Related
I need help guys because i lost my twrp recovery while flashing the xenon rom. The problem is now my phone is also not detected in adb devices in my laptop. I am running windows 10 i had installed twrp from this laptop. When ever i connect and give command ADB DEVICES the it doesn't show any devices found. I had installed all the drivers. My phone is running in the xenonhd rom. Pls help me how i can install twrp and how to correct adb.
Sent from my Lenovo A6000 using XDA-Developers mobile app
Lenevo A6000 Unbrick/Fix For Any Problem
It's common since, when modified, the A6000 doesn't have a way to directly boot into recovery without a System or ADB command (Power Hold > Reboot > Recovery and "adb reboot recovery" respectively). However you can always boot into Download mode which acts as an emergency subsystem at any time. Have a quick guide on how to do that and you'll be flashing away custom ROMs again in no time.
(Optional but recommended steps will be market with an asterisk (*))
Disclaimer: You are doing everything out of your own free will and volition. I am in no way responsible to any potential damage you might cause to your device. This can occur in cases of not following the guide properly.
Below is the fix for problems when the phone has no OS to reboot from. In case of Xenon which is rooted, follow this:
Easy Guide
(This is for when a phone already has an OS to boot from)
1. Open Terminal Emulator
2. Write
Code:
su
reboot recovery
(On any Superuser permissions pop-ups press Grant.)
3. Follow Steps 4 and 5 from the guide bellow.
Downloads
If you are on Kitkat (4.4.X), Download This (Mirror)
If you are on Lolipop (5.X.X), Download This (Mirror)
If you are not sure, download both and try both, no damage should be done.
[Source]
Instructions
1. Download all the prerequisite files.
2. Power Off Your Phone by removing the battery.* (See Note 1)
3. Hold the Volume Down and Power keys until the phone vibrates once and the Lenovo screen appears. At the bottom it should say "Powered by Android" and under it some small Chinese letters and "Power key long press can reboot phone". (See Note 2)
4. Extract the downloaded ZIP files anywhere you want. You should end up with a "TWRP" folder.
5. Open that TWRP folder and run "Boot-TWRP_A6000.bat"
6. If everything went well, you should be in TWRP recovery. Flash your desired ROM following the instructions from their thread, and everything should now be fine. (See Note 3)
Notes
1. I have noticed that sometimes my phone will not recognize that it's in Bootloader mode and will try to boot normally after a few seconds along with the fastboot not recognizing it. Theory: it doesn't shut down completely when rebooted via Holding the Power button, and tries to boot like nothing is wrong. I don't have a concrete fix, the best i can offer is to try different button combinations. (Vol. Down+Power / Vol. Up+Power / Vol. Up+Vol. Down+Power)
2. If you get the problem described in Note 1 do steps 4 and 5 before step 3. The .bat script will wait for the phone, as soon as it detects the Bootloader it will do it's job.
3. If something went wrong, leave a reply, I'll see if i can guide you through it. Remember to follow instructions carefully!
i had a simple sol....
Just boot into bootloader by Press n hold vol - an power ... den do wht u r doing .. Connect cable .. to pc.. n do the command in cmd.. That it
I have simple method
1. First root with kingoroot it is on click root method.
2.then install rashr
3.then flast twrp recovery img
4.then reboot to recovery.
---------- Post added at 03:56 PM ---------- Previous post was at 03:50 PM ----------
It is link for kingoroot
https://root-apk.kingoapp.com/kingoroot-download.htm
Download rashr via play store
I was totally in awe when my phone won't reboot to to recovery and download mode even tho i can reboot system normally and after I flash some recoveries all of them bootlooped my phone but that fix by AXAzor completely worked. Very huge thanks to @AXAz0r
blaspheme000 said:
I was totally in awe when my phone won't reboot to to recovery and download mode even tho i can reboot system normally and after I flash some recoveries all of them bootlooped my phone but that fix by AXAzor completely worked. Very huge thanks to @AXAz0r
Click to expand...
