Downgrade Ativ S - Windows Phone 8 Development and Hacking

Unfortunately, I upgraded my Ativ S with the official Rom GDR3 without first unlocked phone.
I seem to have realized that it is not possible to unlock with this new Rom
You could downgrade to the original Rom GDR2 and then unlock the phone?
What procedure I could follow?
Thanks

MarkAndroid said:
Unfortunately, I upgraded my Ativ S with the official Rom GDR3 without first unlocked phone.
I seem to have realized that it is not possible to unlock with this new Rom
You could downgrade to the original Rom GDR2 and then unlock the phone?
What procedure I could follow?
Thanks
Click to expand...
Click to collapse
Have you tried following this?
http://forum.xda-developers.com/showthread.php?t=2391138

no. immediately check the indicated topic. thanks

MarkAndroid said:
no. immediately check the indicated topic. thanks
Click to expand...
Click to collapse
Also, look here. There's a link to Russian GDR2 (you can easily change country CSC code after flashing the Russian ROM via SamWP8 Tools). Also, here's the link to windowsmania forum with a GDR3 ROM.
Just a note, when flashing ROM using Flashing tool, don't forget to specify the CSC code. Dunno why, but I HAD to specify my original CSC code in the flashing tool to successfully flash my phone. My phone was imported from Hungary and had XEH CSC code. So until I specified XEH in the drop-down box within the flashing tool, I've been getting partition mismatch errors. Once I set XEH, flashing went flawless.

Luxon said:
Also, look here. There's a link to Russian GDR2 (you can easily change country CSC code after flashing the Russian ROM via SamWP8 Tools). Also, here's the link to windowsmania forum with a GDR3 ROM.
Just a note, when flashing ROM using Flashing tool, don't forget to specify the CSC code. Dunno why, but I HAD to specify my original CSC code in the flashing tool to successfully flash my phone. My phone was imported from Hungary and had XEH CSC code. So until I specified XEH in the drop-down box within the flashing tool, I've been getting partition mismatch errors. Once I set XEH, flashing went flawless.
Click to expand...
Click to collapse
Latest samsung update changes partition table.

-W_O_L_F- said:
Latest samsung update changes partition table.
Click to expand...
Click to collapse
How do I check my CSC if my phone is on Retail GDR3 + Samsung firmware

-W_O_L_F- said:
Latest samsung update changes partition table.
Click to expand...
Click to collapse
then it is no longer possible to downgrade?

MarkAndroid said:
then it is no longer possible to downgrade?
Click to expand...
Click to collapse
Of course possible! Just reflash it to gdr1 or 2.
---------- Post added at 02:19 AM ---------- Previous post was at 02:18 AM ----------
AlvinPhilemon said:
How do I check my CSC if my phone is on Retail GDR3 + Samsung firmware
Click to expand...
Click to collapse
*#1234# in diagnosis doesn't work?

-W_O_L_F- said:
Of course possible! Just reflash it to gdr1 or 2.
---------- Post added at 02:19 AM ---------- Previous post was at 02:18 AM ----------
*#1234# in diagnosis doesn't work?
Click to expand...
Click to collapse
Nope. Blocked in retail GDR3. My MOID is 000-AT (default)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

-W_O_L_F- said:
Of course possible! Just reflash it to gdr1 or 2.
---------- Post added at 02:19 AM ---------- Previous post was at 02:18 AM ----------
*#1234# in diagnosis doesn't work?
Click to expand...
Click to collapse
Thanks again.
Study the topic previously linked and as soon as I try to downgrade.

-W_O_L_F- said:
Latest samsung update changes partition table.
Click to expand...
Click to collapse
So if the flasher says, "partition table mismatch", is it safe to flash in this case?

Luxon said:
So if the flasher says, "partition table mismatch", is it safe to flash in this case?
Click to expand...
Click to collapse
It's safe to flash CSC, full, and full without CSC.

