Hi,
I have a Vodafone P3600 which I had unlocked and flashed to test both HTC WM5 and Faman WM6 3.3 and 3.4. I have a problem using it with my Parrot CK3100, and it's the following: devices pair perfectly, but when I leave my car and then return, most of times P3600 does not connect with handsfree. Sometimes, it does connect, but after a long time. This occurs with any OS version I have tested.
A problem with CK3100 is discarded because I have flashed it with latest software version, and it was tested with a HP RW6815.
I tried disabling power saving, setting bluetooth as discoverable, installing Jetware, but nothing made it work as it should.
I'm near to sell my P3600 and buy a new HTC Touch only to solve this problem, because I need much a handsfree working in my car.
Can any of you give a hint of what the problem could be?
Thanks.
I forgot to say that if I power on my HTC, it always connect to the Parrot. But when it's in standby sometimes connects and others no.
I have an SonyEricsson HBH-DS200 and this works unfortunately with the P3600 also in a from you described way. I tryed AWE and PDAVIET and also AX3L ROMs.
Other points and problems with BT HandsFree are:
1.) A litle icon to show that the BT HansFree is connected will be showed in the status only after the first paaring. After that, nothing shows you, that the BT HansFree is connected (and therefor can be used) or not.
2.) After a phone call the BT HandsFree will be disconnected.That meanns, that I can not hear the phone ring in the earpice. I only hear it from the P3600. I have 2 choises after that:
a.) If I push te Answer button on the P3600, the voice is on the P3600.
b.) If I push the Answer button on the BT HansFree then the voice is on the BT HansFree (but it will be disconnected after the call).
3.) The volume can not be changed if I use the BT HandsFree. That means, the volume slide bar can be moved/changed, but this has no effect to the volume in the BT HansFree.
In my opinion if the paaring is done and the BT HandsFree is switched on it should be always:
- connected
- an icon in the status line appear
- the voice in the BT HandsFree - independent if the answer button is pushed on the phone or on the BT HandsFree
For me is the BT HandsFree very imortant, and I am a litle bit disappointed, that a device for 500 Eur works that buggy with a technology that is almost 10 year old.
I am hoping someone can help me out I am trying to get my PC working as a bluetooth headset for my wizard the problem I am having is that i get the little headset symbol on the phone but when I choose turn on headset nothing happens I have enabled headset and audio services on the pc and the phone sees it as having the headset service.
and and the pc dings and says the phone is connected to the headset service if it matters my bluetooth uses the older widcomm drivers
any help would be great,
yonu
any ideas?
I got my i8000 two days ago. I've got two BT related challenges.
1. Running the stock ROM, I've had a BT watch (SmartWatchM sw)connected and paired with it. Then I wanted to pair my Plantronics 645 headset with it as well. The BT manager shows both units, but as I paired the headset, the phone disconnected the watch.
2. I walked out of range with my BT headset. It disconnected. As I came back I expected the phone and headset to be paired again automatically. This did not happen. Now both the watch and the phone show up as disconnected in the BT manager.
For 1. a) To have both connected simultaneously I figure I need to add another com port. Is this correct?
For b ) I cannot find the step-by-step instructions on how to do that in the user manual nor in the advanced user guide. Anyone knows the steps?
For 2. What do I need to do to make the two units re-pair without having to go through the whole pairing procedure?
Thanks!
My Z1 works perfectly fine except for the bluetooth. I can't get it to connect with my bluetooth earphones (they are not even detected by my Z1). These earphones are working with my previous phone (LG G2). To see if it was the Z1 fault or the earphones fault, I tried to connect my Z1 with my G2. It worked for a few seconds but then stopped working, and I couldn't get it to connect again (Z1 et G2 both not detected anymore by each other).
I rebooted, tried with wifi on, wifi off, airplane mode and off... Not working
Thanks
Btooth
Same here, doesn't see my JBL Flip 3 or sound bar, no problems with my HTC one M7, any ideas?
I have a BT headsets that costs 20€ and works fine with the ZUK, also while the smartwatch is connected with the phone (using BT also)
Bluetooth works in that I can transfer files to my HTC, just doesn't see my other devices, missing not connecting to my Flip 3 it's a great little speaker.
I'm the same as barito. I've a 360 working on mine and a Bluetooth puk, attached to the headphones. Both have the same range as on my Nexus 5 etc. Can use both at the same time as well. I know its not an answer to the problem but it is not on every phone. I'm using Cyanogen OS and the latest version, uprooted, ATM.
Hello,
here the same problem!
Two ZUK Z1 Devices, for booth i bought a MPOW Bluetooth Headset
BlueTooth 4.1
Freq Range 2.4 GhZ
Operation Class 2
Booth mobiles only shows the MAC ID of the headsets, pairing with these failes.
If I do the same on my Laptop or Nexus tablet, the headsets working fine.
There are any driver updates or anything else I can do?
Or I have to send them back to Amazon...??
Bluetooth headset not detected
Though my zuk z1 paired with my old mobile phone (Sony Ericsson w550i) it fails to detect my Plantroics Bluetooth headset. It shows "no Bluetooth devices found" even when my headset is switched on and kept beside zuk. Though the headset works perfectly with my Samsung galaxy s3 and w550i, it doesn't get detected by zuk z1, forget about pairing/connecting. I've written about the issue to Lenovo on their Facebook page. Waiting for a response
Same issue here... can not connect to UE Roll by Bluetooth. Works perfectly with nexus 5.
Girlfriends Cubot X9 can also not connect to the speaker
---------- Post added at 05:54 PM ---------- Previous post was at 05:41 PM ----------
Paul Bla said:
Same issue here... can not connect to UE Roll by Bluetooth. Works perfectly with nexus 5.
Girlfriends Cubot X9 can also not connect to the speaker
Click to expand...
Click to collapse
Strange, tried some more times so it connected with both devices. Now we are lucky
I am using zuk z1.My bluetooth isn,t turning on .when i tap on the bluetooth button .A loading box appears but after loading the button again gets off nd bluetooth never turns on
How this problem can be tackled down?
I can easily connect and play through my bluetooth handsfree but my net becomes extremely slow. Without the bluetooth device connected i`m getting 4mb/s and with device connected around 0.1mb/s. My laptop seems to be working fine with the BT device. I`m on oreo with latest security patch update. Any solution?