My phone is android 6.0 and I've been using "TruPureXMM 2.9" ever since it first came out. I have a February 1, 2016 android security patch level and my system version is 24.11.18 clark_retus.retus.en.US retus
I had an older version of twrp so I just updated it to the latest one before attempting this ofc...
I tried flashing the latest RR and AICP and both give me boot loops and I always get this one problem where it says
"mount: failed to mount /dev/block/bootdevice/by-name
/modem at /firmware: Device or resource busy"
I'm not sure if this has anything to do with the bootloop though...
Going to recovery after seeing the bootloop I always get the "keep system read only?" prompt where i swipe to allow modification but i usually just restore back to my backup from there... i dont think allowing it and trying to boot again will get rid of the bootloop...
I followed the process of first doing a full wipe with twrp > flash rom > flash gapps > restart system
no idea what i'm doing wrong..
OppaiHeroStar said:
My phone is android 6.0 and I've been using "TruPureXMM 2.9" ever since it first came out. I have a February 1, 2016 android security patch level and my system version is 24.11.18 clark_retus.retus.en.US retus
...
I followed the process of first doing a full wipe with twrp > flash rom > flash gapps > restart system
no idea what i'm doing wrong..
Click to expand...
Click to collapse
1st - you need twrp 3.x+,
2nd - full wipe - format data, adv.wipe - all without micro sd.
3rd - flash rom, flash gapps(opengapps.org, ≤mini, arm64, 7.1)
Last Rr is for Nougat modem - you are on MM modem.
Flash RR 21.11.2017.
https://forum.xda-developers.com/mo...ial-resurrection-remix-v5-8-3-t3637204/page36
dzidexx said:
1st - you need twrp 3.x+,
2nd - full wipe - format data, adv.wipe - all without micro sd.
3rd - flash rom, flash gapps(opengapps.org, ≤mini, arm64, 7.1)
Last Rr is for Nougat modem - you are on MM modem.
Flash RR 21.11.2017.
https://forum.xda-developers.com/mo...ial-resurrection-remix-v5-8-3-t3637204/page36
Click to expand...
Click to collapse
The first 3 steps I've already done that since the beginning
Where can i get the nougat modem/is it possible to update to it? I guess that's the reason every single 7.1 custom rom I tried in the android development section gave me boot loops...
And could you link the 21.11.2017 version of RR? I'm looking at the download links for RR and I dont see one with that exact date
edit-just saw your edit
Custom roms for MM modem works better.
I fully wiped using TWRP, checked everything I possibly could except my micro SD card and I flashed RR-N-v5.8.5-20171121-clark-Final.zip then gapps arm64, 7.1 nano and it's still giving me boot loops. I'm using TWRP 3.2.1-0
im gonna try using gapps arm64 7.1 mini really quick since you said I should use that one and see if it boot loops... - Edit guess I was too optimistic thinking this would fix it
Bugs probably after flashing december RR.
Change twrp to 3.1.x, reboot twrp, change all partitions to ext4 - adv wipes - One by one - cache, system, data, reboot twrp.
Change back to f2fs - only cache & data, wipe all, flash what I wrote.
dzidexx said:
Bugs probably after flashing december RR.
Change twrp to 3.1.x, reboot twrp, change all partitions to ext4 - adv wipes - One by one - cache, system, data, reboot twrp.
Change back to f2fs - only cache & data, wipe all, flash what I wrote.
Click to expand...
Click to collapse
changed to 3.1.1-0 and did everything you said, still have boot loop...
when flashing this RR i still get this, not sure if it's a problem but thought I would just let you know
"mount: failed to mount /dev/block/bootdevice/by-name
/modem at /firmware: Device or resource busy"
OppaiHeroStar said:
changed to 3.1.1-0 and did everything you said, still have boot loop...
"mount: failed to mount /dev/block/bootdevice/by-name
/modem at /firmware: Device or resource busy"
Click to expand...
Click to collapse
It doesn`t matter.
Try another custom - LOS f.e.
If bootloop still will be - you should flash full stock.
Last MM for RetUs
dzidexx said:
It doesn`t matter.
Try another custom - LOS f.e.
If bootloop still will be - you should flash full stock.
Last MM for RetUs
Click to expand...
Click to collapse
I tried crDroidAndroid-7.1.2-20171119-clark-v3.8.3.zip and it still boot loops :\ I also already tried LineageOS and AICP before we started talking
I went back to my backup and it put me in a bootloop which never happened before but changing cache back to ext4 instead of f2fs fixed it..
OppaiHeroStar said:
when flashing this RR i still get this, not sure if it's a problem but thought I would just let you know
"mount: failed to mount /dev/block/bootdevice/by-name
/modem at /firmware: Device or resource busy"
Click to expand...
Click to collapse
A little late to chime in and this does not help with your current situation, but here's a little advice. I flash a lot of ROMs (how else am I going to test builds right?). This error happens all the time, BUT if you flash a ROM twice it should not show on the 2nd flash.
So flash order goes:
Wipe/Factory reset
Format data x3 (yes I format my data 3 times for every ROM)
Reboot
Wipe/Factory reset
ROM
ROM again
GAPPS
Wipe caches
Reboot
Do the Initial setup
Reboot before use
OPTIONAL Kernel (if its not already build in)
OPTIONAL Magisk (I never flash Magisk on a clean build but heck I'm expecting a NON boot most of the time anyways)
At this point I would flash the stock Nougat image via fastboot to get the device operational again... Then look at TWRP, root, or custom ROM.
acejavelin said:
At this point I would flash the stock Nougat image via fastboot to get the device operational again... Then look at TWRP, root, or custom ROM.
Click to expand...
Click to collapse
so should I just straight up flash the nougat image via fastboot from your thread here? https://forum.xda-developers.com/moto-x-style/general/xt1575-moto-x-pure-edition-factory-t3704142
i dont need to go back to mm stock or something first? I don't really have much knowledge about this.
OppaiHeroStar said:
so should I just straight up flash the nougat image via fastboot from your thread here? https://forum.xda-developers.com/moto-x-style/general/xt1575-moto-x-pure-edition-factory-t3704142
i dont need to go back to mm stock or something first? I don't really have much knowledge about this.
Click to expand...
Click to collapse
Correct... And verify everything is working properly before you flash TWRP, root, or take any OTA update.
acejavelin said:
Correct... And verify everything is working properly before you flash TWRP, root, or take any OTA update.
Click to expand...
Click to collapse
so i finished flashing that nougat firmware and looks like everything is working ok, does that mean I can try flashing custom roms after twrp now?