Related

MM for T715 released

Marshmallow for the T715 got released few hours ago if someone has that model and wants to take a look
http://live.samsung-updates.com/index.php?device=SM-T715
Sent from my SM-T715 using Tapatalk
Still not avaible in Italy. Checked right now via OTA
Giuskiller said:
Still not avaible in Italy. Checked right now via OTA
Click to expand...
Click to collapse
Check with Smart Switch, not OTA.
I'm in Italy and updating
Can you give me something about smart switch? I don't know what it is. It's an app?
---------- Post added at 10:23 PM ---------- Previous post was at 10:16 PM ----------
Oh, i found it...a pc software. But i was looking for a "mobile" solution...i haven't a pc right now.
Giuskiller said:
Can you give me something about smart switch? I don't know what it is. It's an app?
---------- Post added at 10:23 PM ---------- Previous post was at 10:16 PM ----------
Oh, i found it...a pc software. But i was looking for a "mobile" solution...i haven't a pc right now.
Click to expand...
Click to collapse
http://www.samsung.com/global/download/smartswitchwin (for Windows)
http://www.samsung.com/global/download/smartswitchmac (for Mac)
I don't know when (and if) they release update also OTA
I just tried smart switch pc software but no updates yet in Canada. are these region based ? I'm new to Samsung updates...recently traded my nexus 9 for s2
nolook said:
I just tried smart switch pc software but no updates yet in Canada. are these region based ? I'm new to Samsung updates...recently traded my nexus 9 for s2
Click to expand...
Click to collapse
Seems to be for Italy for now. But i guess it should be possible to flash it via Odin.
But i really don't know if that's going to work.
I have a Italian csc on my phone but works great. But that's a custom rom and includes all kinds of csc. But also due to me buying it in germany it has a German csc and that worked great in austria. So i would give it a try in the case someone gets a fast download ?
Sent from my SM-G928F using Tapatalk
Maybe somebody can try odin flash.
Other solution is to install some older italian stock rom (from sammobile) and then to update via smart switch...
CAN i flash it via SM-T715Y ?
is that different between 715Y with 715 ?
EBI_LANCER said:
CAN i flash it via SM-T715Y ?
is that different between 715Y with 715 ?
Click to expand...
Click to collapse
I cant say for shure. but there is a rom (the one i use) and its for both models. so maybe there is some information to find the answer.
http://forum.xda-developers.com/tab-s2/development/rom-v1-0-byjafangie-odin-flashable-t3286293
donky kong 017 said:
I cant say for shure. but there is a rom (the one i use) and its for both models. so maybe there is some information to find the answer.
http://forum.xda-developers.com/tab-s2/development/rom-v1-0-byjafangie-odin-flashable-t3286293
Click to expand...
Click to collapse
it must be same but i am not shure about it
EBI_LANCER said:
it must be same but i am not shure about it
Click to expand...
Click to collapse
i have looked a little bit around and have not found anything. i guess they are the same but can not say with certainty sorry mate
Hey guys, i'm updating via ota right now (Italy)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/url]
hostare immagini[/IMG]
EBI_LANCER said:
CAN i flash it via SM-T715Y ?
is that different between 715Y with 715 ?
Click to expand...
Click to collapse
The link posted is for 715X
I believe we will have to wait for 715Y
I just installed the Italian version on a UK 715 with no issues.
How? Clean odin or?
ivanox1972 said:
How? Clean odin or?
Click to expand...
Click to collapse
Yes, put it in download mode, connected to Odin, installed fine and there we are.
depressedyeti said:
Yes, put it in download mode, connected to Odin, installed fine and there we are.
Click to expand...
Click to collapse
Nice to hear. Do you have a fast download link?
Sent from my SM-G928F using Tapatalk
Great, T715, T710, T815 but no T810, wheres the love for the WiFi 9.7inch Samsung :/
i tested on SM-T715Y via odin but failed ..

