Related
Hi,
I think my P9 Lite is bricked (L31) :crying:
It happened because I've tried to downgrade from Android N EMUI 5 beta to Android M (EMUI 4.1.1) with the dload folder method. I've extracted and put update.app of my B151 firmware inside then 3 buttons and update said successful, but now bootloop and I can't enter recovery or fastboot (vol down + pwr).... I'm stuck in eRecovery and Wifi check for update fails....
>>> EDIT: Okay, good, I can enter fastboot but it says:
"Please connect usb cable, blah blah" (My phone is connected)
Android boot reason
AP_S_COLDBOOT
NA
Volume_down_press_process_func
PHONE locked
FRP Unlock
----
Do I have to unlock the bootloader? If yes, how can I do since I can't boot on Android?
Can I unlock it with fastboot commands or other ways? How?
----
Currently, with fastboot commands, I can't flash system.img or recovery.img. For instance, trying to flash system.img or recovery.img, it says:
C:\Users\Supergren>fastboot flash system "d:/system.img"
target reported max download size of 471859200 bytes
sending sparse 'system' (451070 KB)...
OKAY [ 19.381s]
writing 'system'...
FAILED (remote: Command not allowed)
finished. total time: 19.395s
I guess it's because my bootloader is locked...
I'm a bit lost
>>> EDIT 2: to solve the bootloop after downgrading from N beta to M (b151), I just had to:
1- Shutdown my phone
2- Plug to my computer. That's what I forgot previously to be able to start fastboot mode!
3- Press Volume down + PWR
4- Once in fastboot/rescue mode, open cmd window on my PC and type:
fastboot oem unlock <unlock code> . (For instance: fastboot oem unlock 1234567890123456)
5- Follow unlock procedure instructions and then the phone does a factory reset.
6- The phone reboots and it's done
Wood Man said:
Hi,
I think my P9 Lite is bricked (L31) :crying:
I can enter fastboot but it says:
"Please connect usb cable, blah blah" (My phone is connected)
Android boot reason
AP_S_COLDBOOT
NA
Volume_down_press_process_func
PHONE locked
FRP Unlock
----
Do I have to unlock the bootloader? If yes, how can I do since I can't boot on Android?
Can I unlock it with fastboot commands or other ways? How?
----
Currently, with fastboot commands, I can't flash system.img or recovery.img. For instance, trying to flash system.img or recovery.img, it says;
...
FAILED (remote: Command not allowed)
...
I guess it's because my bootloader is locked...
I'm a bit lost
Click to expand...
Click to collapse
Maybe unlocking the bootloader may help. On fastboot you type fastboot oem unlock
Wood Man said:
Hi,
I think my P9 Lite is bricked (L31) :crying:
I can enter fastboot but it says:
"Please connect usb cable, blah blah" (My phone is connected)
Android boot reason
AP_S_COLDBOOT
NA
Volume_down_press_process_func
PHONE locked
FRP Unlock
----
Do I have to unlock the bootloader? If yes, how can I do since I can't boot on Android?
Can I unlock it with fastboot commands or other ways? How?
----
Currently, with fastboot commands, I can't flash system.img or recovery.img. For instance, trying to flash system.img or recovery.img, it says;
...
FAILED (remote: Command not allowed)
...
I guess it's because my bootloader is locked...
I'm a bit lost
Click to expand...
Click to collapse
To unlock bootloader type ,,fastboot oem unlock.......,,(.....is your unlock code)
To unlock the bootloadee you have to type :
fastboot oem unlock 1234567891234
Sent from my HUAWEI VNS-L31 using XDA Labs
You are all gods! It's solved!
Thanks a lot guys! I really appreciate your fast answers :good:
I've read on the web about the "fastboot oem unlock" method but I didn't know if it worked with P9 Lite. I was afraid to totally brick the phone.
See you later!
Edit: I've updated the thread title with [SOLVED] and wrote what I did to achieve this.
