[Q] Flashing help - Galaxy S 4 Q&A, Help & Troubleshooting

Hi guys, every time I flash my phone it doesnt seem to do anything. It just reboots up with stock rooted stock firmware. I dont know what I am doing wrong. I have used odin, mobile odin, twrp, cwm and still I cant get anything to work. i have tried to flash pacman, google play edition and several others with no affect. i am completely stumped

hester1902 said:
Hi guys, every time I flash my phone it doesnt seem to do anything. It just reboots up with stock rooted stock firmware. I dont know what I am doing wrong. I have used odin, mobile odin, twrp, cwm and still I cant get anything to work. i have tried to flash pacman, google play edition and several others with no affect. i am completely stumped
Click to expand...
Click to collapse
Try flashing Philz Touch recovery, its the most stable recovery imo. Available for both the I9500 and I9505.Flash the .tar file with Odin in PDA.

I keep getting the message e signature verification failed. i have used auto root. i have enabled usb debugging. i have done everything in the steps of the rooting process and flashing process.

Slight progress
So I downloaded CWM recovery again and toggled off signature verification and I successfully managed to install my ROM. New porblem now, when I reboot the device it goes straight back to recovery mode every single time? Help please?

Hi - so I dont know if you guys think Im being stupid and/or lazy and havent found the right thread or if I am just asking a stupid question. If I am would someone kindly point me in the right direction and forgive my ignorance. If I am not being stupid can someone PLEASE help me with an answer. I have posted on several forums with this question and no one seems prepared to offer a solution. This is by no means a rant at forum members - I just hate being defeated by technology - and I have waited a week now for someone to offer me some much needed guidance.

Related

Phone stuck at startup on sprint screen

Hi everyone,
Ill apologize in advance, i am a complete noob, and this is my first venture into rooting and such. As a result I dont know what I am doing and now my phone is stuck in boot. I was trying to perform the wifi hotspot mod on my MDL rooted GS4 using the root file manager method. Obviously I messed something up because when i transferred the files, the phone immediately rebooted itself and got stuck booting on the sprint screen. I am looking for some help on how to get my phone working again. I am thinking I will need to flash the stock rom onto the device and start from scratch. Is this correct? I am totally lost and I know I should search to figure it out but I need to get my phone up and working again.
Thanks for the help.
roadsterdave said:
Hi everyone,
Ill apologize in advance, i am a complete noob, and this is my first venture into rooting and such. As a result I dont know what I am doing and now my phone is stuck in boot. I was trying to perform the wifi hotspot mod on my MDL rooted GS4 using the root file manager method. Obviously I messed something up because when i transferred the files, the phone immediately rebooted itself and got stuck booting on the sprint screen. I am looking for some help on how to get my phone working again. I am thinking I will need to flash the stock rom onto the device and start from scratch. Is this correct? I am totally lost and I know I should search to figure it out but I need to get my phone up and working again.
Thanks for the help.
Click to expand...
Click to collapse
You can flash any version of the one-clicks, including the "No data" ones for this.
Once the ROM mods are cleaned out it should boot again.
I still havent flashed a rom yet. So I assume I would use odin to flash? Where would I find these "one-clicks"? What does the "no data" version mean? Is 3.07 the most recent version of odin? Just want to make sure I have all the settings right.
Again, thanks so much for the help.
I had this issue yesterday you need to flash stock mdc then apply the update then root using the cf auto root method http://forum.xda-developers.com/showthread.php?t=2291827
Sent from my SPH-L720 using xda premium
Got it working! Thanks guys for helping and dealing with my ignorance. I think I'm slowly figuring this stuff out. It was just stressful as it took about 6 hours to download the stock firmware.