[Links Added] Samsung Officially Started Rolling out Note 5 Nougat Update

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here We Go​World Wide Release
*****************************************************************************
Stock N920C Nougat Firmware Links:
All Regions
**: SamMobile Link (Select Your Region and Go)
**: http://live.samsung-updates.com/index.php?device=SM-N920C (Thanks @Or_a) (Select Your Region and Go)
** http://updato.com/firmware-archive-select-model?r=&v=Nougat(Android+7.0)&q=n920c[Fastest] (Select Your Region and Go)
*****************************************************************************
Turkey Exclusive
1: http://downloadmirror.co/Vvo/TUR-N920CXXU3CQC7-20170317134533.zip (thanks @vysus)
2: http://rapidgator.net/file/363cf2481020b804f3691b02f428b294 (thanks @rohitsinghpu)
3: https://alfafile.net/file/UWKT (thanks @rohitsinghpu)
4: https://simunlockremote.com/galaxy-note-series-firmware/ (thanks @AntonPres)
*****************************************************************************
Note 5 Nougat UI screenshot, Here: http://m.imgur.com/a/IC8K5
*****************************************************************************
Additional:
[Fix] [7.0] Samsung Account Login Password Loop after Rooting on Nougat
S Health App Compromised Error on Nougat:
1) Flash TWRP using odin,
2) Flash supersu using TWRP (Dr Ketan Script)
3) Edit system/build.prop, set ro.config.tima to 0 save and reboot
4) Open SHealth at least once makes sure knox error is gone.
Love it ! But note 5 verizon haven't get it now
lovehtcone said:
Love it ! But note 5 verizon haven't get it now
Click to expand...
Click to collapse
Carriers One have to wait at least one more month
Odin-flashable, rapid link: http://downloadmirror.co/Vvo/TUR-N920CXXU3CQC7-20170317134533.zip
vysus said:
Odin-flashable, rapid link: http://downloadmirror.co/Vvo/TUR-N920CXXU3CQC7-20170317134533.zip
Click to expand...
Click to collapse
Can i flash through odin on my N920C indian model?
Very slowly.
Ijaz Farooq said:
Carriers One have to wait at least one more month[/QUOTE
---------- Post added at 07:00 PM ---------- Previous post was at 06:59 PM ----------
satya_red said:
Can i flash through odin on my N920C indian model?
Click to expand...
Click to collapse
I thinks Get it
Click to expand...
Click to collapse
Can I flash on N920G???
lovehtcone said:
Very slowly.
Ijaz Farooq said:
Carriers One have to wait at least one more month[/QUOTE
---------- Post added at 07:00 PM ---------- Previous post was at 06:59 PM ----------
I thinks Get it
Click to expand...
Click to collapse
On N920C, Yes
but Indian model is N920G
Click to expand...
Click to collapse
israelnobrega said:
Can I flash on N920G???
Click to expand...
Click to collapse
No
Nougat for Note 5 Turkey N920C
http://rapidgator.net/file/363cf2481020b804f3691b02f428b294
https://alfafile.net/file/UWKT
vysus said:
Odin-flashable, rapid link: http://downloadmirror.co/Vvo/TUR-N920CXXU3CQC7-20170317134533.zip
Click to expand...
Click to collapse
Is that official turkey Rom,Isn't it? Can flash via Odin also?
Yep, you can find other mirrors around, is the same files
This is the quicker server at the moment...
What about N920i
N920G, hurry up Samsung!
Deep sleep issue is fixed.
cewrld said:
Deep sleep issue is fixed.
Click to expand...
Click to collapse
Very good news!! If i am in custom now, can i flash stock directly by odin?
Thnx
Hazel76 said:
Very good news!! If i am in custom now, can i flash stock directly by odin?
Thnx
Click to expand...
Click to collapse
Yes, I flashed via Odin (4 files version), but you might need to do factory reset from recovery.
cewrld said:
Yes, I flashed via Odin (4 files version), but you might need to do factory reset from recovery.
Click to expand...
Click to collapse
Thanks! Then is no problem if the phone is rooted or not,right? I reset everything from recovery and then flash via odin?
Or is better restore from recovery to MM and then flash? It is my first time and i feel very lost
cewrld said:
Yes, I flashed via Odin (4 files version), but you might need to do factory reset from recovery.
Click to expand...
Click to collapse
Where do You find 4 files Nougat ROM?
Hazel76 said:
Very good news!! If i am in custom now, can i flash stock directly by odin?
Thnx
Click to expand...
Click to collapse
1)No need to restore MM backup from recovery and then flash
2)You can flash it directly using odin, after successfully flashed factory reset your phone through stock recovery
3)Also you can flash it by complete wipe from twrp recovery
4)Since your running custom rom usb debugging and oem unlocking are already eanbled but be sure once before flashing
Note-Be sure Usb debugging And Oem Unlocking options are enabled from developers option before flashing thorugh odin (Go to setting>about device>software info>Tap build no for 7-8 times until you see developers option is enabled, You can find setting>developers option mostly below about device..From there make sure usb debugging and oem unlocking is enabled)
FLASH ONLY IF YOUR DEVICE IS SUPPORTED BY THIS TURKEY BUILD AND FOLLOW PROPER ODIN FLASHING GUIDE YOU CAN FIND EASILY ANYWHERE IN FORUM

