Database Users

Bricked Zenfone 3 (ZE552KL)

Hi there.
I bought this phone only yesterday and the first thing I did (of course) was update it to Nougat (7.0) and root it. I installed TWRP.
Due to some bugs and functionality issues, I decided to factory reset my phone (through the settings app) however the phone will now no longer load past the "ASUS" boot logo.
I have tried all of the following to fix my issue, to no avail.
[X] denotes failed attempt. [O] denotes successful attempt.
Safe Mode [X]
Hard Reset [X]
--- Recovery Mode (phone will not boot into recovery) [X]
--- Built in settings [X]
Clear App Data Cache [X]
--- Recovery mode (phone will not boot into recovery) [X]
SP Flash tool
--- Scatter File (cannot get with bricked phone)
Copy original firmware file onto SD Card [X]
Install USB drivers for windows [O]
I believe the best solution is to fix it using a scatter file through SP Flash tool, however the MSM8953 scatter file does not seem to exist online for download. If anyone with an Asus Zenfone 3 could google search "Create a scatter file for android phones" and upload the scatter file they create - I would greatly appreciate it. Any other suggestions are kindly welcomed.
Thank you.

I don't know if it helps, but there's a post https://forum.xda-developers.com/zenfone-3/help/unbricking-zenfone-3-ze552kl-dm-verity-t3563970 ; correct me if I'm wrong but isn't SP Flash tool meant for mediatek device? As far as I'm concerned, ze552kl is powered by Snapdragon 625.

sanctitude888 said:
I don't know if it helps, but there's a post https://forum.xda-developers.com/zenfone-3/help/unbricking-zenfone-3-ze552kl-dm-verity-t3563970 ; correct me if I'm wrong but isn't SP Flash tool meant for mediatek device? As far as I'm concerned, ze552kl is powered by Snapdragon 625.
Click to expand...
Click to collapse
Thanks so much for this, hadn't stumbled across it. I'll give his unbricking steps a go tomorrow. Hopefully it works; its a method I haven't tried yet so there is hope!

[/CITAR]
Funcionou ?

Oppo F1s error in SP FLash Tool {BROM ERROR: STATUS_EXT_RAM_EXCEPTION (0xC0050005)}

Hi every one. I m facing this problem when i try to flash oppo f1s . I have downloaded too many firmwares from different websites but every rom giving this error.
When download bar completed in sp flash tool then it got stuck and after 50 to 60 seconds this error comes. I need help how to fix it?

Error solving method
mfaraz1000 said:
Hi every one. I m facing this problem when i try to flash oppo f1s . I have downloaded too many firmwares from different websites but every rom giving this error.
When download bar completed in sp flash tool then it got stuck and after 50 to 60 seconds this error comes. I need help how to fix it?
Click to expand...
Click to collapse
That usually happens due to overload of firmware's or error in detection etc,
method to fix:Get the scatter file:
Flash tools step1:
1) Just copy the below code and rename it as .txt and use it as the scatter file.
2) Have the preloader file=preloader_oppo6750_15131.bin -> this is the version of preloader.
3) Get the system image of the oppo f1s stock rom.
4) Open flash tools , locate scatter file and open it,
->make sure bot the files system image and preloader are properly loaded.
5) Run flash tools to "Format + download" , Connect phone to pc ("Hold volume + and - at the same time and connect the usb cable and wait until detection is complete.
6)when done proceed to step 2
download tools step 2:
1) open download tools.exe, have the scatter file already download, click on download all.
2) The Green icons turn blue, wait for the process to complete,
3) Reboot
The files required are in particular places but just search for the yakub method on google,you will get the files for the oppo f1s,
I had this haappen to me and i was able to fix it using this method.