Hey ! You got the same problem as me, excuse me how did you get the unlock code if you couldn't boot the phone... I read and read and your problem was the same i have ... but when i got to fastboot i can't unlock, i dont have the unlock code sh**. Thank you and sorry for my english everybody i hope your eyes didn't hurt hehe
EDIT: I just got the unlock code but I think i'm screwed up... When in fastboot&rescue mode it says FRP Lock... sh**
1francis said:
Hey ! You got the same problem as me, excuse me how did you get the unlock code if you couldn't boot the phone... I read and read and your problem was the same i have ... but when i got to fastboot i can't unlock, i dont have the unlock code sh**. Thank you and sorry for my english everybody i hope your eyes didn't hurt hehe
EDIT: I just got the unlock code but I think i'm screwed up... When in fastboot&rescue mode it says FRP Lock... sh**
Click to expand...
Click to collapse
Frp lock means Factory Reset Protection. If it says Phone UNLOCKED means ur bootloader is unlocked.
1francis said:
Hey ! You got the same problem as me, excuse me how did you get the unlock code if you couldn't boot the phone... I read and read and your problem was the same i have ... but when i got to fastboot i can't unlock, i dont have the unlock code sh**. Thank you and sorry for my english everybody i hope your eyes didn't hurt hehe
EDIT: I just got the unlock code but I think i'm screwed up... When in fastboot&rescue mode it says FRP Lock... sh**
Click to expand...
Click to collapse
go to developer option and activate oem unlocking
this will unlock frp
Right. The issue is that phone is stuck on huawei logo
1francis said:
Right. The issue is that phone is stuck on huawei logo
Click to expand...
Click to collapse
Buy DC phoenix 15euros and flash it same happen to me last day
Hi, I'm seeking help in retruning my p9 lite back to stock rom - I'll try to account for all the steps i've done so far:
P9 lite dual sim but the operator limited it to only using 1 sim, so I used the VNS-L21-L22-L31 Toolkit to fix the problem
Everything went fine until I used the huawei app to upgrade to emui5; After reboot the phone was on build NRD90M test-keys without bluetooth and without any keyboard, only google voice for input.
eRecovery does not work - goes to 5% and gives a error;
I followed the guides to install trwp in an attempt to flash a stock ROM,
issued the following commands:
fastboot oem unlock [the code]
fastboot flash recovery recovery_twrp.img
fastboot reboot
all commands returned without error, but still cant boot into trwp using volume up & power.
Up on reboot, it shows the message saying that my device was unlocked and can't be trusted bla, bla bla and booting now and that's it.
I've tried putting the update.app in the sd card's dload folder but nothing.
Any suggestions?
Thanks
fjpmota said:
Hi, I'm seeking help in retruning my p9 lite back to stock rom - I'll try to account for all the steps i've done so far:
P9 lite dual sim but the operator limited it to only using 1 sim, so I used the VNS-L21-L22-L31 Toolkit to fix the problem
Everything went fine until I used the huawei app to upgrade to emui5; After reboot the phone was on build NRD90M test-keys without bluetooth and without any keyboard, only google voice for input.
eRecovery does not work - goes to 5% and gives a error;
I followed the guides to install trwp in an attempt to flash a stock ROM,
issued the following commands:
fastboot oem unlock [the code]
fastboot flash recovery recovery_twrp.img
fastboot reboot
all commands returned without error, but still cant boot into trwp using volume up & power.
Up on reboot, it shows the message saying that my device was unlocked and can't be trusted bla, bla bla and booting now and that's it.
I've tried putting the update.app in the sd card's dload folder but nothing.
Any suggestions?
Thanks
Click to expand...
Click to collapse
did you try to reboot to recovery from adb or with the toolkit?
fjpmota said:
Hi, I'm seeking help in retruning my p9 lite back to stock rom - I'll try to account for all the steps i've done so far:
P9 lite dual sim but the operator limited it to only using 1 sim, so I used the VNS-L21-L22-L31 Toolkit to fix the problem
Everything went fine until I used the huawei app to upgrade to emui5; After reboot the phone was on build NRD90M test-keys without bluetooth and without any keyboard, only google voice for input.
eRecovery does not work - goes to 5% and gives a error;
I followed the guides to install trwp in an attempt to flash a stock ROM,
issued the following commands:
fastboot oem unlock [the code]
fastboot flash recovery recovery_twrp.img
fastboot reboot
all commands returned without error, but still cant boot into trwp using volume up & power.