Problem in Cyanogenmod 11 after inserting SIM Card

Hi There !
today i flashed Cyanogenmod 11 on my s5360 and its Gapps Then i turned of my phone and inserted my SIM Card then tuned my phone back on but it freezed on start up
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Where you get that rom?
noob&noob said:
Where you get that rom?
Click to expand...
Click to collapse
From XDA https://forum.xda-developers.com/showthread.php?t=2765874
WarCrier said:
From XDA https://forum.xda-developers.com/showthread.php?t=2765874
Click to expand...
Click to collapse
You can try other cm11 rom, may be it will solve your problem...
noob&noob said:
You can try other cm11 rom, may be it will solve your problem...
Click to expand...
Click to collapse
lol,it's due to his baseband dude
---------- Post added at 12:49 PM ---------- Previous post was at 12:48 PM ----------
to fix this,go back to stock rom and install the correct stock rom and baseband for your region .
WarCrier said:
Hi There !
today i flashed Cyanogenmod 11 on my s5360 and its Gapps Then i turned of my phone and inserted my SIM Card then tuned my phone back on but it freezed on start up
Click to expand...
Click to collapse
same happend to me thats why im here
FIX
WarCrier said:
Hi There !
today i flashed Cyanogenmod 11 on my s5360 and its Gapps Then i turned of my phone and inserted my SIM Card then tuned my phone back on but it freezed on start up
Click to expand...
Click to collapse
i fixed it by flashing CSC and MODEM in odin:laugh:
Skunkser said:
i fixed it by flashing CSC and MODEM in odin:laugh:
Click to expand...
Click to collapse
It's happened to me too. What utility can unpack TAR.MD5 files so I/we can get at the the CSC and MODEM files? Perhaps 7Zip for Windows? Is there a good Linux utility?
---------- Post added at 06:03 AM ---------- Previous post was at 05:58 AM ----------
Laugh2 said:
It's happened to me too. What utility can unpack TAR.MD5 files so I/we can get at the the CSC and MODEM files? Perhaps 7Zip for Windows? Is there a good Linux utility?
---------- Post added at 06:03 AM ---------- Previous post was at 05:58 AM ----------
It's happened to me too. What utility can unpack TAR.MD5 files so I/we can get at the CSC and MODEM files? Perhpas 7Zip for Windows? Is there a good Linux utility?
---------- Post added at 06:04 AM ---------- Previous post was at 06:03 AM ----------
It's happened to me too. What utility can unpack TAR.MD5 files so I/we can get at the CSC and MODEM files? Perhpas 7Zip for Windows? Is there a good Linux utility?
Click to expand...
Click to collapse
Once you got that file,turn your phone into download mode and open odin on you pc,then connect the phone to the pc via the usb cable then chose modem and csc . chose start,done
vdhero said:
Once you got that file,turn your phone into download mode and open odin on you pc,then connect the phone to the pc via the usb cable then chose modem and csc . chose start,done
Click to expand...
Click to collapse
Thanks, for your reply. The idea is to extract the CSC and MODEM files to use with other ROMs. I found a utility called Odinatrix, which can unpack the old stock ROMs which other programs such as 7Zip couldn't deal with. It worked first time and has helped re-animate an old mobile, which has been lying (almost) bricked for a year or more.
Laugh2 said:
Thanks, for your reply. The idea is to extract the CSC and MODEM files to use with other ROMs. I found a utility called Odinatrix, which can unpack the old stock ROMs which other programs such as 7Zip couldn't deal with. It worked first time and has helped re-animate an old mobile, which has been lying (almost) bricked for a year or more.
Click to expand...
Click to collapse
Nice,I haven't heard of it but odin is still the best option for me. Thanks anyway
vdhero said:
Nice,I haven't heard of it but odin is still the best option for me. Thanks anyway
Click to expand...
Click to collapse
Yes, Odin is fine for flashing but only after you've got your ROM sorted out.
Because Custom ROMs either include no modem software or include modem software for other countries then I often have to find modem and CSC info from other sources (such as Stock ROMs). Hence the need to unpack old TAR.MD5 files for Stock ROMs before using Odin/Heinmdall/JOdin to flash. Sometimes the ROMs have been so old that 7.zip et al won't touch them - hence it was very pleasing that Odinatrix did actually work.
Sir I have the same problem with my sgy it freezes on the boot when I insert the sim and now my sim is not working after flashing the stock rom please help

