Flashing basebands via twrp may cause soft brick and locking of bootloader and flashing whole rom in qpst is a long process. Flashing baseband via fastboot is fast and safe.
Requirements:
1. ADB and Fastboot installed
2. ZUK USB driver
3. NON-HLOS.bin
Steps:
1. Install adb and fastboot and zuk usb driver.
2. Download modem (NON-HLOS.bin)
3. Copy it to the folder where fastboot is installed
4. Open command prompt in the same folder
5. Put this commands
Code:
fastboot flash modem NON-HLOS.bin
Code:
fastboot erase modemst1
Code:
fastboot erase modemst2
Code:
fastboot reboot
NOTE: If you are using VoLte make backup of efs partition before flashing rom in twrp. Restore after flashing baseband
Links:
9-00009-M8996FAAAANAZM-1.53476.1.zip
9-00026-M8996FAAAANAZM-1.63821.1.zip
M8996FAAAANAZM-1.70664.3.76387.1.zip
M8996FAAAANAZM-1.76387.1.92759.1.zip
reserved
Thanks to all people who have sent their modem so that I can share with you
Nice
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
No need to flash via fastboot, baseband can be flashed via twrp recovery without bricking the device. I already wrote a guide regarding this:
https://forum.xda-developers.com/lenovo-zuk-z2/how-to/guide-flash-firmware-twrp-relocking-t3576196
doesn't work. No audio call in & out!
mklucc said:
doesn't work. No audio call in & out!
Click to expand...
Click to collapse
Flash again
miju12 said:
Flash again
Click to expand...
Click to collapse
i tried many times
mja123 said:
No need to flash via fastboot, baseband can be flashed via twrp recovery without bricking the device. I already wrote a guide regarding this:
https://forum.xda-developers.com/lenovo-zuk-z2/how-to/guide-flash-firmware-twrp-relocking-t3576196
Click to expand...
Click to collapse
whats the issue if somebody flashes in fastboot?
mklucc said:
i tried many times
Click to expand...
Click to collapse
Which baseband?
miju12 said:
Which baseband?
Click to expand...
Click to collapse
M8996FAAAANAZM-1.70664.3.76387.1.zip
M8996FAAAANAZM-1.76387.1.92759.1.zip
and then i came back to my original
9-00026-M8996FAAAANAZM-1.63821.1.zip
mklucc said:
M8996FAAAANAZM-1.70664.3.76387.1.zip
M8996FAAAANAZM-1.76387.1.92759.1.zip
and then i came back to my original
9-00026-M8996FAAAANAZM-1.63821.1.zip
Click to expand...
Click to collapse
i have myself tested flashing all the basebands and works well. Which network operator you are using?
miju12 said:
i have myself tested flashing all the basebands and works well. Which network operator you are using?
Click to expand...
Click to collapse
Vodafone
mklucc said:
Vodafone
Click to expand...
Click to collapse
Make backup of efs partition in twrp. Flash 1.70 baseband and restore the efs and see if voice is working or not
miju12 said:
Make backup of efs partition in twrp. Flash 1.70 baseband and restore the efs and see if voice is working or not
Click to expand...
Click to collapse
Do this delete my rom?
mklucc said:
Do this delete my rom?
Click to expand...
Click to collapse
No
There is baseband v2.0
What's the procedure for that? And how to escape bootloader rebooting?
Is v2.0 any better?
subhrabhadra said:
There is baseband v2.0
What's the procedure for that? And how to escape bootloader rebooting?
Is v2.0 any better?
Click to expand...
Click to collapse
I haven't seen any 2.0 baseband
miju12 said:
No
Click to expand...
Click to collapse
baseband 1.76 doesn't work. Now try 1.70
---------- Post added at 06:47 PM ---------- Previous post was at 06:42 PM ----------
even baseband 1.70 does not work
mklucc said:
baseband 1.76 doesn't work. Now try 1.70
---------- Post added at 06:47 PM ---------- Previous post was at 06:42 PM ----------
even baseband 1.70 does not work
Click to expand...
Click to collapse
Okay. So which ROM you are in? And what was the last stock ROM you have flashed?
Related
Unfortunately, I upgraded my Ativ S with the official Rom GDR3 without first unlocked phone.
I seem to have realized that it is not possible to unlock with this new Rom
You could downgrade to the original Rom GDR2 and then unlock the phone?
