# This ROM is made for Note 7 and Note FE models!
# Flash it at your own Risk!
# Your warranty is VOID Knox flags 0x1
# I'm not responsible for damage to equipment or loss of warranty!
Click to expand...
Click to collapse
Devices Support:
Galaxy Note 7 N930F
Galaxy Note 7 N930FD
Galaxy Note 7 N930S
Galaxy Note 7 N930L
Galaxy Note 7 N930K
Galaxy Note FE N935S/L/K
About ROM
Full N8 port (apps,framework,libs etc)
Kernel 3.18.81
KERNEL FEATURES
* based purely on the latest Samsung kernel source code (DQEF)
* custom scripts with tweaks applied at boot and wakelock fixes
* init.d support
* init scripts at boot with recommended cleaning and fixes
* added a few tested and updated CPU governors (elementalx, blu_active, conservative, ondemand, interactive, performance).
default: interactive
* added a few tested and updated I/O schedulers (noop, deadline, cfq, fiops, sio, zen, bfq, row)
default: cfq with custom parameters
* added a few TCP congestion algorythms (westwood, cubic, reno, bic, dctcp, highspeed, hybla, htcp, vegas, veno, scalable, lp, yeah, illinois)
default: westwood
* full and stable f2fs support
* fixed various bugs in the Linux code, improved algorithms, filesystems, network...
* updated to the latest Linux 3.18.55 patches
* smart overclock and underclock controls for both CPU and GPU (meaning the maximum frequencies are limited by your ASV, so you can always have a stable overclock)
* voltage controls
* LED controls
* numerous performance and stability tweaks (defconfig, fstab and Makefile)
* SELinux set to Permissive by default
* enabled extra compression algorithms, filesystem and cryptography methods
* sqlite3, busybox, fstrim and other binaries are integrated in the installer
* Knox 0x0 and SafetyNet spoofed to pass
* Gentle Fair Sleepers switch added
* Fsync switch added
* and many more changes (too many to list)...
How to install the rom:
1. Now boot into TWRP by pressing home+volume up+power on while phone is turned off
2. If TWRP asks you about allowing system to be edited, swipe yes to confirm
3. In TWRP, go to wipe, format data (a keyboard will pop up now), type "yes" (this will wipe all your data, make sure to have a backup!)
4. After this, reboot recovery and start the rom installer
DOWNLOAD
https://drive.google.com/file/d/1LBJ8hPsDlAZg-J1QEm0aUXhiORv79TtC/view?usp=sharing
Donate:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you enjoy this I would be really lucky if you would hit thanks
And if you really really like it, here is a donation link
XDA:DevDB Information
Note 8 Port Note 7, ROM for the Samsung Galaxy Note 7
Contributors
LinhPhi9x94, linhphi9x94
Source Code: https://forum.xdavn.com/rom-note8-full-port-cho-galaxy-note-7-fe-n930x-n935x-android-7-1-1.t2842/
ROM OS Version: 7.x Nougat
Version Information
Status: Beta
Current Beta Version: 1.0
Created 2017-11-17
Last Updated 2017-11-24
awesome! thanks for your hard work! waiting for the download link
no link? i already donated...
No download link ??
SM-N935F cihazımdan Tapatalk kullanılarak gönderildi
Where is download link ?
If the iris scanner works here on my N930F i'll donate you for this work.
Thanks for port that rom, waiting for the official release!
(Currently running ROM FE 7.0 v3)
links ready thank you man
Great start of the week end ! [emoji3]
Downloading now.
Thanks to dev !
Envoyé de mon SM-N935L en utilisant Tapatalk
Thank you man for the link
LinhPhi9x94 said:
DOWNLOAD
https://drive.google.com/file/d/1LBJ8hPsDlAZg-J1QEm0aUXhiORv79TtC/view?usp=sharing
Last Updated 2017-11-24
Click to expand...
Click to collapse
second weekend already, at first latest note fe port version, now note8 port, i am
Very good rom. All working fine except navigation key
what is wrong with navigation bar, Am busy trying to install it please advise
forcecorn2001 said:
what is wrong with navigation bar, Am busy trying to install it please advise
Click to expand...
Click to collapse
Dont work. And light off physical key dont work
Oh yes I just finished installing it, the light is not working but the function is working it goes back and gives the multi window, hmm
it should be corrected
Anyone try with exposed ?
LinhPhi9x94 said:
ROM OS Version: 7.x Nougat
Status: Beta
Current Beta Version: 1.0
Created 2017-11-17
Last Updated 2017-11-24
Click to expand...
Click to collapse
so far:
touch buttons light doesn't work (buttons do function properly otherwise)
doesn't require password after restart (good thing?), you can unlock using finger print scanner
the phone reboots then trying to change screen resolution (stuck at 2560x1440)
no way to change power menu options? does it really need 10 options?
iris and face recognition doesn't work
at first boot it showed 3500 mah battery, now shows 3300 mah (i did replaced the old battery to note8 battery with 3300 mah capacity)
PLEASE where is the device maintenance
i cant find device maintenance
forcecorn2001 said:
PLEASE where is the device maintenance
i cant find device maintenance
Click to expand...