Android 8.0 Oreo Beta registrations starts on October 31

I case you didn't hear about this!
Here is the article on SamMobile: https://www.sammobile.com/2017/10/26/galaxy-s8-oreo-beta-program-may-go-live-us-october-31/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Really?
Let's see
Well it is always speculation with firmware updates and Samsung until we actually get an update.
tecksulfur said:
I case you didn't hear about this!
Here is the article on SamMobile: https://www.sammobile.com/2017/10/26/galaxy-s8-oreo-beta-program-may-go-live-us-october-31/
Click to expand...
Click to collapse
Sammobile is not opening for me since yesterday using Samsung internet
Laleka said:
Sammobile is not opening for me since yesterday using Samsung internet
Click to expand...
Click to collapse
Working just fine, maybe it's your DNS, or cache? ( I use Samsung Internet Beta )
tecksulfur said:
I case you didn't hear about this!
Here is the article on SamMobile: https://www.sammobile.com/2017/10/26/galaxy-s8-oreo-beta-program-may-go-live-us-october-31/
Click to expand...
Click to collapse
Correct, and it will be also available for United Kingdom & Korea; date is not confirmed yet...
In the 2nd phase, registering will also be opened for Germany, Spain, France, Poland, India & China
More info will be revealed by Samsung this week...
Source: Galaxy S8 Oreo beta program will go live in these countries
@Dejan Kruljac : the only thing FAKE is your post, AND the person you admire on the GIF
I'm currently running the EE firmware on the international version. I assume the beta will only be available for the unlocked variant (BTU/XEU CSC. Therefore I want to be prepared in advance. Can I just download the latest BTU or XEU firmware from Sam Mobile and then I will be eligible for the beta program? After looking through the various firmware threads, there seems to be conflicting reports about how to flash a rom which will permanently change the CSC. Will flashing the BTU or XEU firmware suffice? I've also seen people have success with flashing a multi csc rom and change the csc via the (old samsung method) dialer method using the imei number - which will also reset the device. Can anyone confirm the current method?
Thanks
redbullman said:
I'm currently running the EE firmware on the international version. I assume the beta will only be available for the unlocked variant (BTU/XEU CSC. Therefore I want to be prepared in advance. Can I just download the latest BTU or XEU firmware from Sam Mobile and then I will be eligible for the beta program? After looking through the various firmware threads, there seems to be conflicting reports about how to flash a rom which will permanently change the CSC. Will flashing the BTU or XEU firmware suffice? I've also seen people have success with flashing a multi csc rom and change the csc via the (old samsung method) dialer method using the imei number - which will also reset the device. Can anyone confirm the current method?
Thanks
Click to expand...
Click to collapse
You can't permachange CSC by flashing one, the final CSC is hard coded at a lower level on non-flashed storage that would require root to adjust (but you could unroot right after) and a fairly comprehensive understanding of tw
partcyborg said:
You can't permachange CSC by flashing one, the final CSC is hard coded at a lower level on non-flashed storage that would require root to adjust (but you could unroot right after) and a fairly comprehensive understanding of tw