Up on reboot, it shows the message saying that my device was unlocked and can't be trusted bla, bla bla and booting now and that's it.
I've tried putting the update.app in the sd card's dload folder but nothing.
Any suggestions?
Thanks
Click to expand...
Click to collapse
Had the same problem,try installing different versions of twrp,Meticulus one is the only one that worked for me ,so try it
I've tried from both...
the last try was done from adb. Here's the log:
> adb reboot bootloader
>fastboot devices
4TE7N1711000XXXX fastboot
>fastboot flash recovery recovery_twrp.img
target reported max download size of 471859200 bytes
sending 'recovery' (28928 KB)...
OKAY [ 0.780s]
writing 'recovery'...
OKAY [ 0.640s]
finished. total time: 1.420s
>fastboot reboot
rebooting...
finished. total time: 0.031s
>adb reboot recovery
Then the phone reboots, shows the "You'r device was unlocked and can't be trusted" message and after that "Your device is booting now..." and stays there...
I'm going nuts with this...
sirjohnrl said:
Had the same problem,try installing different versions of twrp,Meticulus one is the only one that worked for me ,so try it
Click to expand...
Click to collapse
I've looked at it, but didn't try it - on the download page it states "*This recovery is NOT compatible with EMUI 5.0 +"... and i'm on 5.0...
fjpmota said:
I've looked at it, but didn't try it - on the download page it states "*This recovery is NOT compatible with EMUI 5.0 +"... and i'm on 5.0...
Click to expand...
Click to collapse
I was also on emui 5 when I installed it,and it worked for me
sirjohnrl said:
I was also on emui 5 when I installed it,and it worked for me
Click to expand...
Click to collapse
Oh, ok then. I´ll give it a go.
Thank's
fjpmota said:
Oh, ok then. I´ll give it a go.
Thank's
Click to expand...
Click to collapse
Tried it - sadly, i got the same behavior as before.
To recap, connected the phone to pc, did
> adb reboot bootloader
>fastboot flash recovery recovery.img (using meticulus file)
>fastboot reboot
>adb reboot recovery
and got stuck on "your device is booting now..."
Arg!
I have tried downgraded my phone from nougat, but has ended in at bootloop only showing the red Huawei Logo.
Now i can´t enter recovery, can´t update using 3 button method only thing i can access is fastboot.
My problem is my bootloader is locked and therefore i can´t flash an recovery. And now i cannot figure out how to obtain my product key, so i can unlock the bootloader.
Any1 who can help me with this would be much appreciate.
What did you do exactly to end with endless bootloop?
I used the rollback file from this Thread:
https://forum.xda-developers.com/hu...torial-rollback-n-to-mm-c432-devices-t3563955
Update went fine but afterwards it ended in a bootloop. The only thing i can access is fastboot.
The weird thing is that in fastboot it says my bootlader is unlocked with red, but i cant install an recovery. Its says acess denied and ask if i'm sure my bootloader is unlocked.
And thats why im back to trying to unlock the bootloader but i cant get the product id for my phone when i can't turn in on.. seems hopeless
I suppose that you did 3 button update metod. You have to factory reset phone. Press volume up and power button together and keep pressed until you see erecovery option for factory reset phone. Do it.
KAngelo said:
I have tried downgraded my phone from nougat, but has ended in at bootloop only showing the red Huawei Logo.
Now i can´t enter recovery, can´t update using 3 button method only thing i can access is fastboot.
My problem is my bootloader is locked and therefore i can´t flash an recovery. And now i cannot figure out how to obtain my product key, so i can unlock the bootloader.
Any1 who can help me with this would be much appreciate.
Click to expand...
Click to collapse
Post here IMEI+SN and i can try to get you bootloader unlock code.
gtdaniel said:
Post here IMEI+SN and i can try to get you bootloader unlock code.
Click to expand...