[Q] Need a kind soul to help me out with rooting/rom install process

Hey there, is there a kind soul out there who can help me out with the whole process of rooting and installing a custom rom?
I've been searching and trying out things for a lot of hours now, and I've reached a dead end. I have no clue what I'm doing.
I have skype/teamspeak/teamviewer
- Flash TWRP recovery with Odin.
- Wipe in the recovery.
- Flash the rom you want.
Lennyz1988 said:
- Flash TWRP recovery with Odin.
- Wipe in the recovery.
- Flash the rom you want.
Click to expand...
Click to collapse
I've been trying to flash TWRP for some time now, just keeps failing and then rebooting. I will try a bit more and report back. Thanks for your help.
Any idea how I install a kernel?
Even though I've done this stuff before on my SGS1, I'm totally blank.
Update: Found the .tar file after some digging, let's see if it works
Update1: Nothing happened. I am lost tbh. I've got 20+ things downloaded and NONE are working the intended way.
Update2: I think I've succesfully rooted the phone now (even though it should've been already) It says that I have no binaries installed?
Update3: Sorry for venting, but I'm really annoyed at this point. Nothing is working, even though I'm following every thread I see step by step.
Update4: Tried flashing with odinv3.09 instead of v3.04, and now I can't access my recovery anymore. -.-
Update5: I'm giving up, I'm not touching ANYTHING until I can get some help. If I do more and fail, I think I'm going to throw the phone at the wall out of frustration. /vent
PhilGizzle said:
I've been trying to flash TWRP for some time now, just keeps failing and then rebooting. I will try a bit more and report back. Thanks for your help.
Any idea how I install a kernel?
Even though I've done this stuff before on my SGS1, I'm totally blank.
Update: Found the .tar file after some digging, let's see if it works
Update1: Nothing happened. I am lost tbh. I've got 20+ things downloaded and NONE are working the intended way.
Update2: I think I've succesfully rooted the phone now (even though it should've been already) It says that I have no binaries installed?
Update3: Sorry for venting, but I'm really annoyed at this point. Nothing is working, even though I'm following every thread I see step by step.
Update4: Tried flashing with odinv3.09 instead of v3.04, and now I can't access my recovery anymore. -.-
Update5: I'm giving up, I'm not touching ANYTHING until I can get some help. If I do more and fail, I think I'm going to throw the phone at the wall out of frustration. /vent
Click to expand...
Click to collapse
What's your phone model? It is described in the download mode.
Uncheck auto-reboot before flashing the recovery in Odin.
Almost all Odin errors can be resolved by a different usb port and/or different usb cable.
Lennyz1988 said:
What's your phone model? It is described in the download mode.
Uncheck auto-reboot before flashing the recovery in Odin.
Almost all Odin errors can be resolved by a different usb port and/or different usb cable.
Click to expand...
Click to collapse
It's a GTI9505
I tried doing that, I did get Philz recovery installed, now I accidentally deleted the stock rom on my phone.
I did find a good usb port, and should be working (I've got drivers installed)
Philz recovery wants me to root my phone, but I guess I can't do that when I have no ROM installed.
Update: I have succesfully installed a 4.4 kitkat rom. Now, my intention is to upgrade to lollipop, and I'm afraid to break my phone at this point, so if I can get some help it would be much appreciated.
PhilGizzle said:
It's a GTI9505
I tried doing that, I did get Philz recovery installed, now I accidentally deleted the stock rom on my phone.
I did find a good usb port, and should be working (I've got drivers installed)
Philz recovery wants me to root my phone, but I guess I can't do that when I have no ROM installed.
Update: I have succesfully installed a 4.4 kitkat rom. Now, my intention is to upgrade to lollipop, and I'm afraid to break my phone at this point, so if I can get some help it would be much appreciated.
Click to expand...
Click to collapse
You won't break it, just keep doing what you are doing.

[Q] Phone has no recovery and other issues.

