Hi, everyone. I just installed the recovery for my P8 lite, but I am having some problems. Whenever I reboot my device into recovery it will go to recovery, yet when I touch the screen it will automatically reboot meaning that I cannot so anything with the recovery. I thought it could be the recover version so I tried old versions, but it seems to be happening with all of them. Does anyone have the same problem? If so do you know how to solve it?
bael616 said:
Hi, everyone. I just installed the recovery for my P8 lite, but I am having some problems. Whenever I reboot my device into recovery it will go to recovery, yet when I touch the screen it will automatically reboot meaning that I cannot so anything with the recovery. I thought it could be the recover version so I tried old versions, but it seems to be happening with all of them. Does anyone have the same problem? If so do you know how to solve it?
Click to expand...
Click to collapse
flash stock recovery, then flash twrp again
Don't forget to unplug the usb cable before boot on TWRP
Related
First, I searched and read all relevant threads concerning this issue. The five threads that showed up in the search did not help me solve my issue.
So on to my problem. I can no longer flash any rom onto my device. I attempted to flash the first official CM10 nightly (which I recently found out was not flashing properly for others) and had no success. I simply got a black screen and nothing more. I eventually got back into TWRP (v2.2.1.4) to try and Nandroid restore, but I noticed that /data was not formatting and the restore failed. Every time I would slide the bar across to confirm the restore TWRP would reboot itself. I then flashed CWM (v6.0.1.0) and the same problems were there. After that I flashed an earlier version of TWRP and successfully restored the backup. I'm not 100% sure how it was successful. So I decided to try flashing another ROM and no go. Same problems. Anyone have any ideas? When I was using CWM I got the error message below.
Code:
E: unable to locate volume information
E: unable to open ums lunfile '/sys/devices/platform/usb_mass_storage/lun0/file'
E: unable to format data
I'm running Bugless Beast with Motley #219
I'm having similar, if not identical problems. After flashing TWRP 2.2.1.4, I tried flashing a rom and gapps; the tablet would boot endlessly into recovery. Nothing I did would do anything, so I flashed the stock image to start over. This time, I used CWM 6.0.1.0 touch to make sure that it wasn't the recovery that was causing the problem. However, now after flashing the rom and gapps, instead of booting into recovery, I got stuck at a black screen and had to hold the power button in order to get back to the bootloader.
Now, like you, it seems I can't flash any roms anymore. It's frustrating to say the least.
Sent from my Galaxy Nexus using xda app-developers app
aznxk3vi17 said:
I'm having similar, if not identical problems. After flashing TWRP 2.2.1.4, I tried flashing a rom and gapps; the tablet would boot endlessly into recovery. Nothing I did would do anything, so I flashed the stock image to start over. This time, I used CWM 6.0.1.0 touch to make sure that it wasn't the recovery that was causing the problem. However, now after flashing the rom and gapps, instead of booting into recovery, I got stuck at a black screen and had to hold the power button in order to get back to the bootloader.
Now, like you, it seems I can't flash any roms anymore. It's frustrating to say the least.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
What rom did you attempt to flash?
elementur said:
What rom did you attempt to flash?
Click to expand...
Click to collapse
So do I.I attempted to flash the first official CM10 8.18 nightly and had no success. I just got a black screen.Even more I boot into bootloader and choose to boot into recover but just stay at google logo.I try to flash recover once more,but just can't boot into recover!!
I have the same problem, i flashed the cm10 nightly which I learned would not boot. No I have no backup to boot to, and cannot even push a new rom to the storage to try to install.
Shano56 said:
I have the same problem, i flashed the cm10 nightly which I learned would not boot. No I have no backup to boot to, and cannot even push a new rom to the storage to try to install.
Click to expand...
Click to collapse
Can't boot into recover,does anyone know what is wrong?When it is in android I can use APM boot into recover or via ADB,but unusually when it is in the bootloader I choose to boot into recover,it just stay at google logo!!What it is going wrong?
phiracle said:
Can't boot into recover,does anyone know what is wrong?When it is in android I can use APM boot into recover or via ADB,but unusually when it is in the bootloader I choose to boot into recover,it just stay at google logo!!What it is going wrong?
Click to expand...