Click to collapse
You have the app, smart manager.
Enviado desde mi SM-N950F mediante Tapatalk
yeraygl said:
You have the app, smart manager.
Enviado desde mi SM-N950F mediante Tapatalk
Click to expand...
Click to collapse
what is smart manager
So... Here is my test report.
Bugs or problems :
- Only "LTE" indicated bot not "4G" or "4G+" like on iphone...
- lot of lags, google play crashes and SIM not detected, all at first start
- absolutely no icon on app menu, you need to activate from display option - home screen disposition
- iris sensor not working
- !!!! Email Samsung application makes smartphone reboot and crash. All network connection are lost !!!!
Works fine :
- GEAR VR works !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
- spen and apps
- no light on fonction icons (because there are no longer present on note 8 because of infinity display ???)
- Always on need to be enabled, not enabled by default
- French Keyboard
- APN and double click shortcut to open
For french friends :
- molotov TV and MyCanal crashes (tried to change build.prop to N935F but nothing changes )
Related
ElementalX Kernel
for OnePlus 3 and 3T
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ElementalX is designed for maximum stability.
It is made for people who depend on their phone every day.
Features
Easy installation and setup with Aroma installer
Wake Gestures support (sweep2wake & doubletap2wake)
Notification LED control
Sound control
Advanced color control
Sweep2sleep
Backlight dimmer
Overclock or underclock CPU
Adjust or disable vibration
FIOPS, BFQ, CFQ, deadline, noop and SIO i/o schedulers
NTFS r/w support
Option to disable fsync
performance and power optimizations
Option to disable gesture vibration
USB OTG support
Dash charge
WireGuard support
Supports MultiROM
Does not force encryption
Compatible with systemless root
Installation
1. Flash in recovery
For maximum compatibility with all ROMs, ElementalX uses your existing ramdisk.
Do NOT flash this over other custom kernels!
You should only flash ElementalX over the kernel that came with your ROM!!!
Notes
EX Kernel Manager can be used to configure settings and update or install the kernel quickly and easily.
You can also use my free app Button Mapper to configure the navigation buttons.
Google+ Community
Downloads
OxygenOS/Stock-based ROMs (Android 9)
ElementalX-OP3-5.00
OxygenOS/Stock-based ROMs (Android 8.0.0)
ElementalX-OP3-4.06
LineageOS based ROMs (Android 8.1.0)
ElementalX-OP3-4.01-los
OxygenOS/HydrogenOS/Stock-based ROMs(Android 7.1.1)
ElementalX-OP3-3.09
LineageOS based ROMs (Android 7.1.2)
ElementalX-OP3-3.19-los
OxygenOS/HydrogenOS/Stock-based ROMs(Android 7.0)
ElementalX-OP3-2.07
OxygenOS/HydrogenOS/Stock-based ROMs(Android 6.0.1)
ElementalX-OP3-0.32
CyanogenMod 13 based ROMs
ElementalX-OP3-0.39-cm
Source code
Github
_____________________________________
XDA:DevDB Information
ElementalX-OP3, Kernel for the OnePlus 3
Contributors
flar2
Source Code: https://github.com/flar2/android_kernel_oneplus_msm8996
Kernel Special Features:
Version Information
Status: Stable
Created 2016-06-24
Last Updated 2019-05-29
Changelog
0.11
-add sound control
-security update
0.10
-fix for MultiROM
0.09
-OnePlus updates (including Dash Charge)
0.08
-KCAL advanced color control (@tbalden)
-Notification light control (@Lord Boeffla)
-update installer
0.07
-enable wifi on cm-based ROMs
0.06:
-revert shut down big cluster while screen is off
0.05:
-shut down big cluster while screen is off
-enable USB OTG by default
-add support for PS3 controllers
-do not force encryption
0.04:
-add backlight dimmer
-disable stock doubletap if dt2w is disabled in app
0.03:
-fix capacitive button vibration
-add wake gestures
0.02:
-adjust or disable vibration
-sweep2sleep
0.01:
-optimize and update
-overclocking
-BFQ, SIO and FIOPS i/o scheds
-fsync option
Reserved
wow!! this is amazing...elementalX on OP3... hurray!!!
Using your kernel on Nexus 7, can't wait for more development! Welcome to the op3 train flar2!
Thank you flar for this you are the reason that i din't sold the device.As i'm a fan of your kernel from my 1st nexus device,5 then 6 and now i'm glad to see you here.
One question,does dash charge work with custom kernels?
Great to see you here now.
Wow I used to use your kernel on my Nexus 5
Great to see you here. Yeeeesss
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Thanks God !
Holy ****
Just phenomenal!
