Related
I want to flash an Aussie ROM on my HK 32GB n9005. I've been doing some reading and what I think I need to do is as follows...
ghibli3's thread at http://forum.xda-developers.com/showthread.php?t=2550823 specifically addresses this issue and thanks to those contributing there and elsewhere.
Now to check I understand what they are saying before I brick my phone.
I have these:
CSB_signed_HLTE_EUR_OPEN_32G_0718.pit
CSB_signed_HLTE_EUR_OPEN_32G_0805.pit
ghibli3-N9005.pit
ratcom-N9005.pit
I also used ghibli3's N9005-SaveMyPit from http://forum.xda-developers.com/attachment.php?attachmentid=2426123&d=1385903491 to get a copy of my current pit.
I have my original HK MI7 stock, a HK stock MK2 (used to root my phone originally using RDLV) and both an MI7 and MJ7 Aussie ROMs.
So... here is what I think I need to do... Please let me know if this is correct or tell me how to do it better.
Using Odin and with phone in DL mode, USB Debugging on, Samsung drivers and ADB setup on PC...
1. Load a PIT file in [PIT] in Odin and tick [Re-Partition] then [Start]
(1st question, do I reboot the phone or just go to the next step?)
2. Follow RDLV steps to flash the Aussie MJ7 to root the phone.
(2nd question, should I drop back to the MI7 version for the root operation? I don't think it is needed as when I rooted my phone with HK version, I had HK MI7 on the phone and used HK MK2 to root it)
(3rd question, I have Kies 3 on my PC - should I uninstall it before doing any of this or might it be helpful to have it still installed?)
OK, so no comments so far... let's try a slightly different approach.
(4th question, Can I load the PIT into Odin, tick [Re-Partition] and add in the VEGA version of the AP (from RDLV) and then flash them as one?
Journyman16 said:
OK, so no comments so far... let's try a slightly different approach.
(4th question, Can I load the PIT into Odin, tick [Re-Partition] and add in the VEGA version of the AP (from RDLV) and then flash them as one?
Click to expand...
Click to collapse
For using PIT file, you need to add the PIT to Odin when you flash so it'll repartition as it's flashing. However, don't take that as a solid cause I am not 100% sure myself as I haven't messed with PIT files (yet) - but from what I have read that is how it is done. - Have a scan through the HK bricked (solved) threads to be doubley sure cause yeah, it's easy to end up with a brick
Thanks for that. Kinda what I was planning to do but I'm not sure if I do the PIT flash first then do the rest or if I do it all as one process. I'll check out that thread... been looking anywhere I could find a PIT reference.
Well, that was fun... not.
I tried the PIT files with NAND erase all, re-partition f. reset time and Auto reboot all ticked - it failed - I got a systemconnection error. I tried again with each of the PITs listed above except ratcom's - his is from an MJ7 build and I was unsure if that would trip Knox or not.
2 hours pass, with me looking all around XDA and trying a variety of things. Incidentally I think maybe the systemconnect thing might be related to not restarting the phone to get the error screen. It seems Odin can do things when that screen is on that it can't do in plain Download mode. At least, on mine, the eventual fix worked only AFTER I had the error screen (shows the hone pic and a PC pic)
I didn't try flashing CWM. Nor doing anything that might add an MJ7 or KK bootloader. If I trip Knox I want it to be by my choice, not because I can't fix something.
But clearly I am doing something wrong in trying to repartition my phone - none of the PIT flashes worked. None of the flash ROM's worked. I looked around for a MJ3 or less ROM with the 4 files - figured I could get that I could try using a PIT for the right CSC and those files and solve both issues at once.
I tried my MK1 HK Vega image and no go. So I sat and thought it through and realised that last time I had problems I had the error screen NOT download mode so I rebooted the phone and Voila! up popped the error screen. Odin promptly flashed my HK MK1 version and now I am restoring my apps from the extSDcard. Got a bit of setup work to do but it's up and running again.
But I will have to trip Knox now - I'm sick of not having a Nandroid backup that could just restore everything where it was instead of me having to manually put things back as they were.
Any ideas as to what I did wrong?
Journyman16 said:
Well, that was fun... not.
I tried the PIT files with NAND erase all, re-partition f. reset time and Auto reboot all ticked - it failed - I got a systemconnection error. I tried again with each of the PITs listed above except ratcom's - his is from an MJ7 build and I was unsure if that would trip Knox or not.
2 hours pass, with me looking all around XDA and trying a variety of things. Incidentally I think maybe the systemconnect thing might be related to not restarting the phone to get the error screen. It seems Odin can do things when that screen is on that it can't do in plain Download mode. At least, on mine, the eventual fix worked only AFTER I had the error screen (shows the hone pic and a PC pic)
I didn't try flashing CWM. Nor doing anything that might add an MJ7 or KK bootloader. If I trip Knox I want it to be by my choice, not because I can't fix something.
