Hello. After I flash any custom ROM based on Android 7.1 my phone won't boot to OS. Screen is constantly showing LeEco logo and nothing happens. I use TWRP 3.1.1-0.
try just wiping, flashing rom, and gapps and see if it boots
Azgort said:
Hello. After I flash any custom ROM based on Android 7.1 my phone won't boot to OS. Screen is constantly showing LeEco logo and nothing happens. I use TWRP 3.1.1-0.
Click to expand...
Click to collapse
Go back into TWRP, wipe, by swiping should be all that you need to do. Afterwards reinstall your custom ROM and Gaps nano. Shut off phone, and then start. Sometimes it can take a few minutes to load after the initial install. BTW, I use Paranoid 7.3.1, it works great!
Sent from my LEX727 using XDA Labs
Thank you for you replies. Now my phone works as supposed. I successfully flashed Paranoid Android ROM.
Related
Hello,
I am trying to install a custom ROM, but none are working. I install it using TWRP and it boots, but it gets stuck at the splash screen for the ROM. I've tried both ParanoidAndroid and CM10.1 and its the same with both of them. It does boot when I go back to stock though. I've tried reinstalling, I've tried using both TWRP and CWM, I've even re locked and unlocked the bootloader. If you have any idea what I can do please let me know.
What steps are you taking to flash the ROM.. Are you fully wiping?
Sent from my Nexus 4 using Tapatalk 2
you need a factory reset for the first flash. you cant just install.
flamadude said:
Hello,
I am trying to install a custom ROM, but none are working. I install it using TWRP and it boots, but it gets stuck at the splash screen for the ROM. I've tried both ParanoidAndroid and CM10.1 and its the same with both of them. It does boot when I go back to stock though. I've tried reinstalling, I've tried using both TWRP and CWM, I've even re locked and unlocked the bootloader. If you have any idea what I can do please let me know.
Click to expand...
Click to collapse
Make sure you do a full wipe before flashing the rom and if your installing paranoid make sure you use the Gapps ..
Hi all,
I try to run a 6.0 based ROM, but when I first boot the phone after an install the phone reboots after half a minute. It looks like it boots normally, but after entering language and other settings (or also when skipping all) the phone reboots and the process starts over again.
I tried to install factory ROM via ADB, this doesn't give any errors while installing.
The same happens when I try another ROM like CM 13.
Only stable ROM for me is CM12, all other ROMS give reboot.
Any suggestions? Am I installing the wrong ROMs? I have a XT1562, run Squid kernel and latest TWRP.
knielen said:
Hi all,
I try to run a 6.0 based ROM, but when I first boot the phone after an install the phone reboots after half a minute. It looks like it boots normally, but after entering language and other settings (or also when skipping all) the phone reboots and the process starts over again.
I tried to install factory ROM via ADB, this doesn't give any errors while installing.
The same happens when I try another ROM like CM 13.
Only stable ROM for me is CM12, all other ROMS give reboot.
Any suggestions? Am I installing the wrong ROMs? I have a XT1562, run Squid kernel and latest TWRP.
Click to expand...
Click to collapse
You tried tesla rom. Also first just flash the rom and boot. Once it successfully boots up, go ahead with gapps.
Thanks for your answer, it indeed is caused by the Gapps package. When I install a ROM without Gapps, everything works fine. Trying to find a compatible Gapps package now.
K.khiladi said:
You tried tesla rom. Also first just flash the rom and boot. Once it successfully boots up, go ahead with gapps.
Click to expand...
Click to collapse
knielen said:
Thanks for your answer, it indeed is caused by the Gapps package. When I install a ROM without Gapps, everything works fine. Trying to find a compatible Gapps package now.
Click to expand...
Click to collapse
As far as i remember, ever since MM, it's recommended to flash both the ROM and GAPPS together.
varounmirchi said:
As far as i remember, ever since MM, it's recommended to flash both the ROM and GAPPS together.
Click to expand...
Click to collapse
Only 6.0 rom I found that works is DU with Banks Gapps, and yes, had to install them at the same time.
This rom is a battery drain and has gps fix issues for me, not sure if I stay with this rom or go back to CM 12
Sent from my du_lux using XDA-Developers mobile app
varounmirchi said:
As far as i remember, ever since MM, it's recommended to flash both the ROM and GAPPS together.
Click to expand...
Click to collapse
Nope, there's no such requirement. I have just flashed the rom first cause sometimes the Gapps cause stability issues.
Automated reply by JARVIS
Hello Every One
I Have A Problem With my Phone Samsung Galaxy S5 (SM-G900F) I was Having a resurrection remix Rom on my phone then i have booted an Official Marshmallow Rom Then it have been slow so i have flashed Rom resurrection remix Again and here is the Problem when i flashed it it flash normally when it goes to the resurrection remix Logo it doesn't open and stay showing the logo
i have restarted several times and it doesn't open so I Have tried to flash cyanogenmod Rom then it goes on the logo of the cyanogenmod Rom then the Phone Restart .
Please Help .
SOS !!
statiicz said:
Hello Every One
I Have A Problem With my Phone Samsung Galaxy S5 (SM-G900F) I was Having a resurrection remix Rom on my phone then i have booted an Official Marshmallow Rom Then it have been slow so i have flashed Rom resurrection remix Again and here is the Problem when i flashed it it flash normally when it goes to the resurrection remix Logo it doesn't open and stay showing the logo
i have restarted several times and it doesn't open so I Have tried to flash cyanogenmod Rom then it goes on the logo of the cyanogenmod Rom then the Phone Restart .
