Database Users

[q] urgent!!! How to install cwm on soft bricked lenovo a6000 plus

How to install CWM Recovery without USB Debugging enabled on LENOVO A6000 Plus?
I've tried minimal adb & flashboot, but it failed.
NB : My phone is soft bricked after installed system update on my rooted lenovo a6000 Plus. [Update kraft-a6000-s_s010_150515]
Please, help me. :crying:

query
I am also having the same problem......
can anyone help?
please plesae

vokkus kreatif said:
How to install CWM Recovery without USB Debugging enabled on LENOVO A6000 Plus?
I've tried minimal adb & flashboot, but it failed.
NB : My phone is soft bricked after installed system update on my rooted lenovo a6000 Plus. [Update kraft-a6000-s_s010_150515]
Please, help me. :crying:
Click to expand...
Click to collapse
Same here...
Did you find any solution

lenovo a60000 ran into problem
hi my lenovo a60000 ran into problem it just vibrates and shows lenovo
start screen and not going anywhere from there,its not even going into
recovery mode,even when i connect to pc it doesn't show up there too,is
there any other alternative to fix it or is my phone cannot be
recovered,any help will really appreciate.

SAME same seems like there is no help out there and we might have to use our phones as paperweight!

hi bud your situation seems to be similar to mine here is how I was able to work out mine, go to boycracked webpage use this " boycracked How to Unbrick Lenovo A6000" In google (sorry I cannot add webpage due to restrictions) the link from boycracked (mentioned above )actually worked the trick was to hold vol up+down key (while the phone is off) and then insert the usb into your computer, secondly my computer kept of saying that qualcomms --digital signatures not verified and the port is supposed to be Qualcomm Lenovo HS-USB QDLoader 9008 where as mine showed up to 9091, to solve this I uninstalled the drivers and then disabled digital signatures (use goggle how to disable signatures verification on whichever windows you are using) and it worked fine. Thank you all

sp_grewal said:
hi bud your situation seems to be similar to mine here is how I was able to work out mine, go to boycracked webpage use this " boycracked How to Unbrick Lenovo A6000" In google (sorry I cannot add webpage due to restrictions) the link from boycracked (mentioned above )actually worked the trick was to hold vol up+down key (while the phone is off) and then insert the usb into your computer, secondly my computer kept of saying that qualcomms --digital signatures not verified and the port is supposed to be Qualcomm Lenovo HS-USB QDLoader 9008 where as mine showed up to 9091, to solve this I uninstalled the drivers and then disabled digital signatures (use goggle how to disable signatures verification on whichever windows you are using) and it worked fine. Thank you all
Click to expand...
Click to collapse
thanks a lot dude finally my phone got new life thanks to you and boycracked

Sent from my Lenovo A6000 using XDA Free mobile app
How to root Lenovo a6000 plus lollipop.I have upgraded from kitkat to lollipop now i unable to root my phone cause no kingroot,iroot,even minimal adb cwm also not working.and unable to flash kitkatrom also cause error aborted.
Please help me

vinod352 said:
Sent from my Lenovo A6000 using XDA Free mobile app
How to root Lenovo a6000 plus lollipop.I have upgraded from kitkat to lollipop now i unable to root my phone cause no kingroot,iroot,even minimal adb cwm also not working.and unable to flash kitkatrom also cause error aborted.
Please help me
Click to expand...
Click to collapse
1. Download custom recovery for lenovo a6000 lollipop, just googling "[A6000]TWRP-2.8.6.0_no_theme.img" (without quotes)
2. download installation zip of supersu from chainfire, just googling "BETA-SuperSU-v2.49.zip" (without quotes)
3. Enter to fastboot, type "fastboot boot [A6000]TWRP-2.8.6.0_no_theme.img" (without quotes) in cmd/terminal. wait for a moment... until your phone land on custom recovery (TWRP)
4. flash file "BETA-SuperSU-v2.49.zip".

Sent from my Lenovo A6000 using XDA Free mobile app
Bro Thanx for reply.I will try and I'll tell here if it success

Please help me my lenovo a6000 is not booting into system or recovery only fastest even after factory rest clear cache and dalvik installing stock rom ?

