Hi, I have been reading threads on how to unlock my mediapad 3 (BTV-W09). I wanted to know if anyone with the same model who succefully got his code could tell me how to put the information. I have tryed "BTV-W09", "HUAWEI BTV-W09", etc. with no luck, i always get the msg "Please make sure the information you entered is correct." I have tested firefox, edge, chrome, dolphin, etc.
Greetings
jmsegarra said:
Hi, I have been reading threads on how to unlock my mediapad 3 (BTV-W09). I wanted to know if anyone with the same model who succefully got his code could tell me how to put the information. I have tryed "BTV-W09", "HUAWEI BTV-W09", etc. with no luck, i always get the msg "Please make sure the information you entered is correct." I have tested firefox, edge, chrome, dolphin, etc.
Greetings
Click to expand...
Click to collapse
I've run into the same issue. I don't think it's the correct message. It should say something like "Please notice, we don't provide unlock codes for your device."
I wrote Huawei support and this is the message I got back.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It would be awesome if anyone has a way to work around this issue... thanks!
Same result here
I got the same problem on the unlock web page, and the same email result from Huawei USA.
I finally resorted to paying the $4.49 to DC-Unlocker and successfully unlocked (rooted, installed TWRP, etc.). I *have* read here and there that Huawei requires that you create an account on their site and log into it for some period (I want to say 14 days). I didn't have the patience to try that route, since I wanted to get the device set up and not worry about having to wipe it again in two weeks' time.
[Edit] I did open the special configuration menu (with calculator in landscape mode and a special code I can't remember just now: someting like "()()824579()()="). There, I found a model number "BTV_W09_V2" (note the underscores). Once or twice in my dozens of code-retrieval attempts, this model number gave me a response on the website telling me that my unlock code is "{}". It felt like progress, but was still useless.
Were you guys on EMUI 4 or 5?
I had to downgrade mine to EMUI 4, get the unlock code, unlock it for the first time, adb flash TWRP then upgrade back to EMUI 5, use back the same unlock code to unlock the bootloader again. Once updated to EMUI 5, remember to adb flash TWRP for EMUI 5.
I finally got my unlock code, i wrote an email last week asking for the code on the contact form (http://consumer.huawei.com/en/contact-us/?tag=email). After two or three emails moving me from one department to another, the gave me the code.
Thanks. I used dcunlocker on two BTV-W09C128B005 tablets and it worked (8 credits). You have to use the calculator and sub *# with (). Received the same email that says you will brick the device and they don't supply codes, bunch of lies. I also got xposed (think v23) in fine after greatsalon's w09 version of twrp and latest su. Removed the updater and all the other garbage services they use to spy, staying on stock marshmallow for now. Apps used to fly drones like litchi don't work well on nougat but are stable on marshmallow.
piloki said:
Thanks. I used dcunlocker on two BTV-W09C128B005 tablets and it worked (8 credits). You have to use the calculator and sub *# with (). Received the same email that says you will brick the device and they don't supply codes, bunch of lies. I also got xposed (think v23) in fine after greatsalon's w09 version of twrp and latest su. Removed the updater and all the other garbage services they use to spy, staying on stock marshmallow for now. Apps used to fly drones like litchi don't work well on nougat but are stable on marshmallow.
Click to expand...
Click to collapse
Anyone get it to work from the website? Keep getting the error of make sure you have all correct info entered
Sent from my BTV-W09 using Tapatalk
elcidroyale said:
Anyone get it to work from the website? Keep getting the error of make sure you have all correct info entered
Sent from my BTV-W09 using Tapatalk
Click to expand...
Click to collapse
UPDATE: unlocked via DC. Very easy and cost me $4.
Sent from my BTV-W09 using Tapatalk
Related
Made this one in the wrong place, cant seem to find the delete buton
Any one know how to unlock huawei e220?
So im not bound to one operator.
Didnt get mutch from google
EDIT:
This site can unlock newer Huawei modems. http://www.unlockhuawei.info/
You have to enter the IMEI from the modem, cost just 10 euro.