Click to collapse
There is a bug with the Nexus 7 where you cannot access the recovery through the bootloader. To fix this, boot up into the bootloader on your nexus 7 and, without doing anything, plug it into the computer you used for rooting it and then select the option Restart bootloader and press the power button. Once it gets you back into the bootloader again select Recovery mode and press the power button. It will now get you into the recovery and once you're in recovery you can unplug your tablet from the computer. Note that this fix is not permanent and you will have to do this every time you wish to access your recovery via the bootloader (and this problem is not relevant to the OP's problem).
android1234567 said:
There is a bug with the Nexus 7 where you cannot access the recovery through the bootloader. To fix this, boot up into the bootloader on your nexus 7 and, without doing anything, plug it into the computer you used for rooting it and then select the option Restart bootloader and press the power button. Once it gets you back into the bootloader again select Recovery mode and press the power button. It will now get you into the recovery and once you're in recovery you can unplug your tablet from the computer. Note that this fix is not permanent and you will have to do this every time you wish to access your recovery via the bootloader (and this problem is not relevant to the OP's problem).
Click to expand...
Click to collapse
Thank You Very Much!!!
I am having much the same problem as the OP. I finally rooted my Nexus 7 using WugFresh's Nexus Root Toolkit. It seemed all went well. I chose to use TWRP in a first attempt to install a ROM (I was on rooted stock), and following the instructions for installing my chosen ROM I went into it to wipe cache, Dalvic Cache and data. Both cache and dalvic cache wiped without issue, but when I attempted to wipe /data TWRP simply reported that it failed. With that failing, I did not attempt to install a rom. I was still able to boot out of recovery, but even with repeated attempts wiping data always failed. Is any one aware of any solution or have any suggestions. Thank you!
Hello everyone and I apologize if there's been a solution to this before but I couldn't find it.
I was on Rooted stock V20F, and there was a new OTA update from LG (around 110 MBs). Before installing anything i made a backup from TWRP Recovery just in case anything went bad.
So after I download the official update, the phone reboots, and boots into TWRP recovery. From that moment, I can't get the phone to boot properly no matter what I do.
I tried restoring my backup, the phone will still boot into TWRP. Tried Factory Reset, Format Data, installing a new custom rom and nothing. It always brings me back to TWRP.
Also when i try to get into download mode so I can flash a KDZ file with flash tool, it boots into TWRP again.
Any ideas? Thanks a lot in advance.
edit: I actually found the solution here (it wasn't in the troubleshoot section and I didn't notice it..): http://forum.xda-developers.com/showthread.php?t=2451696
Is there any way to install official OTA updates without the phone freaking out?
Hey guys, I'm a longtime XDA browser but hardly ever post. I have the MXPE rooted with the newest TWRP build and has been running great since I got it. last night flashed the Deodexed 6.0 build from AICPs 5.1.1. I had some issues with the SD card being mounted as internal storage and erasing something so I tried to flash back to stock as my nandroids weren't seen as usable.
Long story short when I flashed back to stock, the recovery would never take. I've flashed the stock recovery and twrp to no avail. For some reason it wont actually stick. Everything else is back to stock but that. When I used the win toolkit and tried to flash twrp again it said something about the folder locations so I'm wondering if I messed something in the partitions.
Question is, have you guys ran into this issue or have any insight on where to go from here? I've looked around but I couldn't find a post that the same as this issue. As a side note, I can get into the bootloader just fine.
I appreciate any info that someone can provide.
Flash twrp. Reboot back to recovery from recovery. Reboot system.
Hopefully it's that easy. Stock os flashes stock recovery on boot. Rebooting recovery from recovery prevents that from happening.
From TWRP:
"Note many devices will replace your custom recovery automatically during first boot.... Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install."
mxpe 6.0
Thanks for the info ffejy462. What happens when I try to flash TWRP and it doesnt stick? I know for a fact that I can boot into it temporarily with fastboot boot and the recovery file. Should I just flash it from there?
THEFILLTER said:
Thanks for the info ffejy462. What happens when I try to flash TWRP and it doesnt stick? I know for a fact that I can boot into it temporarily with fastboot boot and the recovery file. Should I just flash it from there?
Click to expand...
Click to collapse
I'm sorry I didn't see this sooner. Flash recovery with fastboot. Boot into recovery. From reboot menu in recovery, select reboot recovery. Twrp will patch so recovery isn't lost again.
mxpe 6.0
That did it. thanks alot ffejy462!