Thanks!
sp_grewal said:
hi bud your situation seems to be similar to mine here is how I was able to work out mine, go to boycracked webpage use this " boycracked How to Unbrick Lenovo A6000" In google (sorry I cannot add webpage due to restrictions) the link from boycracked (mentioned above )actually worked the trick was to hold vol up+down key (while the phone is off) and then insert the usb into your computer, secondly my computer kept of saying that qualcomms --digital signatures not verified and the port is supposed to be Qualcomm Lenovo HS-USB QDLoader 9008 where as mine showed up to 9091, to solve this I uninstalled the drivers and then disabled digital signatures (use goggle how to disable signatures verification on whichever windows you are using) and it worked fine. Thank you all
Click to expand...
Click to collapse
Thanks.
I did see the boycracked website but i couldn't get my deivce into 9008 mode..thanks a lot

Not able to enter the recovery
My phone is working perfectly(boots to system)...
but Im not able to go to recovery or reset the device...

BenNy tHa said:
My phone is working perfectly(boots to system)...
but Im not able to go to recovery or reset the device...
Click to expand...
Click to collapse
Flash stock recovery with fastboot

BenNy tHa said:
My phone is working perfectly(boots to system)...
but Im not able to go to recovery or reset the device...
Click to expand...
Click to collapse
Just flash a custom one... No image twrp recovery.. It's the only one working now.. You can get it just Google it

gks131 said:
Just flash a custom one... No image twrp recovery.. It's the only one working now.. You can get it just Google it
Click to expand...
Click to collapse
I tried its not working,after flashing when I reboot to recovery it stays @ the android logo page .
May be I'm not doing it properly.
Can u help me with the steps to do it??

BenNy tHa said:
I tried its not working,after flashing when I reboot to recovery it stays @ the android logo page .
May be I'm not doing it properly.
Can u help me with the steps to do it??
Click to expand...
Click to collapse
If you are on lollipop flash this one
http://www.mediafire.com/?7d6aoevnk52cg5i
Use fastboot flash recovery recovery.img

My phone does not reboot

batmanx0369 said:
hi my lenovo a60000 ran into problem it just vibrates and shows lenovo
start screen and not going anywhere from there,its not even going into
recovery mode,even when i connect to pc it doesn't show up there too,is
there any other alternative to fix it or is my phone cannot be
recovered,any help will really appreciate.
Click to expand...
Click to collapse
same problem ; please post if u have found a solution

kanna9999 said:
same problem ; please post if u have found a solution
Click to expand...
Click to collapse
Just use fastboot to flash twrp 3.0.0 by sevenmax (just Google it)
Command:
Fastboot flash recovery (then recovery name.zip or .img)
Then flash from it the rom you like
Sent from my GT-I9300I using Tapatalk

Huawei bricked

today i want to share my sad story with u guys , i got my phone huawe mla-al10 , i flash custom rom lineage os 13.1 from xda for huawei can-11 then it got bootloop , before this i succesfully install it without bootloop , so i decide to reset , then i go to the recovery , idk how my recovery become the stock one ,then i click format data , suddenly its stuck at 61% then keep reboot , i open fastboot then get frp locked , im start panic , then i do a research how to get rid frp locked , they said relock the bootloader , then i relock booatlader , haa its getting more worse , now icant even go to fastboot or update mood , its only goes to factory reset lowlevel.... then screen becomes black with blue led , i connect to pc , i found hs-usb diagnostic 9006 ( com 3 ) thats mean i can unbrick only with 1 way , with Snapdragoon flashtool , but i cant find nowhere for the firmware that make to unbrick using flashtool for my devices , hmmm im so sad right now , is there any way i can make my own flashtool file for snapdragon flashtool ? i hope i can fix this as soon as possible