Click to collapse
Glad to hear that, cheers
flash twrp using flashify,rashr
I'm stuck in an infinite eRecovery loop. No matter what I try or what I do I can't get the phone to boot back into the OS. Anyone have any tips or tricks? Huawei is going to do an rma for me but I'm flying out on business for 2 weeks and really need this phone with me. It's an MLA-L03 that is oem unlocked (which is what I'm thinking is causing me the most issues as I can't do the normal button presses to get to certain things but I can't relock it as it says it can't be trusted or whatever)
I did manage to get to a point where I have full access to /data/ but no matter what rom I try to flash it fails with failing to mount /cust/
If I put an update.app it will get to 5% and hang until it fails when I do the button press to force an update. I cannot get to the emui factory reset screen.
PS, yes I know I'm a dumbass, so be gentle lol. I'm really desperate and have nothing to lose at this point so will to try anything.
I did try everything here with no luck (other than getting full access to /data/ lol):
https://forum.xda-developers.com/nova-plus/help/help-nova-plus-mla-l03-bricked-t3573234
Im not a pro either but,have you try to recover phone via HiSuite ?
in hisuite,main screen,bottom right tab...
I did try that but it says my phone is not compatible (or something to that effect).
rednekcowboy said:
I did try that but it says my phone is not compatible (or something to that effect).
Click to expand...
Click to collapse
sadly,i cant help more...i did not installed that erecovery thing/unlocked or rooted my device so.....
hope someone will join to help you
the erecovery thing is a huwaei emui feature, not something I installed but thanks anyways for the suggestion.
rednekcowboy said:
the erecovery thing is a huwaei emui feature, not something I installed but thanks anyways for the suggestion.
Click to expand...
Click to collapse
my bad hehehe...i wanted to say the twrp :silly:
Ok so you'll have to flash firmware with fastboot.
You need to download and install fastboot, firmware finder and huawei extract tool.
https://forum.xda-developers.com/showthread.php?t=2588979 (fastboot), https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146 (firmware finder), https://forum.xda-developers.com/showthread.php?t=2433454 (huawei extract tool).
So install adb and fastboot, extract firmware finder and huawei extract tool. Open firmware finder hit common base, on model for find enter mla-l03 and download a full ota, form firmware you just downloaded extract update.app. Now open huawei extract tool and load your update.app you've just extracted and extract from there boot.img, recovery.img and system.img by using the right click (extract them on the same folder where is located fastboot, for example I got fastboot installed on local C/adb).
If you have twrp installed boot in fastboot mode by using twrp, if not you can boot in fastboot mode with the phone turned off by pressing volume - while plugging the usb cable.
Open cmd and write cd /adb (between cd and / is space) and hit enter than write fastboot flash boot BOOT.IMG and hit enter, fastboot flash recovery RECOVERY.IMG and hit enter, fastboot flash system SYSTEM.IMG and hit enter, after finally writing the system write fastboot reboot and hit enter and wait till phone reboots.
Thanks, I've done all that already and it did not fix it but will try again once I get home.
mArIuS% said:
Ok so you'll have to flash firmware with fastboot.
You need to download and install fastboot, firmware finder and huawei extract tool.
https://forum.xda-developers.com/showthread.php?t=2588979 (fastboot), https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146 (firmware finder), https://forum.xda-developers.com/showthread.php?t=2433454 (huawei extract tool).
So install adb and fastboot, extract firmware finder and huawei extract tool. Open firmware finder hit common base, on model for find enter mla-l03 and download a full ota, form firmware you just downloaded extract update.app. Now open huawei extract tool and load your update.app you've just extracted and extract from there boot.img, recovery.img and system.img by using the right click (extract them on the same folder where is located fastboot, for example I got fastboot installed on local C/adb).
If you have twrp installed boot in fastboot mode by using twrp, if not you can boot in fastboot mode with the phone turned off by pressing volume - while plugging the usb cable.
Open cmd and write cd /adb (between cd and / is space) and hit enter than write fastboot flash boot BOOT.IMG and hit enter, fastboot flash recovery RECOVERY.IMG and hit enter, fastboot flash system SYSTEM.IMG and hit enter, after finally writing the system write fastboot reboot and hit enter and wait till phone reboots.
Click to expand...
Click to collapse
Really?
I got my phone in the same state and was the only method witch helped me.