What procedure I could follow?
Thanks
MarkAndroid said:
Unfortunately, I upgraded my Ativ S with the official Rom GDR3 without first unlocked phone.
I seem to have realized that it is not possible to unlock with this new Rom
You could downgrade to the original Rom GDR2 and then unlock the phone?
What procedure I could follow?
Thanks
Click to expand...
Click to collapse
Have you tried following this?
http://forum.xda-developers.com/showthread.php?t=2391138
no. immediately check the indicated topic. thanks
MarkAndroid said:
no. immediately check the indicated topic. thanks
Click to expand...
Click to collapse
Also, look here. There's a link to Russian GDR2 (you can easily change country CSC code after flashing the Russian ROM via SamWP8 Tools). Also, here's the link to windowsmania forum with a GDR3 ROM.
Just a note, when flashing ROM using Flashing tool, don't forget to specify the CSC code. Dunno why, but I HAD to specify my original CSC code in the flashing tool to successfully flash my phone. My phone was imported from Hungary and had XEH CSC code. So until I specified XEH in the drop-down box within the flashing tool, I've been getting partition mismatch errors. Once I set XEH, flashing went flawless.
Luxon said:
Also, look here. There's a link to Russian GDR2 (you can easily change country CSC code after flashing the Russian ROM via SamWP8 Tools). Also, here's the link to windowsmania forum with a GDR3 ROM.
Just a note, when flashing ROM using Flashing tool, don't forget to specify the CSC code. Dunno why, but I HAD to specify my original CSC code in the flashing tool to successfully flash my phone. My phone was imported from Hungary and had XEH CSC code. So until I specified XEH in the drop-down box within the flashing tool, I've been getting partition mismatch errors. Once I set XEH, flashing went flawless.
Click to expand...
Click to collapse
Latest samsung update changes partition table.
-W_O_L_F- said:
Latest samsung update changes partition table.
Click to expand...
Click to collapse
How do I check my CSC if my phone is on Retail GDR3 + Samsung firmware
-W_O_L_F- said:
Latest samsung update changes partition table.
Click to expand...
Click to collapse
then it is no longer possible to downgrade?
MarkAndroid said:
then it is no longer possible to downgrade?
Click to expand...
Click to collapse
Of course possible! Just reflash it to gdr1 or 2.
---------- Post added at 02:19 AM ---------- Previous post was at 02:18 AM ----------
AlvinPhilemon said:
How do I check my CSC if my phone is on Retail GDR3 + Samsung firmware
Click to expand...
Click to collapse
*#1234# in diagnosis doesn't work?
-W_O_L_F- said:
Of course possible! Just reflash it to gdr1 or 2.
---------- Post added at 02:19 AM ---------- Previous post was at 02:18 AM ----------
*#1234# in diagnosis doesn't work?
Click to expand...
Click to collapse
Nope. Blocked in retail GDR3. My MOID is 000-AT (default)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-W_O_L_F- said:
Of course possible! Just reflash it to gdr1 or 2.
---------- Post added at 02:19 AM ---------- Previous post was at 02:18 AM ----------
*#1234# in diagnosis doesn't work?
Click to expand...
Click to collapse
Thanks again.
Study the topic previously linked and as soon as I try to downgrade.
-W_O_L_F- said:
Latest samsung update changes partition table.
Click to expand...
Click to collapse
So if the flasher says, "partition table mismatch", is it safe to flash in this case?
Luxon said:
So if the flasher says, "partition table mismatch", is it safe to flash in this case?
Click to expand...
Click to collapse
It's safe to flash CSC, full, and full without CSC.
How to root Moto G 2014 on Android Marshmallow (only 6.0 BR)
Needed Bootloader unlocked and TWRP installed.
1- Boot into Bootloader mode
2- Connect to your PC
3- Unzip the root-titan-M-BR.zip file on the computer.
4- Click in Run.bat and wait.
5- After reboot in to bootloader again, go to Recovery and access the TWRP.
6- Copy the BETA-SuperSU-2.52.zip file to your phone memory and flash it.
7. Done
Credits: EmersonTR and Chainfire
Thanks so much to @Chainfire for SuperSU zip and this WIP for modding the Kernel.
@Emerson1 Will this work for XT1068?
Because I'm using 6.0 BR on Indian Retail.
sura14 said:
@Emerson1 Will this work for XT1068?