But clearly I am doing something wrong in trying to repartition my phone - none of the PIT flashes worked. None of the flash ROM's worked. I looked around for a MJ3 or less ROM with the 4 files - figured I could get that I could try using a PIT for the right CSC and those files and solve both issues at once.
I tried my MK1 HK Vega image and no go. So I sat and thought it through and realised that last time I had problems I had the error screen NOT download mode so I rebooted the phone and Voila! up popped the error screen. Odin promptly flashed my HK MK1 version and now I am restoring my apps from the extSDcard. Got a bit of setup work to do but it's up and running again.
But I will have to trip Knox now - I'm sick of not having a Nandroid backup that could just restore everything where it was instead of me having to manually put things back as they were.
Any ideas as to what I did wrong?
Click to expand...
Click to collapse
2nd link in my signature.
Follow it to step 6. Then flash whatever ROM you want. Make sure your phone is 32 gigs or more. Won't work on 16 gb version.
So this gets a bit strange now... I downloaded Phone Info from Play Store and ran it. I did that because I noticed I was having Wifi issues - it was working but kept thinking it was off - I'd click it to turn it on and the button wouldn't go green, but I had signal in the Notification bar. Going to Recovery to clear cache showed it was now applying CSC-code as BTU instead of TGY, so SOMETHING worked when I was doing the PITs.
So, Phone Info shows my Region Code as BTU, my CSC country as UK/IRE and my CSC Country ISO as GBBut I have a mix of ROM info:
Bootloader: ZHUBMI7
Baseband: ZHUDMJ9
PDA: XXUDMK2
CSC: OXADMK2
So, PDA and CSC are from a UK MK2 I tried to use early on and failed with, while BL and BB are from the original HK MI7 (BL) and the HK MK1 I rooted with.
So my question is now, can I now flash a BTU or other normal ROM onto my phone, using the RDLV process to make sure I get root and don't trip Knox?
IIRC I think the process works up to MK2 (and certainly does to MK1 as that what I used originally) so I should be able to DL (say) XXUBMJ1 to use for the BL and use XXUDMK2 for the root process. (i.e. the same as I did using HK MI7 for the BL and HK MK1 for the root process)
3 questions:
1. Is it the PDA that determines the partition Hong Kong users have such problems with? Or is it the Bootloader?
2. Can anyone think of a reason why this would not work? (now my CSC is BTU)
3. Could I now use an Aussie ROM to run the RDLV process?
FeralFire said:
2nd link in my signature.
Follow it to step 6. Then flash whatever ROM you want. Make sure your phone is 32 gigs or more. Won't work on 16 gb version.
Click to expand...
Click to collapse
Thanks for the Reply.
For now I'd prefer to stay away from KK ROMs - too many people having issues, and the prevention of returning to 4.3 is, to me, a killer until Samsung get the bugs out. Given that many people are doing OK with KK, I think it is unlikely Samsung will do much about the bugs until a larger number of people have problems and start bombarding their support lines.
Plus, on 4.3 I have a very fast phone that gives more than 2 days use even with fairly heavy use (for me) and up to 4 days for light use. Why make an irreversible change when the phone is doing well already? For me the next step is custom recovery - I don't like not having a Nandroid BU and several times now after restoring apps I find I need to fix permissions - without custom recovery that means a laborious uninstall/reinstall from Play Store, one app at a time. Pisses me off...
I find it interesting that Samsung are clearly using users such as XDA members as their testing area, while at the same time shutting down the activities we like to do. (Custom ROMs etc) I say clearly using us because otherwise there is no excuse for the regularity of leaked ROMs - Samsung pass it on to us to try and I would bet, have staff watching us to see what issues we have.
So it seems a bit counter-productive to work so hard to lock the phones so we can't play with them.
Journyman16 said:
Thanks for the Reply.
For now I'd prefer to stay away from KK ROMs - too many people having issues, and the prevention of returning to 4.3 is, to me, a killer until Samsung get the bugs out. Given that many people are doing OK with KK, I think it is unlikely Samsung will do much about the bugs until a larger number of people have problems and start bombarding their support lines.
Plus, on 4.3 I have a very fast phone that gives more than 2 days use even with fairly heavy use (for me) and up to 4 days for light use. Why make an irreversible change when the phone is doing well already? For me the next step is custom recovery - I don't like not having a Nandroid BU and several times now after restoring apps I find I need to fix permissions - without custom recovery that means a laborious uninstall/reinstall from Play Store, one app at a time. Pisses me off...
I find it interesting that Samsung are clearly using users such as XDA members as their testing area, while at the same time shutting down the activities we like to do. (Custom ROMs etc) I say clearly using us because otherwise there is no excuse for the regularity of leaked ROMs - Samsung pass it on to us to try and I would bet, have staff watching us to see what issues we have.
So it seems a bit counter-productive to work so hard to lock the phones so we can't play with them.
Click to expand...