Did you successfully flashed boot, recovery and system and still not working? phone get stuck on the huawei logo? After you flash them, boot into recovery and do a factory reset and wipe cache.
yup, everything flashed successfully. I can't get into the recovery to do a factory reset. I have 4 options at my disposal:
1. fastboot
2. Huawei eRecovery
3. TWRP
4. force update where it always fails at 5%
I think the biggest thing that is screwing me is the fact that it's unlocked and I can't relock it. I'm almost 100% positive if I could relock it, I would have no issues with it.
And woh do you boot into twrp? Since you can boot into twrp you must be able to boot in stock recovery. Use huawei multi tool by black team too go into recovery.
---------- Post added at 07:04 PM ---------- Previous post was at 07:01 PM ----------
rednekcowboy said:
yup, everything flashed successfully. I can't get into the recovery to do a factory reset. I have 4 options at my disposal:
1. fastboot
2. Huawei eRecovery
3. TWRP
4. force update where it always fails at 5%
I think the biggest thing that is screwing me is the fact that it's unlocked and I can't relock it. I'm almost 100% positive if I could relock it, I would have no issues with it.
Click to expand...
Click to collapse
I got the bootloader unlocked too, and it's working via fastboot....
Huawei multi tool have the option to relock the bootloader.
mArIuS% said:
And woh do you boot into twrp? Since you can boot into twrp you must be able to boot in stock recovery. Use huawei multi tool by black team too go into recovery.
---------- Post added at 07:04 PM ---------- Previous post was at 07:01 PM ----------
I got the bootloader unlocked too, and it's working via fastboot....
Huawei multi tool have the option to relock the bootloader.
Click to expand...
Click to collapse
Thanks I'll try that.
It's weird. I flash TWRP, do what I need to do, then reflash the recovery.img. However it just does a continuous loop to eRecovery when I do that unless I try to force it to update.
I'll try using the fastboot that you linked to and see if that makes a difference. Right now I'm using the minimal adb and fastboot install.
EDIT: Same result when trying to relock the bootloader--device cannot be trusted.
EDIT2: Do you have the cust.img file? None of the firmwares I've downloaded has it in it.
rednekcowboy said:
Thanks I'll try that.
It's weird. I flash TWRP, do what I need to do, then reflash the recovery.img. However it just does a continuous loop to eRecovery when I do that unless I try to force it to update.
I'll try using the fastboot that you linked to and see if that makes a difference. Right now I'm using the minimal adb and fastboot install.
EDIT: Same result when trying to relock the bootloader--device cannot be trusted.
EDIT2: Do you have the cust.img file? None of the firmwares I've downloaded has it in it.
Click to expand...
Click to collapse
I have a cust.img but is for can-l01...and won't help you.
Sorry i'm out ideas.
mArIuS% said:
I have a cust.img but is for can-l01...and won't help you.
Sorry i'm out ideas.
Click to expand...
Click to collapse
When your device reboots and you get to the warning screen about your device being unlocked, what buttons do you press to get into the normal (ie not eRecovery) recovery where you can do a factory reset? When I have TWRP installed, I have to hold volume + and volume - at the same time to go into TWRP. If I do the same thing after I reflash recovery.img, then it goes straight into the forced update which stalls and fails at 5%. Volume - reboots and goes back to fastboot. Volume + takes me to eRecovery. Doing nothing, the phone reboots and goes to eRocovery on the reboot. Holding down all 3 buttons also goes to the forced update screen.
I'm assuming that I'm missing something super simple and stupid so I'm going to go over everything again, step by step very carefully.
rednekcowboy said:
When your device reboots and you get to the warning screen about your device being unlocked, what buttons do you press to get into the normal (ie not eRecovery) recovery where you can do a factory reset? When I have TWRP installed, I have to hold volume + and volume - at the same time to go into TWRP. If I do the same thing after I reflash recovery.img, then it goes straight into the forced update which stalls and fails at 5%. Volume - reboots and goes back to fastboot. Volume + takes me to eRecovery. Doing nothing, the phone reboots and goes to eRocovery on the reboot.
I'm assuming that I'm missing something super simple and stupid so I'm going to go over everything again, step by step very carefully.
Click to expand...