Click to expand...
Click to collapse
Thanks. I yesterday flashed the latest October security update Samsung rom with oxm csc. The csc has now changed to xeu, which is one of the 2 unlocked carrier free cscs in the UK so I'm happy. All ready for the oreo beta now!
Hello, Which one exactly did you flash? and where can i download it?
---------- Post added at 06:23 PM ---------- Previous post was at 06:21 PM ----------
redbullman said:
Thanks. I yesterday flashed the latest October security update Samsung rom with oxm csc. The csc has now changed to xeu, which is one of the 2 unlocked carrier free cscs in the UK so I'm happy. All ready for the oreo beta now!
Click to expand...
Click to collapse
Can you please specify which firmware you flashed? Which country ...? or can you post the link to download it?
31 october 2018 i think
As 2017 nothing comes at it
redbullman said:
Thanks. I yesterday flashed the latest October security update Samsung rom with oxm csc. The csc has now changed to xeu, which is one of the 2 unlocked carrier free cscs in the UK so I'm happy. All ready for the oreo beta now!
Click to expand...
Click to collapse
You get it only, when "Software Serviceprovider" (in Version info) shows:
XEU/XEU/*** (where *** is the product-code of your device which you can't change!)
---------- Post added at 08:15 PM ---------- Previous post was at 08:12 PM ----------
phil.asmar said:
Hello, Which one exactly did you flash? and where can i download it?
---------- Post added at 06:23 PM ---------- Previous post was at 06:21 PM ----------
Can you please specify which firmware you flashed? Which country ...? or can you post the link to download it?
Click to expand...
Click to collapse
XEU is part of the Multi-CSC OXM (which all unbranded Europeans phones have)...
If you DON'T have a UK-SIM card, you CAN'T change your phone to XEU! A UK-SIM card must be in your device, reset it, and your CSC will change to XEU/XEU/*** (where *** is the product-code of your device)
henklbr said:
You get it only, when "Software Serviceprovider" (in Version info) shows:
XEU/XEU/*** (where *** is the product-code of your device which you can't change!)
Do you know that for sure? Because changing csc works for normal ota updates. Why would it not work for the oreo beta? Makes no sense.
My csc is now xeu/xeu/evr. You sure I won't get It? You're the first person to suggest amending the csc won't work with the oreo beta.
Click to expand...
Click to collapse
redbullman said:
henklbr said:
You get it only, when "Software Serviceprovider" (in Version info) shows:
XEU/XEU/*** (where *** is the product-code of your device which you can't change!)
Do you know that for sure? Because changing csc works for normal ota updates. Why would it not work for the oreo beta? Makes no sense.
My csc is now xeu/xeu/evr. You sure I won't get It? You're the first person to suggest amending the csc won't work with the oreo beta.
Click to expand...
Click to collapse
You will get it, because the 1st 2 are the same; the last one, EVR, can't be changed because that's your Product-code
With XEU/XEU/EVR you WILL receive XEU-updates
Click to expand...
Click to collapse
henklbr said:
redbullman said:
You will get it, because the 1st 2 are the same; the last one, EVR, can't be changed because that's your Product-code
With XEU/XEU/EVR you WILL receive XEU-updates
Click to expand...
Click to collapse
Great thanks!
Click to expand...
Click to collapse