Sent from my ONEPLUS A3003 using Tapatalk
hot damn, flars here!
glad to see you here !!!!
I am a user of your kernel on my nexus 9. Very glad to see you here!
Wow, I used your kerel on the HTC M7, great to see you here.
Undervolting would be appreciated.
I got this device today too D
Will is be avaiable for aosp and cm Roms ?
Gesendet von meinem unknown mit Tapatalk
One more reason for me to buy this phone!
micr0g said:
Thank you flar for this you are the reason that i din't sold the device.As i'm a fan of your kernel from my 1st nexus device,5 then 6 and now i'm glad to see you here.
One question,does dash charge work with custom kernels?
Click to expand...
Click to collapse
If you read a bit around the 1+ forums, on the custom ROMs, or even on websites taht talk about the 1+3, you would know that no, it will not work since 1+ didn't share the kernel source. They will, however, share the binaries for the Dash charging by the end of july (proprietary stuff) and they will also share the VOOC coding for custom ROMs.
The kernel source is out man,they just didn't share the binaries.
So can someone share his charging time with ElementalX;
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
About LD
Years after the death of LiquidSmooth, Sean Hoyt (the LiquidSmooth lead dev) has returned to the ROM game with the Exynos5420 team to bring greatness to our beloved exynos5420 tablets and note 3 out of the ashes of the fallen LiquidSmooth ROM. LiquidDeathOS is super optimized for the exynos5420.
In fact right now it is so optimized that it won't even boot on non-exynos devices
LD is AOSPbased and is only for Exynos devices
(it's even more optimized than cm)
Feature List:
OMS/substratum theme engine
Advanced Reboot
Network Traffic Settings
Clock Settings
Quick Pulldown
Smart Pulldown
Hardware/Software key control
Lockscreen Control
More to come!!
What works:
Display/Brightness
Touchscreen
Audio
Wifi
Buttons/Lights
SDCard
USB Storage
Bluetooth
IR Blaster
Camera
OMS/substratum theme engine
Microphone
What doesn't work:
Home button wake
GPS
Fingerprint
RIL
Audio is quiet (Will be fixed in the next build)
Not in the list? Report below
How to install
1. Download ROM and Gapps and transfer to device
2. Boot into recovery (TWRP recommended)
3. Wipe the system, cache, data, and dalvik cache
4. Install ROM
5. Install Gapps
6. Install Root if you want
7. Reboot to system
Downloads
1/6/17 Build
Contributors
@deadman96385 @thompatry @ZakooZ @Orion116 @mosimchah @joshndroid @Andmoreagain @thermskin @javelinanddart@tincho5588 @ShevT
Device Maintainers
Deadman96385
Source code
Device Repos
Rom Source
XDA:DevDB Information
LiquidDeathOS [ROM] [official] [7.1.1] [klimtlte] [SM-T705], ROM for the Samsung Galaxy Tab S
Contributors
deadman96385
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Beta
Created 2017-01-06
Last Updated 2017-01-06
Deathly Adiutor App
Deathly Adiutor is an open-source, modified version of Kernel Adiutor made specifically for Exynos 5420 devices.
Features
Power Saving:
S-Pen Power Saving - Same as in Touchwiz, disables S-Pen detection if it's inserted in the slot
S-Pen Input Booster - Instantly increase CPU frequency when the S-Pen touches the screen
Touchscreen Input Booster - Instantly increase CPU frequency when you touch the screen
Touchkey Input Booster - Instantly increase CPU frequency when you touch the capacitive buttons
Touchscreen Glove Mode (Not all screens support this)
CPU Control:
CPU Settings reworked - Deathly adiutor back-end was cleaned up to work specifically with our CPU
CPU Thermal - Control all thermal throttling points for the CPU (make your device run colder... or even hotter)
GPU Control:
GPU Time in States - Same as CPU Time in States (Times in each frequency)
GPU Frequency Control (not yet supported on Nougat)
GPU Voltage Control (not yet supported on Nougat)
GPU Governor Control (not yet supported on Nougat)
Battery control:
Full power statistics - See current and maximum charging currents and current source of power
Unstable power source detection - Lowers current until the power source is stable
Customize charger current limits - Make your device charge faster (safe, if the charger can not supply enough current, the board will dynamically decrease the current)
Screen-On current limiter - Limit charging if screen is on (to avoid overheating)
Speakers:
Privacy mode - Disable main speaker if headphones are plugged in
Earpiece volume
Left/Right speaker volume
Speaker equalizer
Headphones:
Left/Right channel volume
Mono output mode
Headphone equalizer
App Themes:
Light theme - White and Red
Dark theme - Grey and Red
Credits
This post was written by @ZakooZ
This app is brought you by the exynos5420 developer team: @deadman96385 @thompatry @ZakooZ @Orion116 @mosimchah @joshndroid @Andmoreagain @thermskin, @javelinanddart, @tincho5588, @ShevT
Translators:
@ShevT - Russian
The following people deserve distinction for their major contribution:
@tincho5588, responsible for 80%+ of the code for the new features
@deadman96385, the main maintainer of the Deathly kernel and most of the remaining code
Downloads
The app can be found in the Play Store:
Free version (with ads): https://play.google.com/store/apps/details?id=com.exynos5420.deathlyadiutor.ads
Donator version (no ads): https://play.google.com/store/apps/details?id=com.exynos5420.deathlyadiutor.adfree
Helping the developers
You may have noticed there's 2 versions of this app, one ad-free for donators and one with ads.