OppaiHeroStar said:
so i finished flashing that nougat firmware and looks like everything is working ok, does that mean I can try flashing custom roms after twrp now?
Click to expand...
Click to collapse
Boot TWRP (don't flash it) and make a full back, and I would recommend not talking any OTAs either.
Then knock yourself out... You can always get back to this state if things go badly.
acejavelin said:
Boot TWRP (don't flash it) and make a full back, and I would recommend not talking any OTAs either.
Then knock yourself out... You can always get back to this state if things go badly.
Click to expand...
Click to collapse
was finally able to flash a custom rom without bootloops!
thank you and everyone else here for the help I honestly really appreciate it
OppaiHeroStar said:
was finally able to flash a custom rom without bootloops!
thank you and everyone else here for the help I honestly really appreciate it
Click to expand...
Click to collapse
What custom did you flashed?
dzidexx said:
What custom did you flashed?
Click to expand...
Click to collapse
I tried out AICP, AOKP, and RR. All latest versions and they worked but for some reason my data doesn't work on any of those customs.
guess my happiness was short lol. Considering just staying stock now
OppaiHeroStar said:
I tried out AICP, AOKP, and RR. All latest versions and they worked but for some reason my data doesn't work on any of those customs.
guess my happiness was short lol. Considering just staying stock now
Click to expand...
Click to collapse
I'm not sure for others but RR - only 5.8.5-04.12 works with N modem.
Did you check/set access points properly?
All customs for N modem(I think) have problems with notification sound, so you can stay at stock.
dzidexx said:
I'm not sure for others but RR - only 5.8.5-04.12 works with N modem.
Did you check/set access points properly?
All customs for N modem(I think) have problems with notification sound, so you can stay at stock.
Click to expand...
Click to collapse
I'm using t-mobile and I've checked the access points, clicking on the one im using and hitting save doesn't fix it. Always getting a notification telling me to sign in to network. Not sure what else I can do. I'll give it a day since I had this kind of problem before when I switched sim cards and data didn't work until the next day
Edit - just went back to stock and my data doesn't work now either... just going to stay at RR now and hope my data fixes itself because my access point settings for tmobile should be correct since I looked it up on the official website..
Related
Hi,
So I have created this thread just because I can see many people creating new threads as after flashing CM 14.1, their phone doesn't boot up. So for all those who are going to flash CM 14.1 or have already flashed it and can't get it working, this thread is for you.
What you will need:
1. Rooted OnePlus X (Obviously)
2. Custom Recovery (TWRP recommended)
3. Latest CM 14.1 build
4. Arsenic Kernel or BlackReactor Kernel
So this is how you get CM 14.1 working on your OPX (make sure your battery is above 80% just to be sure that nothing will go wrong considering battery's point of view)
Make sure you have backed up everything before performing the following steps as the process will wipe your data completely. (I would recommend to take a Titanium backup of all user apps and then taking a nandroid backup of system and data)
1. Download the required files and place them in your SD Card or internal storage
2. Reboot your device into recovery
3. Go to wipe, and swipe to factory reset (Note! This will completely wipe all the data from your device including app data and SMS! This won't wipe the contacts but just to be safe, have a backup of all your contacts)
4. Go to Wipe again, and go to Advanced wipe, select the following partitions - System, Cache, Dalvik cache. Swipe to wipe (Note! Make sure you have a backup of the System as this will wipe the Operating System from your phone!) Although this step isn't necessary, I like to do it.
5. Go to install, and direct to the location where you have saved the CM 14.1 zip file and the kernel. Select the files, and swipe to flash.
6. If you want anything else in your system, direct to that location, select the zip file, and swipe to flash. (Note! You need not flash the SuperSU zip file as CM offers Root access in developer options)
7. Reboot your system and wait for it to boot.
Viola! Your device is now running official CM 14.1 nightly.
Hope this helps! ?
Downloads:
1. Latest CyanogenMod nightly - found here https://download.cyanogenmod.org/?device=onyx
You can have any version of the nightly as long as it is CM 14.1
2. Arsenic Kernel R32 (or R31) - http://forum.xda-developers.com/oneplus-x/development/kernel-arsenic-kernel-r2-t3422020
Open the above thread and follow the guide
OR
Black Reactor kernel v1.0 - http://forum.xda-developers.com/oneplus-x/development/kernel-blackreactor-kernel-oneplus-x-t3460989
-Reserved-
Good Evening, @aamodjoshi23 THX a Lot. You are my Hero. Finally it works.
greetings
If you're facing some Error 7 while trying to flash cm 14.1, you can try updating the bootloader following this
http://forum.xda-developers.com/showpost.php?p=69267239&postcount=2560
I used the Oxygen OS 3.13 full ROM as recommended, edited updater-script (following those instructions)
Immediately after flashing the OOS 3.13 rom, you don't have to reboot.
I immediately flashed twrp 3.0.3 original from https://dl.twrp.me/onyx/
I then rebooted into twrp 3.0.3 (using the reboot button in twrp, then bootloader)
Then I installed (in this order):
cm 14.1 (https://download.cyanogenmod.org/?device=onyx)
arsenic kernel (as recommended above)
opengapps
Not sure if this step is necessary, but I wanted to let twrp patch the rom to not overwrite twrp so I rebooted into twrp again (using reboot --> bootloader in twrp)
Then I used reboot --> system
First boot took a while, but now I have nougat!!
kenel zip every time
Do i need to flash the kenel zip every time I update the the cm 14.1 zip file?
allons-y said:
Do i need to flash the kenel zip every time I update the the cm 14.1 zip file?
Click to expand...
Click to collapse
Yes, as when you flash the CM 14.1 build, the kernel that is provided with the build is also flashed, and that is not supported. So you need to flash it every time you flash a CM 14.1 build, but if you want to flash any other build, something like CM 13.0, then you need not as the kernels provided in those are supported.
aamodjoshi23 said:
Yes, as when you flash the CM 14.1 build, the kernel that is provided with the build is also flashed, and that is not supported. So you need to flash it every time you flash a CM 14.1 build, but if you want to flash any other build, something like CM 13.0, then you need not as the kernels provided in those are supported.
Click to expand...
Click to collapse
Hi,
I have a very specific problem. I rooted my Oneplus x few months back and everything was fine. I use to get update notifications and after downloading it use to update automatically. But since last 2 months i download the update files but it takes me to recovery and then i cant find the zip file to flash/install. (i also started using external sd card two months back, but not sure if it has to do anything with this). I tried searching a solution on web - tried checking 'system' under Mount tab, installed an app for auto update and some more but no use. I even connected my phone in recovery mode to laptop and copied the zip file to internal memory but while flashing it gave error.