I want that to, dont want to use the crappy telia connection that my job gives me and my E220 is lockt.
Wow! you really can find alot on xda-developers.com. I have been looking for this for a long time.
Anyone found a way yet?
For those who want to remote unlock their huawei e220, now it's possible thru www.kulankendi.com
hi
on this link you can find informations:
http://www.avforums.com/forums/showthread.php?t=696311
Edit : removed due to legislation issues
Cya,
Viper BJK
the unlock, work perfect, many thanks
Huawei e220 3g modem unlock guide!!!!
IVE MADE THIS GUIDE ON HOW TO UNLOCK THE E220 MODEM WHICH IS USUALLY LOCKED TO A PARTICULAR NETWORK AND IT CONTAINS ALL THE TOOLS AND PROGRAMS REQUIRED( except qmat which you have to get from revskills.de so as not to violate any copyright laws). I GOT IT AFTER GOING THROUGH MANY GUIDES ON GOOGLE AND MADE A REALLY SIMPLE ONE FOR ANYONE TO FOLLOW. i initially made it to sell on Ebay however i decided to give it off for free so here is the link. I MADE THIS GUIDE WITH SCREEN SHOTS WHEN I WAS UNLOCKING MY OWN E220 MODEM.IF YOU HAVE ANY PROBLEMS WITH THE GUIDE OR ANY SUGGESTIONS ON IMPROVEMENT LET ME KNOW.!!
Code:
http://rapidshare.com/files/199757476/E220_UNLOCK_final.rar
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sorry to say that, but you are violating copyright by publishing and hosting my software.
Please remove qmat from your package. For current QMAT versions, refer to
http://revskills.de
Cya,
Viper BJK
Did somebody try with E160?
I can't find software on huawei site for E160.
Maybe to try with devil slime tutorial ???
well il try somthing out for the E160 and let you know or maybe il try finding somthin that already exists
devil slime said:
well il try somthing out for the E160 and let you know or maybe il try finding somthin that already exists
Click to expand...
Click to collapse
Thank you in forward
Regarding the E160 I followed this tutorial, but the dump file does definitely not contain the unlock code as clear text.
In the comments of the linked tutorial there's a guy who has uploaded the dump files from before (commercially) unlocking his E160G and after including the unlock code, but it seems like the E160 uses some more complex algorythm.
huawei E160
i tried what devil slime had suggested and it worked untill the last part where i could not find the hex value 53 64 2c 00.........
Devil slime's tutorial, which is basicly the same as the one I linked, doesn't help at all, because the unlock code of the E160 is not contained in the dump file as clear text. To make it clear:
I've dumped my E160's ROM, extracted all 8-digit-numbers I could find in that file and I then tried to enter all numbers which could possibly (haven't tried those ending with two or more zeros) be the unlock code, but none of them worked. So again: the unlock code is not visible in the dump file - there's some more complex algorythm behind that unlock mechanism.
Hi,
I think the E160 unlocking code has 10 digits
The guy who has uploaded these files admits, his code had 8 digits.
inquisitor said:
The guy who has uploaded these files admits, his code had 8 digits.
Click to expand...
Click to collapse
OK, then why do 3 network enter 10 or 12 digits to unlock the E160 from their network?
As said before the tutorial doesnt display the 8 digit code(because it's 10 or 12 digits)
I can upload a tutorial and say it works and you'd be a beleiver of the crap just cause I uploaded it. HUH
Why don't you just extract all 10 and 12 digit codes and try them? In my dump file there are only two 10-digit-numbers, that could be an unlock code. If you send me your dump file, I can extract all 10-digit numbers with PHP-script. Since I have only one attempt left, I don't dare trying it.
ah.. this took me some time to figure out,.. but if you have all the files shouldnt take more than 20 mins to crack wide open..
great tut, I have the latest firmware and the original huawei dashboard..tried different sims and all worked fine after inserting the unlock code.
thanks for info.. and the tools
Get Bootloader Unlock Code + Avoiding the "you must use a phone account" message
EDIT: FORGET IT, THIS METHOD NO LONGER WORKS AS A SHORTCUT
Thanks to piskr for his original thread on rooting :good:
Got my H7 today, wanted to unlock the bootloader and root immediately...