Click to collapse
You need the international pit file in your phone. Flashing the CSC file will put that pit in your phone. It won't touch the bootloader or the system files.
FeralFire said:
You need the international pit file in your phone. Flashing the CSC file will put that pit in your phone. It won't touch the bootloader or the system files.
Click to expand...
Click to collapse
Unfortunately, PIT's don't seem to come easy. As above I have about 4 of them I tried. There seems a bit of a disconnect between what the AP/CP/CSC are and what the files in a ROM are e.g. in XXUBMH1 there's boot.img, recovery.img, system.img.ext4, userdata.img.ext4, persdata.img.ext4, persist.img.ext4 and in XXUBMI7 there's sbl1.mbn, aboot.mbn, rpm.mbn, tz.mbn, sdi.mbn, NON-HLOS.bin, boot.img, recovery.img, system.img.ext4, modem.bin, cache.img.ext4, hidden.img.ext4
While I've been around a while now, this seems to be a blank spot for me at present - how do I flash a CSC? From reading it seems some ROM.s come with 4 or 5 files, e.g. see attachment - but I haven't been able to find one yet. (the one in the pic was hosted on Hotfiles which is now defunct thanks to the Almighty USA draconian control freaks. )
Update: I think I have found a copy of it so I can try that when it finishes DL'ing.
Other than that, anyone know of where there might be another such ROM to DL? Also if I am flashing a CSC file do I flash the PIT as well (i.e. at the same time) or do the PIT first?
Which Odin options get ticked for a PIT? I tried [F. Reset Time] [Re-Partition] [Auto Reboot] [Nand Erase All] previously and it didn't seem to work. I saw a recovery type post that suggested ticking [Phone EFS Clear] but seems to me that is a tick towards Brick - and the Recovery being offered was to a KK ROM anyway.
FeralFire said:
2nd link in my signature.
Follow it to step 6. Then flash whatever ROM you want. Make sure your phone is 32 gigs or more. Won't work on 16 gb version.
Click to expand...
Click to collapse
FeralFire said:
You need the international pit file in your phone. Flashing the CSC file will put that pit in your phone. It won't touch the bootloader or the system files.
Click to expand...
Click to collapse
I just looked at your post again - I realise I might have a wrong idea. Although the leaked ROM is KK, I was assuming flashing the CSC would upgrade my phone - is that the case or can I use your 6 steps just to change my PIT and then do the 4.3 RDLV process to have a root 4.3 phone?
Downloading it now - started with the torrent but that's running slow; I will let it run to completion to maybe help some others get it faster but I've got the Storage Cow one running as well. We'll see which one arrives first Either way I'll leave it seeding.
Journyman16 said:
I just looked at your post again - I realise I might have a wrong idea. Although the leaked ROM is KK, I was assuming flashing the CSC would upgrade my phone - is that the case or can I use your 6 steps just to change my PIT and then do the 4.3 RDLV process to have a root 4.3 phone?
Downloading it now - started with the torrent but that's running slow; I will let it run to completion to maybe help some others get it faster but I've got the Storage Cow one running as well. We'll see which one arrives first Either way I'll leave it seeding.
Click to expand...
Click to collapse
Yeah, you should be able to.
I tried flashing the MK2 ROM after flashing that CSC. It worked perfectly. But then I upgraded to kitkat. So I can't test JB stuff anymore.
FeralFire said:
Yeah, you should be able to.
I tried flashing the MK2 ROM after flashing that CSC. It worked perfectly. But then I upgraded to kitkat. So I can't test JB stuff anymore.
Click to expand...
Click to collapse
Well, it let me flash the vega BTU MK2 ROM but now there's a wifi problem. Still waiting for cygwin to download so I can RDLV on the XSA ROM. There seems to be some kind of conflict between BTU and Australian settings. Says to turn on wireless and actually finds my SSID's but then doesn't connect properly. le sigh...
Well it's been coming up to 24 hours with no phone but I seem to have found my way.
The problem seems to have been a mismatch between BL, CSC and PIT. In trying to get off the Hong Kong set up I wound up with a ZHU BL, BTU CSC and XSA CP and AP. It worked but I had no wifi. tried a few things to get it working and in trying to flash an XSA CSC (I think it was XSA) I got the Knox bit change. With no wifi I thought maybe the problem was the BUT-based CP needed changing. In trying to fix that, somehow I triggered Knox
I tried DL & Install of Omega 6 (it's a 4.3 - not ready to go KK yet) but although it completed nicely (so many ROM's got hidden or system errors in Odin) the phone didn't start. I tried installing Philz so I could run things from the extSDcard but an XSA wouldn't work nor would anything I had below MJ7. Last Phone Info view I had I still had a ZHU CP, even though AP and CSC were XSA-based.
Finally I got the MJ7 ROM from http://forum.xda-developers.com/sho...9005xxudmj7-pre-rooted-knox-free-odex-bl-free and it did the trick.
