Related
Hi guys, every time I flash my phone it doesnt seem to do anything. It just reboots up with stock rooted stock firmware. I dont know what I am doing wrong. I have used odin, mobile odin, twrp, cwm and still I cant get anything to work. i have tried to flash pacman, google play edition and several others with no affect. i am completely stumped
hester1902 said:
Hi guys, every time I flash my phone it doesnt seem to do anything. It just reboots up with stock rooted stock firmware. I dont know what I am doing wrong. I have used odin, mobile odin, twrp, cwm and still I cant get anything to work. i have tried to flash pacman, google play edition and several others with no affect. i am completely stumped
Click to expand...
Click to collapse
Try flashing Philz Touch recovery, its the most stable recovery imo. Available for both the I9500 and I9505.Flash the .tar file with Odin in PDA.
I keep getting the message e signature verification failed. i have used auto root. i have enabled usb debugging. i have done everything in the steps of the rooting process and flashing process.
Slight progress
So I downloaded CWM recovery again and toggled off signature verification and I successfully managed to install my ROM. New porblem now, when I reboot the device it goes straight back to recovery mode every single time? Help please?
Hi - so I dont know if you guys think Im being stupid and/or lazy and havent found the right thread or if I am just asking a stupid question. If I am would someone kindly point me in the right direction and forgive my ignorance. If I am not being stupid can someone PLEASE help me with an answer. I have posted on several forums with this question and no one seems prepared to offer a solution. This is by no means a rant at forum members - I just hate being defeated by technology - and I have waited a week now for someone to offer me some much needed guidance.
Hi All,
I just got an SPH-i337 yesterday and attempted to Root + Install Mod.
I ended up rooting and installing Safestrap (TWRP 2.6.x.x). Upon first use I backed up my current OS to a removable SD card using the utility in TWRP. I then, because I was not clear on how to download install CM which was what I was going to, installed ROM Manager and selected CM without setting up a ROM slot. I think this is where I went wrong.
Upon reboot, I was unable to access the Stock ROM and had no options to go to CM. When I attempted to perform a restore from my backup on SD it failed as well and keeps going to the Android recovery screen (not TWRP).
I'm now just trying to go back to stock and have tried using both Heimdall and Odin to no avail. Odin at least provides an error message:
SW REV. CHECK FAIL: Fused:4, Binary:1. What does this mean? That I'm attempting to use an image (.tar.md5 file) which is not current? Is there a way that I can still recover my phone?
..also, please let me know if there are pieces of information that I'm missing. I don't have much to go off of since the firmware and other information (I believe) is not able to be accessed.
Again I just got the phone yesterday. I also have about 40 tabs open that are full of searches that I've been doing regarding this. As yet, no luck.
revolut10n said:
..also, please let me know if there are pieces of information that I'm missing. I don't have much to go off of since the firmware and other information (I believe) is not able to be accessed.
Again I just got the phone yesterday. I also have about 40 tabs open that are full of searches that I've been doing regarding this. As yet, no luck.
Click to expand...
Click to collapse
Look for the mk2 tar files. And do a lot of reading. You went wrong in a number of different areas
revolut10n said:
Hi All,
I just got an SPH-i337 yesterday and attempted to Root + Install Mod.
I ended up rooting and installing Safestrap (TWRP 2.6.x.x). Upon first use I backed up my current OS to a removable SD card using the utility in TWRP. I then, because I was not clear on how to download install CM which was what I was going to, installed ROM Manager and selected CM without setting up a ROM slot. I think this is where I went wrong.
Upon reboot, I was unable to access the Stock ROM and had no options to go to CM. When I attempted to perform a restore from my backup on SD it failed as well and keeps going to the Android recovery screen (not TWRP).
I'm now just trying to go back to stock and have tried using both Heimdall and Odin to no avail. Odin at least provides an error message:
SW REV. CHECK FAIL: Fused:4, Binary:1. What does this mean? That I'm attempting to use an image (.tar.md5 file) which is not current? Is there a way that I can still recover my phone?