Now i am not sure what the problem is. Do i need to update my recovery or something else. Pls help.
shashanksachdeva said:
Hi,
I have a very specific problem. I rooted my Oneplus x few months back and everything was fine. I use to get update notifications and after downloading it use to update automatically. But since last 2 months i download the update files but it takes me to recovery and then i cant find the zip file to flash/install. (i also started using external sd card two months back, but not sure if it has to do anything with this). I tried searching a solution on web - tried checking 'system' under Mount tab, installed an app for auto update and some more but no use. I even connected my phone in recovery mode to laptop and copied the zip file to internal memory but while flashing it gave error.
Now i am not sure what the problem is. Do i need to update my recovery or something else. Pls help.
Click to expand...
Click to collapse
First of all we need more info about your current ROM recovery etc.
Fap4k said:
First of all we need more info about your current ROM recovery etc.
Click to expand...
Click to collapse
I installed CM 13.0-20160928-NIGHTLY-onyx and the recovery is: TWRP v2.8.7.0 | blu_spark r8
I'll be grateful for a solution.
shashanksachdeva said:
I installed CM 13.0-20160928-NIGHTLY-onyx and the recovery is: TWRP v2.8.7.0 | blu_spark r8
I'll be grateful for a solution.
Click to expand...
Click to collapse
In October oneplus updated to 6.0.1 officially i.e OOS 3 it brings new bootloader to the device as you are using old recovery you can't flash new update..so you need to upgrade to latest bootloader by following thread available in general section or you can flash stock recovery and upgrade to latest OOS and flash whatever you want to flash..I recommend you to see how to upgrade bootloader in general section if you are planning to flash custom ROMs or if want to flash latest OOS then simply flash stock recovery and upgrade. onece you updated to OOS 3 after that you can flash new official twrp 3.0.3.0 from its official page.
Edit: for old bootloader you need stock 5.1.1 recovery..which is not available in official oneplus download page..so just follow below link
https://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
Fap4k said:
In October oneplus updated to 6.0.1 officially i.e OOS 3 it brings new bootloader to the device as you are using old recovery you can't flash new update..so you need to upgrade to latest bootloader by following thread available in general section or you can flash stock recovery and upgrade to latest OOS and flash whatever you want to flash..I recommend you to see how to upgrade bootloader in general section if you are planning to flash custom ROMs or if want to flash latest OOS then simply flash stock recovery and upgrade. onece you updated to OOS 3 after that you can flash new official twrp 3.0.3.0 from its official page.
Edit: for old bootloader you need stock 5.1.1 recovery..which is not available in official oneplus download page..so just follow below link
https://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
Click to expand...
Click to collapse
I made a blunder. I read somewhere to upgrade TWRP to 3.0.3 and after doing that now i just can't access the recovery mode. When i try to boot in recovery mode the screen gets stuck with One+ logo. Then I even tried to Factory reset and the phone rebooted to the same screen stuck with logo. I longed pressed the power button and it got switched off and then again turned it on. It started and is working fine but I cant factory set it, nor cant I access recovery to flash anything.
shashanksachdeva said:
I made a blunder. I read somewhere to upgrade TWRP to 3.0.3 and after doing that now i just can't access the recovery mode. When i try to boot in recovery mode the screen gets stuck with One+ logo. Then I even tried to Factory reset and the phone rebooted to the same screen stuck with logo. I longed pressed the power button and it got switched off and then again turned it on. It started and is working fine but I cant factory set it, nor cant I access recovery to flash anything.
Click to expand...
Click to collapse
This is because you flashed wrong recovery twrp 3.0.3 is for new bootloader and you are on old bootloader..that's why it all happened..so you just need to flash old recovery..then follow given link to upgrade bootloader and recovery.
shashanksachdeva said:
I made a blunder. I read somewhere to upgrade TWRP to 3.0.3 and after doing that now i just can't access the recovery mode. When i try to boot in recovery mode the screen gets stuck with One+ logo. Then I even tried to Factory reset and the phone rebooted to the same screen stuck with logo. I longed pressed the power button and it got switched off and then again turned it on. It started and is working fine but I cant factory set it, nor cant I access recovery to flash anything.
Click to expand...
Click to collapse
I've got a good news and bad news for you.
The bad news is, no one has the older 2.8.x TWRP image files and there are no threads that have the download links for the older version of TWRP. So you're stuck and you have lost your recovery. You have lost everything... Having no recovery means you can't do a lot of things like factory reset, any wipe of a partition, you won't be able to update your system, you won't be able to flash zip files to enhance your experience and many more... I'm sorry my friend...
The good news is, I've got you covered. I had saved the older TWRP so that if anyone one day would need that recovery image, I would be able to help them.
Download the older TWRP from here : https://drive.google.com/file/d/0B2Ms-zaNd3SiTmpxX0UtYUV2R1k/view?usp=drivesdk
Flash it. You should get back your recovery.
e: unknown command (log)
e: unknown command (log)
am not able to make my device android 7.0 running...
i tryed and install kernal after that but no luck, stuck on boot only 1 plus logo will appear, please recommend any solution.
Plush suthar said:
e: unknown command (log)
e: unknown command (log)
am not able to make my device android 7.0 running...
i tryed and install kernal after that but no luck, stuck on boot only 1 plus logo will appear, please recommend any solution.
Click to expand...
Click to collapse
Which ROM you are on currently?
If possible post screenshot of about device in setting.
Fap4k said:
Which ROM you are on currently?
If possible post screenshot of about device in setting.
Click to expand...
Click to collapse
using resurrection remix marshmallow 6.0...
Plush suthar said:
using resurrection remix marshmallow 6.0...
Click to expand...
Click to collapse
Did you ever updated bootloader?
If not than update your bootloader and install latest recovery!!
Plush suthar said:
e: unknown command (log)
e: unknown command (log)
am not able to make my device android 7.0 running...
i tryed and install kernal after that but no luck, stuck on boot only 1 plus logo will appear, please recommend any solution.
Click to expand...
Click to collapse
By stuck on boot, I didn't know you meant that it showed only the OnePlus logo and not even powered by Android.