It's been a learning experience but I'd be happier if I knew for sure both what triggered the Knox bit (I was being very careful about it) and why some of the other ROM installs simply didn't work.
Resurrecting this one because I'm looking for info on flashing my 32G HK Note 3, but it came with KK pre-installed. So I'm not sure what differences I have to be aware of. Any tips?
For whoever still experiences issues with HK 32GB n9005 devices, After wasting half a day on that crap, i was able to flash N9005ZSUGOK2_N9005OZSGOK2_TGY from sammobile coupled with the PIT attached.
sm-n900
sm-900 and pit
Hey there people from XDA Forums,
I kind of figure I messed my S4 (I9505) up. I tried to flash a DBT-firmware (branding free for Germany) on a phone I got from Switzerland including a netlock. After Odin started I got a write error and now the phone tells me there was an issue please ask Kies about recovery mode. But Kies doesn't recognice my Phone at all. Is there any chance i can get a new working firmware onto it?
greetings
SirHanni said:
Hey there people from XDA Forums,
I kind of figure I messed my S4 (I9505) up. I tried to flash a DBT-firmware (branding free for Germany) on a phone I got from Switzerland including a netlock. After Odin started I got a write error and now the phone tells me there was an issue please ask Kies about recovery mode. But Kies doesn't recognice my Phone at all. Is there any chance i can get a new working firmware onto it?
greetings
Click to expand...
Click to collapse
Hi mate
This is an extract from this thread
http://forum.xda-developers.com/showthread.php?t=2265477
Odin troubleshooting: If Odin accidentally gives you "fail" try the following:
- Repeat procedure.
- Make sure that all actions of Kies are disabled from task manager.
- Change usb port.
- Try another usb cable (make sure it is the original).
- Try another Odin version.
- Uninstall and re-install driver.
- Use pit file.
- Try another computer.
Flashing firmware from other country should not be a problem , download file again
Where do I find a correct pit file? When flashing PIT is it always nessecary to check repartition in odin?
SirHanni said:
Where do I find a correct pit file? When flashing PIT is it always nessecary to check repartition in odin?
Click to expand...
Click to collapse
Hi
In your case it would be :
File Type: zip I9505_pit file.zip - [Click for QR Code] (1.2 KB, 43344 views)
Is on the thread i posted before , you only check repartition when you use a PIT file , any other case you do not
finally I managed to flash a new recovery and where able to restart the phone. As it seems the problem was my Computer. through the old notebook from my wife it went quite flawless. Now i am back to my original problems. I am on a branded rom with a sim lock and dont like both of it
will it work to just flash the complete firmware from my region? will it overwrite the netlock or where is it located?
Thanks for your help so far
SirHanni said:
finally I managed to flash a new recovery and where able to restart the phone. As it seems the problem was my Computer. through the old notebook from my wife it went quite flawless. Now i am back to my original problems. I am on a branded rom with a sim lock and dont like both of it
will it work to just flash the complete firmware from my region? will it overwrite the netlock or where is it located?
Thanks for your help so far
Click to expand...
Click to collapse
Hi,
Glad you manage it to work.
Flashing a new firmware will not network unlock you phone , use to be possible to do it using this guide:
http://forum.xda-developers.com/showthread.php?t=2282683
not anymore as far as i know , you will need an unlock code.
yeah, tried this one allready, but after key input I dont get a new menu. I guess this method is not working for newer austrian firmwares
SirHanni said:
yeah, tried this one allready, but after key input I dont get a new menu. I guess this method is not working for newer austrian firmwares
Click to expand...
Click to collapse
No, i think the only way is with a unlock key..........
got myself a key and everything works fine now! thanks a lot for the help and inspiration.
SirHanni said:
got myself a key and everything works fine now! thanks a lot for the help and inspiration.
Click to expand...
Click to collapse
Any time mate..that is why we are here for
I flashed a rom and it wasn't working , I could boot but screen was black . I flashed another rom and pulled a cable by accident.I think my phone is soft bricked. Kies can't recognize it, I can only boot into Download mode. My phone doesn't charge at wall outlet. Rom i used was stock firmware for galaxy s4 (5.0.1) , my model is GT-I9505 (4g version). When i go into odin mode to flash a new rom it fails "Complete(write) operation failed. Please help me!
try flashing with .pit file and tick re-partition.
.pit file is somewhere here on forum - hard to search on mobile.
it is either that or try different cable / USB port / computer
Sent from my TF300T using XDA Free mobile app
th3cr0w said:
try flashing with .pit file and tick re-partition.
.pit file is somewhere here on forum - hard to search on mobile.
it is either that or try different cable / USB port / computer
Sent from my TF300T using XDA Free mobile app
Click to expand...
