So Yesterday for no reason at all my 8525's screen went white. i thought it had frozen or some thing but it didn't snap out of it. I pressed the ok button on the side and could hear noise. I decided to restart. Nothing. Did this like 7 times. Finally I let it sit without the battery for like an hour. I worked but the colors were all messed up. Reset and it worked fine. So i set my alarm went to sleep and woke this morning to an email and a white screen. Turning it on and off a couple of times did it and I was already frustrated.
Then I read on a forum about Activesync automatically opening throughout the day to try and connect. So I tweaked that to manual connections. Still the same. So I decided to take advantage of the warranty but I needed to set back my rom b/c as you already know, it voids it. Also thinking that re-flashing might get rid of whatever it was failing in. No, still the same, and now worse. As or an hour ago, my navigation pad doesn't work either. It actually works for about a second when I turn it on and then after I press anything on the pad or surrounding buttons, it's gone.
I really would like to fix it myself at least for now and use the warranty exchange at about 11 months but if theres nothing I can do, I guess I can go get a new one. Also, I don't know if it has anything to do with it, but I downloaded Google Maps to my phone yesterday on the road (through 3G) and that was the only new program installed( I think it mightve been this).
Has this happened to anyone else?
Any help would be much appreciated. I hope I explained enough for anyone to respond. Thank you in advance to anyone with anything really.
Actually if you do a search under white screen you'll find many entries. Any attempt to fix yourself will void the warranty. If you are lucky it may only be the d-pad connector that is loose. This it is possible to check yourself but if have a warranty then I suggesting using it.
Otherwise see the link to my site in my signature for dismantling and service manual guides.
Mike
Thanks. You know I think I will take advantage of the warranty sometime this week. I don't know what happened. But I'm to update my situation. It now seems as though my directional pad seems to be the problem. it glitches on and off and using it sometimes creates the fade-out to white screen. I have to let it go to standby on its own to get my screen back or play around turning it on and off for a bit.
Also, once i re-installed me ATT rom with no applications, my screen seems to be off. I have a 1/32th sliver of the bottom of the screen at the top of my touchscreen. Even in landscape it shows my scroll bar and everything. I didn't even drop it but it is now slightly skewed down. Any input on this?
I also found this website talking about the same problem having with and unorthodox solution (which I tried to no avail). Here's the link if anyone want to check this out. http://www.htcwiki.com/page/AT&T+8525+Display+issues:+Display+is+dim,+blank,+white,+has+lines,+etc.?t=anon
Anyways, I'm gonna call ATT about this see if they can help but I think I will replace, I just didn't want to so soon.
Thanks again for the quick answer.
ckent03 said:
Thanks. You know I think I will take advantage of the warranty sometime this week. I don't know what happened. But I'm to update my situation. It now seems as though my directional pad seems to be the problem. it glitches on and off and using it sometimes creates the fade-out to white screen. I have to let it go to standby on its own to get my screen back or play around turning it on and off for a bit.
Also, once i re-installed me ATT rom with no applications, my screen seems to be off. I have a 1/32th sliver of the bottom of the screen at the top of my touchscreen. Even in landscape it shows my scroll bar and everything. I didn't even drop it but it is now slightly skewed down. Any input on this?
I also found this website talking about the same problem having with and unorthodox solution (which I tried to no avail). Here's the link if anyone want to check this out. http://www.htcwiki.com/page/AT&T+8525+Display+issues:+Display+is+dim,+blank,+white,+has+lines,+etc.?t=anon
Anyways, I'm gonna call ATT about this see if they can help but I think I will replace, I just didn't want to so soon.
Thanks again for the quick answer.
Click to expand...
Click to collapse
Everything they suggest on that site you have tried I guess, the soft and hard resets etc.
I agree with you about the d-pad (directional buttons). Those with this problem often report that the d-pad or it's connector are re;lated to this issue.
Pleased you have chosen the warranty route. You see evn if you opened it up, it can work for a short while and then return again. Also push hard for replacement not repair. They may do this automatically but if not try to persuade them. The reason is that quite a few folks have reported that even after an HTC repair the problem can come back. Actually I think there may be more than one physical cause of this issue and sorting one thing does not mean it won't come back via another route.
The good news is, if you get a good one as I did on the second attempt, I never had white screen or alignment issues - despite heavy use.