Click to collapse
To enter in normal recovery you have to press and hold at the same time volume - and power button.
mArIuS% said:
To enter in normal recovery you have to press and hold at the same time volume - and power button.
Click to expand...
Click to collapse
That just reboots me and then puts me in fastboot unfortunately. I'm going to try loading twrp and removing anything in /dload/ and see if it will boot to normal recovery. Last time I checked there was an update.app file there so maybe it's just bypassing recovery and trying to install that.
rednekcowboy said:
That just reboots me and then puts me in fastboot unfortunately. I'm going to try loading twrp and removing anything in /dload/ and see if it will boot to normal recovery. Last time I checked there was an update.app file there so maybe it's just bypassing recovery and trying to install that.
Click to expand...
Click to collapse
Sorry it is volume up + and power button
And that brings me to eRecovery
mArIuS% said:
Sorry it is volume up + and power button
Click to expand...
Click to collapse
I'm driving and it's a bit hard to write did you tried another recovery? You can flsh twrp, put the stock recovery on sdcard, boot into twrp and flash recovery from there and reboot phone from twrp into recovery....
No worries, I really appreciate all the help. Now stop texting and driving. Your life is more important than my phone!!
Hi,
I have a problem. I tried to flash stock rom, but I forgot about hifi image.
There's a photo of my phone.
imgur.com/aVUBTRD
I have unlocked bootloader, but I can't flash hifi. "Command not allowed."
I tried method with put microsd card with update.app in dload into smartphone and I when I pressed power button
and VOLUME UP and VOLUME DOWN nothing happened.
I tried just flash all partitions separately, with huawei update extractor, again nothing.
I saw the same problem in this site, but I don't know how he solwed this.
Please help me :crying:
Flash a Huawei recovery, a old one b584 or something, then download b596 DS or b597 SS i don't know your device, extract update.app and copy to sd card dload folder, try to flash it!
persona78 said:
Flash a Huawei recovery, a old one b584 or something, then download b596 DS or b597 SS i don't know your device, extract update.app and copy to sd card dload folder, try to flash it!
Click to expand...
Click to collapse
I flashed recovery and nothing happened, I can't get into recovery mode, only fastboot.
I have the same phone.
adamektv said:
I flashed recovery and nothing happened, I can't get into recovery mode, only fastboot.
I have the same phone.
Click to expand...
Click to collapse
You flashed the recovery and everything say okay, right?
Now flash a rom with dload and the 3 keys, do you know how?
.
persona78 said:
You flashed the recovery and everything say okay, right?
Now flash a rom with dload and the 3 keys, do you know how?
.
Click to expand...
Click to collapse
I don't know, when I pressed three buttons I didn't enter to recovery mode, but to rescue mode, as if recovery wasn't flashed.
adamektv said:
I don't know, when I pressed three buttons I didn't enter to recovery mode, but to rescue mode, as if recovery wasn't flashed.
Click to expand...
Click to collapse
Do you have a dload folder with update.app inside, in sd card?
With that and pressing vol +, vol - and power at same time you enter in flash mode and start to flash the rom
persona78 said:
Do you have a dload folder with update.app inside, in sd card?
With that and pressing vol +, vol - and power at same time you enter in flash mode and start to flash the rom
Click to expand...
Click to collapse
Yes, I have, and it's still not working
I can't charge battery, so i don't think it's software.
Maybe it's motherboard
adamektv said:
Yes, I have, and it's still not working
I can't charge battery, so i don't think it's software.
Maybe it's motherboard
Click to expand...
Click to collapse
How da start it???
adamektv said:
Yes, I have, and it's still not working
I can't charge battery, so i don't think it's software.
Maybe it's motherboard
Click to expand...
Click to collapse
Try opening the phone and disconnecting the battery .. do it if u only gave up with other methods someone said it worked
adamektv said:
Hi,
I have a problem. I tried to flash stock rom, but I forgot about hifi image.
There's a photo of my phone.
imgur.com/aVUBTRD
I have unlocked bootloader, but I can't flash hifi. "Command not allowed."
I tried method with put microsd card with update.app in dload into smartphone and I when I pressed power button
and VOLUME UP and VOLUME DOWN nothing happened.
I tried just flash all partitions separately, with huawei update extractor, again nothing.