Click to collapse
I tried that pit file can be extracted using heimdall, but odin says complete (write) operation failed like it has no access.
https://www.youtube.com/watch?v=Th2Jy9QXhxo
Vokrava said:
I flashed a rom and it wasn't working , I could boot but screen was black . I flashed another rom and pulled a cable by accident.I think my phone is soft bricked. Kies can't recognize it, I can only boot into Download mode. My phone doesn't charge at wall outlet. Rom i used was stock firmware for galaxy s4 (5.0.1) , my model is GT-I9505 (4g version). When i go into odin mode to flash a new rom it fails "Complete(write) operation failed. Please help me!
Click to expand...
Click to collapse
Just let Kies repair it,you have to enter the model and serial nr witch is under the battery.
In Kies go to help or something(in Dutch it's Hulpmiddelen ) then select in drop down Firmware ugrade and inisialate ,then enter model and serial nr
Put phone in download mode and go. The firmware will be downloaded and installed automaticly
Sorry for my bad English
I think Kies doesn't work on rooted phones that is why it can't connect?
@Vokrava: You'd be correct. While I posted the link to the video already, you should be able to resolve this by flashing your firmware via Odin. Just be certain to put the firmware in the Bootloader/BL section of Odin, rather than the PDA/AP section.
Odin : Complete (Write) operation failed
Download mode : SW REV. CHECK FAIL : fused : 4 , Binary : 2
Who is your service provider, and what country is yours?
I got the phone from my friend , I don't know where did he buy it. My provider is mt:s , country is Serbia
Having gotten the phone from a friend changes things. Find out where he got it from and what carrier it was originally using.
Someone told me you can install firmware from any country. I will find that out in 2-3 days or sooner I only remember I had some vodafone bloatware on it. Thanks for helping me I hope we will solve this.
If the phone is unlocked you can install any firmware you wish. However, this particular error seems to be one where you need the original firmware. For example, my I9505 was originally an O2 UK phone, but it's been unlocked. If I encountered this issue I may not be able to use the BTU firmware I have on my hard drive. I'd have to go to sammobile and download O2 firmware.
Ah ok I had cyanogen mod on it before.
Any other way to find out while I wait ?
Not unless you can decipher the IMEI. The carrier the phone was intended for is embedded in it.
It came from Europe (Vodafone) , he doesn't remember the country. I think it is Italy. What do you think ?
Try this firmware.
Patched it with spanish rom , everything is working! Thanks for everything have a nice week!
Store that ROM on your hard drive in case you need it in the future.
I got a bricked Samsung Galaxy Note 4 (910F) vodafone branded.
it's totally broken I can't start it, can't go into recovery (the hardware buttons are OK).
I can only go into download mode.
tried flashing everything with odin back to stock. followed many different instructions and now I'm lost.
can someone tell me what exact files I need?
I think I have the right firmware downloaded BUT what about the bootloader? on sammobile under germany-vodafone there are so many different versions which one shall I choose?
AND: Do I need CSC? if so which one and where to find? Couldn't find it on sammobile.
And am I right with putting the bootloader under BL, the firmware under AP, the CP (whatever this is) under CP, the csc under csc?
repartition unchecked as I read somewhere.
I still don't understand what this "pit" file is for and I'm not sure if I have the right one.. never had a phone with sooo many different firmware files..
I'm used to flash via fastboot "recovery.img, boot.img, system.img" odin is a new thing for me
HELP PLEASEEE :'(
the reactivation lock is on.
nekrosmsk said:
I got a bricked Samsung Galaxy Note 4 (910F) vodafone branded.
it's totally broken I can't start it, can't go into recovery (the hardware buttons are OK).
I can only go into download mode.
tried flashing everything with odin back to stock. followed many different instructions and now I'm lost.
can someone tell me what exact files I need?
I think I have the right firmware downloaded BUT what about the bootloader? on sammobile under germany-vodafone there are so many different versions which one shall I choose?
AND: Do I need CSC? if so which one and where to find? Couldn't find it on sammobile.
And am I right with putting the bootloader under BL, the firmware under AP, the CP (whatever this is) under CP, the csc under csc?
repartition unchecked as I read somewhere.
I still don't understand what this "pit" file is for and I'm not sure if I have the right one.. never had a phone with sooo many different firmware files..
I'm used to flash via fastboot "recovery.img, boot.img, system.img" odin is a new thing for me
HELP PLEASEEE :'(
the reactivation lock is on.
Click to expand...
Click to collapse
The note 4 firmware is usually only 1 file that contains all you need. It contains the bootloader and CSC that you pick during download. Just pick the CSC for your country.
This is unless you get a 4 file repair firmware, which contains separate bootloader, system, and CSC files.
The pit file is only needed to repartition your device.
But with all off that aside, you state that your activation lock is activated. These means the phone was password protected.
If you tell me your country, I can at least point you to the correct firmware. So at least you'll know you got the correct one.
But as far as the activation lock, I can't help with that. "Google"
Edit. I now see you mentioned Germany Voda.
So here's the most current firmware for your device.
https://fws03.updato.com/GALAXYNOTE4/SM-N910F/TCL/SM-N910F_1_20171228192640_l5rw6mqv67.zip
Download and unzip.