Because I'm using 6.0 BR on Indian Retail.
Click to expand...
Click to collapse
Yes
Coool.
I Think I am Late.
i also Created Kernel
but didnt knw works or not !
Btw Which Software Did u use for pAcking -Repackig Boot.img ??
Are you sure?
---------- Post added at 11:49 AM ---------- Previous post was at 11:48 AM ----------
@lulshr : thanks Bro.
i have test now and work....
Flashed, everything working so far, i have used Greenify, Titanium Backup and root explorer, all seems to be working :)
@P.Fan : So You did using the above procedure which is mentioned in OP
manojkumar8552 said:
Coool.
I Think I am Late.
i also Created Kernel
but didnt knw works or not !
Btw Which Software Did u use for pAcking -Repackig Boot.img ??
Click to expand...
Click to collapse
For get the boot.img, i made one twrp backup and copied the file boot.emmc.win and renamed for boot.img.
For unpack and repack i used the tool "bootimg.exe"
https://mega.nz/#!3Z8FASSL!FNZ0pM89Y1BdSbgTrKdw_3uU61KWgILHYPX8ceGyfEI
bootimg.exe --unpack-bootimg boot.img
bootimg.exe --repack-bootimg
Emerson1 said:
For get the boot.img, i made one twrp backup and copied the file boot.emmc.win and renamed for boot.img.
For unpack and repack i used the tool "bootimg.exe"
https://mega.nz/#!3Z8FASSL!FNZ0pM89Y...ILHYPX8ceGyfEI
bootimg.exe --unpack-bootimg boot.img
bootimg.exe --repack-bootimg
Click to expand...
Click to collapse
Cool !!
I created boot.img already Yesterday but no one here for testing [emoji20]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent via my Moto G 2014 using Tapatalk
manojkumar8552 said:
Cool !!
I created boot.img already Yesterday but no one here for testing [emoji20]
Sent via my Moto G 2014 using Tapatalk
Click to expand...
Click to collapse
Nice work bro
Sent by Redmi Pro
sura14 said:
@P.Fan : So You did using the above procedure which is mentioned in OP
Click to expand...
Click to collapse
Yupz.
That How He Get ROOt his MarshMellow !!
Thanks Bro @manojkumar8552
No one up with a screenshot? Here I come
Edit : Wifi issues anyone? Mine is stuck at "obtaining IP address"
Edit 2 : Got connected.
@akay193 you followed the same procedure?
Does this work on xt1064?
Edit: It seems to be working.
Doesn't working for me. Black blinking screen.
nice everything working good and like a charm no problems yet!!
keep up the good work..
:thumps up
Can i direct flash supersu via TWRP?
Sent from my XT1069 using XDA Premium 4 mobile app
amritmalviya said:
Can i direct flash supersu via TWRP?
Sent from my XT1069 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
no u cant bro it will result in bootloop
cz it needs to be in system read above on first page.. @amritmalviya
hello every one
excuse my English
i'm new here .
i need help with my n9005 hlte . my wifi stuck because i flash new modem and bootloder
i use tema cm13 ROM.
what i tried so far :
1\ full wipe
2\ flash stock ROM 5.0
3\ flash stock ROM 4.4.2
4\ all WiFi apps on play store
please help
mamounsea said:
hello every one
excuse my English
i'm new here .
i need help with my n9005 hlte . my wifi stuck because i flash new modem and bootloder
i use tema cm13 ROM.
what i tried so far :
1\ full wipe
2\ flash stock ROM 5.0
3\ flash stock ROM 4.4.2
4\ all WiFi apps on play store
please help
Click to expand...
Click to collapse
All you have to do is flash lollipop stock Rom via Odin. Then cf root and flash recovery. After that flash your cm13 Rom. After flash cm13 Rom then only updated your modem and boatloader. Make sure your lollipop Rom is the latest flashing.
Yumiko87 said:
All you have to do is flash lollipop stock Rom via Odin. Then cf root and flash recovery. After that flash your cm13 Rom. After flash cm13 Rom then only updated your modem and boatloader. Make sure your lollipop Rom is the latest flashing.
Click to expand...
Click to collapse
i followed this steps exactly. but nothing changes. still stuck :crying:
mamounsea said:
i followed this steps exactly. but nothing changes. still stuck :crying:
Click to expand...
Click to collapse
Can I know what you mean by stuck?