However, using the url found in various threads - Mod Edit: Links Removed didn't work.
I got a message a lot of users on here have seen:"Sorry, you must use a phone account to submit this application."What did work:
Get a Huawei account (if you haven't already!)
Use the Chinese site...
DO NOT CHANGE TO ENGLISH! - This redirects to the site which fails
Mod Edit: Links Removed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In the first drop down, choose the middle option (SmartPhone)
The second drop down is the device list, my H7 has the model number PLK-L01 - this is not listed, so I used the nearest equivalent which was the PLK-TL01H
Serial Number goes in the next box.
MAIN IMEI goes in the next box
(Device code is not required on the Chinese site)
Fill in the Captcha
Hit the blue button
You should then receive a yellow box below the form with your unlock code in :victory:
(blanked out mine here, obviously!)
Now unlock (using the rest of piskr's post), get English TWRP from StripedShark here and enjoy your freedom
EDIT: this may not work any more - see here
Thanks a lot , it works for me
You gave us THE method , great !
Tested on my european PKL-L01 bought in Sweden now, working great! Thanks a lot for this guide
Mod Edit : Content Removed
I had network busy on my first attempt. Second time worked. Just keep trying I guess..
so do I, same error. Today always "Network busy, please try again later", the other english link gave me wrong product id... Booohhh
Getting a different error saying something about "You need to use the Huawei Cloud for 14 days before you can unlock your device"
Lordmau5 said:
Getting a different error saying something about "You need to use the Huawei Cloud for 14 days before you can unlock your device"
Click to expand...
Click to collapse
Damn, looks like they got wise, or were just slow updating the chinese site
sminki said:
Damn, looks like they got wise, or were just slow updating the chinese site
Click to expand...
Click to collapse
I don't need to have it rooted in the coming days anyway, it works fine even without root
I can wait the 14 days
Lordmau5 said:
I don't need to have it rooted in the coming days anyway, it works fine even without root
I can wait the 14 days
Click to expand...
Click to collapse
I had been waiting for more than a month but it didn't work anyway. I had to use that version with Facebook account and Huawei id generator.
Sent from PLK-TL01H
sminki said:
Thanks to piskr for his original thread on rooting :good:
I got a message a lot of users on here have seen:
"Sorry, you must use a phone account to submit this application."
What did work:
Click to expand...
Click to collapse
Thanks, works here as well... pfff finally after many unanswered mails to huawai
Simply login with a facebook account and you will be fine.
You will get your unlock code without a problem.
Facebook login does not work for me. Always tells me that username or password is wrong.
Thanksssssss:victory: Until now It was impossible , finally, I managed the code.
I managed to get the code, only using an account Facebook. Thank you!
Lordmau5 said:
Getting a different error saying something about "You need to use the Huawei Cloud for 14 days before you can unlock your device"
Click to expand...
Click to collapse
Hi,
I'm still stuck with the exact same error message as above. Some say to login with Facebook account instead but on the chinese website this option is not proposed. I don't know how to do while it has been now some weeks i'm trying to root this phone.
Thanks very much,
sebastien_be said:
Hi,
I'm still stuck with the exact same error message as above. Some say to login with Facebook account instead but on the chinese website this option is not proposed. I don't know how to do while it has been now some weeks i'm trying to root this phone.
Thanks very much,
Click to expand...
Click to collapse
hi,
i also got same problem with you. did you found any solution to this problem?
lockmunk said:
hi,
i also got same problem with you. did you found any solution to this problem?
Click to expand...
Click to collapse
hi,
in my case it is like that. Official profile fb did not help.
Aryman1983 said:
hi,
in my case it is like that. Official profile fb did not help.
Click to expand...
Click to collapse
You must have the same email address for Huawei ID and Facebook account if it still doesn't work create new account in Facebook and also in Huawei ID with the same email address and it will work.
Sent from PLK-TL01H
Lucki_X said:
You must have the same email address for Huawei ID and Facebook account if it still doesn't work create new account in Facebook and also in Huawei ID with the same email address and it will work.