Mike
Once again, thank you Mike for all your input. I will be issuing an order for replacement instead of repair. Being at work all day today I've seen that it hasn't "whited' out, if you will, but has actually kept working. Ever so often the d-pad goes but comes back in a few seconds. It may be due to the WM6 i had on it so for now i will keep the original ATT upgrade of WM5 and try to hold off on the warranty as long as I can before it expires. That way I can enjoy a healthy new 8525 longer.
For now I will keep looking around in these forums and see if there ever is a solid solution. Thanks again, and good luck with all.
CKent
Sorry for jumping in here. I've got one of those winmo HD2 jobbies.
But a non computer literate friend of mine has a problem with his legend.
The notification swipe from the top keeps randomly obscuring the screen when he's using the phone. Mid text. half way through dialling. Just when you don't want it the notification pane will swoop down and obscure everything.
Is this a known problem?
Is there a widget to restart just the sense part of the phone without doing a full soft reset? (I have such a button on mine)
He has updated the software with the latest release from Vodaphone and it still does it.
Any tips?
Thanks loads
Al
You can restart Sense by closing it in the running Applications list, or by using any application management app.
However, from the description of the problem I'd say there is something wrong with the screen. I had similar symptoms on my 2nd legend when the lefthand 8mm of the screen went wonky. There are multitouch test apps in the Market which you can use to check the functionality of the screen, they helped me pinpoint what was going on.
Had it before. The way I do it is to swipe it down again and you can swipe it back up. The other way is to flash another ROM. That did the trick permanently for me.
restarting sense
Ace Melon said:
Sorry for jumping in here. I've got one of those winmo HD2 jobbies.
But a non computer literate friend of mine has a problem with his legend.
The notification swipe from the top keeps randomly obscuring the screen when he's using the phone. Mid text. half way through dialling. Just when you don't want it the notification pane will swoop down and obscure everything.
Is this a known problem?
Is there a widget to restart just the sense part of the phone without doing a full soft reset? (I have such a button on mine)
He has updated the software with the latest release from Vodaphone and it still does it.
Any tips?
Thanks loads
Al
Click to expand...
Click to collapse
Hi,
I have the same issue on my Legend, seems total random.
I have to restart my phone in order to get it back to "normal"
As this seems to be a software bug , I really hope they will fix it in 2.2
(if we ever get it
Thanks for the replies. He's taken it back to the shop and told them to fix it.
Now he's worried he's going to get a reconditioned/refurbished one instead of the shiny new one he took in.
No pleasing some people
Hey my lovely XDA-ers, I'm really hoping for some magic here...
Yesterday my HD2 digitizer just stopped working... the Touchscreen will not respond to any inputs. It was bitterly cold outside so I was half hoping that an overnight stay in a warm room would help, but no avail...
The thing is, on one in every 5 restarts, I get a small amount of life from it. One one in 15 restarts, I get full use. So there's still life in there.
I could understand if it broke because I dropped the phone/squashed it, but at the time I was just playing Robo Defence, completely normal use, when all of a sudden it stopped responding.
I've uploaded a video, which shows how, occasionally, the bottom fifth of the screen works. However, as shown, when I'm using the top half of the screen, the digitizer appears to be receiving input from the bottom of the screen, as though I'm trying to perform a multi-touch action. For this reason I'm hoping there still be some way to rescue the phone without an expensive repair job. I bought it in March from XDA Marketplace, and it's served me faithfully since, but because of that I do not think I have the manufacturer's guarentee, or insurance
I've hard-reset, I've reflashed my ROM, I've tried in both WM and Android (my usual OS at the moment), I've reflashed over WM ROMs, and the problem stays the same... (also read all related threads!)
Sorry for inverted nature of vid!
So does anyone have any suggestions to try? Otherwise I might go through a £130 repair service on htcrepairs.co.uk - they do not show up on a forum search so I was wondering if anyone had used their service before?
Thanks all, appreciate any ideas.
Edd
Very odd indeed. I don't have a solution for your problem, but a suggestion. It is a long shot, but might help.
Whenever i had similar problems with my Wizard (i know, kind of old but one of the best older devices every made by HTC), i opened it and cleaned it from the inside and checked all the connections of keyboard, touchscreen, etc. to the mainboard. Sometimes it helped...
In the end, if you buy the replacement kit, you anyway have to open the HD2, so why not try this in prior to buying the kit...
