I got my PH-1 in the Sprint Lease deal. (What a deal for a high end phone!) I'm generally enjoying it, but for some reason Bluetooth gets turned off all the time. I have BT trackers and a smartwatch (Gear Fit 2), so that's quite annoying. Anyone else have this issue? I've googled around, but haven't found anything.
1) Have you tried to keep Bluetooth on, but no devices connected?
2) Try keeping Bluetooth on, but only one of the devices connected.
3) Do the same as #2, but connect the other device.
Basically just try to see which device(if it is the problem) might be causing Bluetooth in your phone to turn off. I don't have smartwatch connected to my phone, but I do use couple of Bluetooth headsets and they work fine and I haven't experienced Bluetooth disconnects.
that is odd, I have not had that happen
You are not alone. Mine is doing this too. At first I thought I was hitting the quick toggle but it isn't even there to accidentally hit. I only pair my Acura stereo and Jabra Elite Sport headphones to it, nothing else. But I used both those devices with my 6P and had no issues. I'm going to post about it in their subreddit, they seem quite active there.
I also have this problem. For no apparent reason, my bluetooth would be off maybe a few times a week. Maybe once a month, I would lose pairing to all my bluetooth devices and had to re-pair them all.
Related
I want to know if there is a feature in bluetooth so that any time I bring my phone into range of the BT device, that it will automatically reconnect, without me having to push any buttons on the phone, or device. I guess this could depend on the device and/or phone, so if someone replies "yeah, this is how my X device connects to my Y phone", then that will answer my question. Of course, this is a Vibrant forum, and I do have a Vibrant phone, so all the better if someone tells me it works on Vibrants.
I am not sure what initiates the connection, but when I start my car my Bluetooth connects automatically with my vibrant.
I have a jawbone headset That I use, if my Bluetooth is enabled, it automatically pairs with it when in range. However, if my headset is in off mode, then obviously it does not do That.
Sent from my SGH-T959 using XDA App
Hmm... then I guess it is a function of the BT device. I am using the blueant speaker phone, and I would really like it if it just automatically connects to my phone each time I get in the car. Right now I have to press a button on the speakerphone each time I get in the car to reconnect.
I've seen weirdness with bluetooth after I've paired more then one device to the phone. T-Mobile support told me the Vibrant simply doesn't support pairing to more then one device (not just active at a time, but more then one paired at all). That sounded like bunk to me, but it sure is how my phone is acting.
I've got a PLT510 headset as well as a LiquidAux stereo adaper in the car and Plantronics 903 BackBeat Headphones. Since the LiquidAux and the 903 both give Media support and the all three devices provide "phone" support the phone seems to get real confused.
Sometimes bluetooth devices auto pair and just work, but it is not uncommon for me to have to force them into pairing mode again and search for them as if they are new devices.
I am hopeful 2.2 improves the bluetooth support.
Interesting. My Blueant speaker phone is the only device with which I have paired my Vibrant, but I have had to reboot my phone a couple of times to make it connect. I would go in my car, hit the connect button on the speaker phone and the speaker phone would report "No phone found", even though the phone was turned on and less than two feet from the speaker phone. Reboot the phone and press the connect button again and what-do-you-know, it works.
I am also hoping that 2.2 gives me some BT improvements. Voice dialing will be very nice, but I hope they fix all the other BT issues that are affecting me.
FreydNot said:
I've seen weirdness with bluetooth after I've paired more then one device to the phone. T-Mobile support told me the Vibrant simply doesn't support pairing to more then one device (not just active at a time, but more then one paired at all). That sounded like bunk to me, but it sure is how my phone is acting.
I've got a PLT510 headset as well as a LiquidAux stereo adaper in the car and Plantronics 903 BackBeat Headphones. Since the LiquidAux and the 903 both give Media support and the all three devices provide "phone" support the phone seems to get real confused.
Sometimes bluetooth devices auto pair and just work, but it is not uncommon for me to have to force them into pairing mode again and search for them as if they are new devices.
I am hopeful 2.2 improves the bluetooth support.
Click to expand...
Click to collapse
I have 2 devices paired with my vibrant. My car kit and some Motorola S9HD headphones.
SLIGHTLY off topic, how do you like those headphone ( S9HD) s, looking for a good stereo set for walking and maybe even jogging
engineer14 said:
SLIGHTLY off topic, how do you like those headphone ( S9HD) s, looking for a good stereo set for walking and maybe even jogging
Click to expand...
Click to collapse
They are great. I read lots of horror stories about the original red and black S9's and sweat, but I know there are an ungodly amount of Chinese knockoffs out there and I chalk it up to that. If you buy them retail I don't think you'd have any issues.
Just got my Vibrant yesterday and I was trying to pair it with my Jawbone 1 headset but it's not being recognized by the phone, I've turned them on and off several times but nothing seems to work.