---------- Post added at 10:10 PM ---------- Previous post was at 10:08 PM ----------
Yumiko87 said:
Can I know what you mean by stuck?
Click to expand...
Click to collapse
Could you give more info bout your custom Rom you flash? Did you follow the instruction when flashing your rom? What is your boatloader and modem now? And before.
Yumiko87 said:
Can I know what you mean by stuck?
---------- Post added at 10:10 PM ---------- Previous post was at 10:08 PM ----------
Could you give more info bout your custom Rom you flash? Did you follow the instruction when flashing your rom? What is your boatloader and modem now? And before.
Click to expand...
Click to collapse
i really appreciate your help
by stuck i mean it wouldn't turn on. it's just stuck
right now my bootloader :N9005XXUGBOJ6 - baseband: N9005XXUGBOJ1
ROM: cm13 - temasek - bulid 12.2
i did exact steps you mentioned
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/IMG][/IMG]
Yumiko87 said:
Can I know what you mean by stuck?
---------- Post added at 10:10 PM ---------- Previous post was at 10:08 PM ----------
Could you give more info bout your custom Rom you flash? Did you follow the instruction when flashing your rom? What is your boatloader and modem now? And before.
Click to expand...
Click to collapse
mamounsea said:
i really appreciate your help
by stuck i mean it wouldn't turn on. it's just stuck
right now my bootloader :N9005XXUGBOJ6 - baseband: N9005XXUGBOJ1
ROM: cm13 - temasek - bulid 12.2
i did exact steps you mentioned
Click to expand...
Click to collapse
Can I ask you a question? If you flash the stock Rom lollipop Rom via Odin it's still stuck on the WiFi? Or only stuck in your cm13 rom? Please do comfirm this .
Yes it's stuck on lollipop stock rom, and kitkat stock rom also.
I noticed when i go to wifi>advanced my MAC address shows 02:00:00:00:00:00
mamounsea said:
I noticed when i go to wifi>advanced my MAC address shows 02:00:00:00:00:00
Click to expand...
Click to collapse
What ver of boatloader and modem you are?
Bootloader: N9005XXUGBOJ6
Modem: N9005XXUGBOJ1
mamounsea said:
Bootloader: N9005XXUGBOJ6
Modem: N9005XXUGBOJ1
Click to expand...
Click to collapse
Have you try others boatloader and modem?
yes i do ..... but the result same.
any suggestions ???
mamounsea said:
yes i do ..... but the result same.
any suggestions ???
Click to expand...
Click to collapse
Try unplug your sd card and restart the phone and see.
Yumiko87 said:
Try unplug your sd card and restart the phone and see.
Click to expand...
Click to collapse
okay i well give it a try
You might try to look on this too if still not working:
http://android-active.blogspot.my/2016/06/100-solution-for-samsung-not3-n9005.html?m=1
still not working
From the start it reads as a hardware problem .
mamounsea said:
still not working
Click to expand...
Click to collapse
Can I know which ver of modem and boatloader you are flashing and how you flash it? Before that your WiFi is in good condition?
I quite strange on it as flashing a wrong boatloader or modem will not have bring serious impact to the device unless you are wrong flashing in the process or some error message during flashing.
it's not the first time that i flash a modem and bootloader. until the end of process there is no error messages.
and yes before that my WiFi was work'n perfect.
after my wifi stuck i tried about 7 modems but all didn't fix my issue.
unfortunately i don't know what modem i was use before.
again thanks for your help
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here We GoWorld Wide Release
*****************************************************************************
Stock N920C Nougat Firmware Links:
All Regions
**: SamMobile Link (Select Your Region and Go)
**: http://live.samsung-updates.com/index.php?device=SM-N920C (Thanks @Or_a) (Select Your Region and Go)
** http://updato.com/firmware-archive-select-model?r=&v=Nougat(Android+7.0)&q=n920c[Fastest] (Select Your Region and Go)
*****************************************************************************
Turkey Exclusive
1: http://downloadmirror.co/Vvo/TUR-N920CXXU3CQC7-20170317134533.zip (thanks @vysus)
2: http://rapidgator.net/file/363cf2481020b804f3691b02f428b294 (thanks @rohitsinghpu)
3: https://alfafile.net/file/UWKT (thanks @rohitsinghpu)
4: https://simunlockremote.com/galaxy-note-series-firmware/ (thanks @AntonPres)
*****************************************************************************
Note 5 Nougat UI screenshot, Here: http://m.imgur.com/a/IC8K5
*****************************************************************************
Additional:
[Fix] [7.0] Samsung Account Login Password Loop after Rooting on Nougat
S Health App Compromised Error on Nougat:
1) Flash TWRP using odin,
2) Flash supersu using TWRP (Dr Ketan Script)
3) Edit system/build.prop, set ro.config.tima to 0 save and reboot
4) Open SHealth at least once makes sure knox error is gone.