First want to say hi and that this site is full of knowledge so any help with my subject will be great.
Got a att s4 sgh-i337 phone. I rooted it before the lollipop ota update was out and everything went fine. Then the lollipop update came out and I followed one of the methods on keeping root and updating to 5.0.1 lollipop on the phone. Everything went fine with that. Still showed root status and never did the phone brick or have any issues in the updating.
At some point though, I did run triangle away because I would have the custom logo and opened padlock when the phone would boot up. I knew it wasn't a huge deal but the counter showed correct and never could just figure out how to get it to go away. Either way, I did run it and I think rebooting twice, the factory loading image came back to it. Now it shows my current status as 0 for the counter and the binary is Official.
I have not tried to load any roms or nothing like this to the phone, just followed the instructions to give it root access so I could run a few different apps and adaway for when I listen to Spotify.
One day, I was trying to install a new version of Words with Friends and it failed because I think wwf was open, but I did go back and install it. For some reason now, my phone never notifies my with a wwf notification when somebody plays me. Every now and then, it might pop up when I restart the phone but that is it. I don't think facebook notifies me everytime also but was more worried about words with friends.
Searching google, it says to go into recovery mode and flash the cache of the phone there. I have done the cache memory in the phone but that has not fixed my problem. When trying to go to recovery, it never works, it would always show, recovery booting and then load the phone up as normal.
I have download quick boot and rom manager since they all have an option to boot into recovery rather than pressing the buttons but it always does the same thing. Reading the web though, it seemed like I needed to install a different recovery than the factory I guess, so using rom manager, I tried twrp and that didn't work so I installed ClockworldMod 6.0.4.7. Rom manager shows that as the current recovery method.
When I try to boot into recovery, it still shows that recovery is booting and then goes straight to loading the phone as it should normally.
Now though, every time I restart my phone, it says recovery is trying to boot but never does.
How do I fix my phone to be able to boot into recovery and it not try to boot every time it powers on. I have tried searching google but I just just can find an answer to my direct problem. I know how to hold the buttons and go to recovery but does not work, and I also know how to get to it from the different app programs(rom manager and quick boot) but they do not work either. It would be nice to get the wwf notifications to work properly again also.
If you need any information from my phone, please ask. Thanks for any help on my matter,
Charlie
Odin stock and start over.
Apparently, you are not aware that the boot loader is locked, preventing the installation of a custom kernel. You can not use twrp, or rom manager. Rom manager itself may cause issues.
I agree you should flash back to stock and start over to get a clean install. Hopefully, this will solve the issues with notifications as well. You can use the "[GUIDE]Odin to Stock, Updating, Rooting, and Installing Safestrap" by guut13 in the general forum for files and instructions.
creepyncrawly said:
Apparently, you are not aware that the boot loader is locked, preventing the installation of a custom kernel. You can not use twrp, or rom manager. Rom manager itself may cause issues.
I agree you should flash back to stock and start over to get a clean install. Hopefully, this will solve the issues with notifications as well. You can use the "[GUIDE]Odin to Stock, Updating, Rooting, and Installing Safestrap" by guut13 in the general forum for files and instructions.
Click to expand...
Click to collapse
Thanks for the replies guys, I really don't know a whole lot about rooting other than following instructions about it. I was unaware you could not use the twrp or cwr as a recovery. My recovery did not work before so that is why I was trying to install those. I knew you could not install custom roms but I did not know that you could not use rom manager to install custom recoveries.
I appreciate the help so far and I will look into that thread you mentioned. I haven't read it but will this take me back to stock lollipop 5.0.1 and I just reinstall apps or will I have to re-root the phone.
Charlie
please delete, sorry
Charlie
You have to go back to 4.4.4, to the nb1 base, root with towelroot, and then use the keeproot method to get back to 5.0.1 rooted. The instructions are in the guide, and also a link to the keeproot thread is there.
By the way, for future reference, questions, help and troubleshooting issues should go in the Q&A forum, not the general forum.
not having any luck
Ok guys,
I am trying to follow the guide but not having much luck.
I downloaded the I337UCUFNB1_4.4_Stock_Odin_tar and put it in the AP Odin file. I'm not sure if I should be using it or the other file named I337UCUFNB1_4.4_Rootable_Stock_Odin_tar to begin with. The instructions said to use the first one so that is the one I was trying to use.
After putting the first file in the AP slot of Odin and hitting start, it begins to try to do it's thing and then says it fails!
What do I do now? Am I doing something wrong or what because I'm trying to follow instructions but not having much luck.
Please help. Sorry for posting in the wrong area also in the beginning.
Charlie
I'm screwed
Now when I turn my phone on, it says Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again?
doing better now
Pretty sure I got it going finally. I changed cords and then changed ports on my computer and it finally did go back to stock without an error. I'm currently back on Lollipop and rooted so now is the fun of reinstalling contact info and anything else. So far I have not rebooted but it was not showing the recovery booting option when it did reboot. Hoping my notifications work properly now also!
Thanks!!!
Charlie