Click to collapse
Imei1: 863066034949799
Imei2: 863066034975810
Can't remember which is the right one
Sn: FUH7N16A08001972
Thank you so much for the help
maka1105 said:
I suppose that you did 3 button update metod. You have to factory reset phone. Press volume up and power button together and keep pressed until you see erecovery option for factory reset phone. Do it.
Click to expand...
Click to collapse
I cant. Have tried all the button combinations to enter both recovery and update mode but nothing works, only vibrates and showing huawei logo. Only thing i can access is fastboot through computer
With huawei extractor extract (from B160 or what ever firmware is your phone) system, boot, and recovery img and flash with adb. Than you have to do reset.
maka1105 said:
With huawei extractor extract (from B160 or what ever firmware is your phone) system, boot, and recovery img and flash with adb. Than you have to do reset.
Click to expand...
Click to collapse
Thanks for the suggestion.
When i try flashing it with adb it starts writing but then says "Failed (remote: Command not allowed)
Should have installed the proper drivers but still not working.
Same thing if try flashing with the L31 toolkit. Here it says "Something went wrong! - Maybe your boot-loader is locked?"
The only thing i can think of, is trying to unlock my bootloader again and see if its work. Even though it says unlocked in fastboot mode. But for that i still need the product id for my phone which i can´t get???
KAngelo said:
Imei1: 863066034949799
Imei2: 863066034975810
Can't remember which is the right one
Sn: FUH7N16A08001972
Thank you so much for the help
Click to expand...
Click to collapse
Your bootloader unlock code is: 1216684107248235
PS: until you unlock bootloader you can not flash anything...
Need Correct Firmware
i downgraded set 7.0 to 6.0 than this problem came
huawei
VNS-L31
imei
869315022035713
866655025440904
i have set not going in fastboot for install TWRP etc
set only going in upgrade mode when i Power UP but i tried but cant install UPDATE.APP via SD card because it always stop at 5% installing update
maplegsm said:
i downgraded set 7.0 to 6.0 than this problem came
huawei
VNS-L31
imei
869315022035713
866655025440904
i have set not going in fastboot for install TWRP etc
set only going in upgrade mode when i Power UP but i tried but cant install UPDATE.APP via SD card because it always stop at 5% installing update
Click to expand...
Click to collapse
You need corect oeminfo...
i restore set in fastboot mode but i cant install twrp or any other recovery
i also need bootloader unlock code
C:\>fastboot devices
3DN7N16427001072 fastboot
C:\>fastboot flash recovery twrp.img
target reported max download size of 471859200 bytes
sending 'recovery' (27434 KB)...
OKAY [ 0.938s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.944s
C:\>
C:\>fastboot oem get-bootinfo
...
(bootloader) unlocked
OKAY [ 0.006s]
finished. total time: 0.006s
C:\>
dc unlocker info
Found Phone : HUAWEI VNS-L31
Model : Huawei phone in fastboot mode
IMEI : 869315022035713
Serial NR. : 3DN7N16427001072
Firmware : NRD90M test-keys
IMEI:866655025440904
FB LockState: LOCKED
USER LockState: LOCKED
unlocked
Battery state: 0
delete
gtdaniel said:
Your bootloader unlock code is: 1216684107248235
PS: until you unlock bootloader you can not flash anything...
Click to expand...
Click to collapse
Thanks man! my bootloader is now unlocked
But now i ran in to the next problem. Im able to flash now in adb but i cant seem to enter recovery? I tried flashing many different recoveries and the button combinations to enter them but i cant?
Any idea what to do
I Have the same problem. I cannot flash any recovery and files .img How to fix that?
I can boot to fastboot.
bootloop also, can do nothing
gtdaniel said:
Your bootloader unlock code is: 1216684107248235
PS: until you unlock bootloader you can not flash anything...
Click to expand...
Click to collapse
hello sir, could i also get the unlock bootloader code. RIGHT know, my phone in bootloop state. I have my bootloader lock, I can't enter fastboot. Nothing can do. here is my imei and sn:
imei: 860514035314136
sn : FKC4C16916001923
denduro said:
hello sir, could i also get the unlock bootloader code. RIGHT know, my phone in bootloop state. I have my bootloader lock, I can't enter fastboot. Nothing can do. here is my imei and sn:
imei: 860514035314136
sn : FKC4C16916001923
Click to expand...