I saw the same problem in this site, but I don't know how he solwed this.
Please help me :crying:
Click to expand...
Click to collapse
Hi Have got succeeded or not, if not follow the guide.
Is your phone being detected by PC if yes then you have chances of recovering your phone.
1. Download 15 Seconds ADB and Fastboot Drivers. Visit the official XDA forum for download and installation instructions.
2. Install Huawei HiSuite which will install drivers .
3. If HiSuite doesn't install Install drivers then install universal drivers for your device .
Now connect your device to pc and open HiSuite and click on system recovery it will show options for recovery if it is success then you are fine if not then proceed to this method.
Connect your phone to PC.
Open Command Prompt in the directory where you have extracted the ADB files by holding Shift and Right Mouse Button and finally click Open Command Prompt window here in the context menu.
Completely power off your device.
While holding Volume Down button, connect your device to PC via USB cable to boot to Fastboot Mode.
1. Type the following command in ADB :
Code:
adb devices
If your device is being detected and it shows list of devices attached and its serial number.
2.Now download the firmware of the phone before your phone got bootlooped extract the update using the file here
3.Now copy the following files ( boot.img, recovery.img and system.img ,cust.img ) from the extracted files to the ADB files directory.
4.Now Execute these commands one at a time using the command prompt.
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cust cust.img
fastboot reboot
5.Now Perform a Factory Reset if your phone got recovered.
If not then download the stock recovery of your Device and try steps 2,3,4.
Even if it doesn't get succeeded then try this option .
If your device got bootlooped while on Lollipop or Marshmallow then you have one more way to recover .
6.Now download the latest TWRP from here and boot into TWRP recovery if you cant enter TWRP recovery for this version then try the previous TWRP versions like 2.8.7 ,
7.Use the following command to flash the TWRP recovery
Code:
fastboot flash recovery twrp.img
8.Then download any of the custom ROMs or ask any of the XDA members for TWRP backup for your device and flash them through Recovery.
Then Reboot your Device.
You would most probably recover your device from any of the above methods . I too had the same problem and My device was use less for almost 6 months but after several trial and error methods my device got recovered.
Credits:
1.https://forum.xda-developers.com/honor-4c/how-to/huawei-honor-4c-index-troubleshooting-t3293110
2.https://forum.xda-developers.com/showthread.php?t=2433454
miststudent2011 said:
Hi Have got succeeded or not, if not follow the guide.
Is your phone being detected by PC if yes then you have chances of recovering your phone.
1. Download 15 Seconds ADB and Fastboot Drivers. Visit the official XDA forum for download and installation instructions.
2. Install Huawei HiSuite which will install drivers .
3. If HiSuite doesn't install Install drivers then install universal drivers for your device .
Now connect your device to pc and open HiSuite and click on system recovery it will show options for recovery if it is success then you are fine if not then proceed to this method.
Connect your phone to PC.
Open Command Prompt in the directory where you have extracted the ADB files by holding Shift and Right Mouse Button and finally click Open Command Prompt window here in the context menu.
Completely power off your device.
While holding Volume Down button, connect your device to PC via USB cable to boot to Fastboot Mode.
1. Type the following command in ADB :
Code:
adb devices
If your device is being detected and it shows list of devices attached and its serial number.
2.Now download the firmware of the phone before your phone got bootlooped extract the update using the file here
3.Now copy the following files ( boot.img, recovery.img and system.img ,cust.img ) from the extracted files to the ADB files directory.
4.Now Execute these commands one at a time using the command prompt.
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cust cust.img
fastboot reboot
5.Now Perform a Factory Reset if your phone got recovered.
If not then download the stock recovery of your Device and try steps 2,3,4.
Even if it doesn't get succeeded then try this option .
If your device got bootlooped while on Lollipop or Marshmallow then you have one more way to recover .
6.Now download the latest TWRP from here and boot into TWRP recovery if you cant enter TWRP recovery for this version then try the previous TWRP versions like 2.8.7 ,
7.Use the following command to flash the TWRP recovery
Code:
fastboot flash recovery twrp.img
8.Then download any of the custom ROMs or ask any of the XDA members for TWRP backup for your device and flash them through Recovery.