In that case, follow this guide to update your bootloader :
https://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
I bought this phone used and the person who had it before me it rooted and installed some of different ROMs on it. After getting my used moto x pure 2015 running android 6.0. I booted it up and tested all the functions (including downloading a few apps) Wi-Fi, camera, audio/charging jacks ext. Everything worked fine. So did normal factory reset (not using TWRP) just to make sure everything was clean before using it as my daily. Then, (BUM BUM BUM!) when I tried to start downloading all my apps. None of them would download even though the Wi-Fi was working. Error 492 I think.
I started trying custom ROMs because I was having two big issues (apps not downloading and incoming call not bringing up accept/decline screen) with my stock rom. and wanted to fix those issues with a fresh stock image.
This is all new to me and has not been as easy as anticipated. If anyone knows a clean factory image I could flash or a fail proof fix to error 492 that would be helpful. I really just want to return to fully working Motorola stock android, but the files I have used haven’t fixed the issue. I have searched for a factory image without finding one…
Is there a way to flash the Motorola image through TRWP?
Otherwise, maybe you can help me with my flashing method, and maybe tell me what I am doing wrong. I tried to flash multiple stock images all with the same issue. I have also tried to flash Resurrection Remix, and Brocken OS, both having resulted in a bootloop. I am starting to think I have done something wrong. The steps I have taken so far have been these:
My bootloader is unlocked status code 3.
My phone is not rooted. Do I need root?
First I downloaded adb and fastboot.
Then I flashed TWRP (3.0.2).
I never installed the official Motorola stock image because flashing it from fast boot wouldn’t work and it couldn’t be flashed with TWRP because it is a .gz not a .zip. (I knew a .gz needs to be flashed with fastboot but I knew TWRP was easer so I didn’t fuss with it)
After flashing TWRP to my phone, I downloaded (yes, I checked the md5) the various ROMs to my computer then transfered them to my phone via micro SD card.
Here are the file’s names if that matters:
moto_x_pure_edition_stock_x1575_mphs24.49-18-3_v1-odexed
(booted and Wi-Fi but play store won’t download apps)
moto_x_pure_edition_stock_x1575_mph24.49-18_v1-odexed
(booted but no Wi-Fi)
Broken-v4.9.1-clark-6.0.1-OFFICIAL-20160824 (with Broken_gapps_lp5.1.x_09172015)
(Brocken was the only non-stock that got past boot, but I still couldn’t get past set up without an error and never made it to the system.)
ResurrectionRemix-N-v5.8.0-20161220-clark (7.1 gapps failed to flash but I booted it anyway.)
(boot loop after both of my tries)
I got Wi-Fi working on one of the above stock ROMs (so I KNOW it works) but couldn’t even turn Wi-Fi on in all the others.
The method I used to flash all of the above files in TWRP was:
Wipe
Full wipe (davlik cache, data, system, cache)
(used for RR and Brocken)
Factory reset (using TWRP) (davlik cache, data , cache)
Used for the stock ROMs or even after flashing .zip file I got the error: no OS installed.
Install
Select file of ROM flash (gapps if needed) and flash
I can’t remember which ones but on some of them after flashing I again did a factory reset.
Then I rebooted
Thanks for reading. Sorry it was so long. I tried to add as much useful information as possible. Hopefully someone smarter than me will see my error(s) and help me get my phone into fully working order.
cont.
I really just want to return to fully working Motorola stock android, but the files I have used haven’t fixed the issue. I have searched for a factory image without finding one…
Is there a way to flash the Motorola image through TRWP?
Otherwise maybe you can help me out with my flashing method and maybe tell me what I am doing wrong. I tried to flash multiple stock images all with the same issue. I have also tried to flash Resurrection Remix, and Brocken OS, both having resulted in a bootloop. I am starting to think I have done something wrong. The steps I have taken so far have been these:
My bootloader is unlocked status code 3.
My phone is not rooted. Do I need root?
First I downloaded adb and fastboot.
Then I flashed TWRP (3.0.2).
I never installed the official Motorola stock image because flashing it from fast boot wouldn’t work and it couldn’t be flashed with TWRP because it is a .gz not a .zip. (I knew a .gz needs to be flashed with fastboot but I knew TWRP was easer so I didn’t fuss with it)
After flashing TWRP to my phone, I downloaded (yes, I checked the md5) the various ROMs to my computer then transfered them to my phone via micro SD card.
Here are the file’s names if that matters:
moto_x_pure_edition_stock_x1575_mphs24.49-18-3_v1-odexed
(booted and Wi-Fi but play store won’t download apps)
moto_x_pure_edition_stock_x1575_mph24.49-18_v1-odexed
(booted but no Wi-Fi)
Broken-v4.9.1-clark-6.0.1-OFFICIAL-20160824 (with Broken_gapps_lp5.1.x_09172015)
(Brocken was the only non-stock that got past boot, but I still couldn’t get past set up without an error and never made it to the system.)
ResurrectionRemix-N-v5.8.0-20161220-clark (7.1 gapps failed to flash but I booted it anyway.)
(boot loop after both of my tries)
I got Wi-Fi working on one of the above stock ROMs (so I KNOW it works) but couldn’t even turn Wi-Fi on in all the others.
The method I used to flash all of the above files in TWRP was:
Wipe
Full wipe (davlik cache, data, system, cache)
(used for RR and Brocken)
Factory reset (using TWRP) (davlik cache, data , cache)
Used for the stock ROMs or even after flashing .zip file I got the error: no OS installed.
Install
Select file of ROM flash (gapps if needed) and flash
I can’t remember which ones but on some of them after flashing I again did a factory reset.
Then I rebooted
Thanks for reading. Sorry it was so long. I tried to add as much useful information as possible. Hopefully someone smarter than me will see my error(s) and help me get my phone into fully working order.
I think this thread will help you: https://forum.xda-developers.com/showthread.php?t=3489110
Sent from my XT1572 using Tapatalk
Install stock firmware via fastboot... if that dont fix the issue, install TWRP make a full wipe, FULL, and install the stock firmware again, eventualy that sould fix the issue.
RK2116 said:
Install stock firmware via fastboot... if that dont fix the issue, install TWRP make a full wipe, FULL, and install the stock firmware again, eventualy that sould fix the issue.
Click to expand...
Click to collapse
I'm having a similar issue. Tried the TruPure rom but I want to switch back to stock. If I do a full wipe, would I be able to use the files that Motorola provides on their website and flash those throught fastboot? Or through TWRP? Any chance you have a link to a guide on how to do the latter option (installing through TWRP)? I'm just trying to get my device back to 100% stock so that I can receive OTA.
cdiaz8 said:
I'm having a similar issue. Tried the TruPure rom but I want to switch back to stock. If I do a full wipe, would I be able to use the files that Motorola provides on their website and flash those throught fastboot? Or through TWRP? Any chance you have a link to a guide on how to do the latter option (installing through TWRP)? I'm just trying to get my device back to 100% stock so that I can receive OTA.