Sent from PLK-TL01H
Click to expand...
Click to collapse
Hi,
I tried it many times and still not work.
Can you please help to retrieve the unlock code for me?
MODEL : PLK-L01
SN : H8WDU15814000014
IMEI : 867898020305495
PRODUCT ID : 39948725 56659901
Thanks.
Starting today, we are pleased to begin rolling out the highly anticipated Marshmallow update in the US. As part of this update, Honor 5X will also be receiving EMUI 4.0.
Is there anyway to force update it? Update is not showing up when I manually check in settings.
Super pumped to take marshmallow for a spin
I haven't been able to update either... I guess we just have to wait.
Update does not appear here too!
More: http://www.hihonor.com/us/blogs/honor-5x-gets-the-marshmallow-update/130547/
Forced update dial code *#*#2846579158#*#* does not work, fyi...
Between here, Honors' .com site and their US Facebook,
I don't see a Single user reporting the update.
Edit: I see one on Facebook, lol
If anyone gets the update or finds a download link please post here.
In the Facebook thread there's a guy named Mario who got it. The only confirmed one to get it so far if you guys want to try and teach him how to capture the OTA.
Will the update boot on a custom recovery?
Sent from my MSM8916 for arm64 using Tapatalk
garymachete said:
Will the update boot on a custom recovery?
Sent from my MSM8916 for arm64 using Tapatalk
Click to expand...
Click to collapse
I think you will end up stuck at boot logo. You'll probably want to return to stock first.
Has anyone received this update yet? Seems like a unicorn.
Hopefully someone will make a twrp flasheable zip right away. If not I will try by flashing stock recovery and see what happens. ?
jordant2 said:
I think you will end up stuck at boot logo. You'll probably want to return to stock first.
Has anyone received this update yet? Seems like a unicorn.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my KIW-L24 using XDA-Developers mobile app
While I have some American here with this phone. Im trying to get andriod pay to work. I was wonder if we used the NFC sim card from Verizon which is made with mobile payments in mind, would the phone recognize it. If anyone has an leads on this, can you please point me in the right direction?
sergiob1 said:
While I have some American here with this phone. Im trying to get andriod pay to work. I was wonder if we used the NFC sim card from Verizon which is made with mobile payments in mind, would the phone recognize it. If anyone has an leads on this, can you please point me in the right direction?
Click to expand...
Click to collapse
this phone does not have NFC, and what does this have to do with the MM update ?
clsA said:
this phone does not have NFC, and what does this have to do with the MM update ?
Click to expand...
Click to collapse
ok champ before you get all wired,
1. I know the phone does not come with an NFC chip in it.
2. I know this thread is for the MM update that Honor USA is lying about releasing.
3. I have already search about this in other threads, obviously to no avail.
4. Do you have input/ or are looking to bust somebodies chops on the internet.
Defensive much?
Let me answer your question about the NFC Sim, probably not. Probably not for all the tea in China. And this thread is about capturing the MM update which did come out because people on FB are confirming they got it.
dalladubb said:
Defensive much?
Let me answer your question about the NFC Sim, probably not. Probably not for all the tea in China. And this thread is about capturing the MM update which did come out because people on FB are confirming they got it.
Click to expand...
Click to collapse
not being defensive, probably not easy to convey over the internet. probably not as easy as waiting on this update.
People or Person? are we talking about Mario?
sergiob1 said:
not being defensive, probably not easy to convey over the internet. probably not as easy as waiting on this update.
People or Person? are we talking about Mario?
Click to expand...