If ADB is working,just flash your original (firmware) RECOVERY,BOOT and SYSTEM.img from the update.app zip file...after flashing those 3 img file,just reboot via adb...fastboot reboot
Phone should be like new

virusdunil said:
If ADB is working,just flash your original (firmware) RECOVERY,BOOT and SYSTEM.img from the update.app zip file...after flashing those 3 img file,just reboot via adb...fastboot reboot
Phone should be like new
Click to expand...
Click to collapse
to make adb working i need to enable usb debugging bla4 but my phone is totally dead , no fastboot nothing i can do except go to edl modee

shazlieyazizan1 said:
to make adb working i need to enable usb debugging bla4 but my phone is totally dead , no fastboot nothing i can do except go to edl modee
Click to expand...
Click to collapse
same problem adb is also not working did you find any solution?
I am having a problem i didnt do anything with my phone its huawei nova plus just 1 or 2 day ago open the boxed and try to update it using firmware finder app after downloading the full ota phone automatically restart and stuck on installing update 5% and its still on boot loop am not able to flash any firmware using sd card or update.app just because it always failed on 5 % even though am not able to wipe factory/reset it also failing. Can you guys please help me? to solve the problem?

abuapka said:
same problem adb is also not working did you find any solution?
I am having a problem i didnt do anything with my phone its huawei nova plus just 1 or 2 day ago open the boxed and try to update it using firmware finder app after downloading the full ota phone automatically restart and stuck on installing update 5% and its still on boot loop am not able to flash any firmware using sd card or update.app just because it always failed on 5 % even though am not able to wipe factory/reset it also failing. Can you guys please help me? to solve the problem?
Click to expand...
Click to collapse
try get correct model from huawei updater finder ..
if dload method not work then try to go to fastboot mode by tgis way >> Turn off your mobile and just click and hold on DOWN vol then connect it with usb it should work !

Zuk z1 help needed pls it only hope

Hi everyone,
My zuk doesnt start and it show me only Blue LED and if I plug in to my PC only in recovery mode can i transfer something.it can go into twrp and when i try to flash stock rom ie PAS7FDF rooted it goes to bootanimation and then reboots and again and again.I tried QFIL for both cyanogen Stock ROm and Zui .Zui does boot up but is heating very badly and no radio services what so ever.Right now its on cyanogen from Qfil and i managed to flash twrp . I tried fastboot commands but getting errors like "command Write Failed(No Error) .I can access also "edl mode" and can flash the stock rom again but it doesnt help what can I do? hope someone can help me. thank you in advance PLS HELP

Jiayu S3 bootloop problem

Hi i have a Jiayu S3 which for the second time breaks up firstly from my official rom crashed unknown why and my brother managed to relive it installing twrp recovery and xtreme rom. Now againb crashed and enter in a bootloop while surfing on the net. I have to mention that i have [email protected] up my devive some time ago and cannot connencted via usb (pc or usb stick) things that used to do very often. Know i manage to get ito recovery install miui 9 rom(from need rom) but reboot continiously....get back to xtreme (from need rom again) and reboot continously...tried miui 7 rom boot loop again. So i stuck to boot loop!!! i can not use SP flash tools because my PC refuses to intall the correct MTK, MEDIATEK MT66XX or any VCOM ,usb etc drivers (( . It only sees my device as a composite device. I can't use fastboot as long as i don't know how to do it and how i can connect my device to pc . Please help is there any way i can get out of bootloop via sd card from recovery mode?? I am exhausted reading and searching and watching tutorials....Thanks in advance.
PS i manage only 2 times to enter in a chinese mode(black screen) but i don't know how to proceed in that and what does this mode do.

Still no one to help??
Hi again,
No one is willing to help me with my issue ok . I ll ask something else. My pc recognizes my jiayu as composite device , my samsung gt-s6102 2.3.6 android as cdc device and only my huawei lua-01 as android phone lua-01. Could you please help me how to overcome this and procced to frash my jiayu because it didn't seem to get over bootloop while i was trying to install rom via twrp 3.0.2 when i try. Or if you know if there is a file i should delete in file manager so i can proceed over bootloop... thanks in advance.

giolandis said:
Hi again,
No one is willing to help me with my issue ok . I ll ask something else. My pc recognizes my jiayu as composite device , my samsung gt-s6102 2.3.6 android as cdc device and only my huawei lua-01 as android phone lua-01. Could you please help me how to overcome this and procced to frash my jiayu because it didn't seem to get over bootloop while i was trying to install rom via twrp 3.0.2 when i try. Or if you know if there is a file i should delete in file manager so i can proceed over bootloop... thanks in advance.
Click to expand...
Click to collapse
Hi,
can you flash a ROM using SP-Flash Tools? With SPF you don't need the mobile to be switched on. Of course drivers for MTK must be installed properly before doing this. Maybe clearing cache and Dalvik could help as well.

