Command '10 volume partition disk:179,128 private' failed with '400 10 command failed'
Kindly help me for this issues, above error msg for every format attempt to sd card.
Related
Hello,
I'm New here....
This is my first T-mobile sda1(Germany) without camera to upgrade/downgrade
I want downgrade back WM2003, and now this mistake!!!
What should I do?
l c:/os.bin
clean up the image temp buffer at 0x8C080000 Length 0x01B00000
MTTYDownloadImageNot allow operation!
Error : DownloadImage return error (code = 0xFFFFFFFF)
Cmd>info 2
GetDeviceInfo=0x00000002
Load Binary NORMAL partition: data from DiskOnChip to RAM
Start to read bianry partition.
Read binary partition successfully.
+ SD Controller init
- SD Controller init
+StorageInit
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
CMD55 failed
Load Binary NORMAL partition: data from DiskOnChip to RAM
Start to read bianry partition.
Read binary partition successfully.
HTCST-MOB001 1Å›™HTCE
Cmd>
Ok, so i flashed a bad rom and my phone stopped recognizing my sdcard in any shape or form. my PC recognizes the card fine, i've formatted, tried different SD CARDS, etc.
the ONLY way it even shows a hint of recognizing it is if i put on a sappimg.nbh file on the sdcard from my PC, i was able to get my phoen back to stock, BUT it ended up being one of the "perfected SPLs" so that i can't do anything from fastboot. the sappimg also took away my amon RA recovery. so now i can't use a recovery or fastboot to install anything.
so i wanted to create a gold card and install a sappimg.nbh that will allow fastboot functioning. but i can't create a gold card since it does not recognize that i have an sd card inserted. SOMEONE PLEASE HELP!! i've searched the forums endlessly and no one has been able to explain to me how i could create a gold card if the phone isn't recognizing the sdcard...
here are phoen specs:
Sapphire PVT 32B SHIP S-ON G
HBOOT-1.33.0006 (SAPP30000)
CPLD-10
RADIO-2.22.23.02
MAY 27 2009, 19:06:41
ok so i found a way to create a gold card... installed a sappimg.img that lets me use fastboot now. but i still can't install a recovery image from fastboot, is there anyway i can do it?
fastboot flash recovery recovery.img
< waiting for device >
sending 'recovery' (4528 KB)... OKAY
writing 'recovery'... INFOsignature checking...
FAILED (remote: signature verify fail)
please note the phone still does not recognize the SDCARD
have tried installing from adb using flash_image :
2) run the following command from the adb directory to mount the cache to the sdcard directory: adb shell mount -t yaffs2 /dev/block/mtdblock4 /sdcard
3) push the normal non Rogers 1.5.2 recovery to the phone: adb push recovery-RA-sapphire-v1.5.2.img /sdcard/r.img
4) flash the non Rogers recovery to the phone: adb shell flash_image /sdcard/r.img -d
but it gives me:
mtd: read error at 0x00000000 (Out of memory)
mtd: read error at 0x00020000 (Out of memory)
mtd: read error at 0x00040000 (Out of memory)
mtd: read error at 0x00060000 (Out of memory)
mtd: read error at 0x00080000 (Out of memory)
when i run nandroid-mobile.sh via adb on my windows xp i get :
error: unable to mount /sdcard, aborting
when i run : mount /sdcard 2>/dev/null i get no errors (not when i unmount it either)
if i delete the : exit1 command for the sdcard i get no backups !?!?! what should i do?
please help
excuse for my bad english .. im swed
Hi, I'm new to the forum,
I have a problem formatting the tablet using the method of BadSector, I get the following message:
---- A.BAT
failed executing command 12 NvError 0x120002
command failure: create failed <bad data>
bootloader status: fatal failure to read / write to mass storage <code:9> message: nverror:0x8 <0x19000008> flags: 0
---- B.BAT
formating partition 2 BCT please wait ... FAILED!
command failure: create failed <bad data>
bootloader status: specified partition is inalid or does not exist <code: 7> message: nverror:0x42008 <0x042008> flags: 0
Sorry for my English (I'm using the google translator)
help im trying to backup my /data on my CWM recovery
This will process - data!
E: error opening ' /data/security'
E: error: Permission denied
>>> free space 99%
>>> needed space 177mb
>>> backing u /data. . .
press back to cancel.
tar: error exit delayed from previous errors
done 0/177mb - free 25183
E: error while making a backup image of /data!
bump..
bump