Then Reboot your Device.
You would most probably recover your device from any of the above methods . I too had the same problem and My device was use less for almost 6 months but after several trial and error methods my device got recovered.
Credits:
1.https://forum.xda-developers.com/honor-4c/how-to/huawei-honor-4c-index-troubleshooting-t3293110
2.https://forum.xda-developers.com/showthread.php?t=2433454
Click to expand...
Click to collapse
I have already done this and still stuck in rescue
adamektv said:
I have already done this and still stuck in rescue
Click to expand...
Click to collapse
Did you try flashing different variant ROM ie different builds?
Actually I too got the same problem bootlooped on LP but cant flash the LP ROM back so I flashed different Region ROM.
Give a try to TWRP Method It should give you success.
Imp:
Try the previous ROM where you got Bootloop, or the version earlier to it.If it doesn't succeed try the rom which you got initially on your mobile.
PS: If your phone is being detected by your PC you have good chances of recovering your phone.
Hey long story short I flashed the wrong UPDATE.app... twice (although the second time it error'ed as incompatible) and factory-reset my Huawei P9 Lite VNS-L22C636B101 so OEM probably most likely got locked again during this reset. however, I can:
1) Enter fastboot mode
2) Nothing else, it just gets stuck on the boot logo. (incl not able to get the boot unlocker code because I didn't record any important stuff like product Id before ruining my device)
any recovery methods? open to roots, custom rom etc.
step by step instructions will be appreciated too
Ok if you saved your Bootloader Unlock Code you can recover your phone this way..
You'll need:
A-OEMInfo: https:// mega.nz/ #!pgEDVJAB!1B_ipBD_toi4BPFPAn01iEnA1Da4aVC5Ru87Z45FbYU
B-Firmware: http:// update.hicloud. com:8180/TDS/data/files/p3/s15/G1164/g104/v64241/f1/full/update.zip
C-UnlockCode, you must have it from the last time you unlocked
D-Recovery
Steps:
1. Boot into fastboot (connect your phone to your PC over USB and reset your phone pressing Vol- and Power, when you feel the vibration release power button and keep Vol- pressed .. Try it as many times as you can, until you get into fastboot.
2-Once on fastboot unlock your Bootloader with command:
fastboot OEM unlock (UNLOCK CODE)
3-Once unlocked reboot to fastboot again and flash recovery (TWRP or Revolution, try as many as you can until you are able to boot into recovery repeating steps 3-4) with this command:
fastboot flash recovery recoveryfilename.img
4- Reboot your phone pressing Vol+ and Power button.. It should go directly to *Booting Phone* and boot into recovery.
5-Once on recovery connect the phone to your PC and upload the OEMInfo file to SDCard without decompressing it.
6-Uncompress the firmware file on your PC and copy UPDATE.APP to 'dload' folder on SDCard.
7-Install OEMInfo.zip file with Recovery.
8-Shutdown your phone with recovery options.
9-Turn your phone on with Volume Up and Volume down pressed while pressing Power button.. When you feel the vibration release power button and keep the other buttons pressed.. It should start to flash the firmware from your dload folder on SDCard.
10-once installed it'll restart your Phone.. If it asks you for an encryption password insert anything a couple times until it reboots the phone and factory resets the phone.
11-it should start to boot.. Give it about 20mins and you should be able to boot your phone
I hope this helps you man I saved my phone with this method more than a couple of times.. it's always important to have your Bootloader Unlock code in hand
thanks but..
her3814 said:
Ok if you saved your Bootloader Unlock Code you can recover your phone this way..
You'll need:
A-OEMInfo: https:// mega.nz/ #!pgEDVJAB!1B_ipBD_toi4BPFPAn01iEnA1Da4aVC5Ru87Z45FbYU
B-Firmware: http:// update.hicloud. com:8180/TDS/data/files/p3/s15/G1164/g104/v64241/f1/full/update.zip
C-UnlockCode, you must have it from the last time you unlocked
D-Recovery
Steps:
1. Boot into fastboot (connect your phone to your PC over USB and reset your phone pressing Vol- and Power, when you feel the vibration release power button and keep Vol- pressed .. Try it as many times as you can, until you get into fastboot.