Please Help - Bricked - Stuck at Recovery - Big Problem - LeRee Le 3 C106 - LeEco Coolpad Cool1

Hello. While i tried flash twrp for newest ver and after reboot then cant go in again more to twrp.
I tried already thro MiFlash but PC doesnt recognize qualcom device, i have only "Coolpad Android Bootloader Interface" in device manager.
I also tried flash previous twrp CUOCO92 thro Windows CMD but i got error "unknown command".
I also tried with QFIL and QGDP/YGDP witch cpb file from here
and also doesnt work.
I also tried with Coolpad Download Assistant with this tutorial
https://forum.xda-developers.com/t/...-to-android-9-from-jui-or-nougat-rom.3954064/
but also doesn work, frozen at room upgrading for at least 1 hour and more, after that disconnected cable phone.
This phone is LeRee Le 3 C106
Please help me to recover my brick ;/
EDIT: FIXED!!!

miki666643 said:
Hello. While i tried flash twrp for newest ver and after reboot then cant go in again more to twrp.
I tried already thro MiFlash but PC doesnt recognize qualcom device, i have only "Coolpad Android Bootloader Interface" in device manager.
I also tried flash previous twrp CUOCO92 thro Windows CMD but i got error "unknown command".
I also tried with QFIL and QGDP/YGDP witch cpb file from here
and also doesnt work.
I also tried with Coolpad Download Assistant with this tutorial
https://forum.xda-developers.com/t/...-to-android-9-from-jui-or-nougat-rom.3954064/
but also doesn work, frozen at room upgrading for at least 1 hour and more, after that disconnected cable phone.
This phone is LeRee Le 3 C106
Please help me to recover my brick ;/
EDIT: FIXED!!!
Click to expand...
Click to collapse
HI, how do you have fixed? Please explain me....

dave21272 said:
HI, how do you have fixed? Please explain me....
Click to expand...
Click to collapse
thro YGDP_Tool_V4.0.6 installed original rom
1.52 GB file on MEGA
mega.nz
1. C1回退EUI刷机包 thro YGDP
2. TWRP_3.1.0_Cuoco92 thro mi flash
3. recovery from 4pda
4. ArrowOS Android 11 from 4pda
5. gapps
4pda helped me a lot

miki666643 said:
thro YGDP_Tool_V4.0.6 installed original rom
1.52 GB file on MEGA
mega.nz
1. C1回退EUI刷机包 thro YGDP
2. TWRP_3.1.0_Cuoco92 thro mi flash
3. recovery from 4pda
4. ArrowOS Android 11 from 4pda
5. gapps
4pda helped me a lot
Click to expand...
Click to collapse
Thanks!!! I try now!!!!

Can I flash if my pc recognized Coolpad Android Bootloader Interface wirh YGDP tool?

Great!!!!!!!!!!
my coolpad is alive !!!!!!!
The password for rar MEGA is : coolpadJUI2017
first flash init.cpb
second flash rom.cpb
and your phone is turn on !!!!!!!!!!!

yea exactly

However, I have another way.
1.Shut down your phone.
2.Hold Volume+ and Volume- , but WITHOUT power.
3.Connect it to computer.
4.If your phone's LED is flashing red lights, congratulations. You're now at 9008(EDL).
5.Download "C106-TWRP-需解压使用.zip“ from https://pan.baidu.com/s/1kdgu2YUstL...rentPath=/sharelink2927266148-452227205909178 .
6.Add a rom into the unzip folder.
7.Use QFIL(Miflash Public edition is okay,if you like) to flash it.
8.It should boot up.