Click to expand...
Click to collapse
revolut10n said:
..also, please let me know if there are pieces of information that I'm missing. I don't have much to go off of since the firmware and other information (I believe) is not able to be accessed.
Again I just got the phone yesterday. I also have about 40 tabs open that are full of searches that I've been doing regarding this. As yet, no luck.
Click to expand...
Click to collapse
Safestrap only works with other TW ROMS, so your first issue was trying to use CM. Second, it's not official TWRP and is not even installed to the recovery partition so using ROM Manager was your second issue. Trying to boot into recovery normally will take you to stock recovery since it isn't installed in the recovery partition, there should be a splash screen that comes up after the Samsung Galaxy S4 screen asking to either press for recovery or continue. If that works, you can use the backup from there. If it's gone, you have to use ODIN. The reason you get that SW REV. CHECK FAIL is because you're trying to flash an older firmware than you have. Depending on if you were on 4.2.2 or 4.3 you will either need the MF3 or MK2 .tar.md5 respectively.
jd1639 said:
Look for the mk2 tar files. And do a lot of reading. You went wrong in a number of different areas
Click to expand...
Click to collapse
Thanks for pointing me to those files. I'm sure I did go wrong in a few places as I felt that I was largely just winging it.. There's a TON of information out there. Is there anything specific that I was more wrong than the rest?
revolut10n said:
Thanks for pointing me to those files. I'm sure I did go wrong in a few places as I felt that I was largely just winging it.. There's a TON of information out there. Is there anything specific that I was more wrong than the rest?
Click to expand...
Click to collapse
Deadly sin said it all. Cm and rom manager. Here are the files you need http://forum.xda-developers.com/showthread.php?p=49687770
Thanks everyone. Hell of an introduction to Android, I have to say considering I just got off the WinPhone bandwagon yesterday (been using it for ~7 years).
revolut10n said:
Thanks everyone. Hell of an introduction to Android, I have to say considering I just got off the WinPhone bandwagon yesterday (been using it for ~7 years).
Click to expand...
Click to collapse
The s4 is a very difficult phone to use custom roms on. Once you're back up and running start here and read a lot before doing anything with it http://forum.xda-developers.com/showthread.php?p=42320391
jd1639 said:
The s4 is a very difficult phone to use custom roms on. Once you're back up and running start here and read a lot before doing anything with it http://forum.xda-developers.com/showthread.php?p=42320391
Click to expand...
Click to collapse
Now you tell me - after I've been trying to do this for 12+ hours. Many thanks though - it looks like the MK2 AiO files are working.
jd1639 said:
The s4 is a very difficult phone to use custom roms on. Once you're back up and running start here and read a lot before doing anything with it http://forum.xda-developers.com/showthread.php?p=42320391
Click to expand...
Click to collapse
Unfortunately, it seems that I can't use the method listed directly on that page on account of running the MK2 baseband. If I'm going to go forward it looks like I'll have to use SafeStrap and unofficial TWRM + TW mods for the time being.
Of course, if something about what I'm saying is wrong, I'd be glad to hear it.
revolut10n said:
Unfortunately, it seems that I can't use the method listed directly on that page on account of running the MK2 baseband. If I'm going to go forward it looks like I'll have to use SafeStrap and unofficial TWRM + TW mods for the time being.
Of course, if something about what I'm saying is wrong, I'd be glad to hear it.
Click to expand...