[Q] ANNOYING S4!! Help needed

Ok guys, here's the deal. i bought a secondhand s4 which was advertised as a google edition. it has a couple of annoying issues, first i noticed it switching itself off and on. the worst problem with it is that when my battery goes reeeally dead it just bootloops when i have recharged. the only way i can get it back on is to start it in recovery mode (which is clockworkmod v6.0.4.4) then do a factory wipe. so yeah thats a major pain. the s4 itself is a red model and behind the battery it says its a gt-19505, however in the settings on the phone it says its a gt-19505g.
my goal is to install an official firmware if possible that i may be able to update easily, the worry that i have is that i dont know if it would then accept my network as although it appears to run google edition custom firmware it may not once i install something official on it. this may be a nooby statement i know but a noob i am lol.
if its at all possible could i keep the cwm recovery?
and if its any help when i load the other boot loader thingy (with the green android on it) in the top left it says gt-19505, im just sayin cus im sure its vital which ever this phone actually is.
here are as many details as i can give but please ask if im missing anything
ANDROID VERSION 4.4.2
KERNEL VERSION 3.4.0-faux123-KK44-GE-Custom
[email protected]omain #20
Sun Dec 1 02:30:28 CST 2013
BASEBAND VERSION 19505XXUFNA1
BUILD NUMBER KOT49H.S001.131204
also upon booting in the top left it says "kernel is not seandroid enforcing
set warranty bit:kernel"
THANKS FOR YOUR TIME And please tell me where to start as i tried updating it via kies to fix it but it just wont connect, i assume due to custom firmware.
The Google Play Edition S4 devices didn't come in any color but white. Therefore, this is an I9505 with a custom ROM on it. The download mode screen reading GT-I9505 confirmed it.
Since this is an I9505 and not an I9505G, the main question is whether this device will work with your SIM card. For that, simply insert your SIM card and boot the device. If you get signal, you're good. Otherwise you'll have to unlock the device, either by purchasing an unlock code from one of the sites that sells them, or by trying the unlock methods available on the forums.
This will also help answer the question of which stock ROM you can install on the device. If the S4 doesn't prompt you to unlock the device, then you can install one of the unbranded S4 ROMs available on sammobile.com. After that, you can put the recovery of your choice on the S4, though I recommend TWRP over the other options.
Thanks for your help. I'm a little confused though, at the moment with this custom google edition ROM it does take my sim, in fact I bet it takes any sim, I heard that was a feature of google play devices. What I meant was after I install the stock ROM will it then not take my sim. So if it has already been unlocked How would I know which ROM to install? As I now know its not a google edition, is it possible to install an official google edition ROM? Do i use this download mode, Odin, or cwm to install a firmware. I'm just not sure what my starting point is. I don't wanna follow someone's guide yet to installing something just in case I'm jumping the gun and need to uninstall this custom ROM somehow.
Sorry for asking questions that I'm sure seem dumb I'm really just trying to learn at the moment I'm green as they come with android. BTW thanks for your suggestions so far, you def seem like you know what you're talking about, cheers
Google Play devices are carrier unlocked, but this is not a Google Play Edition S4. Therefore the device was carrier unlocked at some point in its past. The unknown here is how the original owner unlocked the device. If he or she used the unlocking methods found on XDA there is a chance the lock will be lost when installing a stock ROM.
If the S4 is unlocked, you aren't restricted to a particular region and can install any I9505 ROM using Odin, though I recommend the carrier unbranded ROMs. You cannot install a stock Google Play Edition ROM on the device as the model number of a GPE device is not the same as the device you have. However, you're already rooted and have a custom recovery installed. In I9505 Development here on XDA there is a Google Play Edition ROM that can be installed on your device. Download it to your S4, wipe everything in recovery, then flash the ROM's flashable zip in recovery. I've used said ROM and it works quite well.
OK I have found the 5.0.1 ge ROM , but in there it says I must use latest recovery or whatever plus it recommended one different to mine, is it safe to install using my version of cwm or do I need to learn how to change it??
Deleted by user
TWRP is recommended as there are people who are still maintaining it, unlike Clockworkmod and Philz. While you probably can get the ROM installed using the version of Clockworkmod you have, learning how to change recoveries is useful.
OK thank you for all your help my friend, I will now find out how to do this, I'm sure there is a section on this somewhere, BTW I think you are right about my device being rooted, but I wanted to check and I followed a guide and used super su but apparently its not rooted so I guess something must've gone wrong. Bit scary if I try to change my recovery or my firmware and this causes a brick hmmmmm
It's virtually impossible to brick the S4, especially as the recovery is flashed through Odin.
Phew that's a relief. Thanks man.... Well I'm gonna just risk using cwm for now as I'm new to this........ Thanks a whole lot for your time I really mean that.
KlLLFRENZY said:
Phew that's a relief. Thanks man.... Well I'm gonna just risk using cwm for now as I'm new to this........ Thanks a whole lot for your time I really mean that.