Click to expand...
Click to collapse
Odexed one, install with TWRP, full wipe before doing that, no GApps, just ROM, them, install stock recovery vía fastboot. After that you Will be stock with OTAs.
https://forum.xda-developers.com/mo...t/rom-marshmallow-6-0-september-2016-t3536120
RK2116 said:
Odexed one, install with TWRP, full wipe before doing that, no GApps, just ROM, them, install stock recovery vía fastboot. After that you Will be stock with OTAs.
https://forum.xda-developers.com/mo...t/rom-marshmallow-6-0-september-2016-t3536120
Click to expand...
Click to collapse
Thank you for sharing that link. I think I get it but it seems too easy considering what I've tried so far. Just to make sure I get it:
I should download the odexed rom, go to twrp and wipe data, cache and dalvik then flash the odexed rom through the install function? And thats it? I've literally tried a ton of stuff so if this takes care of it, this is great!
cdiaz8 said:
Thank you for sharing that link. I think I get it but it seems too easy considering what I've tried so far. Just to make sure I get it:
I should download the odexed rom, go to twrp and wipe data, cache and dalvik then flash the odexed rom through the install function? And thats it? I've literally tried a ton of stuff so if this takes care of it, this is great!
Click to expand...
Click to collapse
Yes, also wipe system, make a backup before If you want, but remember, for the OTAs support you need yo flash the stock recovery via fastboot. Good luck.
RK2116 said:
Yes, also wipe system, make a backup before If you want, but remember, for the OTAs support you need yo flash the stock recovery via fastboot. Good luck.
Click to expand...
Click to collapse
This got me back to stock! You are the real MVP.
So I remember seeing a recovery.img file in the factory image that motorola posted on its site. Does it have to be a specific stock recovery or do I need a specific one to match with the file I just installed?
thanks again
cdiaz8 said:
This got me back to stock! You are the real MVP.
So I remember seeing a recovery.img file in the factory image that motorola posted on its site. Does it have to be a specific stock recovery or do I need a specific one to match with the file I just installed?
thanks again
Click to expand...
Click to collapse
Just a stock one, if Motorola have one use that.
RK2116 said:
Just a stock one, if Motorola have one use that.
Click to expand...
Click to collapse
So I'm on stock build 49-18-8 and flashed the recovery from 49-18-3. I went into fastboot and selected recovery. I got the android character with an !
I then did the power button and volume up and got into stock android recovery. Am I supposed to see the android character with ! each time I try to reach the recovery menu? Just wondering if I did this correctly.
Thanks again for pointing me to these resources!
cdiaz8 said:
So I'm on stock build 49-18-8 and flashed the recovery from 49-18-3. I went into fastboot and selected recovery. I got the android character with an !
I then did the power button and volume up and got into stock android recovery. Am I supposed to see the android character with ! each time I try to reach the recovery menu? Just wondering if I did this correctly.
Thanks again for pointing me to these resources!
Click to expand...
Click to collapse
Yes.
I have bricked my phone the issue I am facing is I don't own and can't afford an SD card to sideload the rom onto my phone is there a 7.0 stock based rom that is flashable via TWRP or? Really need some ideas need to fix this device.
If you have access to TWRP, then plug your phone into your computer and it'll mount your internal sdcard. Copy any Rom you want onto it and flash as normal (remember to wipe cache and dalvik!). If you get the "error 7" output, edit your updater script and do it again. If you get a bootloop after successfully flashing, flash the latest magisk zip (I assume you use root?) or noverity file if not.
wang1chung said:
If you have access to TWRP, then plug your phone into your computer and it'll mount your internal sdcard. Copy any Rom you want onto it and flash as normal (remember to wipe cache and dalvik!). If you get the "error 7" output, edit your updater script and do it again. If you get a bootloop after successfully flashing, flash the latest magisk zip (I assume you use root?) or noverity file if not.
Click to expand...
Click to collapse
I use root and both but when I decided to remove root and was looking at installing another rom it failed now I don't see any twrp flashable roms for my device would you know of any? I tried stock but it can't be flashed from TWRP sadly I have no bootable rom at the moment.
@mastermarkofroms
EVERY Rom that can be flashed through stock recovery can be flashed through TWRP.
....all you need to do is edit the updater script as I said above. Give it a shot
Edit: you softbricked your phone removing root? Just perform a factory reset, you'll lose your personal data but it'll boot. Remember to wipe cache and dalvik.
wang1chung said:
@mastermarkofroms
EVERY Rom that can be flashed through stock recovery can be flashed through TWRP.
....all you need to do is edit the updater script as I said above. Give it a shot
Edit: you softbricked your phone removing root? Just perform a factory reset, you'll lose your personal data but it'll boot. Remember to wipe cache and dalvik.
Click to expand...
Click to collapse
I have never modified that before what would I need to modify to get it working?
@mastermarkofroms
Open the Rom archive and edit the updater script (/META-INF/com/google/android/updater-script) to remove the first 7 lines (sometimes more or less) of code, so the script starts at "ui_print....." now. Save it, and load it onto your sdcard and flash.
wang1chung said:
@mastermarkofroms
Open the Rom archive and edit the updater script (/META-INF/com/google/android/updater-script) to remove the first 7 lines (sometimes more or less) of code, so the script starts at "ui_print....." now. Save it, and load it onto your sdcard and flash.
Click to expand...
Click to collapse
I will give that a shot turns out a factory reset did not start up device so this is my last choice as I can still access recovery
edit: so after modifying the script it did flash without an issue but it still has failed to boot reloading the bootloader.
Flash magisk or the no verify file
wang1chung said:
Flash magisk or the no verify file
Click to expand...
Click to collapse
the no verify file was flashed when I rooted this device
Which Rom did you flash?
You performed a factory reset and wiped dalvik and cache after flashing? How long did you wait after rebooting? Usually takes 5-10min on the first boot.
Edit: you flashed the no verity file after flashing the rom today, right?
wang1chung said:
Which Rom did you flash?
You performed a factory reset and wiped dalvik and cache after flashing? How long did you wait after rebooting? Usually takes 5-10min on the first boot.
Edit: you flashed the no verity file after flashing the rom today, right?
Click to expand...
