nothing more. Do not let me wipe or update. Throws me errors like "can not unmount", "sdcard not found" "md5 check failed".
The pc recognizes it as Qualcomm HS-USB QDLoader 9008 (COM4), and MiFlash recognizes it.
Apparently I can flash the cel from my flash, since it takes and everything (installed the drivers). The cel can be placed in download mode (the screen flashes and it was, but so taking the pc, not otherwise)
Someone give me a hand! The cellphone does not have a month and a week and failed! Please! Help!
;_;
Volicius said:
I'm going to just google translate my question in another forum, so please, sorry if there's a mistake.
My ZTE Blade A460 has died of nowhere, I have sent it to warranty service but have told me that got wet and that does not work and therefore is beyond repair by getting wet (not covered by the warranty).
It failed a suddenly, out of nowhere, it discharged, I put it to charge and when I went to turn it on, remained hanging on the logo of ZTE.
I was super-careful with my cell phone and never dropped him a drop of water (I sneezed once over, but nothing itself). In addition, the cel is stuck on and the logo of ZTE. Enters recovery mode but nothing more. Do not let me wipe or update. Throws me errors like "can not unmount", "sdcard not found" "md5 check failed".
The pc recognizes it as Qualcomm HS-USB QDLoader 9008 (COM4), and MiFlash recognizes it.
Apparently I can flash the cel from my flash, since it takes and everything (installed the drivers). The cel can be placed in download mode (the screen flashes and it was, but so taking the pc, not otherwise)
Someone give me a hand! The cellphone does not have a month and a week and failed! Please! Help!
;_;
Click to expand...
Click to collapse
anyone has idea to resurrect this phone am in the dilemma and which tool
Related
Hello all, after ota update i stuck in bootloop, than i try factory reset, than i try to install CWM via fastboot and than my phone get bricked. First time before i bring phone to phone service phone shows LG logo and than security boot error. After "service provider" gives me phone back to me and tell me that he couldnt do nothin i try to power on the phone but screen is only black, nothing on it. Computer shows my phone like Qualcomm HS-USB QDLoader 9008 (com 3 port) . What should i do now, is there any chance to revive it ?
Thanks
djordjesl said:
Hello all, after ota update i stuck in bootloop, than i try factory reset, than i try to install CWM via fastboot and than my phone get bricked. First time before i bring phone to phone service phone shows LG logo and than security boot error. After "service provider" gives me phone back to me and tell me that he couldnt do nothin i try to power on the phone but screen is only black, nothing on it. Computer shows my phone like Qualcomm HS-USB QDLoader 9008 (com 3 port) . What should i do now, is there any chance to revive it ?
Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2582142 if you have partition pop out try this link
skypang said:
http://forum.xda-developers.com/showthread.php?t=2582142 if you have partition pop out try this link
Click to expand...
Click to collapse
Like him i have the same problem, and i don't see any partitions at all, nothing appears when i plug mi phone
Hi everyone
I tried to updade my huawei nova CAN-L11C530B130 to CAN-L11C432B340
I think the copy/paste of the UPDATE.APP ****ed up beacause the transfer time was very short...Anyway the phone accepted the update but turned off after that.
Now I can't boot, no recovery, no download mode, not even a charging led light.
Please tell me there is a way besides RMA
Thank you very much :good:
Well, either there is no charge (try keeping it on charger for a few hours) or it is totally bricked based on what you said. If it is completely unresponsive there is really nothing you can do.
Boot loader doesnt start as well?
Thanks for your help
I tried an all night charching but It did not help, no boot loader either.
What about the version I had : CAN-L11C530, I don't find any results about it on the internet, strange right ?
When I plug the phone to my computer I get "Qualcomm HS-USB QDLoader 9008 (COM3)"
You could try contacting Huawei support, their is a qualcomm flash tool. You need the tool and the rom to use it. I know it worked on the Nexus 5, but have seen nothing like it for us. I would try going to a shop and asking, but I do not know how viable that is for you.
Thank you wangdaning, it's very kind of you
I'm gonna leave the phone to the carrier who will send it to huawei.
I'm just surprised how easy it was to brick, I have a honor 8 and a mate 8 and it never happened.
I wonder if it comes down to it being a defective device. I have run circles of flashing on mine and it does not brick. I am running Lineage and even the build is not for my device. I have manually flashed partitions, wiped and reflashed partitions (in fastboot). I have made it unusable at times, but never bricked. It works fine now. Seems it might just be an unlucky bad unit you got. Hopefully you had all your stuff backed up and hopefully you get a unit that works well next time.