You can help us by clicking ads you're interested in for the free version, or purchasing the donator version!
We will use the money generated by this app as common money for the developers of the team. It will be used to pay for our web-hosting (we own a gerrit server and a domain name, exynos5420.com). It will also be used to buy a new device if one of ours breaks.
Translating the App
You can also help us by translating the app to your language:
1. You can start by looking at the full english language file: Link
2. Then compare it to your unfinished language file. You can find it here, under values-xx/strings.xml, xx being your language abbreviation.
3. You can then fill-in the missing strings in your language file. Here's an example of what a proper update looks like.
4. Then you can submit your translation by using our gerrit. If you don't know how to use gerrit, just PM the translation to your favorite developer and he'll get it merged!
Reserved
thanks boss- I will try now.
Rooted with supersu 2.79 sr2...
it is fast as bullet!
testing more
Could you post some screenshots of ROM plz?
binhminhluc9h said:
Could you post some screenshots of ROM plz?
Click to expand...
Click to collapse
I can soon
ivanox1972 said:
thanks boss- I will try now.
Rooted with supersu 2.79 sr2...
it is fast as bullet!
testing more
Click to expand...
Click to collapse
Great! Glad to hear
And now for the inevitable question:
does this work with the t700 ??
?
T-700 has the exynos5420. So it could if the developers are willing. I would definitely be interested in running it. Here's to hoping!
Hope the dev considers T-700 too, ready to test for sure
I used it one day: things mentioned in op not work are more and less important.. i think this rom has future because it is snappy really in common usage, opening apps ..., subjectively snappiest between all aosp/ cm's. I am not gamer, or synthetic test runner.
And device stays cool in common usage unlike some other aosps...
Thanks deadman.
Is there any way to see battery level on status?
Try to implement screen modes in settings...
Themes is also good to be seen..
Thanks again for hard work
Sent from my SM-T705 using XDA-Developers Legacy app
Pls can you make it for the t800??? I love how this ROM works on the tab of my girlfriend.
Baseband is Unknown. Hopefully soon come fix
ciberworm said:
Pls can you make it for the t800??? I love how this ROM works on the tab of my girlfriend.
Click to expand...
Click to collapse
I would be great. No 7.1.1 ROM and only one 7.0 AOSP build for T800 :crying: I hope a new 7.1.1 ROM will be released for the t800 :good: launcher shortcut are so useful
this is rom is so promising i hope fixed riil use and gps also finberprint than ist perfect
Anyone tried this on T700?
Sent from my SM-T700 using Tapatalk
I installed this on my T700 this morning. It seems to work fine, but has the sim-missing icon by the clock. Had to delete the assert line from the updater-script. I'll try this for a while.
Rooting the rom
ivanox1972 said:
thanks boss- I will try now.
Rooted with supersu 2.79 sr2...
it is fast as bullet!
testing more
Click to expand...
Click to collapse
How exactly did you root? I wasn't able to do it with super su..
joaomiranda94 said:
How exactly did you root? I wasn't able to do it with super su..
Click to expand...
Click to collapse
just download and install SR2-SuperSU-v2.79-SR2-20170103215521.zip from recovery in any moment...
I'm not sure what to go with, LiquidDeathOS or lineageOS any reasons I should or shouldn't go with either would be appreciated
Sent from my SM-T700 using Tapatalk
dandocmando said:
I'm not sure what to go with, LiquidDeathOS or lineageOS any reasons I should or shouldn't go with either would be appreciated
Click to expand...
Click to collapse
At the moment liquid deathOS has a lot more bugs so LinOS should be a better and more stable option as of now.
Hello ! Today I share with you rom note fe for note 7 nougat. The great thing is that everything works stably. I have been developing it for 1 month. And will keep updating continuously for note 7.