A lot of people seem to have this problem. There's a lot of information on it here. Do a search. But the short answer is its a hardware problem. If your phone is still under warranty send it back. I think HTC will fix it for free if It's less than a year old. But try your carrier first.
Sent from my HTC HD2 using XDA App
BAD NEWS...
i had EXACTLY this happen to me. eventually it totally stopped responding. Only option is to replace the digitizer.
GOOD NEWS..
After a month of searching, I found a really good guy to do it. www.iexpertstudio.com . The owner is VINCE. you can email him on his site. He charged $110 including mailing it back to me. He replaced the LCD and digitizer and sent it back. All works perfectly now.
I see you are in the UK so dont know if it makes sense to send it to the US. Alternative is to go on ebay and buy the screen/digitizer and replace it yourself.
(BTW normally i would have chucked the device, but even after 1 year I still dont think there is as versatile a device as the HD2. Had the DHD been 3G useable in the US I would have bought one.)
Thanks for the feedback guys, I've been doing some investigation my end (and you're right, there are similar threads on here, but none which had a "half-screen working" problem.)
I've narrowed the culprit down to my "Back" button. It's somehow exerting pressure on the screen, leading to either a non-responsive digitizer or an input at the bottom of the screen.
I might add this to an entry in the "ANDROID KILLS YOUR BUTTONS" thread
My choice is to live manually with it, or get the company mentioned in the first post to give it a good clean, but whether it's worth £80 just yet is a question for me.
Anyway, thanks for your input, guess this thread will close, but to any readers in future, if your screen seems to die, see if it's pressure on the screen caused by the buttons!
I can totally support your reasoning.
I haven't had any problems whatsoever with the touchscreen in almost a year of honoured career of this phone, while this morning I was trying to unlock it with no success (nothing special happened, I even used it 10 minutes this morning already). At first I thought it was the usual "sleepy" behaviour of the screen right after waking up, butafter sliding down the hdmini style unlocker at least 10 times with no effect I really started freaking out :O
I have longpress endkey set on instant reboot, and after that it seemed working... just not for too long.
To cut to the chase, what in my opinion supports your idea of hardware buttons interfering is:
sometimes, as I have LMT installed, with the tap&hold option enabled, swiping with just one finger triggered double swype instead (as if the screen detected a second, firm press on the screen elsewhere even if I sure as heck was swyping with one finger)
using mymobiler didn't work as well; if it was a hardware touchscreen problem, mymobiler should work, as it simulates touches, so it will just do its job even if the touchscreen is totally dead... while, IF the hardware touchscreen detected a firm press somewhere, mymobiler wasn't able to actively simulate another press
repeatedly pressing on the end key (which seems to be the culprit in my case) apparently solves the problem, as I can use the touchscreen again; also, a prolonged cycle of hibernating with end key, waking with end key, swyping down the hdmini lock (repeat at libitum) seemed to work, as if I dislodged something by activating the button so often
What I don't understand anyway is: HOW can a button pressing on the digitizer be exerting a touch action? If this was a resistive screen, I'd understand, but it's capacitive, and not even capacitive pens are so good as fingers in activating the touch. The buttons are just plastic with a metal contact underneath, and this metal contact shoudl by no means be anywhere near the digitizer.
Bah.
I know I have 2 years warranty on this device, but being far from my phone during the warranty processing gives me the creeps, so I'll just go on using it and pray this to be the defaillance of one sunday morning not to be seen again... after several soft resets (and fantasizing about a new rom flash, which I need anyway for other reasons) the problem seems to have settled by delicately bashing on the end key. The unlock slider is responsive after every wake up now... FOR now.
Praying...
My screen also died. So the only thing I have to do is press on the end key for a couple of times to make it work again?
lol, that's ONE possibility.
Just saying, in my case it worked, and still does since it happened once more this evening, so it's definitely got something to do with the hardware keys messing around (and hopefully dislodging themself for good, or I'll have to send it back for servicing), anyway in your case it could also be a dead digitizer, so no go
let's put all this about touch screen in 1 sticky thread pls.
I've been living for the problem for about three weeks now. It's never got worse, but never got better. It's a livable situation so for the moment I'll deal with it. I might check with HT about warranty, but it's not yet bothersom enough to make me want to flash back to stock, send it off etc. etc.
smeddy said:
I've been living for the problem for about three weeks now. It's never got worse, but never got better. It's a livable situation so for the moment I'll deal with it. I might check with HT about warranty, but it's not yet bothersom enough to make me want to flash back to stock, send it off etc. etc.