No Fastboot, No Recovery, No Download Mode, just a black screen. All Partitions of Phone got deleted. Pc is only detecting it as "Qualcomm HS-Usb Diagnostic 900E(Com10)" but unable to flash stock firmware. Getting the following error in Qfil.
...
"Download Fail:Switch To EDL FailFailed to Switch to Emergency Download mode".
Phone is also heating up as it have no OS installed.
I also faced this same problem in the past but i was able to recover my phone. Right now i don't remember how i did it but give me some time to think about it. I am sure someone else will help you just don't give up!!
Go to this link and try to follow their tutorial. It might help you.
https://firmwarefile.com/lenovo-vibe-k6-power-k33a42
ImSSin said:
I also faced this same problem in the past but i was able to recover my phone. Right now i don't remember how i did it but give me some time to think about it. I am sure someone else will help you just don't give up!!
Go to this link and try to follow their tutorial. It might help you.
https://firmwarefile.com/lenovo-vibe-k6-power-k33a42
Click to expand...
Click to collapse
Thank You ?
I am also trying my best to recover the phone and i will write here so that anyone who is facing this issue can recover his/her Phone.
No Solution found for this.
...
You have to send your Lenovo K6 Power to Lenovo Service Centre and get your Motherboard replaced.
If your phone is in guarantee then you will get free replacement no matter if your phone is rooted but please don't tell about root to them otherwise they will charge money for your small mistake.
what happened?
Do a new install
faizynadim said:
No Fastboot, No Recovery, No Download Mode, just a black screen. All Partitions of Phone got deleted. Pc is only detecting it as "Qualcomm HS-Usb Diagnostic 900E(Com10)" but unable to flash stock firmware. Getting the following error in Qfil.
...
"Download Fail:Switch To EDL FailFailed to Switch to Emergency Download mode".
Phone is also heating up as it have no OS installed.
Click to expand...
Click to collapse
Boss it seems that you have hard bricked your phone so it means it's first boot has been corrupted there is no chance as first boot is mandatory to flash any file, there are some tools like octopus, or Medusa box, they can repair your boot then the phone can be used its just an outside chance 5o get it in workable condition look for some person or Repairing person have this boot repairing gadget,
If this fails too or you have messed up very badly then, last option is mother board replacement, there is no software option to repair by yourself
Help please..!!!!
:crying:
Even I face the same problem...
How do I go to download mode..???
It's stuck at Lenovo screen .... It just turn off on low battery and reboots on long press of power button.. Is it compulsory to have 80% of charge to get into download mode..???
i did the same. it switches on with lenovo logo , shows the os logo animation and its stuck there. when i tried connecting it to phone it showing unspecified device.
i could get into a fastboot mode . but nothing ahead to that. please find me a solution
Help me same issue
faizynadim said:
No Fastboot, No Recovery, No Download Mode, just a black screen. All Partitions of Phone got deleted. Pc is only detecting it as "Qualcomm HS-Usb Diagnostic 900E(Com10)" but unable to flash stock firmware. Getting the following error in Qfil.
...
"Download Fail:Switch To EDL FailFailed to Switch to Emergency Download mode".
Phone is also heating up as it have no OS installed.
Click to expand...
Click to collapse
Did you find any solution for this, present i'm facing same issue, please tell me if you have any solution for this...
Can anyone help or atleast explain what is this state i do know that it is some sort of emergency mode for smartphones but the phone is stuck in this state for 2 weeks with no detection in odin software only i see this in the device manager.
I have seen some unbrick threads that suggests me to use the sd card method to unbrick the phone but no matter what i try with button combinations or even putting in the freezer the phone would not go into download mode or even boot up.
So my main question is the SOC of this phone is dead p.s this is what i suppose
Or i am dumb or missing something
p.s The phone does turn on at some point if i leave it overnight but for the past 2 weeks even this is not happening even after removing the battery.
Your help would be apprieciated
Hello, i think my phone is completely dead. Here's what happened : i wanted to go back to a stock ROM so i used MiFlash, but it gave me an error really early after a couple seconds (modem flash error i think) and now it doesn't respond. When i connect it to my PC nothing happens (nothing in device manager). The only sign of "life" is that when the battery is low (i think that's the case), the LED starts flashing RED until the phone runs out of juice. Any ideas? I already tried charging the phone all the way up and then discharging it completely(those are the only things that seem to work as they should) but the phone seems completely dead. I had a similar thing happen to me before on my older Xiaomi phone but that time my PC at least managed to detect it in device manager as qdloader 9008 (EDL mode) but that just doesn't seem to work now. Would shorting the test points work to make it go into EDL mode or is it a lost call? The bootloader was unlocked before flashing and i chose the option in MiFlash that doesn't lock it again. Thanks for anything. EDIT: Phone sent to a repair centre.