Click to collapse
Check my last Post #50 it should get u an idea and where to find related link. Also check that MK2 INDEX & ROM LIST ....:good:
ive had my note 3 for awhile and have avoided rooting or modding it in any way for quite sometime, but i rooted the stock firmware i believe it was 4.4.2???? im not 100% with towelroot and i was able to install safestrap thats where my success ended I didnt make any backups for whatever dumb reason and also it has been quite sometime since modding any phones, now my phone wont boot into any rom ive tried i have tried two so far and i cant get the factory one back, half the time i cant install roms and the rest of the time they work but they wont boot ive tried creating rom slots but those dont work, read somewhere they arent supported in 4.4.2 ???? and when i tried overwriting the factory it still didnt work, now my phone wont boot into anything anymore and im not quite sure what i did wrong and if there is any way to fix it, i would have like to install knoxraid on this phone since it supposedely fixes the gps issues lots of people have when i try to install that particular rom i get a successful message but then when i wipe cache/dalvik it work and then i hit reboot nothing happens, all i get is a black screen oh and its says that safestrap is disabled
can anyone help i could really use some help here
ecuadorche said:
ive had my note 3 for awhile and have avoided rooting or modding it in any way for quite sometime, but i rooted the stock firmware i believe it was 4.4.2???? im not 100% with towelroot and i was able to install safestrap thats where my success ended I didnt make any backups for whatever dumb reason and also it has been quite sometime since modding any phones, now my phone wont boot into any rom ive tried i have tried two so far and i cant get the factory one back, half the time i cant install roms and the rest of the time they work but they wont boot ive tried creating rom slots but those dont work, read somewhere they arent supported in 4.4.2 ???? and when i tried overwriting the factory it still didnt work, now my phone wont boot into anything anymore and im not quite sure what i did wrong and if there is any way to fix it, i would have like to install knoxraid on this phone since it supposedely fixes the gps issues lots of people have when i try to install that particular rom i get a successful message but then when i wipe cache/dalvik it work and then i hit reboot nothing happens, all i get is a black screen oh and its says that safestrap is disabled
can anyone help i could really use some help here
Click to expand...
Click to collapse
May I know which variant on Note3 you are using.
and what's the OS version? 4.3? or 4.4.2 or 4.4.4
what's your region (CSC).??
I would suggest you to go into download mode and download appropriate stock firmware from SamMobile or from Samsung Updates (Link for N9005) and flash Stock ROM using ODIN.
Thanks.
First want to say hi and that this site is full of knowledge so any help with my subject will be great.
Got a att s4 sgh-i337 phone. I rooted it before the lollipop ota update was out and everything went fine. Then the lollipop update came out and I followed one of the methods on keeping root and updating to 5.0.1 lollipop on the phone. Everything went fine with that. Still showed root status and never did the phone brick or have any issues in the updating.
At some point though, I did run triangle away because I would have the custom logo and opened padlock when the phone would boot up. I knew it wasn't a huge deal but the counter showed correct and never could just figure out how to get it to go away. Either way, I did run it and I think rebooting twice, the factory loading image came back to it. Now it shows my current status as 0 for the counter and the binary is Official.
I have not tried to load any roms or nothing like this to the phone, just followed the instructions to give it root access so I could run a few different apps and adaway for when I listen to Spotify.
One day, I was trying to install a new version of Words with Friends and it failed because I think wwf was open, but I did go back and install it. For some reason now, my phone never notifies my with a wwf notification when somebody plays me. Every now and then, it might pop up when I restart the phone but that is it. I don't think facebook notifies me everytime also but was more worried about words with friends.
Searching google, it says to go into recovery mode and flash the cache of the phone there. I have done the cache memory in the phone but that has not fixed my problem. When trying to go to recovery, it never works, it would always show, recovery booting and then load the phone up as normal.
I have download quick boot and rom manager since they all have an option to boot into recovery rather than pressing the buttons but it always does the same thing. Reading the web though, it seemed like I needed to install a different recovery than the factory I guess, so using rom manager, I tried twrp and that didn't work so I installed ClockworldMod 6.0.4.7. Rom manager shows that as the current recovery method.
When I try to boot into recovery, it still shows that recovery is booting and then goes straight to loading the phone as it should normally.
Now though, every time I restart my phone, it says recovery is trying to boot but never does.