SUPPORTED DEVICES
Galaxy Note 7 N930F
Galaxy Note 7 N930FD
Galaxy Note 7 N930S
Galaxy Note 7 N930L
Galaxy Note 7 N930K
Galaxy Note FE N935S/L/K
Rom features of Nougat:
All app and features from Galaxy Note Fan Edition
Build on N935SKSU3AQFE
KERNEL FEATURES
* based purely on the latest Samsung kernel source code (DQEF)
* custom scripts with tweaks applied at boot and wakelock fixes
* init.d support
* init scripts at boot with recommended cleaning and fixes
* added a few tested and updated CPU governors (elementalx, blu_active, conservative, ondemand, interactive, performance).
default: interactive
* added a few tested and updated I/O schedulers (noop, deadline, cfq, fiops, sio, zen, bfq, row)
default: cfq with custom parameters
* added a few TCP congestion algorythms (westwood, cubic, reno, bic, dctcp, highspeed, hybla, htcp, vegas, veno, scalable, lp, yeah, illinois)
default: westwood
* full and stable f2fs support
* fixed various bugs in the Linux code, improved algorithms, filesystems, network...
* updated to the latest Linux 3.18.55 patches
* smart overclock and underclock controls for both CPU and GPU (meaning the maximum frequencies are limited by your ASV, so you can always have a stable overclock)
* voltage controls
* LED controls
* numerous performance and stability tweaks (defconfig, fstab and Makefile)
* SELinux set to Permissive by default
* enabled extra compression algorithms, filesystem and cryptography methods
* sqlite3, busybox, fstrim and other binaries are integrated in the installer
* Knox 0x0 and SafetyNet spoofed to pass
* Gentle Fair Sleepers switch added
* Fsync switch added
* and many more changes (too many to list)...
How to install the rom:
1. Now boot into TWRP by pressing home+volume up+power on while phone is turned off
2. If TWRP asks you about allowing system to be edited, swipe yes to confirm
3. In TWRP, go to wipe, format data (a keyboard will pop up now), type "yes" (this will wipe all your data, make sure to have a backup!)
4. After this, reboot recovery and start the rom installer
DOWNLOAD UPDATE V6
GOOGLE DRIVE
Support:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you enjoy this I would be really lucky if you would hit thanks
And if you really really like it, here is a donation link
PayPal
XDA:DevDB Information
[ROM][NOUGAT] Note FE For Note 7 Fullport , ROM for the Samsung Galaxy Note 7
Contributors
LinhPhi9x94, linhphi9x94
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
ROM Firmware Required: Nougat 7.0
Version Information
Status: Beta
Created 2017-08-01
Last Updated 2017-08-15
#changlog
update version 6:
- Full Work Base N935F
update version 4:
- Base N935F Global Fix Dualsim Audio
- Added Note8 Apps Port By AlexisXDA
- Phone and Contacts
- Incall UI
- Browser
- Clock
- Calendar
- Messaging
- TouchWiz Home
- Edge Lightning
- Task Edge
- People Edge
- Air Command
- S Finder
- Samsung Themes Store
- Smart Manager
- Keyboard
- My Files
- Gallery
- Photo Editor
- Calculator
- Weather
- Live Messages
- Unified Profile
- Fingerprint Service
- Fused Location
- media/audio and fonts folders
update version 3:
- Fix USB OTG
- Fix Quick Charge
- AROMA Install ( CSC Select )
- Fix IRIS for N930S/L/K ( using cm.bin on BL N935S/L/K flash via Odin ) N930F/FD Not Support
- update base N935LKLU3AQG6
- And More ...
update version 2 :
- Fix sensor
- Fix Camera
- Fix Charge
- Fix Lag By Kernel
- Fix Wifi
- Fix Bluetooth
- Support DualSIM ( Bug Audio Incall SIM 2 )
Beta 1 : First Boot And More Bug
#changlog2
Why did you say Status:*Beta?? It's stable? I'm going to try right now thanks bro ?
very good news. downloading
esprimer said:
Why did you say Status:*Beta?? It's stable? I'm going to try right now thanks bro
Click to expand...
Click to collapse
it's beta . i developing....
snapchat working?
thanks , it worked except IRIS ,and can be rooted with superSU v2.82 SR1
LinhPhi9x94 said:
Hello ! Today I share with you rom note fe for note 7 nougat. The great thing is that everything works stably. I have been developing it for 1 month. And will keep updating continuously for note 7.
Click to expand...
Click to collapse
Thank you so much.
thank you. i installed without any wipe without problems. just stock wallpapers. s8 live display not working
Can install be run from SD card or does it require flash from pc?
csar21200 said:
thank you. i installed without any wipe without problems. just stock wallpapers. s8 live display not working
Click to expand...
Click to collapse
this is not a S8 port! the Note 7/FE has no Infinity Display so no Infinity Wallpapers for it! Samsung didn't put them in this rom. But maybe people start porting S8 or even better Note 8 roms to our Note 7. And the we get those lovely Infinity Wallpapers.
srichar3 said:
Can install be run from SD card or does it require flash from pc?
Click to expand...
Click to collapse
learn to read baby. instructions are posted in the first post. It says to use twrp like every other custom rom.
Always on Display crash closing
hi,
i installed it....working perfectly....AOD crash closing......pls give me a solution.
iris working?
Iris scanner is not working! But all things are working fine!
so far really great! AOD works like a charm on my device.