Then if it's just 1 file that's .md5 then you put it in AP slot.
If it's 4 files put them in appropriate slots.
aaron74 said:
The note 4 firmware is usually only 1 file that contains all you need. It contains the bootloader and CSC that you pick during download. Just pick the CSC for your country.
This is unless you get a 4 file repair firmware, which contains separate bootloader, system, and CSC files.
The pit file is only needed to repartition your device.
But with all off that aside, you state that your activation lock is activated. These means the phone was password protected.
If you tell me your country, I can at least point you to the correct firmware. So at least you'll know you got the correct one.
But as far as the activation lock, I can't help with that. "Google"
Edit. I now see you mentioned Germany Voda.
So here's the most current firmware for your device.
https://fws03.updato.com/GALAXYNOTE4/SM-N910F/TCL/SM-N910F_1_20171228192640_l5rw6mqv67.zip
Download and unzip.
Then if it's just 1 file that's .md5 then you put it in AP slot.
If it's 4 files put them in appropriate slots.
Click to expand...
Click to collapse
This reactivation lock doesn't matter I found a solution how to bypass it when the phone is set up running android.
my question is, is it possible to flash firmware to the note4 at all with reactivation lock on? Or is that just an android thingy?
And yes please that would be nice if you show me the right firmware.
My model:
N910F GSMH
I believe it is vodafone branded because when it once worked it showed a vodafone logo while starting up.
my country is Germany.
I hope thats enough info :/
nekrosmsk said:
This reactivation lock doesn't matter I found a solution how to bypass it when the phone is set up running android.
my question is, is it possible to flash firmware to the note4 at all with reactivation lock on? Or is that just an android thingy?
And yes please that would be nice if you show me the right firmware.
My model:
N910F GSMH
I believe it is vodafone branded because when it once worked it showed a vodafone logo while starting up.
my country is Germany.
I hope thats enough info :/
Click to expand...
Click to collapse
I believe it should still flash with lock. If it isn't flashing something is wrong.
If you can't get Odin to flash that firmware try this and see what happens.
Download TWRP and flash it. Can you boot into recovery then? If so download a custom rom and flash it and see what happens.
TWRP: https://eu.dl.twrp.me/trlte/twrp-3.2.1-0-trlte.img.tar
Do you have Samsung drivers installed on PC? http://developer.samsung.com/common/download/check.do?actId=698
Do you have a good Odin? https://dl.sammobile.com/Odin3-v3.13.1.zip
aaron74 said:
I believe it should still flash with lock. If it isn't flashing something is wrong.
If you can't get Odin to flash that firmware try this and see what happens.
Download TWRP and flash it. Can you boot into recovery then? If so download a custom rom and flash it and see what happens.
TWRP: https://eu.dl.twrp.me/trlte/twrp-3.2.1-0-trlte.img.tar
Do you have Samsung drivers installed on PC? http://developer.samsung.com/common/download/check.do?actId=698
Do you have a good Odin? https://dl.sammobile.com/Odin3-v3.13.1.zip
Click to expand...
Click to collapse
I have the right latest samsung drivers installed yes.
I have the Odin version you just sent a link of. ( I also tried different older versions but no success).
I can't boot into recovery doesn't work. the hardware buttons are 100% working as I have to press vol+ to confirm to go into download mode.
I tried flashing TWRP and CWM both didn't work "custom recovery blocked by A/L error".
I can successfully flash firmware with Odin. It says "PASS" and then the phone reboots and is stuck on Samsung Logo. and sometimes it just shows blue text "recovery booting" but is stuck. nothing happens.
nekrosmsk said:
This reactivation lock doesn't matter I found a solution how to bypass it when the phone is set up running android.
my question is, is it possible to flash firmware to the note4 at all with reactivation lock on? Or is that just an android thingy?
And yes please that would be nice if you show me the right firmware.
My model:
N910F GSMH
I believe it is vodafone branded because when it once worked it showed a vodafone logo while starting up.
my country is Germany.
I hope thats enough info :/
Click to expand...
Click to collapse
Hey sorry the link you've sent doesn't work :/
aaron74 said:
The note 4 firmware is usually only 1 file that contains all you need. It contains the bootloader and CSC that you pick during download. Just pick the CSC for your country.
This is unless you get a 4 file repair firmware, which contains separate bootloader, system, and CSC files.
The pit file is only needed to repartition your device.
But with all off that aside, you state that your activation lock is activated. These means the phone was password protected.
If you tell me your country, I can at least point you to the correct firmware. So at least you'll know you got the correct one.
But as far as the activation lock, I can't help with that. "Google"
Edit. I now see you mentioned Germany Voda.
So here's the most current firmware for your device.
https://fws03.updato.com/GALAXYNOTE4/SM-N910F/TCL/SM-N910F_1_20171228192640_l5rw6mqv67.zip
Download and unzip.