Click to expand...
Click to collapse
ditto.
Actually, I don't like having paid good money for a defective phone, but being without HD2 for up to a couple of weeks to one month (maybe? have no idea how fast HTC servicing is) is troublesome. I may buy for a deal a blue angel as a spare, yet, no GPS...
The most problematic event is if you get the "stuck" screen during a call.
In my case, it's the end key that messes it up; if the screen's dead, pressing twice the end key, firmly enough (once for screen off, then again for screen back on) wakes up the screen, and apparently, during a ringing incoming call, you can press the hardware end key without rejecting it, so it's a viable option (not taking into consideration the fact that trying to wake up the screen takes time, and the caller may give up after a while if you're not fast enough).
But if for any reason the screen gets stuck while the call is connected, I am stuck too, as to wake it up I should press the end key thus hanging on the other party.
Sad story.
EDIT: forget what I wrote, pressing end key while phone is ringing WILL reject the call. I tried it before during a real incoming call and apparently it didn't do it, but now it just did.
I also have a HD with a dead screen....
Only thing here is I have sent it back twice already to TelSuck here in Australia only to have it returned after the tech has wiped it over and reflashed it for me... What helpful little imps they are!
Code:
http://www.youtube.com/v/T6ssqmpRIB0
Its drivin me nuts sending it away for 3 weeks at a time to have someone with just enough grey matter to be able to wield a screwdriver tell me nothing is wrong.
Happy to try any suggestions!
@insinr8
this thread is just for half-dead screens where the screen sometimes actually works. Unless you can resurrect it by firmly pressing on the hardware keys, but if it's dead on a regular basis, then it's not our same problem I'm afraid :-(
@OP
while having an "attack", did you try plugging out the microsd to see if it magically solved the problem?
I mean, if it did, it would still be a hardware problem related to the microsd slot, since there is no point for a faulty microsd to mess up the touchscreen, and let it work from time to time
ephestione said:
@insinr8
this thread is just for half-dead screens where the screen sometimes actually works. Unless you can resurrect it by firmly pressing on the hardware keys, but if it's dead on a regular basis, then it's not our same problem I'm afraid :-(
@OP
while having an "attack", did you try plugging out the microsd to see if it magically solved the problem?
I mean, if it did, it would still be a hardware problem related to the microsd slot, since there is no point for a faulty microsd to mess up the touchscreen, and let it work from time to time
Click to expand...
Click to collapse
I will try that - it seems to happen more frequently when plugged in and charging, and now more buttons seem to be the cause/fix (e.g. now the home-button, or when I am on home-screens the phone will swipe "left", whereas before it would swipe "right". I'll keep playing.
I may check out HTC as I reckon my warranty, if I have one, will run out soon... Will still wait til after Xmas as I need my toy for the boring bits of Xmas!
I'm having same trouble now whit my phone except problems started mouth ago. After some period I again power up my phone and suddenly everything worked perfectly. Unfortunately this last only for two days and then exactly same problems happened, partially function screen.
As far as I know only good solution is replacing digitizer... I already ordered one for me.
exactly the same problem for me.. I sent it back with warranty yesterday
smeddy said:
I may check out HTC as I reckon my warranty, if I have one, will run out soon... Will still wait til after Xmas as I need my toy for the boring bits of Xmas!
Click to expand...
Click to collapse
Ditto.
Actually, my warranty lasts two years, which means until 2012, anyway I cannot stand risking to lose calls because the screen dies on me in the wrong moment, and the only way to wake it up is pressing the endkey (which by the way is the only "cure", and apparently never the cause).
I will be uploading a video on youtube regarding this, also to show it to the guys at the HTC support who will be asking me to hard reset and reflash until annoyed to death (as if that will solve anything)
Bump
This is the video that I just uploaded to youtube:
http://www.youtube.com/watch?v=C3-PNYwpYeI
EDIT: One day after, the problem has become way more frequent, 1 out of three times I wake up the phone, diugitizer is dead and I need the " on the end key to make it work
Uploaded another video on youtube with problem showing on vanilla lockscreen so HTC support doesn't try and tell me it's CHT lockscreen's fault
Last bump.
Screen has ben promoted from "hardware key problem" to "permanent death".
Now I can use the phone with mymobiler, but I can't anymore with touch, I seem to not be able even to wake it up even by pressing on end key
Re-flashing last official rom upgrade now to see if anything changes... yeah,sure
Ouch - good luck, hope mine doesn't go that way...