I just rebooted my phone into recovery mode using this quick reboot pro app, it worked fine, I just wanted to test out the app so I wanted to reboot. I pressed the reboot button in TWRP, I pressed system, I saw the boot logo, but it didn't boot and it just entered the TWRP. I tried to reboot again, the same thing happened. I'm basically stuck in the recovery. I didn't try wiping data and cache or anything like that, I don't want to mess up my phone more. Can someone help me out here, I don't know what to do to fix it
ntldrmissing said:
I just rebooted my phone into recovery mode using this quick reboot pro app, it worked fine, I just wanted to test out the app so I wanted to reboot. I pressed the reboot button in TWRP, I pressed system, I saw the boot logo, but it didn't boot and it just entered the TWRP. I tried to reboot again, the same thing happened. I'm basically stuck in the recovery. I didn't try wiping data and cache or anything like that, I don't want to mess up my phone more. Can someone help me out here, I don't know what to do to fix it
Click to expand...
Click to collapse
Hello there, i had the sane problem one Day, never use an App tha reboots into recovery or bootloader, it Will be stock. For the fix, You have to flash the official Samsung firmware 5.1.1 or 6.0.1 via odin And your Phone Will be Just fine.
Kostas172 said:
Hello there, i had the sane problem one Day, never use an App tha reboots into recovery or bootloader, it Will be stock. For the fix, You have to flash the official Samsung firmware 5.1.1 or 6.0.1 via odin And your Phone Will be Just fine.
Click to expand...
Click to collapse
Or just reflash twrp with odin. This will reset the reboot flag.
As said use the button combo to boot to recovery and you won't have an issue.
ashyx said:
Or just reflash twrp with odin. This will reset the reboot flag.
As said use the button combo to boot to recovery and you won't have an issue.
Click to expand...
Click to collapse
Thanks man! The phone works completely fine now
So i started to update viper4android and i accidentally pressed volume up which tries it to install via AROMA now my phone is stuck on bootloop, it just keeps rebooting to recovery trying to install the viper4android, is there any possible way to get out of this or my phone is dead?
Any help will be appreciated,
TIA
a safe haven said:
So i started to update viper4android and i accidentally pressed volume up which tries it to install via AROMA now my phone is stuck on bootloop, it just keeps rebooting to recovery trying to install the viper4android, is there any possible way to get out of this or my phone is dead?
Any help will be appreciated,
TIA
Click to expand...
Click to collapse
You didn't specify your exact phone model, so assuming KLTE
AFAIK aroma does not work well with our TWRP
Can you pull the battery and then boot directly to recovery so you can wipe system/cache/Dalvik and then flash the ROM again?
If recovery is messed up, can you pull battery, then boot to download mode so you can reflash TWRP in Odin/Heimdall, or better yet flash latest stock Rom (caution if you have a g900V/A with stock locked bootloader) in Odin/Heimdall, followed by TWRP?
Post again if you need more help, and try to include as many specifics as possible eg exact phone model, TWRP version, Rom zip filename, Gapps, etc. I'll try to help if I can
I am very sorry for not posting the model number, mine is G900I (KLTEDV), everytime i turn on the phone it just keeps booting onto the recovery and goes to install the viper4android but it fails to do that and reboots again and again, its impossible to do anything basically, not booting onto the rom or anything. Recovery version is TWRP 3.2.2-0, it opens up directly to the zip file which is viper4androidfx-aroma.zip and tries to flash it and crashes and the whole process starts again, pulling the battery didnt break the chain it just keeps rebooting to do that again!
I reflashed a new twrp recovery ver 3.2.3-0, but it still tries to flash that zip file again! Even after deleting the file itself it still tries to flash it and keeps rebooting!
How do i get rid of this twrp loop!? This is so weird!
P.S: After reflashing twrp the phone boots to the rom normally but i cant access recovery anymore, whenever i go to recovery it goes on in an infinite bootloop (cleared cache and dalvik cache using es explorer root), I am also on LineageOs 16.0, tried stock recovery but the stock recovery also keeps bootlooping.
P.S this viper4android is a magisk module!
NVM, solved it by flashing stock rom! Thanks!