2-Once on fastboot unlock your Bootloader with command:
fastboot OEM unlock (UNLOCK CODE)
3-Once unlocked reboot to fastboot again and flash recovery (TWRP or Revolution, try as many as you can until you are able to boot into recovery repeating steps 3-4) with this command:
fastboot flash recovery recoveryfilename.img
4- Reboot your phone pressing Vol+ and Power button.. It should go directly to *Booting Phone* and boot into recovery.
5-Once on recovery connect the phone to your PC and upload the OEMInfo file to SDCard without decompressing it.
6-Uncompress the firmware file on your PC and copy UPDATE.APP to 'dload' folder on SDCard.
7-Install OEMInfo.zip file with Recovery.
8-Shutdown your phone with recovery options.
9-Turn your phone on with Volume Up and Volume down pressed while pressing Power button.. When you feel the vibration release power button and keep the other buttons pressed.. It should start to flash the firmware from your dload folder on SDCard.
10-once installed it'll restart your Phone.. If it asks you for an encryption password insert anything a couple times until it reboots the phone and factory resets the phone.
11-it should start to boot.. Give it about 20mins and you should be able to boot your phone
I hope this helps you man I saved my phone with this method more than a couple of times.. it's always important to have your Bootloader Unlock code in hand
Click to expand...
Click to collapse
thanks but I unlocked oem from developer options last time so I don't have a code and I don't have a product id etc to request one. I guess there's no way to fix my phone without it
also
also I'm a complete noob what is twrp on step 3?
her3814 said:
Ok if you saved your Bootloader Unlock Code you can recover your phone this way..
You'll need:
A-OEMInfo: https:// mega.nz/ #!pgEDVJAB!1B_ipBD_toi4BPFPAn01iEnA1Da4aVC5Ru87Z45FbYU
B-Firmware: http:// update.hicloud. com:8180/TDS/data/files/p3/s15/G1164/g104/v64241/f1/full/update.zip
C-UnlockCode, you must have it from the last time you unlocked
D-Recovery
Steps:
1. Boot into fastboot (connect your phone to your PC over USB and reset your phone pressing Vol- and Power, when you feel the vibration release power button and keep Vol- pressed .. Try it as many times as you can, until you get into fastboot.
2-Once on fastboot unlock your Bootloader with command:
fastboot OEM unlock (UNLOCK CODE)
3-Once unlocked reboot to fastboot again and flash recovery (TWRP or Revolution, try as many as you can until you are able to boot into recovery repeating steps 3-4) with this command:
fastboot flash recovery recoveryfilename.img
4- Reboot your phone pressing Vol+ and Power button.. It should go directly to *Booting Phone* and boot into recovery.
5-Once on recovery connect the phone to your PC and upload the OEMInfo file to SDCard without decompressing it.
6-Uncompress the firmware file on your PC and copy UPDATE.APP to 'dload' folder on SDCard.
7-Install OEMInfo.zip file with Recovery.
8-Shutdown your phone with recovery options.
9-Turn your phone on with Volume Up and Volume down pressed while pressing Power button.. When you feel the vibration release power button and keep the other buttons pressed.. It should start to flash the firmware from your dload folder on SDCard.
10-once installed it'll restart your Phone.. If it asks you for an encryption password insert anything a couple times until it reboots the phone and factory resets the phone.
11-it should start to boot.. Give it about 20mins and you should be able to boot your phone
I hope this helps you man I saved my phone with this method more than a couple of times.. it's always important to have your Bootloader Unlock code in hand
Click to expand...
Click to collapse
TWRP is a custom recovery which you can flash it via Fastboot
And you can also fix your phone by flashing the system.img, data.img and boot.img using ADB
Search on Google
Hi,
I flashed xenonHD ROM by HassanMirza week ago.
Today i heard the android 8 comes to huawei p10 lite.
I'd like to back to stock rom
I tried dload method, fastboot mode (flashes, but not booting)
I don't know how to do it
pls help
https://forum.xda-developers.com/p10-lite/development/compilation-firmware-flash-emui-8-0-0-t3777658
Jaizu said:
https://forum.xda-developers.com/p10-lite/development/compilation-firmware-flash-emui-8-0-0-t3777658
Click to expand...