I just got my transformer in a few days ago, bought it off of a store on eBay that I HAVE ordered from before. All the plastic was on the device and everything, thank god I haven't flashed custom ROM. Just a few minutes ago my girl was playing pinball when the screen started going NUTS on her. The screen started flashing on and off and then colored waves of pixels started passing through random bits of the screen. The game stayed in the background while all this happened I guess on top of it. It just kept doing it and would act like it was going to stop for a second then happen again. Finally I was able to turn it off after having to time my ninja-like finger jabs with the screen flicker. I waited a few minutes and turned it on again. The ASUS screen popped up and then went black for a minute, I pressed the power button quickly and the Eee pad screen popped up and then went into the lock screen. Everything seemed normal for 2-3 minutes, I downloaded a quick dead pixel detector app and everything passed fine. I just rooted last night using Razorclaw, so I checked my superuser to make sure there were no problems (just in case) and it needed an update. I did so and checked it, because it kept force closing auto-open apps when the tablet booted, after the update those apps opened fine (titanium and rom toolbox). right after this, maybe about total 7 or 8 minutes after booting, the screen began flashing again as I was trying to uninstall the dead pixel app. eventually she timed her own finger jabs with the demon screen flicker and clicked OK to uninstall app. as it was uninstalling the screen started working fine. right after it was done uninstalling (bout 30 seconds), what do you know, the bloody ( i love that word) screen started being crackhead-ish again. Its turned off now. Does anyone have any prior experience with this issue? I will contact the razorclaw team to ask them if maybe its a side effect, but I just wanted to see if any of you folk knew anything about this. It IS a newer B70 model and I do have another 5 days to ship it for a return from the seller. I'm pretty sure I will unless I get a response with a sure fix for this being software or something. Also while I've got your attention, I'm under the impression I can boot to stock recovery to factory reset? hopefully at least.... and if I do so, please tell me this will remove root access?
Thanks much in advance for your answers, which I'm sure there will be some useful info as usual with XDA.
Lemonoid
UPDATE: MY tablet won't turn on now.
Best option, return the defect peice..
Hey .. if you have 5 days to return to the shipper, go ahead and return the defect piece. My wild guess is that it has no connection to the software installed or rooted, its mostly an hardware issue (first of its kind though).
I have not faced any screen related issues with my B80 version...
Return this & Get Prime
Cheers,
Amrth
i do agree with the guy above,
write what hapend and return it, and in hope that they can fix it, if not u will get a brand new or the money back.
My TF101 works flaviously and it's something i wanted and even with custom rom its more better and funnier, so yeah, thats a hardware issue or some "wrong made tablet"
For the past few weeks I noticed I couldn't respond to posts unless I removed the keyboard and brought the button to the bottom of the screen.
Then I realised that area of the screen just did not respond to anything, like in contacts I couldn't select letters in that area.
I enabled screen touches and they were showing up but there was no response from the OS.
I did a search and one fix was to clear the cache in recovery, which worked for a few hours maybe.
The next step is factory reset which I'll do if it's a permanent fix, but I'd rather not otherwise if I really just need a new phone.
No root so any backup will not be a full one so I'd rather just start again on a new phone if that's what it takes.
Has anyone had this?
Mine is the international version.
Well, today I mentioned this to work mate as it's been rather annoying so I prepared a screen to show them the issue at the store and now it's been working ever since.
Up until at least yesterday it was still happening. Very confusing as I was going to bite the bullet and backup what I could and try a new phone as it doesn't seem like a widespread problem.
Part of Touch Screen not working
I have the same issue with my S7 Edge too. It's really annoying especially when you are typing a message and can't send it because that particular area of the screen is not responding to touch. Now I have to type in a message and close the keyboard just to bring the send button down and tap on it. The issue gets solved when i restart the device but the problem continues after a few hours of normal use. Does anyone have a solution to this , Please?
Ok, my phone did reboot last night so it will probably come back.
You have exactly the same symptoms as me.
My girlfriend has the AT&T version of this phone and she has had the same exact problem the past few weeks. Like someone above said, it's right where the send button is in the SMS app.
I wonder what this issue could be?
Sent from my SM-G935F using XDA-Developers mobile app
Well, you can blow me over with a feather as mine has been fine now for about three days, since I was about to show them in the store and ask for a new one.