It was working perfectly on my G1 as of yesterday so I know the headset works.
Any suggestions?
I have been patrolling the forums trying to find a solution (or at least a thread similar) to my problem. I made the move from the G1 to the Vibrant in Aug. I was spoiled by it so it feels. I've grown quite custom to my Bluetooth devices being remembered by my phone, and not having re-sync them everytime i want to use them. I'm wondering if there is a fix for this, or is this apart of the Vibrant framework and i just have to get over it? Has anyone else been experiancing this?
Help
Speak now or forever hold your piece. This is a huge nerd farm and im sure we can all put our heads together.
Are you talking about pairing or connecting the device? I only have one bluetooth device with my phone, and the phone has no problem staying paired to it. I do have to reconnect it when I turn on bluetooth, but that's all.
To clarify:
I turn on bluetooth.
My headset is shown on the devices list.
I press it once and it connects.
Device is ready to use.
Once, the device didn't show in the list while BT was off, but when I enabled BT the device was displayed.
Ilmoran said:
Are you talking about pairing or connecting the device? I only have one bluetooth device with my phone, and the phone has no problem staying paired to it. I do have to reconnect it when I turn on bluetooth, but that's all.
To clarify:
I turn on bluetooth.
My headset is shown on the devices list.
I press it once and it connects.
Device is ready to use.
Once, the device didn't show in the list while BT was off, but when I enabled BT the device was displayed.
Click to expand...
Click to collapse
What i mean is, I normally have more than one BT device connected. More specifically my BT headset, and my car BT stereo. I used to be able to have both devices remembered in my device list. But now my BT Headset is the only remembered device (and sometimes, it too will disappear. Now i constantly have to re-sync my stereo. However when a re-sync is needed, i don't have to pair the devices.
On my G1, this was not an issue. So any ideas?
I have my laptop, headset, and stereo headphones paired to my phone. Haven't had any problems, they all remember fine. However, I sometimes have to disable and re-enable Bluetooth because I have a custom name for my device, and sometimes when the phone boots it forgets that it has that name and goes back to calling itself SGH-T959. I don't know if this is related... just throwing it out there.
chui101 said:
I have my laptop, headset, and stereo headphones paired to my phone. Haven't had any problems, they all remember fine. However, I sometimes have to disable and re-enable Bluetooth because I have a custom name for my device, and sometimes when the phone boots it forgets that it has that name and goes back to calling itself SGH-T959. I don't know if this is related... just throwing it out there.
Click to expand...
Click to collapse
This does help a little. Perhaps because I am still stock, I am having this issue. What ROM are you using?
McBang2023 said:
This does help a little. Perhaps because I am still stock, I am having this issue. What ROM are you using?
Click to expand...
Click to collapse
I've had the problem on stock JFD, JI6, and on Bionix with JAC Voodoo kernel.
I'm having the same problem with my car's BT system. I thought it was my car till I read ur post. What happens with me, is that the car (which should connect automatically) will say that there isn't a phone available. I will then open Bluetooth settings (on my phone) and see that there are no devices listed. After cycling the BT off then on, my car will show up again, and will connect......strange
Sent from my SGH-T959 using XDA App
lestat210 said:
I'm having the same problem with my car's BT system. I thought it was my car till I read ur post. What happens with me, is that the car (which should connect automatically) will say that there isn't a phone available. I will then open Bluetooth settings (on my phone) and see that there are no devices listed. After cycling the BT off then on, my car will show up again, and will connect......strange
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Exactly my issue. So seeing how i am not alone in the issue, does anyone know a fix or how to resolve issue? It's not a BIG problem, bnut it is annoying to have to re-sync everytime i get in my car, (or send files from my iMac to my phone).
+1 for the vibrant forgetting my bluetooth devices. I'll open my headset and I hear it say, "Ready to Pair". It's not a big deal, really-- all I have to do is turn bluetooth on, then turn it back off and all my devices repopulate. But it is an annoyance.
thecapoots said:
+1 for the vibrant forgetting my bluetooth devices. I'll open my headset and I hear it say, "Ready to Pair". It's not a big deal, really-- all I have to do is turn bluetooth on, then turn it back off and all my devices repopulate. But it is an annoyance.
Click to expand...
Click to collapse
Ive tried that a few times, but it still yields no results for me. Any ideas.
so do we have any more suggestions from the nerd farm on how to resolve the issue?
I have a Jabra Freeway in my car and Plantronics M165 in my ear. My iPhone would work with both devices at the same time. Even with the M165 on, the iPhone would connect to the Freeway when I got in the car. When the phone rang, it rang both devices and I could answer either one.
Now I’ve got the Note 3 and it seems that it will only connect to one or the other. Both devices work fine. Just not at the same time. If I get in the car with the M165 on, the Freeway just says “disconnected” repeatedly until I turn the M165 off.