How do I fix my phone to be able to boot into recovery and it not try to boot every time it powers on. I have tried searching google but I just just can find an answer to my direct problem. I know how to hold the buttons and go to recovery but does not work, and I also know how to get to it from the different app programs(rom manager and quick boot) but they do not work either. It would be nice to get the wwf notifications to work properly again also.
If you need any information from my phone, please ask. Thanks for any help on my matter,
Charlie
Odin stock and start over.
Apparently, you are not aware that the boot loader is locked, preventing the installation of a custom kernel. You can not use twrp, or rom manager. Rom manager itself may cause issues.
I agree you should flash back to stock and start over to get a clean install. Hopefully, this will solve the issues with notifications as well. You can use the "[GUIDE]Odin to Stock, Updating, Rooting, and Installing Safestrap" by guut13 in the general forum for files and instructions.
creepyncrawly said:
Apparently, you are not aware that the boot loader is locked, preventing the installation of a custom kernel. You can not use twrp, or rom manager. Rom manager itself may cause issues.
I agree you should flash back to stock and start over to get a clean install. Hopefully, this will solve the issues with notifications as well. You can use the "[GUIDE]Odin to Stock, Updating, Rooting, and Installing Safestrap" by guut13 in the general forum for files and instructions.
Click to expand...
Click to collapse
Thanks for the replies guys, I really don't know a whole lot about rooting other than following instructions about it. I was unaware you could not use the twrp or cwr as a recovery. My recovery did not work before so that is why I was trying to install those. I knew you could not install custom roms but I did not know that you could not use rom manager to install custom recoveries.
I appreciate the help so far and I will look into that thread you mentioned. I haven't read it but will this take me back to stock lollipop 5.0.1 and I just reinstall apps or will I have to re-root the phone.
Charlie
please delete, sorry
Charlie
You have to go back to 4.4.4, to the nb1 base, root with towelroot, and then use the keeproot method to get back to 5.0.1 rooted. The instructions are in the guide, and also a link to the keeproot thread is there.
By the way, for future reference, questions, help and troubleshooting issues should go in the Q&A forum, not the general forum.
not having any luck
Ok guys,
I am trying to follow the guide but not having much luck.
I downloaded the I337UCUFNB1_4.4_Stock_Odin_tar and put it in the AP Odin file. I'm not sure if I should be using it or the other file named I337UCUFNB1_4.4_Rootable_Stock_Odin_tar to begin with. The instructions said to use the first one so that is the one I was trying to use.
After putting the first file in the AP slot of Odin and hitting start, it begins to try to do it's thing and then says it fails!
What do I do now? Am I doing something wrong or what because I'm trying to follow instructions but not having much luck.
Please help. Sorry for posting in the wrong area also in the beginning.
Charlie
I'm screwed
Now when I turn my phone on, it says Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again?
doing better now
Pretty sure I got it going finally. I changed cords and then changed ports on my computer and it finally did go back to stock without an error. I'm currently back on Lollipop and rooted so now is the fun of reinstalling contact info and anything else. So far I have not rebooted but it was not showing the recovery booting option when it did reboot. Hoping my notifications work properly now also!
Thanks!!!
Charlie
Ok guys, here's the deal. i bought a secondhand s4 which was advertised as a google edition. it has a couple of annoying issues, first i noticed it switching itself off and on. the worst problem with it is that when my battery goes reeeally dead it just bootloops when i have recharged. the only way i can get it back on is to start it in recovery mode (which is clockworkmod v6.0.4.4) then do a factory wipe. so yeah thats a major pain. the s4 itself is a red model and behind the battery it says its a gt-19505, however in the settings on the phone it says its a gt-19505g.
my goal is to install an official firmware if possible that i may be able to update easily, the worry that i have is that i dont know if it would then accept my network as although it appears to run google edition custom firmware it may not once i install something official on it. this may be a nooby statement i know but a noob i am lol.
if its at all possible could i keep the cwm recovery?
and if its any help when i load the other boot loader thingy (with the green android on it) in the top left it says gt-19505, im just sayin cus im sure its vital which ever this phone actually is.