Bugs I noticed:
AppLock crashes always
USB OTG not working!
only 10 minutes of 4K recording! Hydra you could record forever.
Iris is not working for now
Remained everything is working perfectly thank u dav
One question plz for infinity display walls?
Such a great job! I'll wait for Iris working. Please Keeper in developing! Thank you so much!
Gesendet von meinem SM-N930F mit Tapatalk
@LinhPhi9x94 Thank you for your time and for your job. [emoji122][emoji122][emoji122][emoji122][emoji122]
Now, we can enjoy with this incredible port!!
Thank you very much!!!!
Enviado desde mi SM-N935L mediante Tapatalk
If you install this 7.0 can you still downgrade to 6.0? Lets say from this ROM to Hydra?
---------- Post added at 03:53 PM ---------- Previous post was at 03:49 PM ----------
Downloading now. Cant wait!!!!!!!!!!!!!!!!!!!!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
INTRODUCTION
Code:
/*
* Your Warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, dead dogs, or cats,
* but i'm very interest in thermonuclear war, so if you point the finger
* at me for messing up your device just because this kernel, I will
* send you to the mars with Nuclear Rocket. Act accordingly.
* I know this paragraph is conspiracy-included, so
* dont ask about it. Welcome.
*/
Pepsy is a custom kernel that improves battery consumptions and performances. It's based on LineageOS's kernel to ensure the best stability. It has a lot of improvements made by various legendary XDA developers. I will ever prefer quality over quantity, so do not ask for useless features. And do not forget to drink a PEPSY!
FEATURES
Compatible with android 8.x
Upstream to latest 3.18.y kernel tag from kernel.org
Synced with latest changes from LineageOS
Synced with latest changes from CodeAuroraForum
Sio, Fiops, Fifo, SioPlus, Tripndroid, VR and Zen ioscheds
Impulse governor
Boeffla's Wakelock Blocker
LCD Notifier driver
Backlight Dimmer
Dynamic Sync Control 2.1
KCAL Post Processing Control v2
Adreno Boost
Adreno idler
WireGuard
USB fast charging up to 900 mA
Disabled CRC check
Swappiness 0
Bic, Cubic, Westwood, Hstcp, Hybla, Htcp, Vegas, Reno, Scalable, Lp, Yeah and Illinois advanced TCP
Disabled various logspam of various drivers
Optimized Interactive governor
Arch Power Energy Saving
Gentle Fair Sleepers
Reworked CPU boost
Reworked msm-thermal
Slab updates
Cfq-iosched upstreams
Optimized cpu-idle
OC: CPU | GPU MSM8996 (Standard frequencies for speedbin 1)
... and much more
Please refer to GitHub for a complete features list
DOWNLOAD
Latest Pepsy Kernel
Compatible with:
MI 5
MI 5s
MI 5s Plus
MI Mix
MI Note 2
INSTALLATION
First time install:
Reboot to TWRP recovery
Flash the kernel zip
Flash Magisk (optional)
Wipe cache and dalvik (optional)
Reboot
Updating the kernel:
Reboot to TWRP recovery
Flash the kernel zip
Wipe cache and dalvik (optional)
Reboot
Coming from another kernel:
Dirty flash your ROM or flash the boot.img only
Flash the kernel zip
Flash Magisk (optional)
Wipe cache and dalvik (optional)
Reboot
THANKS TO
Please refer to GitHub
Donate HERE if you want
XDA:DevDB Information
Pepsy Kernel, Kernel for the Xiaomi Mi 5s Plus
Contributors
Psy_Man
Source Code: https://github.com/PsyMan47/Pepsy-Kernel
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v0.8
Stable Release Date: 2018-08-04
Created 2018-02-12
Last Updated 2018-08-04
Finally its here.. custom kernel for mi5+.
Thank youu
Sent from my MI 5s Plus using Tapatalk
Looking forward to lineage/aospa support [emoji21]
Anyway thanks!
Sent from my MI 5s Plus using Tapatalk
pote2639 said:
Looking forward to lineage/aospa support [emoji21]
Anyway thanks!
Sent from my MI 5s Plus using Tapatalk
Click to expand...
Click to collapse
Soon, but no eta.
Thank you for your good job.
How can i use kcal color control? I installed color control from savoca but it force closed and not works.
Jamshid27 said:
Thank you for your good job.
How can i use kcal color control? I installed color control from savoca but it force closed and not works.
Click to expand...
Click to collapse
You can manage kcal controls from Kernel adiutor or similar apps
wifi no work for other very good feelings
great work
MI 5s Plus running 7.9.21 WiFi working without a problem. Nice work!
kuto232 said:
wifi no work for other very good feelings
great work
Click to expand...
Click to collapse
Change your ROM
my apologies do not work wifi on viperOS and paranoid ....
I think that I brake
---------- Post added at 01:57 AM ---------- Previous post was at 01:45 AM ----------
Psy_Man said:
Change your ROM
Click to expand...