Click to collapse
Thanks a lot
HYPER98889 said:
Hi,
I flashed xenonHD ROM by HassanMirza week ago.
Today i heard the android 8 comes to huawei p10 lite.
I'd like to back to stock rom
I tried dload method, fastboot mode (flashes, but not booting)
I don't know how to do it
pls help
Click to expand...
Click to collapse
after few tries it's not working
twrp flashes it but i cant boot to system (bootanimation is mising, after few seconds it restarts the phone and showing erecovery)
HYPER98889 said:
Hi,
I flashed xenonHD ROM by HassanMirza week ago.
Today i heard the android 8 comes to huawei p10 lite.
I'd like to back to stock rom
I tried dload method, fastboot mode (flashes, but not booting)
I don't know how to do it
pls help
Click to expand...
Click to collapse
- Download with Huawei Firmware Finder right files your phone (common base -> filelist, copy link internet browser (download all). You can put your own model in setting)
(example europe version WAS-LX1C432 , i think 2 sim hw L21 and 1 sim hw L01, before this i was WAS-LX1C432B206 )
http://pro-teammt.ru/projects/hwff/GetLatestVersion.action
- Extract files with HuaweiUpdateExtractor
http://forum.xda-developers.com/attachment.php?attachmentid=3262545
Need extract for multi-tool 8: BOOT.img, CUST.img, RECOVERY.img, RECOVERY2.img, SYSTEM.img, UPDATE.APP).
(because i not really remeber , try all other files from update.app from *hw*.zip and update.app from update.zip
Please fix is not right, is is possible both are same)
- Multi-Tool 8 -> unbrick
http://pro-teammt.ru/projects/hwmt/release/Multi-Tool 8.msi
Turn phone off from TWRP (reboot, shutdown)
press vol - and put usb cable in pc (need go download mode, repeat if need, if pc not reconize put phone normat booting with usb and go coffee)
try twice if need with swipe cache.
Maybe it end error message but running right.
- If all seems be fine, relock bootloader
Turn off phone
press vol - and put usb cable in pc (need go download mode, repeat if need)
(Run in bat file or type in command window , your own bootloader opening code from huawei.)
fastboot oem relock "your opening code"
Good luck, i repair no system files with this.
I was first timer, so try understand poor instructions.
HWOTA, Sideload, Dload not working with me.
Mikelsson70 said:
- Download with Huawei Firmware Finder right files your phone (common base -> filelist, copy link internet browser (download all). You can put your own model in setting)
(example europe version WAS-LX1C432 , i think 2 sim hw L21 and 1 sim hw L01, before this i was WAS-LX1C432B206 )
http://pro-teammt.ru/projects/hwff/GetLatestVersion.action
- Extract files with HuaweiUpdateExtractor
http://forum.xda-developers.com/attachment.php?attachmentid=3262545
Need extract for multi-tool 8: BOOT.img, CUST.img, RECOVERY.img, RECOVERY2.img, SYSTEM.img, UPDATE.APP).
(because i not really remeber , try all other files from update.app from *hw*.zip and update.app from update.zip
Please fix is not right, is is possible both are same)
- Multi-Tool 8 -> unbrick
http://pro-teammt.ru/projects/hwmt/release/Multi-Tool 8.msi
Turn phone off from TWRP (reboot, shutdown)
press vol - and put usb cable in pc (need go download mode, repeat if need, if pc not reconize put phone normat booting with usb and go coffee)
try twice if need with swipe cache.
Maybe it end error message but running right.
- If all seems be fine, relock bootloader
Turn off phone
press vol - and put usb cable in pc (need go download mode, repeat if need)
(Run in bat file or type in command window , your own bootloader opening code from huawei.)
fastboot oem relock "your opening code"
Good luck, i repair no system files with this.
I was first timer, so try understand poor instructions.
HWOTA, Sideload, Dload not working with me.
Click to expand...
Click to collapse
I cant find the userdata.img and the ramdisk_recovery
You you have the stock e-recovery (nougat)?
If yes try to "update" to the firmware service repair (emui 5): http://androidhost.ru/JS
Or try to update to stock oreo (you can see my EMUI 8 post)