Click to collapse
it's a GSM phone that doesn't support Verizon or NFC what else is their to say ?
user on XDA got the update through hisuite >> http://forum.xda-developers.com/honor-5x/how-to/guide-kiw-l24-to-stock-t3318268/page10
Maybe, the person who got it through HiSuite, can check the app data folder on Windows to see if the update is still there. (it's a hidden folder)
Hi XDA peeps,
I have recently brought a Huawei Mediapad M3 and i love it, but i would like to downgrade it so I can root it afterwards. Why downgrade? Because the on the official website where you're supposed to unlock the bootloader. You need to select whether the tablet is EMUI4/4.1 or EMUI 5. Because I have Nougat I do have EMUI 5, I need to select EMUI 5 on the website. However I can't set the category on "tablet", only "smartphone". It will ask for a IMEI/MEID number, which I dont have... You can select "tablet" only if I had EMUI4/4.1..
pic1: (replace https here ) puu.sh/xgE0a/5653d42650.png
pic2: (replace https here ) puu.sh/xgE2j/01998bb7ed.png
I was wondering if its possible to downgrade the M3(CN) to marshmellow. I saw there where tools available to downgrade for the US(Sorry, no US, my bad) and Eu version, but not for the chinese version. Does anyone know how to downgrade the M3? Or maybe a other way to unlock the bootloader, so i can install TWRP? I'd like to install a different rom.
Any other suggestions are welcome too!
ChinnyxD said:
Hi XDA peeps,
I have recently brought a Huawei Mediapad M3 and i love it, but i would like to downgrade it so I can root it afterwards. Why downgrade? Because the on the official website where you're supposed to unlock the bootloader. You need to select whether the tablet is EMUI4/4.1 or EMUI 5. Because I have Nougat I do have EMUI 5, I need to select EMUI 5 on the website. However I can't set the category on "tablet", only "smartphone". It will ask for a IMEI/MEID number, which I dont have... You can select "tablet" only if I had EMUI4/4.1..
pic1: (replace https here ) puu.sh/xgE0a/5653d42650.png
pic2: (replace https here ) puu.sh/xgE2j/01998bb7ed.png
I was wondering if its possible to downgrade the M3(CN) to marshmellow. I saw there where tools available to downgrade for the US and Eu version, but not for the chinese version. Does anyone know how to downgrade the M3? Or maybe a other way to unlock the bootloader, so i can install TWRP? I'd like to install a different rom.
Any other suggestions are welcome too!
Click to expand...
Click to collapse
I'm looking to downgrade the US version. Could you share where you found the tools to downgrade the US version? I've only been able to find rollback for the EU version.
ncguy68 said:
I'm looking to downgrade the US version. Could you share where you found the tools to downgrade the US version? I've only been able to find rollback for the EU version.
Click to expand...
Click to collapse
I'd swear i'd found a roll back for US, but it seems it doesn't exist. Otherwise you'd be able to download it from the official Huawei website. Sorry man.
You need to install Huawei tablet software (can't remember the name) on your pc and in there it will give you an option to rollback. That's what I had to do, to downgrade.
Sent from my BTV-W09 using Tapatalk
arowana88 said:
You need to install Huawei tablet software (can't remember the name) on your pc and in there it will give you an option to rollback. That's what I had to do, to downgrade.
Sent from my BTV-W09 using Tapatalk
Click to expand...
Click to collapse
You are the man! I installed HiSuite and it gave me the option to upgrade the firmware OR to downgrade to version Android 6.0 with EMUI 4.1.3(Chinese version). I've successfully got the unlock bootloader code from the huawei site. Going to install TWRP soon.. Thanks again!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*If you follow these instructions, do so at your own risk. I had success with it, I am not responsible for anything that might happen*
At this point, I could retrieve bootloader code from the huawei website and unlocked the tablet with these instructions: http://www.stechguide.com/unlock-bootloader-of-huawei-devices/
Installed ONLY twrp: https://forum.xda-developers.com/mediapad-m3/development/twrp-greatslon-mod-t3489232
Used "Firmware finder rewrite" to find the correct firmware. My case i wanted to flash to C100(EU): https://puu.sh/yjdFb/a295fb3207.png
Uploaded the zip files to the SD card, rebooted the tablet in TWRP(complete shutdown tablet, no cable connected, hold up and power button till screen turns on).
install update.zip then put the other zip in the queue. Install and reboot, enjoy.
It does not look like it comes with google play, browser or any bloatware(it dint work).
Since I now have EMUI 5, i needed to download twrp specially for emui 5.