Then if it's just 1 file that's .md5 then you put it in AP slot.
If it's 4 files put them in appropriate slots.
Click to expand...
Click to collapse
hey thanks in advance, but this link doesnt work it says "hotlinking is not cool". anyways I searched the firmware for my model number on this site and applied the "germany vodafone" filter. but there are still soo many different entries which one shall I choose? The latest date?
nekrosmsk said:
hey thanks in advance, but this link doesnt work it says "hotlinking is not cool". anyways I searched the firmware for my model number on this site and applied the "germany vodafone" filter. but there are still soo many different entries which one shall I choose? The latest date?
Click to expand...
Click to collapse
Here's webpage
https://updato.com/firmware-archive-select-model?record=58770125168D11E89F15FA163EE8F90B
After you flash, how long are you waiting for it to boot?
Sometimes it takes awhile.
aaron74 said:
Here's webpage
https://updato.com/firmware-archive-select-model?record=58770125168D11E89F15FA163EE8F90B
After you flash, how long are you waiting for it to boot?
Sometimes it takes awhile.
Click to expand...
Click to collapse
Thanks for the link I'm downloading.
After flashing odin says PASS and my note 4 reboots. then there are 2 cases which in my view appear randomly. Either it shows the samsung logo and is stuck.
OR it shows the samsung logo and a blue little text in the upper left corner saying "recovery booting" and is stuck. I waited like 5 minutes. shall I wait longer? :/ hm..I'll try
OH and sometimes the screen just goes black idk if it really turns off after getting stuck on samsung logo.
Pull the battery, leave it out for 10+ minutes
Put battery back in
Boot to download mode (Power + Vol Down + Home)
Then try (re)flashing stock ROM via odin, i would try the earliest you can find to have the best chance, you can always flash a later one if you get it running
Better range of ROMS from sammobile, i never use updato for that reason: https://www.sammobile.com/firmwares/galaxy-note4/SM-N910F/VD2/
If none of that works, then its likely you have a hardware fault ...emmc or other
stylemessiah said:
Pull the battery, leave it out for 10+ minutes
Put battery back in
Boot to download mode (Power + Vol Down + Home)
Then try (re)flashing stock ROM via odin, i would try the earliest you can find to have the best chance, you can always flash a later one if you get it running
Better range of ROMS from sammobile, i never use updato for that reason: https://www.sammobile.com/firmwares/galaxy-note4/SM-N910F/VD2/
If none of that works, then its likely you have a hardware fault ...emmc or other
Click to expand...
Click to collapse
So I tried flashing. after flashing OH WONDER it said recovery booting and then it showed this green android logo thing with a rotating icon in it "you know what I mean" but then it stopped and just turned off.. I could freak out really.. I tried flashing again. same issue. I could then press the recovery mode key combo to get into this rotating android logo screen but everytime it just freezes and turns off. yes the battery is fully charged before I started flashing this firmware now. I flashed the one u said the earliest. So Now I tried the one the other guy here showed me. didn't work either. it just gets stuck at samsung logo. I found a repair firmware for my model containing (pit, bl, ap, cp, csc and odin) I flashed all but odin fails "write error". I then tried odin v3.0.7 but then it got stuck while flashing the system image. I waited like 1 hour. nothing. tried it again. nothing it freezes on the same position. I then tried the same on the latest versions of odin v3.12.3, 3.12.7 and on 3.13.1 but it also freezes on system.img.ext4 image flashing..
nekrosmsk said:
So I tried flashing. after flashing OH WONDER it said recovery booting and then it showed this green android logo thing with a rotating icon in it "you know what I mean" but then it stopped and just turned off.. I could freak out really.. I tried flashing again. same issue. I could then press the recovery mode key combo to get into this rotating android logo screen but everytime it just freezes and turns off. yes the battery is fully charged before I started flashing this firmware now. I flashed the one u said the earliest. So Now I tried the one the other guy here showed me. didn't work either. it just gets stuck at samsung logo. I found a repair firmware for my model containing (pit, bl, ap, cp, csc and odin) I flashed all but odin fails "write error". I then tried odin v3.0.7 but then it got stuck while flashing the system image. I waited like 1 hour. nothing. tried it again. nothing it freezes on the same position. I then tried the same on the latest versions of odin v3.12.3, 3.12.7 and on 3.13.1 but it also freezes on system.img.ext4 image flashing..
Click to expand...
Click to collapse
Try the Samsung Smart Switch for PC - like this : https://www.youtube.com/watch?v=9QhJngOuLQ4&t=337s
Good luck, maybe it will work - for me it did work for the 910C.
w41ru5 said:
Try the Samsung Smart Switch for PC - like this : https://www.youtube.com/watch?v=9QhJngOuLQ4&t=337s
Good luck, maybe it will work - for me it did work for the 910C.
Click to expand...