Click to collapse
unlock bootloader code is not eligible for that IMEI (14 days limit...)
anyway, if you can not enter in fastboot mode, you can do anything...
go to service center or try DC Phoenix via a small fee (10-20 euros)...
i can enter fastboot, what next?
gtdaniel said:
unlock bootloader code is not eligible for that IMEI (14 days limit...)
anyway, if you can not enter in fastboot mode, you can do anything...
go to service center or try DC Phoenix via a small fee (10-20 euros)...
Click to expand...
Click to collapse
I have entered fastboot. It said phone unlocked, FRP unlock. Then, what else I have to do?
denduro said:
I have entered fastboot. It said phone unlocked, FRP unlock. Then, what else I have to do?
Click to expand...
Click to collapse
go to service center or try DC Phoenix...
for unlock code you have to login your Huawei ID atleast 14 days...
i suppose you can't do that...
anyone know how to unlock FRP LOCK on fastboot & rescue mode
menggy71 said:
anyone know how to unlock FRP LOCK on fastboot & rescue mode
Click to expand...
Click to collapse
Same Problem...cannt enter TWRP and FRP is locked...how can i unlock FRP???
Please help!
hello any news , i have the same problem Mediapad will booting but can't .
frp is locked please Help
menggy71 said:
anyone know how to unlock FRP LOCK on fastboot & rescue mode
Click to expand...
Click to collapse
why u need to unlock FRP LOCK in fastboot mode?
Hi, i want to flash recovery twrp again ..
I become this error:
fastboot flash recovery twrp.img FAILED (remote: Command not allowed)
My Tab hangs in a boot loop
The problem starts with update to emu 5 ... dload etc..
after that i lost my twrp on the tab.
This is by tab state
FB LockState: LOCKED
USER LockState: UNLOCKED
burgi110 said:
Hi, i want to flash recovery twrp again ..
I become this error:
fastboot flash recovery twrp.img FAILED (remote: Command not allowed)
My Tab hangs in a boot loop
The problem starts with update to emu 5 ... dload etc..
after that i lost my twrp on the tab.
This is by tab state
FB LockState: LOCKED
USER LockState: UNLOCKED
Click to expand...
Click to collapse
first of all u need find ROLLBACK 7 to 6 android and official stock version for your mediapad version (c...b...) download it. open zip. unzip update.app copy it in SDcard\DLOAD then turn off your mediapad and start it with 3 button power vol+ and vol- at the same time. after that unzip update.zip from official stock version copy update.app to SDCARD\Dload and do the same 3 button metod then start your mediapad and unlock FRP in settings( rollback update must be nearly 100 mb . and stock version nearly 3-3.5 GB) MAYBE IT HELPS
DenPim said:
first of all u need find ROLLBACK 7 to 6 android and official stock version for your mediapad version (c...b...) download it. open zip. unzip update.app copy it in SDcard\DLOAD then turn off your mediapad and start it with 3 button power vol+ and vol- at the same time. after that unzip update.zip from official stock version copy update.app to SDCARD\Dload and do the same 3 button metod then start your mediapad and unlock FRP in settings( rollback update must be nearly 100 mb . and stock version nearly 3-3.5 GB) MAYBE IT HELPS
Click to expand...
Click to collapse
thx , but it does not work i have format sd fat32 put in the file(UPDATE.APP) under /dload an press the buttons , but the tablet is doing nothing
i see the menue with
When i am in Fastboot is see red phone unlock and gree frp lock
Ive i try any fastboot commands to flash
fastboot flash recovery twrp.img FAILED (remote: Command not allowed)
1 to continue
2 press up key
3 your device will continue
... i see alwyas Your device is booting now ..
burgi110 said:
thx , but it does not work
OK need your version c....b..... this one can help u but it's not priceless, https://www.dc-unlocker.com/faq
Click to expand...