stasus_ext_ram_exception

meteemp said:
That usually happens due to overload of firmware's or error in detection etc,
method to fix:Get the scatter file:
Flash tools step1:
1) Just copy the below code and rename it as .txt and use it as the scatter file.
2) Have the preloader file=preloader_oppo6750_15131.bin -> this is the version of preloader.
3) Get the system image of the oppo f1s stock rom.
4) Open flash tools , locate scatter file and open it,
->make sure bot the files system image and preloader are properly loaded.
5) Run flash tools to "Format + download" , Connect phone to pc ("Hold volume + and - at the same time and connect the usb cable and wait until detection is complete.
6)when done proceed to step 2
download tools step 2:
1) open download tools.exe, have the scatter file already download, click on download all.
2) The Green icons turn blue, wait for the process to complete,
3) Reboot
The files required are in particular places but just search for the yakub method on google,you will get the files for the oppo f1s,
I had this haappen to me and i was able to fix it using this method.
Click to expand...
Click to collapse
I'm having this same mistake with the Leagoo Kiicaa Mix, could you help me?

mfaraz1000 said:
Hi every one. I m facing this problem when i try to flash oppo f1s . I have downloaded too many firmwares from different websites but every rom giving this error.
When download bar completed in sp flash tool then it got stuck and after 50 to 60 seconds this error comes. I need help how to fix it?
Click to expand...
Click to collapse
uncheck the following given file names in the error box from the list of files one by one, the error will be solved

Oppo F1s A1601 IMEI.info: MediaTek MT6750 Firmware | Flash solution
OPPO F1s A1601​ solution

Lenovo Tablet 2 1050L boot failure after attempted root

hi - I hope someone can help me. I have a LTE enabled Lenovo Tablet 2 1050L which I attempted to root using the instructions given here ... https://forum.xda-developers.com/thinkpad-tablet/general/how-to-root-yoga-tablet-2-t3251571 ... but I have managed to brick my device. I successfully installed SuperSU but then read that Magisk was better and tried the same procedure with that but it didn't work. Now when the tablet starts up, I get a message which says ... "EFILINUX ERROR [android_image_start_buffer:737] boot image digital signature verification failed : 0000001A" which appears over the initial Lenovo splash screen. I then get to the Android system recovery menu but I can't get the table any further than this. I have tried wiping data / factory resetting but this does not work.
I can boot the tablet into recovery mode using CWM or TWRP but I have no idea what to do now. I guess I shouldn't have messed. I hope someone can help - I've tried the official Lenovo forums but no one has answered in a week.
Kind regards

I've downloaded this ROM ... lenovo-forums.ru/files/file/1074-yoga-tablet-2-10-yt2-1050l_s100192_151119_row_los-50 ... and flashed this onto my tablet using the Intel flash tool and everything seems to be back up and running.
Can someone confirm that this is safe to do? Can I trust this ROM as it's not from an official source?
Thanks

have bricked z301ml

hi all
my freind offer me bricked zenpad 10 z301 series reboot on screen asus no command
when i try to reflash it it show me that chip is mt6735 which isnt z301 and there is no z301 with this chip thats mean is flashed with wrong rom how the owner did i dont know and all z301 is mt8163
and all firmware from asus site are with wrong scatter files and with wrong files : system.new.dat system.patch.dat scatter.txt file_contexts.bin ect.....
i try some scatter file in the net for z301 and convert .dat image to img said bad chip wrong bootrom
i dont know how this tablet took mt6735 and it wont took otherelse
on front tablet zenpad 10 z301serie
under cover z301ml somewhere
any help will really appreciate
thanx

It should have the MT8735W chip according to the specs on https://www.asus.com/Tablets/ASUS-ZenPad-10-Z301ML/specifications/
Can you get into recovery from the "no command" screen (by pressing power + volume up) ? Did it fail to flash stock rom from that recovery screen?
Tried to get into fastboot to boot/flash boot.img or recovery.img?

Help Table lenovo M10 X306f android 11

hello guys, I have a lenovo tab m10 x306f tablet, I tried to flash it to change the android and it bricked, I recovered it with the lenovo recovery tool, but now it gives me this message and if I don't press on 4 seconds it doesn't come up, android , I tried flashing with spflash and it gives me this error, I changed PC, windows, and the same error, could someone help me please, since it is my work tool, thanks
when i try to sp flash give this error
error status brom cmd send da fail 0xc006003
i change lot windows and same error with sp , and change different version and same thanx

What did you flash? Can you boot into fastboot, bootloader, or recovery?