Click to collapse
doesnt work. I tried several versions of smartswitch AND samsung kies. nothing works it always says my model is not supported. I reinstalled drivers. tried on another pc. tried another usb port. yes I'm using the original stock usb cable. model not supported. But I've also read that in other threads that the 910F model seems to be unknown by kies or smartswitch. I'm rly starting to hate samsung now. I have never ever had so many problems with flashing and so on.
nekrosmsk said:
So I tried flashing. after flashing OH WONDER it said recovery booting and then it showed this green android logo thing with a rotating icon in it "you know what I mean" but then it stopped and just turned off.. I could freak out really.. I tried flashing again. same issue. I could then press the recovery mode key combo to get into this rotating android logo screen but everytime it just freezes and turns off. yes the battery is fully charged before I started flashing this firmware now. I flashed the one u said the earliest. So Now I tried the one the other guy here showed me. didn't work either. it just gets stuck at samsung logo. I found a repair firmware for my model containing (pit, bl, ap, cp, csc and odin) I flashed all but odin fails "write error". I then tried odin v3.0.7 but then it got stuck while flashing the system image. I waited like 1 hour. nothing. tried it again. nothing it freezes on the same position. I then tried the same on the latest versions of odin v3.12.3, 3.12.7 and on 3.13.1 but it also freezes on system.img.ext4 image flashing..
Click to expand...
Click to collapse
afaik the "repair" fimeware is no better than flashing a stock ROM in one file...
its startng to sound like a hardware error, if it cant even write to the dvice theres really not many (probably any) options left.
ive purposely bricked a phone and recovered it (not recommended of course), ive never had or never saw as much effort youve put in to try and recover a phone...
stylemessiah said:
afaik the "repair" fimeware is no better than flashing a stock ROM in one file...
its startng to sound like a hardware error, if it cant even write to the dvice theres really not many (probably any) options left.
ive purposely bricked a phone and recovered it (not recommended of course), ive never had or never saw as much effort youve put in to try and recover a phone...
Click to expand...
Click to collapse
me neither.. can't believe this.. how can a phone be physically damaged by flashing? paid 70 bugs for a note 4 with a software issue.. as I often do. recovered dead phones from sony, xiaomi, wiko, asus, lg, huawei etc... adb, fastboot and u good to go. odin is killin me.. gonna sell it as bricked.
Cleared caches?
R0B3RTF1SH3R said:
Cleared caches?
Click to expand...
Click to collapse
HOW? If I can't boot into recovery mode?
Hello good people at XDA, it's been quite a while since I have had an android phone, and am currently stuck, I reset my SM-G950W ( Canadian S8 ) and I can't seem to flash stock firmware back onto it. I used a .tar.md5 to flash the current one, but can't seem to find a .tar for the stock firmware, and adding the BL/AP/CP/CSC manually from the downloaded packaged result in odin doing nothing or failing. Could really use some help with my expensive brick :3
tutchthesky7 said:
Hello good people at XDA, it's been quite a while since I have had an android phone, and am currently stuck, I reset my SM-G950W ( Canadian S8 ) and I can't seem to flash stock firmware back onto it. I used a .tar.md5 to flash the current one, but can't seem to find a .tar for the stock firmware, and adding the BL/AP/CP/CSC manually from the downloaded packaged result in odin doing nothing or failing. Could really use some help with my expensive brick :3
Click to expand...
Click to collapse
First make sure u put phone into download mode if u trying to flash something with Odin,use sammobile ,samfirm app for PC or updato.com for faster download speed and download firmware for your model ,use latest Odin 3.13.3 and flash it via Odin while your phone is in download mode
Scorpionea said:
First make sure u put phone into download mode if u trying to flash something with Odin,use sammobile ,samfirm app for PC or updato.com for faster download speed and download firmware for your model ,use latest Odin 3.13.3 and flash it via Odin while your phone is in download mode
Click to expand...
Click to collapse
That's what I've been doing
Odin seems to hang after I press start every time ( doesn't freez , just does nothing for al ong time then fails )
I'm using a G950W which is the Canadian model, but as I said every G950W FW I think I find is just not working. Tried admin mone on odin and new usb ports... I was able to flash the Factory Settings rom on there , but can't seem to get anything else
tutchthesky7 said:
That's what I've been doing
Odin seems to hang after I press start every time ( doesn't freez , just does nothing for al ong time then fails )
I'm using a G950W which is the Canadian model, but as I said every G950W FW I think I find is just not working. Tried admin mone on odin and new usb ports... I was able to flash the Factory Settings rom on there , but can't seem to get anything else
Click to expand...
Click to collapse
Is your phone recognized in Odin (blue light)? Did u installed Samsung USB drivers? Try different USB cable ect
Scorpionea said:
Is your phone recognized in Odin (blue light)? Did u installed Samsung USB drivers? Try different USB cable ect
Click to expand...
Click to collapse
Yes to all that, I think I have the issue of finding the correct firmware now though, I was able to flash a couple things to it, but nothing seems to get me back from factory binary