Please Help .
SOS !!
Click to expand...
Click to collapse
I am having EXACTLY the same problem here!!! It happened after I flashed stock BTU (UK unbranded) and then trying to revert back to BlissPop/CM13. Maybe the new stock boot/modem is not supported by custom ROM makers yet?
Could anyone confirm/solve this? Thanks a lot!
statiicz said:
Hello Every One
I Have A Problem With my Phone Samsung Galaxy S5 (SM-G900F) I was Having a resurrection remix Rom on my phone then i have booted an Official Marshmallow Rom Then it have been slow so i have flashed Rom resurrection remix Again and here is the Problem when i flashed it it flash normally when it goes to the resurrection remix Logo it doesn't open and stay showing the logo
i have restarted several times and it doesn't open so I Have tried to flash cyanogenmod Rom then it goes on the logo of the cyanogenmod Rom then the Phone Restart .
Please Help .
SOS !!
Click to expand...
Click to collapse
Just verifing. When flashing a new rom, you are clearing the old one out first, right?
Like wiping the cache, system, boot,ect.
Shadow Assassin said:
Just verifing. When flashing a new rom, you are clearing the old one out first, right?
Like wiping the cache, system, boot,ect.
Click to expand...
Click to collapse
(I'm #2) Did all the usual wipes. No problem with stock rom, but cannot boot after flashing any custom ROMs like CM13.
Shadow Assassin said:
Just verifing. When flashing a new rom, you are clearing the old one out first, right?
Like wiping the cache, system, boot,ect.
Click to expand...
Click to collapse
Yes I Wipe All The Data With TWRP Recovery And i Have tried with CWm Recovery And Philz touch recovery either
And the is no changes it stuck !!
spolarbear said:
(I'm #2) Did all the usual wipes. No problem with stock rom, but cannot boot after flashing any custom ROMs like CM13.
Click to expand...
Click to collapse
statiicz said:
Yes I Wipe All The Data With TWRP Recovery And i Have tried with CWm Recovery And Philz touch recovery either
And the is no changes it stuck !!
Click to expand...
Click to collapse
Sorry its taken me so long to reply back, had stuff going on. Anyways, after doing some studying and playing with my sisters G5. They seem to be very finicky with modifications, even after root and a custom recovery installed. One thing to try (because it happened on my skyrocket), is to reinstall your recoveries and do it with a computer, that how to get a stable install, if your already using a computer, then it sounds like a something from the old firmware may still be their. You may need to install the earliest stock firmware for your G5 out of the box, and root it from their, you may even need a complete stock restore then re-root and install your custom recovery. Also. I have had some roms take 20 minutes to boot, but thats the rom stabilising.
Sent from my LG-H900 using XDA-Developers mobile app
I had an issue with an update. I rooted my phone but now I cannot install any rom. It keeps going to twrp. I did the dirty santa and the stock doesnt even install...help please.
I had the same issue some time ago.U have to install a compatible rom for your device and then if it boots in twrp,power off ,manually boot in twrp by pulling out the battery and using button's combination.I don't remember whether it boots again in twrp and then the rom or directly into rom but that got me out of twrp bootloop.
Found it here and worked for me.
https://forum.xda-developers.com/v20/help/bootloop-twrp-t3573759
dudi4ek said:
I had the same issue some time ago.U have to install a compatible rom for your device and then if it boots in twrp,power off ,manually boot in twrp by pulling out the battery and using button's combination.I don't remember whether it boots again in twrp and then the rom or directly into rom but that got me out of twrp bootloop.
Found it here and worked for me.
https://forum.xda-developers.com/v20/help/bootloop-twrp-t3573759
Click to expand...
Click to collapse
Thank you so much. That article and your reply greatly helped. =)
As the title says, i can't to seen successfully boot any android pie/android 10 based rom on max pro m1.
>bootloader already unofficially unlocked.
but during erasing process, i accidentally booted into recovery from where i booted into system , where encryption started again.
>so i booted back to twrp, format data then flashed decrypt.zip
> then flashed havoc 9.0 based rom, gapps then >wipe from twrp itself.
> rom boots fine after boot logo,but after welcome screen, google loading screen comes after which screen goes blank black and finally shutdowns after few minutes.
>tried force shutdown, multiple times, data wipe,format data,decrypt.zip after mountung vendor as well.
Still same issue, just after rom boot logo finished loading, the phone just goes blank black.
what should i do ? Asked many threads,telegram groups, nobody is replying /helping, everyone is just ignoring it.
Same problem here but goes off when connected to WiFi. Please reply If anyone got a fix for this
CHGR1999 said:
Same problem here but goes off when connected to WiFi. Please reply If anyone got a fix for this
Click to expand...
Click to collapse
my problem is solved by flashing stock pie which was twrp flashable .
akhil17kr said:
my problem is solved by flashing stock pie which was twrp flashable .
Click to expand...
Click to collapse
So you don't use havoc anymore? Or did you first flash stock, update to pie, then flash havoc? I'm stuck too... Won't let me flash havoc, need to get firmware 16 or something.
Try factory reset or wipe data
i got the same issue and still can't not flash any custom rom, the same thing happen to my phone when i flash any custom rom 8 9 or 10, i changed recovery already but it didn't work