Love it ! But note 5 verizon haven't get it now
lovehtcone said:
Love it ! But note 5 verizon haven't get it now
Click to expand...
Click to collapse
Carriers One have to wait at least one more month
Odin-flashable, rapid link: http://downloadmirror.co/Vvo/TUR-N920CXXU3CQC7-20170317134533.zip
vysus said:
Odin-flashable, rapid link: http://downloadmirror.co/Vvo/TUR-N920CXXU3CQC7-20170317134533.zip
Click to expand...
Click to collapse
Can i flash through odin on my N920C indian model?
Very slowly.
Ijaz Farooq said:
Carriers One have to wait at least one more month[/QUOTE
---------- Post added at 07:00 PM ---------- Previous post was at 06:59 PM ----------
satya_red said:
Can i flash through odin on my N920C indian model?
Click to expand...
Click to collapse
I thinks Get it
Click to expand...
Click to collapse
Can I flash on N920G???
lovehtcone said:
Very slowly.
Ijaz Farooq said:
Carriers One have to wait at least one more month[/QUOTE
---------- Post added at 07:00 PM ---------- Previous post was at 06:59 PM ----------
I thinks Get it
Click to expand...
Click to collapse
On N920C, Yes
but Indian model is N920G
Click to expand...
Click to collapse
israelnobrega said:
Can I flash on N920G???
Click to expand...
Click to collapse
No
Nougat for Note 5 Turkey N920C
http://rapidgator.net/file/363cf2481020b804f3691b02f428b294
https://alfafile.net/file/UWKT
vysus said:
Odin-flashable, rapid link: http://downloadmirror.co/Vvo/TUR-N920CXXU3CQC7-20170317134533.zip
Click to expand...
Click to collapse
Is that official turkey Rom,Isn't it? Can flash via Odin also?
Yep, you can find other mirrors around, is the same files
This is the quicker server at the moment...
What about N920i
N920G, hurry up Samsung!
Deep sleep issue is fixed.
cewrld said:
Deep sleep issue is fixed.
Click to expand...
Click to collapse
Very good news!! If i am in custom now, can i flash stock directly by odin?
Thnx
Hazel76 said:
Very good news!! If i am in custom now, can i flash stock directly by odin?
Thnx
Click to expand...
Click to collapse
Yes, I flashed via Odin (4 files version), but you might need to do factory reset from recovery.
cewrld said:
Yes, I flashed via Odin (4 files version), but you might need to do factory reset from recovery.
Click to expand...
Click to collapse
Thanks! Then is no problem if the phone is rooted or not,right? I reset everything from recovery and then flash via odin?
Or is better restore from recovery to MM and then flash? It is my first time and i feel very lost
cewrld said:
Yes, I flashed via Odin (4 files version), but you might need to do factory reset from recovery.
Click to expand...
Click to collapse
Where do You find 4 files Nougat ROM?
Hazel76 said:
Very good news!! If i am in custom now, can i flash stock directly by odin?
Thnx
Click to expand...
Click to collapse
1)No need to restore MM backup from recovery and then flash
2)You can flash it directly using odin, after successfully flashed factory reset your phone through stock recovery
3)Also you can flash it by complete wipe from twrp recovery
4)Since your running custom rom usb debugging and oem unlocking are already eanbled but be sure once before flashing
Note-Be sure Usb debugging And Oem Unlocking options are enabled from developers option before flashing thorugh odin (Go to setting>about device>software info>Tap build no for 7-8 times until you see developers option is enabled, You can find setting>developers option mostly below about device..From there make sure usb debugging and oem unlocking is enabled)
FLASH ONLY IF YOUR DEVICE IS SUPPORTED BY THIS TURKEY BUILD AND FOLLOW PROPER ODIN FLASHING GUIDE YOU CAN FIND EASILY ANYWHERE IN FORUM
Hi There !
today i flashed Cyanogenmod 11 on my s5360 and its Gapps Then i turned of my phone and inserted my SIM Card then tuned my phone back on but it freezed on start up
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Where you get that rom?
noob&noob said:
Where you get that rom?