Click to collapse
DenPim said:
burgi110 said:
thx , but it does not work
OK need your version c....b..... this one can help u but it's not priceless, https://www.dc-unlocker.com/faq
Click to expand...
Click to collapse
I had try this but this is not working for media pad m3 15 euros for cat :crying:
My next problem is that the battery is low and tabled is not going out .so i cant load it and the battery is empty
It was overnight on 2A but battery is still empty
Click to expand...
Click to collapse
DC Phoenix Firmware write (valid for 72h/phone) this one works with my mediapad m3 i download my firmware c100b009, try to write in tech support to bring your money back
My mate 9 has become a hard brick and I want to help for recovery.
I am Japanese and I am not good at English.
I apologize for being a difficult to read sentence
I purchased MATE 9(MHA-AL00 6GB/128GB).
However, the firmware was MHA-L29C636B183 from the beginning.
I tried updating to Android 8 but I failed.
Currently, it is in the following state.
1. When turn on the power,Huawei logo is not displayed
2. The screen is black and does not react even if the power button is pressed for a long time.
3. use Vol-Up + Power , Vol-Down + Power,3 Button does not respond.
4. However, when I run fastboot devices, The following is returned.
=====
C:\>fastboot devices
N8K021xxxxxxxxxx fastboot
=====
5. fastboot reboot-bootloader respond. but there is no change in the display.
=====
C:\>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.023s]
finished. total time: 0.025s
=====
When Oreo update failed and turned on,
"ERROR 10 Boot.img" displayed on the screen where the droid doll is displayed,
and it can not start up.
I tried to recover with the following procedure No.1-4, but it got even worse.
https://forum.xda-developers.com/mate-9/how-to/guide-rebrand-chinese-al00-mate9-to-t3554656
Currently, fastboot may be usable. I installed TWRP but I can not use it.
eRecovery also does not work.
I am thinking that I can recover using FASTBOOT FLASH XXXX.IMG.
But I do not know which partition and how to update.
Please tell me about how to recover and related sites.
Thank you
have you tried turning it off and on?
;74563891 said:
My mate 9 has become a hard brick and I want to help for recovery.
I am Japanese and I am not good at English.
I apologize for being a difficult to read sentence
I purchased MATE 9(MHA-AL00 6GB/128GB).
However, the firmware was MHA-L29C636B183 from the beginning.
I tried updating to Android 8 but I failed.
Currently, it is in the following state.
1. When turn on the power,Huawei logo is not displayed
2. The screen is black and does not react even if the power button is pressed for a long time.
3. use Vol-Up + Power , Vol-Down + Power,3 Button does not respond.
4. However, when I run fastboot devices, The following is returned.
=====
C:\>fastboot devices
N8K021xxxxxxxxxx fastboot
=====
5. fastboot reboot-bootloader respond. but there is no change in the display.
=====
C:\>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.023s]
finished. total time: 0.025s
=====
When Oreo update failed and turned on,
"ERROR 10 Boot.img" displayed on the screen where the droid doll is displayed,
and it can not start up.
I tried to recover with the following procedure No.1-4, but it got even worse.
https://forum.xda-developers.com/mate-9/how-to/guide-rebrand-chinese-al00-mate9-to-t3554656
Currently, fastboot may be usable. I installed TWRP but I can not use it.
eRecovery also does not work.
I am thinking that I can recover using FASTBOOT FLASH XXXX.IMG.
But I do not know which partition and how to update.
Please tell me about how to recover and related sites.
Thank you
Click to expand...
Click to collapse
Is Erecovery working?
what command that you use to flash twrp ??
le grande magnetto said:
have you tried turning it off and on?
Click to expand...
Click to collapse
wmfreak said:
Is Erecovery working?
Click to expand...
Click to collapse
Thank you for your reply.
I turned off the power, but it looks like the power is turned on automatically.
There is no screen display, but confirmed with fastboot devices.
I can not enter eRecovery screen.
superseventh said:
what command that you use to flash twrp ??
Click to expand...
Click to collapse
fastboot flash recovery TWRP8_3.0.3.img
;74565458 said:
fastboot flash recovery TWRP8_3.0.3.img
Click to expand...