Click to collapse
I tried flashing Unofficial LineageOS 14.1 for ZE552KL by basenode with opengapps it just failed to flash not an error 7 it actually gave me a wrong device error although I know I have the ze552kL model. and since then it don' boot it tries to you see the asus logo and it just restarts again in a boot loop
Flash magisk right now, then wipe cache and dalvik
Go back asus nougat 7.0 -> factory reset -> flash LOS 14.1 -> flash gapps -> done. Flash magisk if you want.
Edit: when you go back asus rom and face bootloop then just flash no-verity file, everything will work like normal .
[email protected]@ said:
Go back asus nougat 7.0 -> factory reset -> flash LOS 14.1 -> flash gapps -> done. Flash magisk if you want.
Edit: when you go back asus rom and face bootloop then just flash no-verity file, everything will work like normal .
Click to expand...
Click to collapse
Thanks for the info will give that a shot as soon as I do get home from work. Just ablittle annoyed that first phone I have ever bricked
[email protected]@ said:
Go back asus nougat 7.0 -> factory reset -> flash LOS 14.1 -> flash gapps -> done. Flash magisk if you want.
Edit: when you go back asus rom and face bootloop then just flash no-verity file, everything will work like normal .
Click to expand...
Click to collapse
Any ideas where I can find the no verity file? I dont see it on the forum unless I am blind
mastermarkofroms said:
Any ideas where I can find the no verity file? I dont see it on the forum unless I am blind
Click to expand...
Click to collapse
Here https://forum.xda-developers.com/ze...20kl-ota-upgrade-doesnt-t3706856/post74571792
[email protected]@ said:
Here https://forum.xda-developers.com/ze...20kl-ota-upgrade-doesnt-t3706856/post74571792
Click to expand...
Click to collapse
Problem solved back on stock thanks for all the help @everyone
mastermarkofroms said:
Problem solved back on stock thanks for all the help @everyone
Click to expand...
Click to collapse
I thought you ask for the LOS rom.
I did the thing is had it installed and everything but my phone kept freezing and lagging with it not sure why as I had nothing on there that would of caused it. But the lag once I got it working was just unbearable for me
mastermarkofroms said:
I did the thing is had it installed and everything but my phone kept freezing and lagging with it not sure why as I had nothing on there that would of caused it. But the lag once I got it working was just unbearable for me
Click to expand...
Click to collapse
Which rom?
Firstly, my phone isn't hard-bricked. I'm able to load different versions of the TWRP recovery and access Fastboot without any problems. I'm also pretty comfortable using adb to push, sideload, access fastboot, recovery , etc. so please feel free to throw out any suggestions that might help me resolve my issue. (Note:I'm unable to find the stock recovery on OnePlus's support page anymore, I recall they always had the option to download the stock recovery just below the download option for the stock ROM, so I haven't been able to try sideloading after formatting with the stock recovery.)
My OnePlus 5 was running stock Oreo and I'd been meaning to upgrade to Lineage 16.0 (Pie) or any other Pie ROM really. I booted into TWRP (3.2.3-0 - Oreo firmware) and wiped everything other than USB storage and formatted data too as my previous Oreo installation was encrypted. Then, I downloaded codeworkxx's 9.0.3 firmware for OnePlus 5 and pushed it to my phone using adb. I flashed the firmware successfully, rebooted into Bootloader/fastboot; and flashed the Android Pie version of TWRP recovery ( https://sourceforge.net/projects/cheeseburgerdumplings/files/16.0/cheeseburger/ ) and was able to successfully boot back into the recovery. Since then, I've tried to flash multiple different Pie ROMs (Pixel Experience, Lineage 16.0, stock OOS official build - 9.0.3 , Beta OOS build OpenBeta26) (clean flashing always) but always ended up with a bootloop with the boot animations in all the ROMs. I've even tried flashing them with Magisk-v18.0 but that doesn't help either. I've waited for 15 min with each boot for the different ROM's (ending up in bootloops) and on rebooting back to TWRP, I've always found that irrespective of ROMs, the only folder that's created in Internal Storage is 'obb' and it is an empty folder. I've even tried sideloading OOS 9.0.3 (official build) via TWRP and that still ends up in a bootloop with the obb folder in Internal Storage being the only thing created. Also, flashing the boot.img recovery in the stock ROM zip files leads to a blank screen with a white LED that tries to install Qualcom drivers, so I just reflashed TWRP and am back to where I started.
That pretty much sums up my problem here. Kindly throw suggestions at me to help fix my problem' I've searched the forums but most of the bootloop issues I've found and read are about unsuccessful firmware flashes (not the case with me as I've explained above) or dirty flashes (again, not the case with me as I always cleanflash).
Thanks!
You should be focusing on getting stock OOS back on before trying custom rom. Have you tried rolling back to 5.1.7 Oreo? Sometime it better to go back to square 1 and try again.
Z-Blade said:
You should be focusing on getting stock OOS back on before trying custom rom. Have you tried rolling back to 5.1.7 Oreo? Sometime it better to go back to square 1 and try again.
Click to expand...
Click to collapse
Thank you for replying!
I successfully flashed the 5.1.7 firmware and Oreo-TWRP-recovery and was able to install Lineage OS 15.1 and boot it up properly. I'm unable to find a link for previous versions of OOS to test whether or not 5.1.7 would work. Do you know where I can find a link?
Thanks again!
BigTurboSkipper said:
Thank you for replying!
I successfully flashed the 5.1.7 firmware and Oreo-TWRP-recovery and was able to install Lineage OS 15.1 and boot it up properly. I'm unable to find a link for previous versions of OOS to test whether or not 5.1.7 would work. Do you know where I can find a link?
Thanks again!
Click to expand...
Click to collapse
It's within the guides section https://forum.xda-developers.com/oneplus-5/how-to/oneplus-5-mirrors-official-oxygen-os-t3628190
strongst said:
It's within the guides section https://forum.xda-developers.com/oneplus-5/how-to/oneplus-5-mirrors-official-oxygen-os-t3628190
Click to expand...
Click to collapse
Thanks!
So the Lineage 15.1 flash worked fine but OOS 5.1.7 still leaves me with a bootloop and the obb folder as detailed in my first post. I'm unsure as to how to proceed.
BigTurboSkipper said:
Thanks!
So the Lineage 15.1 flash worked fine but OOS 5.1.7 still leaves me with a bootloop and the obb folder as detailed in my first post. I'm unsure as to how to proceed.
Click to expand...