Click to expand...
Click to collapse
Use TWRP. CMW is outdated.
Lennyz1988 said:
Use TWRP. CMW is outdated.
Click to expand...
Click to collapse
I want to, I really do but I'm struggling here. Before I wrote that last comment I tried to find a guide on this forum for swapping to twrp, but couldn't and didn't wanna bug this guy as he had helped enough. Anyway I went to the place he told me and have hit another wall anyway because I don't know how to use the firmware the relevant kernel or the git. My life is so busy and I'm getting about an hour on this subject a day and its gonna take forever lol
If you can help me on my way even a little its much appreciated, I would like to use twrp and the 5.0.1 ge plus the right kernel of course
KlLLFRENZY said:
I want to, I really do but I'm struggling here. Before I wrote that last comment I tried to find a guide on this forum for swapping to twrp, but couldn't and didn't wanna bug this guy as he had helped enough. Anyway I went to the place he told me and have hit another wall anyway because I don't know how to use the firmware the relevant kernel or the git. My life is so busy and I'm getting about an hour on this subject a day and its gonna take forever lol
If you can help me on my way even a little its much appreciated, I would like to use twrp and the 5.0.1 ge plus the right kernel of course
Click to expand...
Click to collapse
https://twrp.me/devices/samsunggalaxys4internationalqualcomm.html
Follow the Odin guide. It's excactly the same when you flashed CWM.
@Lennyz1988: The S4 was bought secondhand and already had CWM on it from the original owner.
@killfrenzy: Follow the guide Lenny mentioned, but don't worry about the second paragraph. Our device isn't one of those that restores the original recovery on boot.
ok will do, i just tried the app install method but as i suspected, it said root is required for this app and promptly exited so i shall do the odin method, i heard that some people remove root or it could be that it was done wrong. also after reading a few posts here and there i found out that someone had similar issues with their phone random re-booting and they had custom ge with the wrong kernel so it seems once im done my issues should be history if i learn how to install fw + kernel, after this twrp thing i will be one step closer for sure. i also know ppl slate lollipop but once im all done with this im sure i will have picked up enough terminology to install cfw's to my hearts content. hooray for forums and people like you, sounds like im kissin ass but its just gratitude
so using the twrp install guide i gotta install using the odin method i have now got 3.07 odin but this is the next step.........
Odin Install Method (No Root Required):
You will need to download and install Odin on your PC. Once you have Odin installed, download the proper .tar file for your device from the download link above. Power off your device. Turn on your device using the proper key combo to get into download mode and attach the device to your computer via a USB cable. Use the PDA tab or button to browse to and select the tar file that you downloaded and flash the device.
lololol nothins ever simple i see the list of tar files in the link above but no mention at all as to which is the proper .tar for my device, i guess they assume the guide is for people who have done it before. more research tomorrow maybe i gotta be up early ugh
Lennyz1988 said:
https://twrp.me/devices/samsunggalaxys4internationalqualcomm.html
Follow the Odin guide. It's excactly the same when you flashed CWM.
Click to expand...
Click to collapse
Think you misunderstood, I have flashed nothing yet I got it like this. I'm completely green
Don't suppose anybody knows which is the tar file for my device?? S4gt-19505
OK now I get it, the list of tars in that section are all the same just newer builds of the same version. Seems obvious if you have done this before, but I wasn't to know that and cannot assume things. I'm also gonna guess and say Lenny thinks my s4 needs this particular version for an international, am I right?? Anyway it would've made a lot of sense but how does he know. I have no idea what this phone was I have never owned it new.
Different devices have different codes. For example, jfltexx is the I9505. A T-Mobile S4 would be jfltetmo, and so on.The link Lenny provided is for the I9505. Download the 2.8.6.0 version as its the latest.
As to how you were supposed to know, having never owned one, you weren't. There are tutorials in the General forum though that can help.

Help flashing and rooting Chinese S5 SM-G9006V

Ok guys, I'm really confused. I got this phone from a friend and the backstory was that it was once rooted and running a custom rom with google play apps, but someone did a hard reset or something and it went back to stock, which is hard to believe, but that's what they're telling me. If the info is correct, that means someone successfully flashed it at some point.
I found this guide https://www.lineageosroms.org/forums/forum/samsung/galaxy-s5-china-sm-g9006v-sm-g9008v-kltechn/ and got stuck right away. I can't get TWRP to work. Odin says it's done, but all I get is the stock recovery.
I found multiple threads about this phone, but it's all very confusing to say the least and I don't know where to begin with. I hope there's someone here using it who can give me some pointers as to how I can flash this thing.
Thanks in advance.
EUREKA! I've done it. All i had to do is uncheck the auto reboot option and use the key combination for entering recovery while still in the download mode. That got me to TWRP and I was able to successfully flash the rom and gapps.
Hope that info is useful to someone else.

Categories

Resources