here are as many details as i can give but please ask if im missing anything
ANDROID VERSION 4.4.2
KERNEL VERSION 3.4.0-faux123-KK44-GE-Custom
[email protected]omain #20
Sun Dec 1 02:30:28 CST 2013
BASEBAND VERSION 19505XXUFNA1
BUILD NUMBER KOT49H.S001.131204
also upon booting in the top left it says "kernel is not seandroid enforcing
set warranty bit:kernel"
THANKS FOR YOUR TIME And please tell me where to start as i tried updating it via kies to fix it but it just wont connect, i assume due to custom firmware.
The Google Play Edition S4 devices didn't come in any color but white. Therefore, this is an I9505 with a custom ROM on it. The download mode screen reading GT-I9505 confirmed it.
Since this is an I9505 and not an I9505G, the main question is whether this device will work with your SIM card. For that, simply insert your SIM card and boot the device. If you get signal, you're good. Otherwise you'll have to unlock the device, either by purchasing an unlock code from one of the sites that sells them, or by trying the unlock methods available on the forums.
This will also help answer the question of which stock ROM you can install on the device. If the S4 doesn't prompt you to unlock the device, then you can install one of the unbranded S4 ROMs available on sammobile.com. After that, you can put the recovery of your choice on the S4, though I recommend TWRP over the other options.
Thanks for your help. I'm a little confused though, at the moment with this custom google edition ROM it does take my sim, in fact I bet it takes any sim, I heard that was a feature of google play devices. What I meant was after I install the stock ROM will it then not take my sim. So if it has already been unlocked How would I know which ROM to install? As I now know its not a google edition, is it possible to install an official google edition ROM? Do i use this download mode, Odin, or cwm to install a firmware. I'm just not sure what my starting point is. I don't wanna follow someone's guide yet to installing something just in case I'm jumping the gun and need to uninstall this custom ROM somehow.
Sorry for asking questions that I'm sure seem dumb I'm really just trying to learn at the moment I'm green as they come with android. BTW thanks for your suggestions so far, you def seem like you know what you're talking about, cheers
Google Play devices are carrier unlocked, but this is not a Google Play Edition S4. Therefore the device was carrier unlocked at some point in its past. The unknown here is how the original owner unlocked the device. If he or she used the unlocking methods found on XDA there is a chance the lock will be lost when installing a stock ROM.
If the S4 is unlocked, you aren't restricted to a particular region and can install any I9505 ROM using Odin, though I recommend the carrier unbranded ROMs. You cannot install a stock Google Play Edition ROM on the device as the model number of a GPE device is not the same as the device you have. However, you're already rooted and have a custom recovery installed. In I9505 Development here on XDA there is a Google Play Edition ROM that can be installed on your device. Download it to your S4, wipe everything in recovery, then flash the ROM's flashable zip in recovery. I've used said ROM and it works quite well.
OK I have found the 5.0.1 ge ROM , but in there it says I must use latest recovery or whatever plus it recommended one different to mine, is it safe to install using my version of cwm or do I need to learn how to change it??
Deleted by user
TWRP is recommended as there are people who are still maintaining it, unlike Clockworkmod and Philz. While you probably can get the ROM installed using the version of Clockworkmod you have, learning how to change recoveries is useful.
OK thank you for all your help my friend, I will now find out how to do this, I'm sure there is a section on this somewhere, BTW I think you are right about my device being rooted, but I wanted to check and I followed a guide and used super su but apparently its not rooted so I guess something must've gone wrong. Bit scary if I try to change my recovery or my firmware and this causes a brick hmmmmm
It's virtually impossible to brick the S4, especially as the recovery is flashed through Odin.
Phew that's a relief. Thanks man.... Well I'm gonna just risk using cwm for now as I'm new to this........ Thanks a whole lot for your time I really mean that.