Click to collapse
What was your LAST stock oxygenOS version that was installed your device prior to 5.1.7?
strongst said:
What was your LAST stock oxygenOS version that was installed your device prior to 5.1.7?
Click to expand...
Click to collapse
I can't recall exactly, but it was most probably OB23/24 (Oreo)
BigTurboSkipper said:
I can't recall exactly, but it was most probably OB23/24 (Oreo)
Click to expand...
Click to collapse
Can you please try to flash 5.1.4 stock oxygenOS rom and the 5.1.7 after it, then magisk and reboot to the os?
Make sure you have an old Oreo compatible recovery like this https://drive.google.com/file/d/1DrEMydZfQxC_eWx1W-OlASo8H7okXNTQ/view?usp=drivesdk
strongst said:
Can you please try to flash 5.1.4 stock oxygenOS rom and the 5.1.7 after it, then magisk and reboot to the os?
Make sure you have an old Oreo compatible recovery like this https://drive.google.com/file/d/1DrEMydZfQxC_eWx1W-OlASo8H7okXNTQ/view?usp=drivesdk
Click to expand...
Click to collapse
Successfully flashed but still results in a bootloop
BigTurboSkipper said:
Thanks!
So the Lineage 15.1 flash worked fine but OOS 5.1.7 still leaves me with a bootloop and the obb folder as detailed in my first post. I'm unsure as to how to proceed.
Click to expand...
Click to collapse
Lineage 15.1 (official) boots successfully but without radios working... I tried reflashing Firmware-5.1.7 but that does not help; not sure how to fix this. Could it be a firmware issue with installing Pie ROMs? But then again, OOS Oreo doesn't boot either - still ends up in a bootloop
My only suggestion ...
BigTurboSkipper said:
Lineage 15.1 (official) boots successfully but without radios working... I tried reflashing Firmware-5.1.7 but that does not help; not sure how to fix this. Could it be a firmware issue with installing Pie ROMs? But then again, OOS Oreo doesn't boot either - still ends up in a bootloop
Click to expand...
Click to collapse
Greetings! I got your private message, but I haven't read it yet. Sorry, very busy today. However, I can make the following suggestion to get your device back into original working order.
Have a look at this link on xda. It's for an unbrick tool, which I've used numerous times with great success.
https://forum.xda-developers.com/oneplus-5/how-to/unbrick-tool-oneplus-5-t3648169
This tool will put your device back into its original condition, with original OOS.
Let me know if it works for you.
Peter
BigTurboSkipper said:
Lineage 15.1 (official) boots successfully but without radios working... I tried reflashing Firmware-5.1.7 but that does not help; not sure how to fix this. Could it be a firmware issue with installing Pie ROMs? But then again, OOS Oreo doesn't boot either - still ends up in a bootloop
Click to expand...
Click to collapse
OxygenOS also needs a formatted internal storage, otherwise bootloop will pop up
strongst said:
OxygenOS also needs a formatted internal storage, otherwise bootloop will pop up
Click to expand...
Click to collapse
Definitely! I've always been clean flashing ROMs (Wiping Internal Storage, Data, System, Dalvik Cache, Cache + Wiping/Formatting Data to factory reset ) for each trial!
BigTurboSkipper said:
Definitely! I've always been clean flashing ROMs (Wiping Internal Storage, Data, System, Dalvik Cache, Cache + Wiping/Formatting Data to factory reset ) for each trial!
Click to expand...
Click to collapse
Wiping system, data, cache, Installing 5.1.4, then magisk, then format internal storage, then boot os should not cause a bootloop
What's your twrp recovery? Did you tried mine?
strongst said:
Wiping system, data, cache, Installing 5.1.4, then magisk, then format internal storage, then boot os should not cause a bootloop
What's your twrp recovery? Did you tried mine?
Click to expand...
Click to collapse
That's exactly what I'm doing. I've tried using codeworkxx 's versions, blu_spark TWRP versions and yours too!
PeterGuru said:
Greetings! I got your private message, but I haven't read it yet. Sorry, very busy today. However, I can make the following suggestion to get your device back into original working order.
Have a look at this link on xda. It's for an unbrick tool, which I've used numerous times with great success.
https://forum.xda-developers.com/oneplus-5/how-to/unbrick-tool-oneplus-5-t3648169
This tool will put your device back into its original condition, with original OOS.
Let me know if it works for you.
Peter
Click to expand...
Click to collapse
Thank you for replying!
The tool doesn't detect my device whatsoever - I have system-wide adb & fastboot set up (to use from any folder or path) yet the device is not detected in fastboot mode or recovery mode.
How do you use it?
Thanks!
BigTurboSkipper said:
Thank you for replying!
The tool doesn't detect my device whatsoever - I have system-wide adb & fastboot set up (to use from any folder or path) yet the device is not detected in fastboot mode or recovery mode.
How do you use it?
Thanks!
Click to expand...
Click to collapse
You need to put your device into MSM Download mode. It's simple. Power off your device. Press and hold the Volume UP key for about 8-10 seconds and, while continuing to hold the Volume UP key, plug in your device to your computer via USB. Open the MSM Tool and press Start.
That's it.
It takes about 3-5 minutes for the tool to complete the unbrick process.
Peter
Thank you! I was able to successfully use the unbrick tool to reset to OOS 4.5.8 Nougat. I'm going to try stepping all the way up to Pie now!
For the past 24+ hours I've been trying to flash a few custom roms on my UNLOCKED BOOTLOADER OP6T, but the phone TURNS OFF a few seconds after the boot sequence/animation.
I've read about the A/B slots and tried the Roms' flashing instructions, along with a few suggestions from others, but I cannot get any Custom Rom on my phone...
Here are the steps I've taken to flash (a few times I tried different things that I'll put in parenthesis). Is there anything ya'll see that I'm doing wrong?:
Starting from OOS 10.3.2 Fastboot Recovery and all required files on an OTG USB Drive
fastboot to TWRP....img
Confirmed I'm on Slot A
Wipe Data/Dalvik
Install OOS...zip (10.3.2)
Install TWRP...zip (3.3.1.32)
Reboot Recovery
(Format Data)
Confirmed I'm on Slot B
Install OOS...zip (10.3.2)
Install TWRP...zip (3.3.1.32)
Reboot Recovery
Confirmed I'm on Slot A
Install Xtended (v8 4/13)
(Wipe Data/Cache)
Install TWRP...zip (3.3.1.32)
Reboot Recovery
Confirmed I'm on Slot B
Install Xtended (v8 4/13)
(Wipe Data/Cache)
Install TWRP...zip (3.3.1.32)
Reboot Recovery
Confirmed I'm on Slot A
Install GAPPS (Arm64 10.0 Nano)
(Format Data)
Reboot System
My Guide for Lineage, however it will work for most AOSP based ROMs.