Click to collapse
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
this link will guide you how to HWOTA to update ROM when you already have Oreo update.zip, update_data_public.zip, and update_all_hw.zip put these 3 files in to update folder
if this HWOTA that you download not work try this https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-oreo-update-package-t3699522
it is HWOTA8 to update to Oreo
if twrp won't work try this https://forum.xda-developers.com/mate-9/development/preliminary-twrp-3-1-1-0-mate-9-emui-8-t3687622
superseventh said:
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
this link will guide you how to HWOTA to update ROM when you already have Oreo update.zip, update_data_public.zip, and update_all_hw.zip put these 3 files in to update folder
if this HWOTA that you download not work try this https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-oreo-update-package-t3699522
it is HWOTA8 to update to Oreo
if twrp won't work try this https://forum.xda-developers.com/mate-9/development/preliminary-twrp-3-1-1-0-mate-9-emui-8-t3687622
Click to expand...
Click to collapse
Thank you for showing me three ways. Since I am going to work from now I will try after going home.
After that, as a result of investigation, I found out that the FRP is locked.
C:\>fastboot oem lock-state info
(bootloader) FB LockState: LOCKED
(bootloader) USER LockState: UNLOCKED
OKAY [ 0.008s]
finished. total time: 0.012s
I am looking for a way to unlock this using FASTBOOT.
If I erase a partition somewhere, will it be unlockd ?
;74570405 said:
Thank you for showing me three ways. Since I am going to work from now I will try after going home.
After that, as a result of investigation, I found out that the FRP is locked.
C:\>fastboot oem lock-state info
(bootloader) FB LockState: LOCKED
(bootloader) USER LockState: UNLOCKED
OKAY [ 0.008s]
finished. total time: 0.012s
I am looking for a way to unlock this using FASTBOOT.
If I erase a partition somewhere, will it be unlockd ?
Click to expand...
Click to collapse
when you rebrand and install ROM with dload and then sign in to Google account the FRP Locked will be dissappear
this following method be the same that you use it before
now try this
1- Unlock bootloader
2- install twrp,
3-do oeminfo backup in twrp,you should have a folder name twrp, inside this folder there is many subfolders.
In last folder there is 2-3 files,those files should be replaced with Oeminfo Al00 : https://www.mediafire.com/download/37n3jqv23j6erq5
Once replaced, put this folder on ur sd card and boot to twrp recovery than restore it.
4- download C00 offline firmware from third post here https://forum.xda-developers.com/ma...o-bootloop-t3534594/post70937310#post70937310 , Download B115 then extract the rar and copy dload folder to external sd card,turn off ur phone than press 3 buttons combination,power volume up and down till the update start.
5- when finished unlock bootloader again
6-install twrp again
7- flash hw_data for C00 in twrp http://update.hicloud.com:8180/TDS/.../v65567/f2/full/all/cn/update_full_all_cn.zip it will give an error, don't worry.
8-flash c00 offline firmware again to have locked bootloader and get rid of the warning message lol
9 factory rest from settings.
10-use system update to get the latest firmware, sometimes you need sim card inserted,and using the download latest package option.
11 done.
Currently, only FASTBOOT can be used,
FRP is preventing the overwriting of the partition,
so I can not try the suggested method.
I studied variously, but I can not find a good solution.
I am planning to use DC-Phoenix (paid service) in a few days.
It seems to be able to update ROM from FASTBOOT even when FRP is locked.
I tried DC-Phoenix, but as a result it failed. The FAST BOOT which I was able to use until now can not be used and the power can not be turned on.
I am disappointed that the method of recovery is gone.
Thank you for your support.
Bricked
GreenOcean said:
I tried DC-Phoenix, but as a result it failed. The FAST BOOT which I was able to use until now can not be used and the power can not be turned on.
I am disappointed that the method of recovery is gone.
Thank you for your support.
Click to expand...
Click to collapse
Well, with fastboot, adb, bootloader mode, and eRecovery gone there is not really a lot you can do short of returning the device to Huawei (hopefully you still have warranty) for a replacement. Just tell them your phone died.