I presume this is a limitation of the Note 3 bluetooth stack but just thought I would check to be sure. I read on another forum where someone said it should work with both devices but that was all that was said. Anybody actually do this with the Note 3?
From what I have found you can have 2 Bluetooth devices connected at the same time, but not performing the same function. For example, you can have your headset bluetooth set as the active bluetooth for phone functions and your car bluetooth set as the active bluetooth for media functions. If you long press each Bluetooth device within the Bluetooth settings menu on your phone, you can choose how your phone connects via bluetooth to each device.
and that is, from what I understand, the Bluetooth limitations for Android.
♢NoteIII♢
LeftyGR said:
From what I have found you can have 2 Bluetooth devices connected at the same time, but not performing the same function.
Click to expand...
Click to collapse
That's what I figured. I'll keep my fingers crossed that KitKat updates will remedy this. In the meantime I guess it's a small thing to give up in exchange for the gains.
My issue today is that my bluetooth will not pair properly and remember its configurations. My initial pairing on my phone with my car's flexsmart X3 works perfect, however when I turn off my bluetooth on the phone or turn off my car and turn it back on the phone will still see the flexsmart and it will say it is paired but I get no sound. Upon further investigating I find that in the options setting that neither the call nor music tick box is checked. If I try to tick them it will think for a few seconds and then gray out and do nothing again.
I never had a problem with my note 2 or my temp replacement evo 3d remembering these settings. All I would do with those phones was pair it once and then any time I hopped in the car I would just turn onm,y phone's bluetooth and go. Now with my note 4 I have to unpair and repair the devices each and every time which is a huge pain. Once I have initially paired the bluetooth though it will stay connected without any interruptions. Also pairing for me is really fast and only takes a minute or so. My problem is that again instead of my phone remembering the current device settings that it is paired with, it will forget to associate it with calls and data after I turn the bluetooth off and then later back on even though the phone will still remember it is paired with the car bluetooth.
I have read a little bit that this is due to samsung note 4 using a newer bluetooth standard than its predecessors. Is there anyway to circumvent this issue by maybe rolling back the bluetooth drivers or something? I even thought about creating a tasker profile to help with this but still I would have to physically press the search button on the flexsmart eachtime.
First world problems I know but it gets a tad annoying having to unpair and repair my phone each and everytime I hop in my car to go somewhere if I want to listen to my music. Any and all suggestions would be great.
Also right now I am on a sprint network rooted stock 5.0.1 if that helps any
I'm having problems during the initial pairing of any BT device. The phone finds no BT devices at all. Turning BT off/on doesn't work. Toggling airplane mode fixes the issue for the time being and allows pairing. It's only slightly annoying since once the device is paired, it connects without a problem.
Is anyone else facing this issue? The update from this week didn't fix the issue. The phone is stock.
pkadavid said:
I'm having problems during the initial pairing of any BT device. The phone finds no BT devices at all. Turning BT off/on doesn't work. Toggling airplane mode fixes the issue for the time being and allows pairing. It's only slightly annoying since once the device is paired, it connects without a problem.
Is anyone else facing this issue? The update from this week didn't fix the issue. The phone is stock.
Click to expand...
Click to collapse
No issues at all. Pairs perfectly with galaxy 2 watch, car stereo, headset and home speaker system..
Sent from my ONEPLUS 6T using XDA-Developers Legacy app
I don't have the same issue, but I can't seem to be able to pair the device with my car. It connects to both of my Bluetooth headphones just fine. The car name shows up in my Bluetooth devices list under pairing mode, but when I click it, nothing happens. Let me know if anyone else is having a similar problem.
I'm having the exact same issue with two 6Ts, one from T-Mobile and the other directly from OnePlus. Both are up to date with regards to firmware.
Its almost like the Bluetooth stack is crashing sometime after booting or cycling airplane mode because it works for a little while and then stops.
Same issue here.
Doesn't see some devices.
Constantly re-asks if I will share my contacts with my car.
My pixel 2 didn't have these issues with the same devices, so I know it's just the op6t.
Had this issue. Glad there was a work around. What a pain in the neck.
Same having BT issues where it loses the pairing and I have to repair device.
BT Connection Drop
I am having the same problem of connectivity dropping and then getting reconnected all of a sudden. Can anyone tell me how to fix this for now? Also, any planned upgrades in future for the same?
People, I need help. I can't pair my oneplus 6t with any Bluetooth device. Whenever I try to pair it says: couldn't pair with XXX because of incorrect PIN or passkey. I tried every possible solution I found on the internet (reset Bluetooth, reset phone, reset network settings, wipe cache, etc) and no luck. All Bluetooth devices are functional and I am able to connect them to my Samsung phone, but no luck with oneplus 6t. I am running oxygenOs 9.0.13 and none of my Bluetooth devices has the pin code. Please help, this is really frustrating ?