Click to collapse
except the wifi failure goes great so at first impression, would it be possible to correct that bug for the custom ROM?
regards
kuto232 said:
my apologies do not work wifi on viperOS and paranoid ....
I think that I brake
---------- Post added at 01:57 AM ---------- Previous post was at 01:45 AM ----------
except the wifi failure goes great so at first impression, would it be possible to correct that bug for the custom ROM?
regards
Click to expand...
Click to collapse
"Only MIUI supported for now."
Sent from my Xiaomi MI 5s Plus using XDA Labs
kuto232 said:
my apologies do not work wifi on viperOS and paranoid ....
I think that I brake
---------- Post added at 01:57 AM ---------- Previous post was at 01:45 AM ----------
except the wifi failure goes great so at first impression, would it be possible to correct that bug for the custom ROM?
regards
Click to expand...
Click to collapse
Wifi is exported as .ko module (as MIUI requires) and aosp/cm requires as internal object driver.
Um just noticed on 7.9.21 kernel auditor can't save changes on boot so "on boot" is empty meaning you have to make all changes manually after each boot. Also I noticed my phone won't go down to deep sleep. MI 5s Plus.
Correction, my phone goes down to deep sleep but for like 15seconds from a full charged battery down to 61% will get back to you once I leave the phone to settle. I know I haven't used the phone as much as the stats state.
lineage/aospa support plssss
Zeggi said:
Um just noticed on 7.9.21 kernel auditor can't save changes on boot so "on boot" is empty meaning you have to make all changes manually after each boot. Also I noticed my phone won't go down to deep sleep. MI 5s Plus.
Correction, my phone goes down to deep sleep but for like 15seconds from a full charged battery down to 61% will get back to you once I leave the phone to settle. I know I haven't used the phone as much as the stats state.
Click to expand...
Click to collapse
Give the autostart permission to kernel adiutor for applying changes at boot. Deep sleep it's perfectly working on my mi note 2. Check your battery stats with wakelock detector and see which apps are draining your battery. Also disable the gentle fair sleeper from Kernel adiutor
Just found that le pro 3 has same 821 and I found this thread with awesome profiles.
https://forum.xda-developers.com/le-pro3/how-to/advanced-interactive-governor-le-pro-3-t3533130
I'm running ex kernel manager now and with frostbite profile getting nice stats. Will share in a few days if you guys are curious.
Thanks again Psy_Man
Edit
Found this thread which is also awesome after digging for some more profiles,
https://forum.xda-developers.com/oneplus-3/how-to/advanced-interactive-governor-tweaks-t3476589
Zeggi said:
Just found that le pro 3 has same 821 and I found this thread with awesome profiles.
https://forum.xda-developers.com/le-pro3/how-to/advanced-interactive-governor-le-pro-3-t3533130
I'm running ex kernel manager now and with frostbite profile getting nice stats. Will share in a few days if you guys are curious.
Thanks again Psy_Man
Edit
Found this thread which is also awesome after digging for some more profiles,
https://forum.xda-developers.com/oneplus-3/how-to/advanced-interactive-governor-tweaks-t3476589
Click to expand...
Click to collapse
Having more options is always nice, so please do.
Don't forget to tell us what ROM you're using(!).
MI 5s plus
Sent from my MI 5s Plus using Tapatalk
I Use kernel adiutor and set screen colors but after sleep and wake up display, colors back to stock . Please give me solution .
Miui 7.9.22 developer
Mi5s plus 64g
Jdi panel
Since I installed this kernel I hear a buzz when i play something through the speaker. It's very clear at low volume. Anyone with the same problem?
[ROM][11.0] WaveOS 4.0 Rasmalai for Redmi4A/5A [OFFICIAL][ROVA] [ROLEX/RIVA]
----------------------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WaveOS 4.0 - Rasmalai
WaveOS is an android custom ROM based on AOSP, focused on delivering a perfect blend of aesthetics, functionality and performance out of the box. The version 4.X is based on Android 11. Various optimizations and enhancements have been merged from CAF and upstream AOSP to maximize performance and battery backup, and improve OS functionality. We provide a unique and beautiful user interface out-of-the-box that's inspired by OnePlus' OxygenOS, and can be tweaked to your liking. We've also added handy features and customizations that improves user experience and proves to be useful at the end of the day, rather than bloating the ROM with unwanted features and customizations that could cause stability issues. We hope you like it! #NeverBetter
Code:
/* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features
Head over to our full features list at GitHub
GApps Not included [Vanilla]
What works?
Almost everything
What's broken?
You tell me!
ROM: https://sourceforge.net/projects/wave-os/files/rasmalai-4.x/rova/
Magisk: https://github.com/topjohnwu/Magisk/releases
Gapps - Nik core recommended
INSTRUCTIONS
Reboot to recovery
Wipe data, cache and dalvik if coming from another ROM
Format data if encrypted
Flash ROM (gapps )
(optional) Flash Magisk
Reboot and voila!