Had some problems with not being able to open google play or gmail. I reinstalled the rom with this one: http://www.stechguide.com/huawei-mediapad-m3-b303-nougat-firmware/, cleared dalvik cache and set timezone in TWRP. After flashing the rom, did a factory reset. Now google play services work! Happy days
unlocked my sprint galaxy note 8 for any network domestic and international . As title states. Does not void warranty. No rooting no custom recovery. unlock. phone does not have to be paid off. Im using my sprint galaxy note 8 on sprint , and tmobile . So there legit options for us sprint note 8 users if you search. nice to be unlocked with no penalties from our carrier in my oppinion
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi!
How did you do it? My was unlocked but it updated to July's security patch and it locked. How can I unlock it again? I am in Mexico and really need to update it.
Curious here too.
Sent from my SM-N950U using Tapatalk
Search ebay for the unlock that says does not void warranty. Permanent unlock. Just serch sprint galaxy note 8 carrier unlock. And you will find the one. And i updated to july security patch and am still unlocked. It is permanent.
Will do.
Sent from my SM-N950U using Tapatalk
do you still have the link to the person you used on ebay how much did they charge you
I will upload the carrier unlocked modem after work that can be flashed with ODIN for a DIY Unlock
Delgoth said:
I will upload the carrier unlocked modem after work that can be flashed with ODIN for a DIY Unlock
Click to expand...
Click to collapse
Is this for carrier unlock?
Sent from my Note 8 (SM-N950U) using Tapatalk
IMBAE75 said:
Is this for carrier unlock?
Click to expand...
Click to collapse
https://forum.xda-developers.com/sp...to/sm-n950u-bootloader-rev-5-factory-t3903276
Still working flawless. On android 9.0 still unocked. All i do is pop in which sim card i want to use.dont have to change anything. It restarts and even puts the boot animation and carrier apps of which sim card i have in. On to rhe phone. And automattically sets the correct apn
Yup.
Check out my speeds. I get like 45 50 mbps down on sprint and 120-150 on tmobile crazy
alright. so i want to say i went this route as well. i have 3 months left on my sprint contract.that being said, i have the files he used during the unlocking process. the problem is there is another thing he did to actually unlock it. he used something called flexihub while it was in the combination firmware to actually do something on his machine that i couldnt see. this is something he did on the modem level, but i confirmed with him that it doesnt matter if i flash another firmware using odin, my sim will still be unlocked. i have tried this with verizon sim and it works. again, my contract is not up with sprint yet, which means my device shouldnt be unlocked, but this somehow works. if anyone else wants this, here is the ebay seller link that i got mine done within an hour. keep in mind that you have to back up your device, because what he does is flash firmware. also he will need access to your computer to work remotely, but he never strayed from what he was doing. for 7 bucks, this is a steal.
https://www.ebay.com/itm/Samsung-Ga...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649
kaibsora said:
alright. so i want to say i went this route as well. i have 3 months left on my sprint contract.that being said, i have the files he used during the unlocking process. the problem is there is another thing he did to actually unlock it. he used something called flexihub while it was in the combination firmware to actually do something on his machine that i couldnt see. this is something he did on the modem level, but i confirmed with him that it doesnt matter if i flash another firmware using odin, my sim will still be unlocked. i have tried this with verizon sim and it works. again, my contract is not up with sprint yet, which means my device shouldnt be unlocked, but this somehow works. if anyone else wants this, here is the ebay seller link that i got mine done within an hour. keep in mind that you have to back up your device, because what he does is flash firmware. also he will need access to your computer to work remotely, but he never strayed from what he was doing. for 7 bucks, this is a steal.
https://www.ebay.com/itm/Samsung-Galaxy-S8-S8-Plus-Active-Note-8-Sprint-Remote-Unlock-Service/192719635363?ssPageName=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649
Click to expand...
Click to collapse
Hey this ebay link does not work anymore can you guys tell me the sellers info so i can contact him thru ebay directly? Thanks in advance. My Note 8 has been just a wifi only paper weight for over a year now cause i cant switch carriers.