I assume you arent manually switching slots. Don't, there is no need, in fact dont worry about it. Slots will switch automatically after flashing a ROM when you reboot recovery. There is no cache partition, stop wiping this, its not doing anything. There are two slots, but only one data partition that is shared, there isnt a reason to keep wiping it.
On most instructions adding or removing steps will make things not work. Unfortunately for this device there is a lot of out dated information and information that just doesnt work. My guide has been tested with 10.3.3, and the latest version of LOS, however if you have a T-Mobile 6T you are on your own. (I have a regular 6T)
OhioYJ said:
My Guide for Lineage, however it will work for most AOSP based ROMs.
I assume you arent manually switching slots. Don't, there is no need, in fact dont worry about it. Slots will switch automatically after flashing a ROM when you reboot recovery. There is no cache partition, stop wiping this, its not doing anything. There are two slots, but only one data partition that is shared, there isnt a reason to keep wiping it.
On most instructions adding or removing steps will make things not work. Unfortunately for this device there is a lot of out dated information and information that just doesnt work. My guide has been tested with 10.3.3, and the latest version of LOS, however if you have a T-Mobile 6T you are on your own. (I have a regular 6T)
Click to expand...
Click to collapse
Thanks for the comment! I just followed your guide, but still seeing the boot animation for a few seconds, then the phone vibrates and turns off.
For kicks, I decided to Format Data and I see the boot animation longer, all the way to the end when it's about to start Android, but then it vibrates and shuts off. Strange.
I'm thinking there is something different about my phone... It's a global, unlocked version and I've rooted/flashed hundreds of roms over the years on various devices, so all of this should be a piece of cake................. Thanks!
oooscasianooo said:
Thanks for the comment! I just followed your guide, but still seeing the boot animation for a few seconds, then the phone vibrates and turns off.
For kicks, I decided to Format Data and I see the boot animation longer, all the way to the end when it's about to start Android, but then it vibrates and shuts off. Strange.
I'm thinking there is something different about my phone... It's a global, unlocked version and I've rooted/flashed hundreds of roms over the years on various devices, so all of this should be a piece of cake................. Thanks!
Click to expand...
Click to collapse
Have you tried without Gapps?
After the shutdown go back to twrp and extract the content of /sys/fs/pstore/* and upload the files here.
onliner said:
After the shutdown go back to twrp and extract the content of /sys/fs/pstore/* and upload the files here.
Click to expand...
Click to collapse
Thanks. I actually gave up and setup stock OOS again, so it took a while to get a TWRP backup, etc. etc.
So after the backup, I installed Xtended + TWRP, reboot to recovery, installed Xtended + TWRP, wiped dalvik, and reboot to system.
Boot animation shut down issue as usual.
Afterwards, I copied the pstore folder (attached zip).
Thanks!
onliner said:
After the shutdown go back to twrp and extract the content of /sys/fs/pstore/* and upload the files here.
Click to expand...
Click to collapse
Anything in the logs I can look for?
This is driving me crazy. I flashed MIUI just fine (because it had the .bat file that does everything for you). Essentially it's doing the same thing as flashing OOS & Rom on A/B, right?
Just tried flashing the newest Xtended Rom (May 11th), same issue. Phone vibrates and completely turns off while the boot animation is running.
OhioYJ said:
My Guide for Lineage, however it will work for most AOSP based ROMs.
I assume you arent manually switching slots. Don't, there is no need, in fact dont worry about it. Slots will switch automatically after flashing a ROM when you reboot recovery. There is no cache partition, stop wiping this, its not doing anything. There are two slots, but only one data partition that is shared, there isnt a reason to keep wiping it.
On most instructions adding or removing steps will make things not work. Unfortunately for this device there is a lot of out dated information and information that just doesnt work. My guide has been tested with 10.3.3, and the latest version of LOS, however if you have a T-Mobile 6T you are on your own. (I have a regular 6T)
Click to expand...
Click to collapse
If you have a TMobile 6t I can confirm I have had to manually change the slots during the flashing process to get custom ROMs installed.
mrmcshagbag said:
If you have a TMobile 6t I can confirm I have had to manually change the slots during the flashing process to get custom ROMs installed.
Click to expand...
Click to collapse
I found out that I do have the T-Mobile version that the seller flashed to International Software haha
When I reboot to recovery, I do see that the slots are being changed though.
Would you mind post the exact steps you took to successfully flash a ROM/GAPPS?
oooscasianooo said:
I found out that I do have the T-Mobile version that the seller flashed to International Software haha
When I reboot to recovery, I do see that the slots are being changed though.
Would you mind post the exact steps you took to successfully flash a ROM/GAPPS?
Click to expand...
Click to collapse
Fastboot boot TWRP Marion version
Flash oos
Flash Marion TWRP zip
Check my slot
Reboot recovery
Changed slot since it didn't change
Reboot recovery
Flash oos
Flash Marion TWRP zip
Changed slot
Reboot recovery
Flash custom rom
Flash Marion TWRP zip
Change slot
Reboot recovery
Flash gapps
Flash magisk 20.4
Reboot to system
Those are the steps I had to take before I finally got a custom rom to work. I tried doing the methods posted which would have probably worked if the slots were changing on there own but they weren't for me.
mrmcshagbag said:
Fastboot boot TWRP Marion version
Flash oos
Flash Marion TWRP zip
Check my slot
Reboot recovery
Changed slot since it didn't change
Reboot recovery
Flash oos
Flash Marion TWRP zip
Changed slot
Reboot recovery
Flash custom rom
Flash Marion TWRP zip
Change slot
Reboot recovery
Flash gapps
Flash magisk 20.4
Reboot to system
Those are the steps I had to take before I finally got a custom rom to work. I tried doing the methods posted which would have probably worked if the slots were changing on there own but they weren't for me.
Click to expand...
Click to collapse
Thanks! Do you mean the "mauronofrio" version?
oooscasianooo said:
Thanks! Do you mean the "mauronofrio" version?
Click to expand...
Click to collapse
Yes couldn't remember the exact name but I knew you would be able to find it haha
mrmcshagbag said:
Yes couldn't remember the exact name but I knew you would be able to find it haha
Click to expand...
Click to collapse
hahaha thanks! I was thinking, "is there a T-Mobile version of TWRP?!" haha!