Screenshots in post #2
Follow us on Twitter | Telegram
ROM and device sources: https://github.com/Wave-Project
Kernel source: https://github.com/Thagoo/platform_kernel_xiaomi_msm8917
/
Screenshots
UPDATE - WaveOS v4.1 is here!
WaveOS_rolex-R-v4.1-20210219-1822-OFFICIAL-signed.zip
Download: https://sourceforge.net/projects/wa....1-20210219-1822-OFFICIAL-signed.zip/download
Source Changelog:
https://raw.githubusercontent.com/Wave-Project/stuff/main/changelog.txt
Device Changelog:
- Build Gapps Variant
- Rebased trees
- Set TARGET_CPU_VARIANT as 'cortex-a53'
- Enable dex2oat64 usage on device
- Adress Fmradio denials (Fix Fmradio)
- Set ZRAM max_comp_stream to 4
- Misc optimizations and stability fixes
Kernel Changelog:
- Upstream to linux-v4.9.257
- Merge CAF tag LA.UM.9.6.2.r1-03800-89xx.0
- Switch to Sony TNG lowmemorykiller for better RAM management
- Switch to Utilization clamping and disable Schedtune
- Misc optimizations and stability fixes
Screenshots - attached
Cheers and #NeverBetter!
can't copy file and folder to 0/android/data or obb
Prof.HB-69 said:
can't copy file and folder to 0/android/data or obb
Click to expand...
Click to collapse
Android directory is not writable from Android 11
You need su for it
after instal this rom, battery percent always 0%. how to fix?
AnjayJr17 said:
after instal this rom, battery percent always 0%. how to fix?
Click to expand...
Click to collapse
Did you flash any other kernels? And please follow correct flashing procedure
Thago said:
Did you flash any other kernels? And please follow correct flashing procedure
Click to expand...
Click to collapse
i was follow instruction correctly. when i turn off the phone. battery percent detect 100%. but when I turn on, no detect battry
Thago said:
Did you flash any other kernels? And please follow correct flashing procedure
Click to expand...
Click to collapse
im not flash kernel, just the rom and nikgapps
And when on twrp, lcd always like this. Oya, i cant send file via cable data
AnjayJr17 said:
And when on twrp, lcd always like this. Oya, i cant send file via cable data
Click to expand...
Click to collapse
Previously what ROM you had? MIUI 11? if yes you need to downgrade to MIUI 9 (Nougat), then flash the TWRP, and last install again the ROM with clean flash.
AnjayJr17 said:
And when on twrp, lcd always like this. Oya, i cant send file via cable data
Click to expand...
Click to collapse
You are using oreo firmware so downgrade to nougat firmware and try again
Is it safe to install custom rom in android
Ffjut said:
Is it safe to install custom rom in android
Click to expand...
Click to collapse
It depends
I'm loving your custom rom, using it now but there are bugs that I encountered. When accessing notifications, the current app that is running just closed for no reason like it redirects me to home. Also, when I'm using an app that involve playing media or just regular stuff and when I swipe up, It just go to recent apps that is running (when I'm holding my thumb to screen) and when I quickly swipe up it redirects me to home (the current app closes). Animations is kinda bit weird when you access notifications slowly(swipe down) or accessing apps, the app logos are buggy(it multiplies).
UPDATE - WaveOS v4.3 is here! [Unified] [Redmi 4A/5A
WaveOS_rolex-riva-R-v4.3-20210419-0457-OFFICIAL-signed.zip
Download: https://sourceforge.net/projects/wa....3-20210419-0457-OFFICIAL-signed.zip/download
Source Changelog:
https://raw.githubusercontent.com/Wave-Project/stuff/main/changelog.txt
Device Changelog:
- Fixed Full-Disk Encryption thanks to @zer0def
- Switched to Vanilla Varient
- audio: Update upto LA.UM.9.6.2.r1-03300-89xx.0
- audio: Update mixer_paths from LA.UM.9.6.2.r1-03300-89xx.0
- Switch to New AIDL Power HAL
- Update CarrierConfig from LA.UM.9.6.2.r1-03300-89xx.0
- Fix device manufacturer & model exif value in Camera apps thanks to iusmac for PR
- Set lmkd configuration properties
- Update Power Profile overlay
- Configure PSI for low_ram device
Kernel Changelog:
- Rebase kernel
- Upstream to linux-v4.9.266
- Merge CAF tag LA.UM.9.6.2.r1-04200-89xx.0
- Stabilize deepsleep
- Switch to PSI
- Enable MEMCG and MEMCG Swap
- Add PEWQ's to a few subsystems
- And many more misc improvements
Cheers and #NeverBetter!
I liked it for its smoothness. Its a perfect lightweight os for my old redmi 5A.
Is it safe for banking transaction? thx
Мне нужен пароль
i like mi quick ball app can any method to use this app like system app please in this rom