Click to expand...
Click to collapse
From XDA https://forum.xda-developers.com/showthread.php?t=2765874
WarCrier said:
From XDA https://forum.xda-developers.com/showthread.php?t=2765874
Click to expand...
Click to collapse
You can try other cm11 rom, may be it will solve your problem...
noob&noob said:
You can try other cm11 rom, may be it will solve your problem...
Click to expand...
Click to collapse
lol,it's due to his baseband dude
---------- Post added at 12:49 PM ---------- Previous post was at 12:48 PM ----------
to fix this,go back to stock rom and install the correct stock rom and baseband for your region .
WarCrier said:
Hi There !
today i flashed Cyanogenmod 11 on my s5360 and its Gapps Then i turned of my phone and inserted my SIM Card then tuned my phone back on but it freezed on start up
Click to expand...
Click to collapse
same happend to me thats why im here
FIX
WarCrier said:
Hi There !
today i flashed Cyanogenmod 11 on my s5360 and its Gapps Then i turned of my phone and inserted my SIM Card then tuned my phone back on but it freezed on start up
Click to expand...
Click to collapse
i fixed it by flashing CSC and MODEM in odin:laugh:
Skunkser said:
i fixed it by flashing CSC and MODEM in odin:laugh:
Click to expand...
Click to collapse
It's happened to me too. What utility can unpack TAR.MD5 files so I/we can get at the the CSC and MODEM files? Perhaps 7Zip for Windows? Is there a good Linux utility?
---------- Post added at 06:03 AM ---------- Previous post was at 05:58 AM ----------
Laugh2 said:
It's happened to me too. What utility can unpack TAR.MD5 files so I/we can get at the the CSC and MODEM files? Perhaps 7Zip for Windows? Is there a good Linux utility?
---------- Post added at 06:03 AM ---------- Previous post was at 05:58 AM ----------
It's happened to me too. What utility can unpack TAR.MD5 files so I/we can get at the CSC and MODEM files? Perhpas 7Zip for Windows? Is there a good Linux utility?
---------- Post added at 06:04 AM ---------- Previous post was at 06:03 AM ----------
It's happened to me too. What utility can unpack TAR.MD5 files so I/we can get at the CSC and MODEM files? Perhpas 7Zip for Windows? Is there a good Linux utility?
Click to expand...
Click to collapse
Once you got that file,turn your phone into download mode and open odin on you pc,then connect the phone to the pc via the usb cable then chose modem and csc . chose start,done
vdhero said:
Once you got that file,turn your phone into download mode and open odin on you pc,then connect the phone to the pc via the usb cable then chose modem and csc . chose start,done
Click to expand...
Click to collapse
Thanks, for your reply. The idea is to extract the CSC and MODEM files to use with other ROMs. I found a utility called Odinatrix, which can unpack the old stock ROMs which other programs such as 7Zip couldn't deal with. It worked first time and has helped re-animate an old mobile, which has been lying (almost) bricked for a year or more.
Laugh2 said:
Thanks, for your reply. The idea is to extract the CSC and MODEM files to use with other ROMs. I found a utility called Odinatrix, which can unpack the old stock ROMs which other programs such as 7Zip couldn't deal with. It worked first time and has helped re-animate an old mobile, which has been lying (almost) bricked for a year or more.
Click to expand...
Click to collapse
Nice,I haven't heard of it but odin is still the best option for me. Thanks anyway
vdhero said:
Nice,I haven't heard of it but odin is still the best option for me. Thanks anyway
Click to expand...
Click to collapse
Yes, Odin is fine for flashing but only after you've got your ROM sorted out.
Because Custom ROMs either include no modem software or include modem software for other countries then I often have to find modem and CSC info from other sources (such as Stock ROMs). Hence the need to unpack old TAR.MD5 files for Stock ROMs before using Odin/Heinmdall/JOdin to flash. Sometimes the ROMs have been so old that 7.zip et al won't touch them - hence it was very pleasing that Odinatrix did actually work.
Sir I have the same problem with my sgy it freezes on the boot when I insert the sim and now my sim is not working after flashing the stock rom please help