KlLLFRENZY said:
Phew that's a relief. Thanks man.... Well I'm gonna just risk using cwm for now as I'm new to this........ Thanks a whole lot for your time I really mean that.
Click to expand...
Click to collapse
Use TWRP. CMW is outdated.
Lennyz1988 said:
Use TWRP. CMW is outdated.
Click to expand...
Click to collapse
I want to, I really do but I'm struggling here. Before I wrote that last comment I tried to find a guide on this forum for swapping to twrp, but couldn't and didn't wanna bug this guy as he had helped enough. Anyway I went to the place he told me and have hit another wall anyway because I don't know how to use the firmware the relevant kernel or the git. My life is so busy and I'm getting about an hour on this subject a day and its gonna take forever lol
If you can help me on my way even a little its much appreciated, I would like to use twrp and the 5.0.1 ge plus the right kernel of course
KlLLFRENZY said:
I want to, I really do but I'm struggling here. Before I wrote that last comment I tried to find a guide on this forum for swapping to twrp, but couldn't and didn't wanna bug this guy as he had helped enough. Anyway I went to the place he told me and have hit another wall anyway because I don't know how to use the firmware the relevant kernel or the git. My life is so busy and I'm getting about an hour on this subject a day and its gonna take forever lol
If you can help me on my way even a little its much appreciated, I would like to use twrp and the 5.0.1 ge plus the right kernel of course
Click to expand...
Click to collapse
https://twrp.me/devices/samsunggalaxys4internationalqualcomm.html
Follow the Odin guide. It's excactly the same when you flashed CWM.
@Lennyz1988: The S4 was bought secondhand and already had CWM on it from the original owner.
@killfrenzy: Follow the guide Lenny mentioned, but don't worry about the second paragraph. Our device isn't one of those that restores the original recovery on boot.
ok will do, i just tried the app install method but as i suspected, it said root is required for this app and promptly exited so i shall do the odin method, i heard that some people remove root or it could be that it was done wrong. also after reading a few posts here and there i found out that someone had similar issues with their phone random re-booting and they had custom ge with the wrong kernel so it seems once im done my issues should be history if i learn how to install fw + kernel, after this twrp thing i will be one step closer for sure. i also know ppl slate lollipop but once im all done with this im sure i will have picked up enough terminology to install cfw's to my hearts content. hooray for forums and people like you, sounds like im kissin ass but its just gratitude
so using the twrp install guide i gotta install using the odin method i have now got 3.07 odin but this is the next step.........
Odin Install Method (No Root Required):
You will need to download and install Odin on your PC. Once you have Odin installed, download the proper .tar file for your device from the download link above. Power off your device. Turn on your device using the proper key combo to get into download mode and attach the device to your computer via a USB cable. Use the PDA tab or button to browse to and select the tar file that you downloaded and flash the device.
lololol nothins ever simple i see the list of tar files in the link above but no mention at all as to which is the proper .tar for my device, i guess they assume the guide is for people who have done it before. more research tomorrow maybe i gotta be up early ugh
Lennyz1988 said:
https://twrp.me/devices/samsunggalaxys4internationalqualcomm.html
Follow the Odin guide. It's excactly the same when you flashed CWM.
Click to expand...
Click to collapse
Think you misunderstood, I have flashed nothing yet I got it like this. I'm completely green
Don't suppose anybody knows which is the tar file for my device?? S4gt-19505
OK now I get it, the list of tars in that section are all the same just newer builds of the same version. Seems obvious if you have done this before, but I wasn't to know that and cannot assume things. I'm also gonna guess and say Lenny thinks my s4 needs this particular version for an international, am I right?? Anyway it would've made a lot of sense but how does he know. I have no idea what this phone was I have never owned it new.
Different devices have different codes. For example, jfltexx is the I9505. A T-Mobile S4 would be jfltetmo, and so on.The link Lenny provided is for the I9505. Download the 2.8.6.0 version as its the latest.
As to how you were supposed to know, having never owned one, you weren't. There are tutorials in the General forum though that can help.