Zuk Z2 Baseband Flashing Guide

Flashing basebands via twrp may cause soft brick and locking of bootloader and flashing whole rom in qpst is a long process. Flashing baseband via fastboot is fast and safe.
Requirements:
1. ADB and Fastboot installed
2. ZUK USB driver
3. NON-HLOS.bin
Steps:
1. Install adb and fastboot and zuk usb driver.
2. Download modem (NON-HLOS.bin)
3. Copy it to the folder where fastboot is installed
4. Open command prompt in the same folder
5. Put this commands
Code:
fastboot flash modem NON-HLOS.bin
Code:
fastboot erase modemst1
Code:
fastboot erase modemst2
Code:
fastboot reboot
NOTE: If you are using VoLte make backup of efs partition before flashing rom in twrp. Restore after flashing baseband
Links:
9-00009-M8996FAAAANAZM-1.53476.1.zip
9-00026-M8996FAAAANAZM-1.63821.1.zip
M8996FAAAANAZM-1.70664.3.76387.1.zip
M8996FAAAANAZM-1.76387.1.92759.1.zip
reserved
Thanks to all people who have sent their modem so that I can share with you
Nice
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
No need to flash via fastboot, baseband can be flashed via twrp recovery without bricking the device. I already wrote a guide regarding this:
https://forum.xda-developers.com/lenovo-zuk-z2/how-to/guide-flash-firmware-twrp-relocking-t3576196
doesn't work. No audio call in & out!
mklucc said:
doesn't work. No audio call in & out!
Click to expand...
Click to collapse
Flash again
miju12 said:
Flash again
Click to expand...
Click to collapse
i tried many times
mja123 said:
No need to flash via fastboot, baseband can be flashed via twrp recovery without bricking the device. I already wrote a guide regarding this:
https://forum.xda-developers.com/lenovo-zuk-z2/how-to/guide-flash-firmware-twrp-relocking-t3576196
Click to expand...
Click to collapse
whats the issue if somebody flashes in fastboot?
mklucc said:
i tried many times
Click to expand...
Click to collapse
Which baseband?
miju12 said:
Which baseband?
Click to expand...
Click to collapse
M8996FAAAANAZM-1.70664.3.76387.1.zip
M8996FAAAANAZM-1.76387.1.92759.1.zip
and then i came back to my original
9-00026-M8996FAAAANAZM-1.63821.1.zip
mklucc said:
M8996FAAAANAZM-1.70664.3.76387.1.zip
M8996FAAAANAZM-1.76387.1.92759.1.zip
and then i came back to my original
9-00026-M8996FAAAANAZM-1.63821.1.zip
Click to expand...
Click to collapse
i have myself tested flashing all the basebands and works well. Which network operator you are using?
miju12 said:
i have myself tested flashing all the basebands and works well. Which network operator you are using?
Click to expand...
Click to collapse
Vodafone
mklucc said:
Vodafone
Click to expand...
Click to collapse
Make backup of efs partition in twrp. Flash 1.70 baseband and restore the efs and see if voice is working or not
miju12 said:
Make backup of efs partition in twrp. Flash 1.70 baseband and restore the efs and see if voice is working or not
Click to expand...
Click to collapse
Do this delete my rom?
mklucc said:
Do this delete my rom?
Click to expand...
Click to collapse
No
There is baseband v2.0
What's the procedure for that? And how to escape bootloader rebooting?
Is v2.0 any better?
subhrabhadra said:
There is baseband v2.0
What's the procedure for that? And how to escape bootloader rebooting?
Is v2.0 any better?
Click to expand...
Click to collapse
I haven't seen any 2.0 baseband
miju12 said:
No
Click to expand...
Click to collapse
baseband 1.76 doesn't work. Now try 1.70
---------- Post added at 06:47 PM ---------- Previous post was at 06:42 PM ----------
even baseband 1.70 does not work
mklucc said:
baseband 1.76 doesn't work. Now try 1.70
---------- Post added at 06:47 PM ---------- Previous post was at 06:42 PM ----------
even baseband 1.70 does not work
Click to expand...
Click to collapse
Okay. So which ROM you are in? And what was the last stock ROM you have flashed?

Categories

Resources